Ver código fonte

Convert to use fsl_esdhc_imx for i.MX platforms

Converted to use fsl_esdhc_imx for i.MX platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
Yangbo Lu 4 anos atrás
pai
commit
e37ac717d7
100 arquivos alterados com 173 adições e 173 exclusões
  1. 5 5
      arch/arm/cpu/arm1136/mx35/generic.c
  2. 4 4
      arch/arm/cpu/arm926ejs/mx25/generic.c
  3. 5 5
      arch/arm/cpu/armv7/vf610/generic.c
  4. 1 1
      arch/arm/cpu/armv8/s32v234/generic.c
  5. 1 1
      arch/arm/include/asm/global_data.h
  6. 3 3
      arch/arm/mach-imx/cpu.c
  7. 2 2
      arch/arm/mach-imx/mx6/litesom.c
  8. 2 2
      arch/arm/mach-imx/mx7/clock.c
  9. 1 1
      arch/arm/mach-imx/mx7ulp/clock.c
  10. 2 2
      arch/arm/mach-imx/speed.c
  11. 1 1
      arch/m68k/cpu/mcf5445x/cpu_init.c
  12. 2 2
      board/advantech/dms-ba16/dms-ba16.c
  13. 1 1
      board/aristainetos/aristainetos-v1.c
  14. 1 1
      board/aristainetos/aristainetos-v2.c
  15. 2 2
      board/aristainetos/aristainetos.c
  16. 1 1
      board/bachmann/ot1200/ot1200.c
  17. 1 1
      board/barco/platinum/platinum.c
  18. 2 2
      board/barco/titanium/titanium.c
  19. 2 2
      board/boundary/nitrogen6x/nitrogen6x.c
  20. 1 1
      board/ccv/xpress/xpress.c
  21. 3 3
      board/compulab/cl-som-imx7/cl-som-imx7.c
  22. 3 3
      board/compulab/cl-som-imx7/common.c
  23. 4 4
      board/compulab/cl-som-imx7/common.h
  24. 4 4
      board/compulab/cl-som-imx7/mux.c
  25. 3 3
      board/compulab/cl-som-imx7/spl.c
  26. 2 2
      board/compulab/cm_fx6/cm_fx6.c
  27. 2 2
      board/compulab/cm_fx6/common.c
  28. 1 1
      board/compulab/cm_fx6/spl.c
  29. 2 2
      board/congatec/cgtqmx6eval/cgtqmx6eval.c
  30. 1 1
      board/dhelectronics/dh_imx6/dh_imx6.c
  31. 1 1
      board/dhelectronics/dh_imx6/dh_imx6_spl.c
  32. 2 2
      board/el/el6x/el6x.c
  33. 2 2
      board/embest/mx6boards/mx6boards.c
  34. 1 1
      board/freescale/imx8mq_evk/imx8mq_evk.c
  35. 1 1
      board/freescale/imx8mq_evk/spl.c
  36. 1 1
      board/freescale/imx8qxp_mek/imx8qxp_mek.c
  37. 1 1
      board/freescale/m54418twr/m54418twr.c
  38. 3 3
      board/freescale/mx25pdk/mx25pdk.c
  39. 2 2
      board/freescale/mx35pdk/mx35pdk.c
  40. 3 3
      board/freescale/mx51evk/mx51evk.c
  41. 2 2
      board/freescale/mx53ard/mx53ard.c
  42. 2 2
      board/freescale/mx53evk/mx53evk.c
  43. 2 2
      board/freescale/mx53loco/mx53loco.c
  44. 2 2
      board/freescale/mx53smd/mx53smd.c
  45. 2 2
      board/freescale/mx6qarm2/mx6qarm2.c
  46. 2 2
      board/freescale/mx6sabreauto/mx6sabreauto.c
  47. 2 2
      board/freescale/mx6sabresd/mx6sabresd.c
  48. 1 1
      board/freescale/mx6slevk/mx6slevk.c
  49. 1 1
      board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
  50. 1 1
      board/freescale/mx6sxsabresd/mx6sxsabresd.c
  51. 2 2
      board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
  52. 1 1
      board/freescale/mx6ullevk/mx6ullevk.c
  53. 1 1
      board/freescale/mx7dsabresd/mx7dsabresd.c
  54. 2 2
      board/freescale/s32v234evb/s32v234evb.c
  55. 2 2
      board/freescale/vf610twr/vf610twr.c
  56. 3 3
      board/gateworks/gw_ventana/common.c
  57. 1 1
      board/gateworks/gw_ventana/gw_ventana.c
  58. 1 1
      board/ge/bx50v3/bx50v3.c
  59. 1 1
      board/ge/mx53ppd/mx53ppd.c
  60. 2 2
      board/grinn/liteboard/board.c
  61. 1 1
      board/inversepath/usbarmory/usbarmory.c
  62. 2 2
      board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
  63. 1 1
      board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
  64. 1 1
      board/kosagi/novena/novena.c
  65. 3 3
      board/kosagi/novena/novena_spl.c
  66. 1 1
      board/liebherr/display5/common.c
  67. 3 3
      board/liebherr/display5/display5.c
  68. 1 1
      board/liebherr/display5/spl.c
  69. 1 1
      board/liebherr/mccmon6/mccmon6.c
  70. 1 1
      board/liebherr/mccmon6/spl.c
  71. 2 2
      board/logicpd/imx6/imx6logic.c
  72. 2 2
      board/menlo/m53menlo/m53menlo.c
  73. 1 1
      board/phytec/pcl063/pcl063.c
  74. 3 3
      board/phytec/pcl063/spl.c
  75. 1 1
      board/phytec/pcm058/pcm058.c
  76. 1 1
      board/phytec/pfla02/pfla02.c
  77. 1 1
      board/seco/common/mx6.c
  78. 1 1
      board/seco/mx6quq7/mx6quq7.c
  79. 1 1
      board/sks-kinkel/sksimx6/sksimx6.c
  80. 1 1
      board/softing/vining_2000/vining_2000.c
  81. 1 1
      board/solidrun/mx6cuboxi/mx6cuboxi.c
  82. 3 3
      board/tbs/tbs2910/tbs2910.c
  83. 1 1
      board/technexion/pico-imx6ul/spl.c
  84. 1 1
      board/technexion/pico-imx7d/spl.c
  85. 3 3
      board/technologic/ts4800/ts4800.c
  86. 3 3
      board/toradex/apalis_imx6/apalis_imx6.c
  87. 3 3
      board/toradex/colibri_imx6/colibri_imx6.c
  88. 1 1
      board/toradex/colibri_imx7/colibri_imx7.c
  89. 1 1
      board/tqc/tqma6/tqma6.c
  90. 1 1
      board/tqc/tqma6/tqma6_mba6.c
  91. 1 1
      board/tqc/tqma6/tqma6_wru4.c
  92. 1 1
      board/udoo/neo/neo.c
  93. 1 1
      board/udoo/udoo.c
  94. 1 1
      board/udoo/udoo_spl.c
  95. 1 1
      board/variscite/dart_6ul/dart_6ul.c
  96. 1 1
      board/variscite/dart_6ul/spl.c
  97. 1 1
      board/wandboard/spl.c
  98. 1 1
      board/warp/warp.c
  99. 2 2
      board/woodburn/woodburn.c
  100. 1 1
      configs/apalis-imx8qm_defconfig

+ 5 - 5
arch/arm/cpu/arm1136/mx35/generic.c

@@ -14,8 +14,8 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
-#ifdef CONFIG_FSL_ESDHC
-#include <fsl_esdhc.h>
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
 #endif
 #include <netdev.h>
 #include <spl.h>
@@ -27,7 +27,7 @@
 
 #define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o))
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
@@ -446,7 +446,7 @@ int cpu_eth_init(bd_t *bis)
 	return rc;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 /*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()
@@ -459,7 +459,7 @@ int cpu_mmc_init(bd_t *bis)
 
 int get_clocks(void)
 {
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR

+ 4 - 4
arch/arm/cpu/arm926ejs/mx25/generic.c

@@ -16,8 +16,8 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 
-#ifdef CONFIG_FSL_ESDHC
-#include <fsl_esdhc.h>
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 #endif
@@ -233,7 +233,7 @@ int cpu_eth_init(bd_t *bis)
 
 int get_clocks(void)
 {
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE
 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 #else
@@ -243,7 +243,7 @@ int get_clocks(void)
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 /*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()

+ 5 - 5
arch/arm/cpu/armv7/vf610/generic.c

@@ -10,11 +10,11 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <netdev.h>
-#ifdef CONFIG_FSL_ESDHC
-#include <fsl_esdhc.h>
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
@@ -345,7 +345,7 @@ int cpu_eth_init(bd_t *bis)
 	return rc;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 int cpu_mmc_init(bd_t *bis)
 {
 	return fsl_esdhc_mmc_init(bis);
@@ -354,7 +354,7 @@ int cpu_mmc_init(bd_t *bis)
 
 int get_clocks(void)
 {
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 #endif
 	return 0;

+ 1 - 1
arch/arm/cpu/armv8/s32v234/generic.c

@@ -342,7 +342,7 @@ int cpu_eth_init(bd_t * bis)
 
 int get_clocks(void)
 {
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 	gd->arch.sdhc_clk = mxc_get_clock(MXC_USDHC_CLK);
 #endif
 	return 0;

+ 1 - 1
arch/arm/include/asm/global_data.h

@@ -9,7 +9,7 @@
 
 /* Architecture-specific global data */
 struct arch_global_data {
-#if defined(CONFIG_FSL_ESDHC)
+#if defined(CONFIG_FSL_ESDHC) || defined(CONFIG_FSL_ESDHC_IMX)
 	u32 sdhc_clk;
 #endif
 

+ 3 - 3
arch/arm/mach-imx/cpu.c

@@ -21,8 +21,8 @@
 #include <thermal.h>
 #include <sata.h>
 
-#ifdef CONFIG_FSL_ESDHC
-#include <fsl_esdhc.h>
+#ifdef CONFIG_FSL_ESDHC_IMX
+#include <fsl_esdhc_imx.h>
 #endif
 
 static u32 reset_cause = -1;
@@ -258,7 +258,7 @@ int cpu_eth_init(bd_t *bis)
 	return rc;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 /*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()

+ 2 - 2
arch/arm/mach-imx/mx6/litesom.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/io.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/sizes.h>
 #include <mmc.h>
 
@@ -49,7 +49,7 @@ static iomux_v3_cfg_t const emmc_pads[] = {
 	MX6_PAD_NAND_ALE__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg emmc_cfg = {USDHC2_BASE_ADDR, 0, 8};
 
 #define EMMC_PWR_GPIO	IMX_GPIO_NR(4, 10)

+ 2 - 2
arch/arm/mach-imx/mx7/clock.c

@@ -19,13 +19,13 @@ struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
 					 ANATOP_BASE_ADDR;
 struct mxc_ccm_reg *ccm_reg = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 int get_clocks(void)
 {
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR

+ 1 - 1
arch/arm/mach-imx/mx7ulp/clock.c

@@ -14,7 +14,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int get_clocks(void)
 {
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC0_RBASE
 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC1_RBASE

+ 2 - 2
arch/arm/mach-imx/speed.c

@@ -11,13 +11,13 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 int get_clocks(void)
 {
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #ifdef CONFIG_FSL_USDHC
 #if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
 	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);

+ 1 - 1
arch/m68k/cpu/mcf5445x/cpu_init.c

@@ -200,7 +200,7 @@ void cpu_init_f(void)
 	/* Lowest slew rate for UART0,1,2 */
 	out_8(&gpio->srcr_uart, 0x00);
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 	/* eSDHC pin as faster speed */
 	out_8(&gpio->srcr_sdhc, 0x03);
 

+ 2 - 2
board/advantech/dms-ba16/dms-ba16.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -221,7 +221,7 @@ static void setup_iomux_uart(void)
 	imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[3] = {
 	{USDHC2_BASE_ADDR},
 	{USDHC3_BASE_ADDR},

+ 1 - 1
board/aristainetos/aristainetos-v1.c

@@ -20,7 +20,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>

+ 1 - 1
board/aristainetos/aristainetos-v2.c

@@ -20,7 +20,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>

+ 2 - 2
board/aristainetos/aristainetos.c

@@ -20,7 +20,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -107,7 +107,7 @@ int dram_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[2] = {
 	{USDHC1_BASE_ADDR},
 	{USDHC2_BASE_ADDR},

+ 1 - 1
board/bachmann/ot1200/ot1200.c

@@ -18,7 +18,7 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/sys_proto.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <netdev.h>
 #include <i2c.h>
 #include <pca953x.h>

+ 1 - 1
board/barco/platinum/platinum.c

@@ -6,7 +6,7 @@
 
 #include <common.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/io.h>

+ 2 - 2
board/barco/titanium/titanium.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <micrel.h>
 #include <miiphy.h>
 #include <netdev.h>
@@ -215,7 +215,7 @@ int board_ehci_hcd_init(int port)
 
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[1] = {
 	{ USDHC3_BASE_ADDR },
 };

+ 2 - 2
board/boundary/nitrogen6x/nitrogen6x.c

@@ -21,7 +21,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <micrel.h>
 #include <miiphy.h>
 #include <netdev.h>
@@ -283,7 +283,7 @@ int board_ehci_power(int port, int on)
 
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg usdhc_cfg[2] = {
 	{USDHC3_BASE_ADDR},
 	{USDHC4_BASE_ADDR},

+ 1 - 1
board/ccv/xpress/xpress.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/io.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <miiphy.h>
 #include <mmc.h>

+ 3 - 3
board/compulab/cl-som-imx7/cl-som-imx7.c

@@ -12,7 +12,7 @@
 #include <mmc.h>
 #include <phy.h>
 #include <netdev.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <power/pmic.h>
 #include <power/pfuze3000_pmic.h>
 #include <asm/mach-imx/mxc_i2c.h>
@@ -68,7 +68,7 @@ int dram_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 #define CL_SOM_IMX7_GPIO_USDHC3_PWR	IMX_GPIO_NR(6, 11)
 
@@ -116,7 +116,7 @@ int board_mmc_init(bd_t *bis)
 
 	return 0;
 }
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 #ifdef CONFIG_FEC_MXC
 

+ 3 - 3
board/compulab/cl-som-imx7/common.c

@@ -8,7 +8,7 @@
  */
 
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm-generic/gpio.h>
 #include "common.h"
 
@@ -23,7 +23,7 @@ int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
 
 #endif /* CONFIG_SPI */
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 int board_mmc_getcd(struct mmc *mmc)
 {
@@ -42,4 +42,4 @@ int board_mmc_getcd(struct mmc *mmc)
 	return ret;
 }
 
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */

+ 4 - 4
board/compulab/cl-som-imx7/common.h

@@ -9,19 +9,19 @@
 
 #define PADS_SET_PROT(pads_array) void cl_som_imx7_##pads_array##_set(void)
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #define CL_SOM_IMX7_GPIO_USDHC1_CD	IMX_GPIO_NR(5, 0)
 PADS_SET_PROT(usdhc1_pads);
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 PADS_SET_PROT(uart1_pads);
 #ifdef CONFIG_SPI
 PADS_SET_PROT(espi1_pads);
 #endif /* CONFIG_SPI */
 
 #ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 PADS_SET_PROT(usdhc3_emmc_pads);
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 #ifdef CONFIG_FEC_MXC
 PADS_SET_PROT(phy1_rst_pads);
 PADS_SET_PROT(fec1_pads);

+ 4 - 4
board/compulab/cl-som-imx7/mux.c

@@ -17,7 +17,7 @@ void cl_som_imx7_##pads_array##_set(void)				       \
 	imx_iomux_v3_setup_multiple_pads(pads_array, ARRAY_SIZE(pads_array));  \
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 #define USDHC_PAD_CTRL		(PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
 				PAD_CTL_HYS | PAD_CTL_PUE | \
@@ -36,7 +36,7 @@ static iomux_v3_cfg_t const usdhc1_pads[] = {
 
 PADS_SET(usdhc1_pads)
 
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 #define UART_PAD_CTRL		(PAD_CTL_DSE_3P3V_49OHM | \
 				PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
@@ -69,7 +69,7 @@ PADS_SET(espi1_pads)
 
 #ifndef CONFIG_SPL_BUILD
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
 	MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -89,7 +89,7 @@ static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
 
 PADS_SET(usdhc3_emmc_pads)
 
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 #ifdef CONFIG_FEC_MXC
 

+ 3 - 3
board/compulab/cl-som-imx7/spl.c

@@ -9,14 +9,14 @@
 
 #include <common.h>
 #include <spl.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/arch-mx7/mx7-pins.h>
 #include <asm/arch-mx7/clock.h>
 #include <asm/arch-mx7/mx7-ddr.h>
 #include "common.h"
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = {
 	USDHC1_BASE_ADDR, 0, 4};
@@ -27,7 +27,7 @@ int board_mmc_init(bd_t *bis)
 	cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 	return fsl_esdhc_initialize(bis, &cl_som_imx7_spl_usdhc_cfg);
 }
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 static iomux_v3_cfg_t const led_pads[] = {
 	MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 | MUX_PAD_CTRL(PAD_CTL_PUS_PU5KOHM |

+ 2 - 2
board/compulab/cm_fx6/cm_fx6.c

@@ -12,7 +12,7 @@
 #include <dm.h>
 #include <dwc_ahsata.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <mtd_node.h>
 #include <netdev.h>
@@ -608,7 +608,7 @@ int board_init(void)
 	cm_fx6_setup_display();
 
 	/* This should be done in the MMC driver when MX6 has a clock driver */
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 	if (IS_ENABLED(CONFIG_BLK)) {
 		int i;
 

+ 2 - 2
board/compulab/cm_fx6/common.c

@@ -11,10 +11,10 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/spi.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include "common.h"
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
 	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
 	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)

+ 1 - 1
board/compulab/cm_fx6/spl.c

@@ -16,7 +16,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/mach-imx/iomux-v3.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include "common.h"
 
 enum ddr_config {

+ 2 - 2
board/congatec/cgtqmx6eval/cgtqmx6eval.c

@@ -21,7 +21,7 @@
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <input.h>
 #include <power/pmic.h>
@@ -411,7 +411,7 @@ static void setup_spi(void)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg usdhc_cfg[] = {
 	{USDHC2_BASE_ADDR},
 	{USDHC3_BASE_ADDR},

+ 1 - 1
board/dhelectronics/dh_imx6/dh_imx6.c

@@ -24,7 +24,7 @@
 #include <dwc_ahsata.h>
 #include <environment.h>
 #include <errno.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <fuse.h>
 #include <i2c.h>
 #include <miiphy.h>

+ 1 - 1
board/dhelectronics/dh_imx6/dh_imx6_spl.c

@@ -20,7 +20,7 @@
 #include <asm/io.h>
 #include <errno.h>
 #include <fuse.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <spl.h>

+ 2 - 2
board/el/el6x/el6x.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -255,7 +255,7 @@ iomux_v3_cfg_t const usdhc4_pads[] = {
 	MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 };
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[2] = {
 	{USDHC2_BASE_ADDR},
 	{USDHC4_BASE_ADDR},

+ 2 - 2
board/embest/mx6boards/mx6boards.c

@@ -27,7 +27,7 @@
 #include <i2c.h>
 #include <input.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -181,7 +181,7 @@ iomux_v3_cfg_t const usdhc4_pads[] = {
 	MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[3] = {
 	{USDHC2_BASE_ADDR},
 	{USDHC3_BASE_ADDR},

+ 1 - 1
board/freescale/imx8mq_evk/imx8mq_evk.c

@@ -11,7 +11,7 @@
 #include <netdev.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm-generic/gpio.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mmc.h>
 #include <asm/arch/imx8mq_pins.h>
 #include <asm/arch/sys_proto.h>

+ 1 - 1
board/freescale/imx8mq_evk/spl.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/gpio.h>
 #include <asm/mach-imx/mxc_i2c.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mmc.h>
 #include <power/pmic.h>
 #include <power/pfuze100_pmic.h>

+ 1 - 1
board/freescale/imx8qxp_mek/imx8qxp_mek.c

@@ -7,7 +7,7 @@
 #include <errno.h>
 #include <linux/libfdt.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <asm/arch/clock.h>

+ 1 - 1
board/freescale/m54418twr/m54418twr.c

@@ -9,7 +9,7 @@
 #include <asm/io.h>
 #include <asm/immap.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 

+ 3 - 3
board/freescale/mx25pdk/mx25pdk.c

@@ -12,7 +12,7 @@
 #include <asm/arch/iomux-mx25.h>
 #include <asm/arch/clock.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <power/pmic.h>
 #include <fsl_pmic.h>
@@ -24,7 +24,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{IMX_MMC_SDHC1_BASE},
 };
@@ -151,7 +151,7 @@ int board_late_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 int board_mmc_getcd(struct mmc *mmc)
 {
 	/* Set up the Card Detect pin. */

+ 2 - 2
board/freescale/mx35pdk/mx35pdk.c

@@ -16,7 +16,7 @@
 #include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mc9sdz60.h>
 #include <mc13892.h>
 #include <linux/types.h>
@@ -261,7 +261,7 @@ int board_eth_init(bd_t *bis)
 	return cpu_eth_init(bis);
 }
 
-#if defined(CONFIG_FSL_ESDHC)
+#if defined(CONFIG_FSL_ESDHC_IMX)
 
 struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
 

+ 3 - 3
board/freescale/mx51evk/mx51evk.c

@@ -16,7 +16,7 @@
 #include <i2c.h>
 #include <input.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
@@ -24,7 +24,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR},
 	{MMC_SDHC2_BASE_ADDR},
@@ -262,7 +262,7 @@ static void power_init(void)
 	gpio_set_value(IMX_GPIO_NR(2, 14), 1);
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;

+ 2 - 2
board/freescale/mx53ard/mx53ard.c

@@ -13,7 +13,7 @@
 #include <linux/errno.h>
 #include <netdev.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/gpio.h>
 
 #define ETHERNET_INT		IMX_GPIO_NR(2, 31)
@@ -112,7 +112,7 @@ static void setup_iomux_uart(void)
 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR},
 	{MMC_SDHC2_BASE_ADDR},

+ 2 - 2
board/freescale/mx53evk/mx53evk.c

@@ -15,7 +15,7 @@
 #include <netdev.h>
 #include <i2c.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <power/pmic.h>
 #include <fsl_pmic.h>
 #include <asm/gpio.h>
@@ -137,7 +137,7 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR},
 	{MMC_SDHC3_BASE_ADDR},

+ 2 - 2
board/freescale/mx53loco/mx53loco.c

@@ -18,7 +18,7 @@
 #include <i2c.h>
 #include <input.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/gpio.h>
 #include <power/pmic.h>
 #include <dialog_pmic.h>
@@ -92,7 +92,7 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR},
 	{MMC_SDHC3_BASE_ADDR},

+ 2 - 2
board/freescale/mx53smd/mx53smd.c

@@ -13,7 +13,7 @@
 #include <linux/errno.h>
 #include <netdev.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -77,7 +77,7 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{MMC_SDHC1_BASE_ADDR},
 };

+ 2 - 2
board/freescale/mx6qarm2/mx6qarm2.c

@@ -12,7 +12,7 @@
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <usb.h>
@@ -103,7 +103,7 @@ static void setup_iomux_enet(void)
 	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[2] = {
 	{USDHC3_BASE_ADDR},
 	{USDHC4_BASE_ADDR},

+ 2 - 2
board/freescale/mx6sabreauto/mx6sabreauto.c

@@ -18,7 +18,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/spi.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/sys_proto.h>
@@ -282,7 +282,7 @@ static void setup_iomux_uart(void)
 	SETUP_IOMUX_PADS(uart4_pads);
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg usdhc_cfg[1] = {
 	{USDHC3_BASE_ADDR},
 };

+ 2 - 2
board/freescale/mx6sabresd/mx6sabresd.c

@@ -17,7 +17,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -250,7 +250,7 @@ static void setup_iomux_uart(void)
 	SETUP_IOMUX_PADS(uart1_pads);
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[3] = {
 	{USDHC2_BASE_ADDR},
 	{USDHC3_BASE_ADDR},

+ 1 - 1
board/freescale/mx6slevk/mx6slevk.c

@@ -19,7 +19,7 @@
 #include <asm/io.h>
 #include <linux/sizes.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <netdev.h>

+ 1 - 1
board/freescale/mx6sxsabreauto/mx6sxsabreauto.c

@@ -17,7 +17,7 @@
 #include <asm/io.h>
 #include <linux/sizes.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <power/pmic.h>

+ 1 - 1
board/freescale/mx6sxsabresd/mx6sxsabresd.c

@@ -17,7 +17,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <linux/sizes.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mmc.h>
 #include <i2c.h>
 #include <miiphy.h>

+ 2 - 2
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/io.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <miiphy.h>
 #include <linux/sizes.h>
@@ -189,7 +189,7 @@ static int board_qspi_init(void)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg usdhc_cfg[2] = {
 	{USDHC1_BASE_ADDR, 0, 4},
 #if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)

+ 1 - 1
board/freescale/mx6ullevk/mx6ullevk.c

@@ -14,7 +14,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/io.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/sizes.h>
 #include <mmc.h>
 

+ 1 - 1
board/freescale/mx7dsabresd/mx7dsabresd.c

@@ -12,7 +12,7 @@
 #include <asm/io.h>
 #include <linux/sizes.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mmc.h>
 #include <miiphy.h>
 #include <netdev.h>

+ 2 - 2
board/freescale/s32v234evb/s32v234evb.c

@@ -10,7 +10,7 @@
 #include <asm/arch/lpddr2.h>
 #include <asm/arch/clock.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <i2c.h>
@@ -74,7 +74,7 @@ void setup_iomux_nfc(void)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{USDHC_BASE_ADDR},
 };

+ 2 - 2
board/freescale/vf610twr/vf610twr.c

@@ -11,7 +11,7 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/clock.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <i2c.h>
@@ -234,7 +234,7 @@ static void setup_iomux_qspi(void)
 	imx_iomux_v3_setup_multiple_pads(qspi0_pads, ARRAY_SIZE(qspi0_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{ESDHC1_BASE_ADDR},
 };

+ 3 - 3
board/gateworks/gw_ventana/common.c

@@ -10,7 +10,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/mxc_i2c.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <hwconfig.h>
 #include <power/pmic.h>
 #include <power/ltc3676_pmic.h>
@@ -1656,7 +1656,7 @@ void setup_pmic(void)
 	}
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg usdhc_cfg[2];
 
 int board_mmc_init(bd_t *bis)
@@ -1753,4 +1753,4 @@ int board_mmc_getcd(struct mmc *mmc)
 	return -1;
 }
 
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */

+ 1 - 1
board/gateworks/gw_ventana/gw_ventana.c

@@ -25,7 +25,7 @@
 #include <hwconfig.h>
 #include <i2c.h>
 #include <fdt_support.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <jffs2/load_kernel.h>
 #include <linux/ctype.h>
 #include <miiphy.h>

+ 1 - 1
board/ge/bx50v3/bx50v3.c

@@ -17,7 +17,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <net.h>
 #include <netdev.h>

+ 1 - 1
board/ge/mx53ppd/mx53ppd.c

@@ -24,7 +24,7 @@
 #include <netdev.h>
 #include <i2c.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/gpio.h>
 #include <power/pmic.h>
 #include <dialog_pmic.h>

+ 2 - 2
board/grinn/liteboard/board.c

@@ -17,7 +17,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/io.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/sizes.h>
 #include <linux/fb.h>
 #include <miiphy.h>
@@ -66,7 +66,7 @@ static void setup_iomux_uart(void)
 	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg sd_cfg = {USDHC1_BASE_ADDR, 0, 4};
 
 #define SD_CD_GPIO	IMX_GPIO_NR(1, 19)

+ 1 - 1
board/inversepath/usbarmory/usbarmory.c

@@ -17,7 +17,7 @@
 #include <linux/errno.h>
 #include <i2c.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;

+ 2 - 2
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c

@@ -18,7 +18,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/mxc_i2c.h>
 #include <errno.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <fuse.h>
 #include <i2c.h>
 #include <miiphy.h>
@@ -166,7 +166,7 @@ int board_phy_config(struct phy_device *phydev)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 #define USDHC2_CD_GPIO	IMX_GPIO_NR(1, 4)
 static struct fsl_esdhc_cfg usdhc_cfg[] = {

+ 1 - 1
board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c

@@ -20,7 +20,7 @@
 #include <asm/io.h>
 #include <errno.h>
 #include <fuse.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <spl.h>

+ 1 - 1
board/kosagi/novena/novena.c

@@ -25,7 +25,7 @@
 #include <asm/mach-imx/video.h>
 #include <dwc_ahsata.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <input.h>
 #include <ipu_pixfmt.h>

+ 3 - 3
board/kosagi/novena/novena_spl.c

@@ -19,7 +19,7 @@
 #include <asm/arch/crm_regs.h>
 #include <i2c.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <spl.h>
 
 #include <asm/arch/mx6-ddr.h>
@@ -404,7 +404,7 @@ static inline void novena_spl_setup_iomux_video(void) {}
 /*
  * SPL boots from uSDHC card
  */
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 static struct fsl_esdhc_cfg usdhc_cfg = {
 	USDHC3_BASE_ADDR, 0, 4
 };
@@ -566,7 +566,7 @@ void board_init_f(ulong dummy)
 #ifdef CONFIG_BOARD_POSTCLK_INIT
 	board_postclk_init();
 #endif
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 	get_clocks();
 #endif
 

+ 1 - 1
board/liebherr/display5/common.c

@@ -89,7 +89,7 @@ void displ5_set_iomux_ecspi_spl(void) {}
 void displ5_set_iomux_ecspi(void) {}
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 iomux_v3_cfg_t const usdhc4_pads[] = {
 	MX6_PAD_SD4_CLK__SD4_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6_PAD_SD4_CMD__SD4_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL),

+ 3 - 3
board/liebherr/display5/display5.c

@@ -21,7 +21,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/spi.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <i2c.h>
@@ -186,7 +186,7 @@ iomux_v3_cfg_t const misc_pads[] = {
 	MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[1] = {
 	{ USDHC4_BASE_ADDR, 0, 8, },
 };
@@ -204,7 +204,7 @@ int board_mmc_init(bd_t *bis)
 
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 static void displ5_setup_ecspi(void)
 {

+ 1 - 1
board/liebherr/display5/spl.c

@@ -18,7 +18,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/gpio.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <netdev.h>
 #include <bootcount.h>
 #include <watchdog.h>

+ 1 - 1
board/liebherr/mccmon6/mccmon6.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/spi.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/io.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mmc.h>
 #include <netdev.h>
 #include <micrel.h>

+ 1 - 1
board/liebherr/mccmon6/spl.c

@@ -14,7 +14,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>

+ 2 - 2
board/logicpd/imx6/imx6logic.c

@@ -12,7 +12,7 @@
 #include <miiphy.h>
 #include <input.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <linux/sizes.h>
@@ -200,7 +200,7 @@ static iomux_v3_cfg_t const usdhc2_pads[] = {
 	MX6_PAD_GPIO_4__GPIO1_IO04	| MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[] = {
 	{USDHC1_BASE_ADDR}, /* SOM */
 	{USDHC2_BASE_ADDR}  /* Baseboard */

+ 2 - 2
board/menlo/m53menlo/m53menlo.c

@@ -18,7 +18,7 @@
 #include <asm/gpio.h>
 #include <asm/spl.h>
 #include <fdt_support.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <ipu_pixfmt.h>
 #include <linux/errno.h>
@@ -150,7 +150,7 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg = {
 	MMC_SDHC1_BASE_ADDR,
 };

+ 1 - 1
board/phytec/pcl063/pcl063.c

@@ -12,7 +12,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/mxc_i2c.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/bitops.h>
 #include <miiphy.h>
 #include <netdev.h>

+ 3 - 3
board/phytec/pcl063/spl.c

@@ -14,7 +14,7 @@
 #include <asm/arch/mx6-pins.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/sys_proto.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 
 /* Configuration for Micron MT41K256M16TW-107 IT:P, 32M x 16 x 8 -> 256MiB */
 
@@ -101,7 +101,7 @@ static void spl_dram_init(void)
 	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 
 #define USDHC_PAD_CTRL (PAD_CTL_PKE         | PAD_CTL_PUE       | \
 			PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW | \
@@ -205,7 +205,7 @@ void board_boot_order(u32 *spl_boot_list)
 
 	spl_boot_list[0] = boot_dev;
 }
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 void board_init_f(ulong dummy)
 {

+ 1 - 1
board/phytec/pcm058/pcm058.c

@@ -25,7 +25,7 @@
 #include <asm/gpio.h>
 #include <mmc.h>
 #include <i2c.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <nand.h>
 #include <miiphy.h>
 #include <netdev.h>

+ 1 - 1
board/phytec/pfla02/pfla02.c

@@ -19,7 +19,7 @@
 #include <asm/gpio.h>
 #include <mmc.h>
 #include <i2c.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <nand.h>
 #include <miiphy.h>
 #include <netdev.h>

+ 1 - 1
board/seco/common/mx6.c

@@ -16,7 +16,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>

+ 1 - 1
board/seco/mx6quq7/mx6quq7.c

@@ -17,7 +17,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <malloc.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>

+ 1 - 1
board/sks-kinkel/sksimx6/sksimx6.c

@@ -12,7 +12,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>

+ 1 - 1
board/softing/vining_2000/vining_2000.c

@@ -19,7 +19,7 @@
 #include <linux/sizes.h>
 #include <common.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mmc.h>
 #include <i2c.h>
 #include <miiphy.h>

+ 1 - 1
board/solidrun/mx6cuboxi/mx6cuboxi.c

@@ -24,7 +24,7 @@
 #include <asm/mach-imx/sata.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <malloc.h>
 #include <miiphy.h>
 #include <netdev.h>

+ 3 - 3
board/tbs/tbs2910/tbs2910.c

@@ -13,7 +13,7 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -98,7 +98,7 @@ static void setup_iomux_uart(void)
 	imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 /* set environment device to boot device when booting from SD */
 int board_mmc_get_env_dev(int devno)
 {
@@ -109,7 +109,7 @@ int board_mmc_get_env_part(int devno)
 {
 	return (devno == 3) ? 1 : 0; /* part 0 for SD2 / SD3, part 1 for eMMC */
 }
-#endif /* CONFIG_FSL_ESDHC */
+#endif /* CONFIG_FSL_ESDHC_IMX */
 
 #ifdef CONFIG_VIDEO_IPUV3
 static void do_enable_hdmi(struct display_info_t const *dev)

+ 1 - 1
board/technexion/pico-imx6ul/spl.c

@@ -10,7 +10,7 @@
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/libfdt.h>
 #include <spl.h>
 

+ 1 - 1
board/technexion/pico-imx7d/spl.c

@@ -13,7 +13,7 @@
 #include <asm/arch-mx7/mx7-ddr.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/gpio.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <spl.h>
 
 #if defined(CONFIG_SPL_BUILD)

+ 3 - 3
board/technologic/ts4800/ts4800.c

@@ -19,7 +19,7 @@
 #include <environment.h>
 #include <mmc.h>
 #include <input.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <mc13892.h>
 
 #include <malloc.h>
@@ -29,7 +29,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR},
 	{MMC_SDHC2_BASE_ADDR},
@@ -96,7 +96,7 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;

+ 3 - 3
board/toradex/apalis_imx6/apalis_imx6.c

@@ -27,7 +27,7 @@
 #include <dm/platform_data/serial_mxc.h>
 #include <dwc_ahsata.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <imx_thermal.h>
 #include <micrel.h>
 #include <miiphy.h>
@@ -131,7 +131,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = {
 	MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL),
 	MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(WEAK_PULLUP) | MUX_MODE_SION,
 };
-#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
 
 int mx6_rgmii_rework(struct phy_device *phydev)
 {
@@ -355,7 +355,7 @@ int board_mmc_init(bd_t *bis)
 
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
-#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
 
 int board_phy_config(struct phy_device *phydev)
 {

+ 3 - 3
board/toradex/colibri_imx6/colibri_imx6.c

@@ -25,7 +25,7 @@
 #include <cpu.h>
 #include <dm/platform_data/serial_mxc.h>
 #include <environment.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <imx_thermal.h>
 #include <micrel.h>
 #include <miiphy.h>
@@ -110,7 +110,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = {
 	MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_EMMC_PAD_CTRL),
 	MX6_PAD_SD3_RST__SD3_RESET  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 };
-#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
 
 iomux_v3_cfg_t const enet_pads[] = {
 	MX6_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -361,7 +361,7 @@ int board_mmc_init(bd_t *bis)
 
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
-#endif /* CONFIG_FSL_ESDHC & CONFIG_SPL_BUILD */
+#endif /* CONFIG_FSL_ESDHC_IMX & CONFIG_SPL_BUILD */
 
 int board_phy_config(struct phy_device *phydev)
 {

+ 1 - 1
board/toradex/colibri_imx7/colibri_imx7.c

@@ -15,7 +15,7 @@
 #include <dm.h>
 #include <dm/platform_data/serial_mxc.h>
 #include <fdt_support.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <jffs2/load_kernel.h>
 #include <linux/sizes.h>
 #include <mmc.h>

+ 1 - 1
board/tqc/tqma6/tqma6.c

@@ -18,7 +18,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/spi.h>
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/libfdt.h>
 #include <i2c.h>
 #include <mmc.h>

+ 1 - 1
board/tqc/tqma6/tqma6_mba6.c

@@ -18,7 +18,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/libfdt.h>
 #include <malloc.h>
 #include <i2c.h>

+ 1 - 1
board/tqc/tqma6/tqma6_wru4.c

@@ -21,7 +21,7 @@
 #include <asm/mach-imx/mxc_i2c.h>
 
 #include <common.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/libfdt.h>
 #include <malloc.h>
 #include <i2c.h>

+ 1 - 1
board/udoo/neo/neo.c

@@ -16,7 +16,7 @@
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/mach-imx/mxc_i2c.h>

+ 1 - 1
board/udoo/udoo.c

@@ -15,7 +15,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/sata.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>

+ 1 - 1
board/udoo/udoo_spl.c

@@ -15,7 +15,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>

+ 1 - 1
board/variscite/dart_6ul/dart_6ul.c

@@ -10,7 +10,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/mxc_i2c.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/bitops.h>
 #include <miiphy.h>
 #include <netdev.h>

+ 1 - 1
board/variscite/dart_6ul/spl.c

@@ -11,7 +11,7 @@
 #include <asm/arch/mx6-ddr.h>
 #include <asm/arch/mx6-pins.h>
 #include <asm/arch/crm_regs.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 
 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
 	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\

+ 1 - 1
board/wandboard/spl.c

@@ -14,7 +14,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>

+ 1 - 1
board/warp/warp.c

@@ -19,7 +19,7 @@
 #include <linux/sizes.h>
 #include <common.h>
 #include <watchdog.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <usb.h>

+ 2 - 2
board/woodburn/woodburn.c

@@ -17,7 +17,7 @@
 #include <fsl_pmic.h>
 #include <mc13892.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <linux/types.h>
 #include <asm/gpio.h>
 #include <asm/arch/sys_proto.h>
@@ -206,7 +206,7 @@ int board_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_FSL_ESDHC)
+#if defined(CONFIG_FSL_ESDHC_IMX)
 struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
 
 int board_mmc_init(bd_t *bis)

+ 1 - 1
configs/apalis-imx8qm_defconfig

@@ -35,7 +35,7 @@ CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_IMX_LPI2C=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
+CONFIG_FSL_ESDHC_IMX=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_MICREL=y

Alguns arquivos não foram mostrados porque muitos arquivos mudaram nesse diff