Browse Source

Coding Style cleanup: replace leading SPACEs by TABs

Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
Wolfgang Denk 10 years ago
parent
commit
93e1459641
100 changed files with 437 additions and 437 deletions
  1. 2 2
      MAKEALL
  2. 10 10
      README
  3. 1 1
      arch/arm/config.mk
  4. 22 22
      arch/arm/cpu/armv7/mx5/lowlevel_init.S
  5. 1 1
      arch/arm/dts/exynos5250.dtsi
  6. 2 2
      arch/arm/lib/relocate.S
  7. 1 1
      arch/blackfin/cpu/traps.c
  8. 1 1
      arch/blackfin/include/asm/mach-common/bits/lockbox.h
  9. 1 1
      arch/m68k/lib/traps.c
  10. 1 1
      arch/nios2/cpu/epcs.c
  11. 1 1
      arch/nios2/lib/libgcc.c
  12. 2 2
      arch/openrisc/cpu/cpu.c
  13. 5 5
      arch/powerpc/cpu/mpc83xx/cpu_init.c
  14. 2 2
      arch/powerpc/cpu/mpc83xx/pci.c
  15. 2 2
      arch/powerpc/cpu/ppc4xx/4xx_pci.c
  16. 1 1
      board/Barix/ipam390/README.ipam390
  17. 2 2
      board/altera/common/sevenseg.c
  18. 26 26
      board/boundary/nitrogen6x/6x_upgrade.txt
  19. 5 5
      board/chromebook-x86/dts/alex.dts
  20. 5 5
      board/chromebook-x86/dts/link.dts
  21. 2 2
      board/cobra5272/bdm/cobra5272_uboot.gdb
  22. 1 1
      board/cogent/flash.c
  23. 3 3
      board/cray/L1/bootscript.hush
  24. 1 1
      board/esd/common/lcd.h
  25. 1 1
      board/esd/cpci750/ide.c
  26. 1 1
      board/esd/cpci750/pci.c
  27. 6 6
      board/etin/debris/flash.c
  28. 7 7
      board/evb64260/flash.c
  29. 2 2
      board/evb64260/mpsc.c
  30. 2 2
      board/fads/fads.c
  31. 1 1
      board/freescale/b4860qds/tlb.c
  32. 5 5
      board/freescale/bsc9132qds/README
  33. 2 2
      board/freescale/mpc8313erdb/mpc8313erdb.c
  34. 2 2
      board/freescale/mpc8360emds/mpc8360emds.c
  35. 3 3
      board/funkwerk/vovpn-gw/vovpn-gw.c
  36. 1 1
      board/gen860t/flash.c
  37. 2 2
      board/incaip/incaip.c
  38. 1 1
      board/matrix_vision/mvbc_p/Makefile
  39. 1 1
      board/matrix_vision/mvsmr/Makefile
  40. 61 61
      board/openrisc/openrisc-generic/or1ksim.cfg
  41. 1 1
      board/ppmc8260/strataflash.c
  42. 3 3
      board/pxa255_idp/pxa_reg_calcs.py
  43. 1 1
      board/rbc823/rbc823.c
  44. 3 3
      board/samsung/dts/exynos5250-snow.dts
  45. 1 1
      board/svm_sc8xx/svm_sc8xx.c
  46. 1 1
      boards.cfg
  47. 3 3
      common/cmd_bmp.c
  48. 1 1
      common/main.c
  49. 1 1
      config.mk
  50. 2 2
      doc/DocBook/Makefile
  51. 17 17
      doc/README.ext4
  52. 3 3
      doc/README.kwbimage
  53. 1 1
      doc/README.mxc_hab
  54. 12 12
      doc/README.mxsimage
  55. 1 1
      doc/README.nokia_rx51
  56. 5 5
      doc/README.ramboot-ppc85xx
  57. 12 12
      doc/README.trace
  58. 2 2
      doc/README.ubi
  59. 9 9
      doc/README.zfs
  60. 12 12
      doc/driver-model/UDM-cores.txt
  61. 6 6
      doc/driver-model/UDM-design.txt
  62. 2 2
      doc/driver-model/UDM-gpio.txt
  63. 5 5
      doc/driver-model/UDM-hwmon.txt
  64. 3 3
      doc/driver-model/UDM-mmc.txt
  65. 6 6
      doc/driver-model/UDM-power.txt
  66. 13 13
      doc/driver-model/UDM-rtc.txt
  67. 6 6
      doc/driver-model/UDM-spi.txt
  68. 14 14
      doc/driver-model/UDM-stdio.txt
  69. 1 1
      doc/driver-model/UDM-tpm.txt
  70. 3 3
      doc/driver-model/UDM-watchdog.txt
  71. 10 10
      drivers/mtd/nand/fsl_elbc_spl.c
  72. 4 4
      drivers/mtd/nand/fsl_upm.c
  73. 1 1
      drivers/mtd/nand/nand_base.c
  74. 2 2
      drivers/mtd/nand/nand_util.c
  75. 2 2
      drivers/mtd/ubi/crc32.c
  76. 1 1
      drivers/net/dm9000x.c
  77. 1 1
      drivers/net/plb2800_eth.c
  78. 1 1
      drivers/rtc/bfin_rtc.c
  79. 1 1
      drivers/rtc/pl031.c
  80. 2 2
      drivers/spi/mpc8xxx_spi.c
  81. 5 5
      drivers/spi/omap3_spi.c
  82. 1 1
      drivers/video/ati_radeon_fb.h
  83. 1 1
      fs/ubifs/super.c
  84. 1 1
      include/configs/DU440.h
  85. 1 1
      include/configs/P3G4.h
  86. 3 3
      include/configs/RBC823.h
  87. 1 1
      include/configs/alpr.h
  88. 2 2
      include/configs/devkit8000.h
  89. 1 1
      include/configs/p3mx.h
  90. 1 1
      include/configs/p3p440.h
  91. 1 1
      include/configs/pcs440ep.h
  92. 2 2
      include/configs/pdnb3.h
  93. 1 1
      include/configs/uc100.h
  94. 2 2
      include/configs/zeus.h
  95. 17 17
      include/ddr_spd.h
  96. 1 1
      nand_spl/nand_boot_fsl_elbc.c
  97. 1 1
      post/lib_powerpc/andi.c
  98. 16 16
      post/lib_powerpc/cpu_asm.h
  99. 3 3
      post/lib_powerpc/rlwimi.c
  100. 3 3
      post/lib_powerpc/rlwinm.c

+ 2 - 2
MAKEALL

@@ -38,8 +38,8 @@ usage()
 	  BUILD_NCPUS      number of parallel make jobs (default: auto)
 	  CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
 	  CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
-	                   architecture "ARCH".  Substitute "ARCH" for any
-	                   supported architecture (default: "")
+			   architecture "ARCH".  Substitute "ARCH" for any
+			   supported architecture (default: "")
 	  MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
 	  BUILD_DIR        output build directory (default: ./)
 	  BUILD_NBUILDS	   number of parallel targets (default: 1)

+ 10 - 10
README

@@ -944,10 +944,10 @@ The following options need to be configured:
 
 - Regular expression support:
 		CONFIG_REGEX
-                If this variable is defined, U-Boot is linked against
-                the SLRE (Super Light Regular Expression) library,
-                which adds regex support to some commands, as for
-                example "env grep" and "setexpr".
+		If this variable is defined, U-Boot is linked against
+		the SLRE (Super Light Regular Expression) library,
+		which adds regex support to some commands, as for
+		example "env grep" and "setexpr".
 
 - Device tree:
 		CONFIG_OF_CONTROL
@@ -1096,8 +1096,8 @@ The following options need to be configured:
 		devices.
 		CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
 
-                The environment variable 'scsidevs' is set to the number of
-                SCSI devices found during the last scan.
+		The environment variable 'scsidevs' is set to the number of
+		SCSI devices found during the last scan.
 
 - NETWORK Support (PCI):
 		CONFIG_E1000
@@ -1987,7 +1987,7 @@ CBFS (Coreboot Filesystem) support
 		    offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and
 		    CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first
 		    bus.
-                  - If your board supports a second fsl i2c bus, define
+		  - If your board supports a second fsl i2c bus, define
 		    CONFIG_SYS_FSL_I2C2_OFFSET for the register offset
 		    CONFIG_SYS_FSL_I2C2_SPEED for the speed and
 		    CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the
@@ -3191,9 +3191,9 @@ FIT uImage format:
 		CONFIG_TPL_PAD_TO
 		Image offset to which the TPL should be padded before appending
 		the TPL payload. By default, this is defined as
-                CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
-                CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
-                payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
+		CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
+		CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
+		payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
 
 Modem Support:
 --------------

+ 1 - 1
arch/arm/config.mk

@@ -17,7 +17,7 @@ endif
 
 LDFLAGS_FINAL += --gc-sections
 PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \
-                     -fno-common -ffixed-r9 -msoft-float
+		     -fno-common -ffixed-r9 -msoft-float
 
 # Support generic board on ARM
 __HAVE_ARCH_GENERIC_BOARD := y

+ 22 - 22
arch/arm/cpu/armv7/mx5/lowlevel_init.S

@@ -31,10 +31,10 @@
 
 	/* reconfigure L2 cache aux control reg */
 	ldr r0, =0xC0 |			/* tag RAM */ \
-	         0x4 |			/* data RAM */ \
-	         1 << 24 |		/* disable write allocate delay */ \
-	         1 << 23 |		/* disable write allocate combine */ \
-	         1 << 22		/* disable write allocate */
+		 0x4 |			/* data RAM */ \
+		 1 << 24 |		/* disable write allocate delay */ \
+		 1 << 23 |		/* disable write allocate combine */ \
+		 1 << 22		/* disable write allocate */
 
 #if defined(CONFIG_MX51)
 	ldr r3, [r4, #ROM_SI_REV]
@@ -290,20 +290,20 @@ setup_pll_func:
 
 	setup_pll PLL1_BASE_ADDR, 800
 
-        setup_pll PLL3_BASE_ADDR, 400
+	setup_pll PLL3_BASE_ADDR, 400
 
-        /* Switch peripheral to PLL3 */
-        ldr r0, =CCM_BASE_ADDR
-        ldr r1, =0x00015154
-        str r1, [r0, #CLKCTL_CBCMR]
-        ldr r1, =0x02898945
-        str r1, [r0, #CLKCTL_CBCDR]
-        /* make sure change is effective */
+	/* Switch peripheral to PLL3 */
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0x00015154
+	str r1, [r0, #CLKCTL_CBCMR]
+	ldr r1, =0x02898945
+	str r1, [r0, #CLKCTL_CBCDR]
+	/* make sure change is effective */
 1:      ldr r1, [r0, #CLKCTL_CDHIPR]
-        cmp r1, #0x0
-        bne 1b
+	cmp r1, #0x0
+	bne 1b
 
-        setup_pll PLL2_BASE_ADDR, 400
+	setup_pll PLL2_BASE_ADDR, 400
 
 	/* Switch peripheral to PLL2 */
 	ldr r0, =CCM_BASE_ADDR
@@ -324,7 +324,7 @@ setup_pll_func:
 	cmp r1, #0x0
 	bne 1b
 
-        setup_pll PLL3_BASE_ADDR, 216
+	setup_pll PLL3_BASE_ADDR, 216
 
 	setup_pll PLL4_BASE_ADDR, 455
 
@@ -358,13 +358,13 @@ setup_pll_func:
 	str r1, [r0, #CLKCTL_CCGR6]
 	str r1, [r0, #CLKCTL_CCGR7]
 
-        mov r1, #0x00000
-        str r1, [r0, #CLKCTL_CCDR]
+	mov r1, #0x00000
+	str r1, [r0, #CLKCTL_CCDR]
 
-        /* for cko - for ARM div by 8 */
-        mov r1, #0x000A0000
-        add r1, r1, #0x00000F0
-        str r1, [r0, #CLKCTL_CCOSR]
+	/* for cko - for ARM div by 8 */
+	mov r1, #0x000A0000
+	add r1, r1, #0x00000F0
+	str r1, [r0, #CLKCTL_CCOSR]
 
 #endif	/* CONFIG_MX53 */
 .endm

+ 1 - 1
arch/arm/dts/exynos5250.dtsi

@@ -140,7 +140,7 @@
 		reg = <0x12d40000 0x30>;
 		clock-frequency = <50000000>;
 		interrupts = <0 70 0>;
-        };
+	};
 
 	spi@131a0000 {
 		#address-cells = <1>;

+ 2 - 2
arch/arm/lib/relocate.S

@@ -66,9 +66,9 @@ relocate_done:
 	/* ARMv4- don't know bx lr but the assembler fails to see that */
 
 #ifdef __ARM_ARCH_4__
-        mov        pc, lr
+	mov        pc, lr
 #else
-        bx        lr
+	bx        lr
 #endif
 
 ENDPROC(relocate_code)

+ 1 - 1
arch/blackfin/cpu/traps.c

@@ -261,7 +261,7 @@ static void decode_address(char *buf, unsigned long address)
 	if (!address)
 		sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr);
 	else if (address >= CONFIG_SYS_MONITOR_BASE &&
-	         address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+		 address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 		sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr);
 	else
 		sprintf(buf, "<0x%p> /* unknown address */", paddr);

+ 1 - 1
arch/blackfin/include/asm/mach-common/bits/lockbox.h

@@ -16,7 +16,7 @@ typedef struct SESR_args {
 	unsigned long   ulMessageSize;      /* message length in bytes            */
 	unsigned long   ulSFEntryPoint;     /* entry point of secure function     */
 	unsigned long   ulMessagePtr;       /* pointer to the buffer containing
-	                                       the digital signature and message  */
+					       the digital signature and message  */
 	unsigned long   ulReserved1;        /* reserved                           */
 	unsigned long   ulReserved2;        /* reserved                           */
 } tSESR_args;

+ 1 - 1
arch/m68k/lib/traps.c

@@ -20,7 +20,7 @@ extern void _int_handler(void);
 static void show_frame(struct pt_regs *fp)
 {
 	printf ("Vector Number: %d  Format: %02x  Fault Status: %01x\n\n", (fp->vector & 0x3fc) >> 2,
-	        fp->format, (fp->vector & 0x3) | ((fp->vector & 0xc00) >> 8));
+		fp->format, (fp->vector & 0x3) | ((fp->vector & 0xc00) >> 8));
 	printf ("PC: %08lx    SR: %08lx    SP: %08lx\n", fp->pc, (long) fp->sr, (long) fp);
 	printf ("D0: %08lx    D1: %08lx    D2: %08lx    D3: %08lx\n",
 		fp->d0, fp->d1, fp->d2, fp->d3);

+ 1 - 1
arch/nios2/cpu/epcs.c

@@ -475,7 +475,7 @@ void do_epcs_info (struct epcs_devinfo_t *dev, int argc, char * const argv[])
 	printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n",
 		stat,
 		(stat & EPCS_STATUS_WIP) ? 1 : 0,
-	        (stat & EPCS_STATUS_WEL) ? 1 : 0,
+		(stat & EPCS_STATUS_WEL) ? 1 : 0,
 		(stat & dev->prot_mask) ? "on" : "off" );
 
 	/* Configuration  */

+ 1 - 1
arch/nios2/lib/libgcc.c

@@ -548,7 +548,7 @@ __mulsi3 (SItype a, SItype b)
   while (cnt)
     {
       if (cnt & 1)
-        {
+	{
 	  res += b;
 	}
       b <<= 1;

+ 2 - 2
arch/openrisc/cpu/cpu.c

@@ -138,8 +138,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	/* Code the jump to __reset here as the compiler is prone to
 	   emitting a bad jump instruction if the function is in flash */
 	__asm__("l.movhi r1,hi(__reset);  \
-                 l.ori r1,r1,lo(__reset); \
-                 l.jr r1");
+		 l.ori r1,r1,lo(__reset); \
+		 l.jr r1");
 	/* not reached, __reset does not return */
 	return 0;
 }

+ 5 - 5
arch/powerpc/cpu/mpc83xx/cpu_init.c

@@ -425,15 +425,15 @@ static int print_83xx_arb_event(int force)
 	};
 
 	int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT)
-	            >> AEATR_EVENT_SHIFT;
+		    >> AEATR_EVENT_SHIFT;
 	int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID)
-	              >> AEATR_MSTR_ID_SHIFT;
+		      >> AEATR_MSTR_ID_SHIFT;
 	int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST)
-	           >> AEATR_TBST_SHIFT;
+		   >> AEATR_TBST_SHIFT;
 	int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE)
-	            >> AEATR_TSIZE_SHIFT;
+		    >> AEATR_TSIZE_SHIFT;
 	int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE)
-	            >> AEATR_TTYPE_SHIFT;
+		    >> AEATR_TTYPE_SHIFT;
 
 	if (!force && !gd->arch.arbiter_event_address)
 		return 0;

+ 2 - 2
arch/powerpc/cpu/mpc83xx/pci.c

@@ -67,7 +67,7 @@ static void pci_init_bus(int bus, struct pci_region *reg)
 	pci_ctrl->pibar1 = 0;
 	pci_ctrl->piebar1 = 0;
 	pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
-	                   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
+			   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
 
 	i = hose->region_count++;
 	hose->regions[i].bus_start = 0;
@@ -79,7 +79,7 @@ static void pci_init_bus(int bus, struct pci_region *reg)
 	hose->last_busno = 0xff;
 
 	pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
-	                         CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
+				 CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
 
 	pci_register_hose(hose);
 

+ 2 - 2
arch/powerpc/cpu/ppc4xx/4xx_pci.c

@@ -143,14 +143,14 @@ void pci_405gp_init(struct pci_controller *hose)
 	ptmla_str = getenv("ptm1la");
 	ptmms_str = getenv("ptm1ms");
 	if(NULL != ptmla_str && NULL != ptmms_str ) {
-	        ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
+		ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
 		ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
 	}
 
 	ptmla_str = getenv("ptm2la");
 	ptmms_str = getenv("ptm2ms");
 	if(NULL != ptmla_str && NULL != ptmms_str ) {
-	        ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
+		ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
 		ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
 	}
 #endif

+ 1 - 1
board/Barix/ipam390/README.ipam390

@@ -50,7 +50,7 @@ TFTP from server 192.168.1.1; our IP address is 192.168.20.71
 Filename '/tftpboot/ipam390/u-boot.ais'.
 Load address: 0xc0000000
 Loading: ##################################
-         1.5 MiB/s
+	 1.5 MiB/s
 done
 Bytes transferred = 493716 (78894 hex)
 

+ 2 - 2
board/altera/common/sevenseg.c

@@ -87,10 +87,10 @@ static inline void __sevenseg_set (unsigned int value)
 
 #if (SEVENSEG_ACTIVE == 0)
 	sevenseg_portval = (sevenseg_portval &   SEVENDEG_MASK_DP)
-		         | ((~value)         & (~SEVENDEG_MASK_DP));
+			 | ((~value)         & (~SEVENDEG_MASK_DP));
 #else
 	sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
-		         | (value);
+			 | (value);
 #endif
 
 	piop->data = sevenseg_portval;

+ 26 - 26
board/boundary/nitrogen6x/6x_upgrade.txt

@@ -6,39 +6,39 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk
       if sf probe || sf probe || \
 	 sf probe 1 27000000 || sf probe 1 27000000 ; then
 	   echo "probed SPI ROM" ;
-           if sf read 0x12400000 $offset $filesize ; then
-               if cmp.b 0x12000000 0x12400000 $filesize ; then
-                   echo "------- U-Boot versions match" ;
-               else
-                   echo "Need U-Boot upgrade" ;
-                   echo "Program in 5 seconds" ;
-                   for n in 5 4 3 2 1 ; do
-                        echo $n ;
-                        sleep 1 ;
-                   done
+	   if sf read 0x12400000 $offset $filesize ; then
+	       if cmp.b 0x12000000 0x12400000 $filesize ; then
+		   echo "------- U-Boot versions match" ;
+	       else
+		   echo "Need U-Boot upgrade" ;
+		   echo "Program in 5 seconds" ;
+		   for n in 5 4 3 2 1 ; do
+			echo $n ;
+			sleep 1 ;
+		   done
 		   echo "erasing" ;
-                   sf erase 0 0x50000 ;
+		   sf erase 0 0x50000 ;
 		   # two steps to prevent bricking
 		   echo "programming" ;
-                   sf write 0x12000000 $offset $filesize ;
+		   sf write 0x12000000 $offset $filesize ;
 		   echo "verifying" ;
-                   if sf read 0x12400000 $offset $filesize ; then
-                       if cmp.b 0x12000000 0x12400000 $filesize ; then
-                           while echo "---- U-Boot upgraded. reset" ; do
+		   if sf read 0x12400000 $offset $filesize ; then
+		       if cmp.b 0x12000000 0x12400000 $filesize ; then
+			   while echo "---- U-Boot upgraded. reset" ; do
 				sleep 120
 			   done
-                       else
-                           echo "Read verification error" ;
-                       fi
-                   else
-                        echo "Error re-reading EEPROM" ;
-                   fi
-               fi
-           else
-               echo "Error reading boot loader from EEPROM" ;
-           fi
+		       else
+			   echo "Read verification error" ;
+		       fi
+		   else
+			echo "Error re-reading EEPROM" ;
+		   fi
+	       fi
+	   else
+	       echo "Error reading boot loader from EEPROM" ;
+	   fi
       else
-           echo "Error initializing EEPROM" ;
+	   echo "Error initializing EEPROM" ;
       fi ;
 else
      echo "No U-Boot image found on SD card" ;

+ 5 - 5
board/chromebook-x86/dts/alex.dts

@@ -3,8 +3,8 @@
 /include/ "coreboot.dtsi"
 
 / {
-        #address-cells = <1>;
-        #size-cells = <1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Google Alex";
 	compatible = "google,alex", "intel,atom-pineview";
 
@@ -12,13 +12,13 @@
 	       silent_console = <0>;
 	};
 
-        gpio: gpio {};
+	gpio: gpio {};
 
 	serial {
 		reg = <0x3f8 8>;
 		clock-frequency = <115200>;
 	};
 
-        chosen { };
-        memory { device_type = "memory"; reg = <0 0>; };
+	chosen { };
+	memory { device_type = "memory"; reg = <0 0>; };
 };

+ 5 - 5
board/chromebook-x86/dts/link.dts

@@ -3,8 +3,8 @@
 /include/ "coreboot.dtsi"
 
 / {
-        #address-cells = <1>;
-        #size-cells = <1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Google Link";
 	compatible = "google,link", "intel,celeron-ivybridge";
 
@@ -12,15 +12,15 @@
 	       silent_console = <0>;
 	};
 
-        gpio: gpio {};
+	gpio: gpio {};
 
 	serial {
 		reg = <0x3f8 8>;
 		clock-frequency = <115200>;
 	};
 
-        chosen { };
-        memory { device_type = "memory"; reg = <0 0>; };
+	chosen { };
+	memory { device_type = "memory"; reg = <0 0>; };
 
 	spi {
 		#address-cells = <1>;

+ 2 - 2
board/cobra5272/bdm/cobra5272_uboot.gdb

@@ -1,11 +1,11 @@
 #
 # GDB Init script for the Coldfire 5272 processor.
 #
-# The main purpose of this script is to configure the
+# The main purpose of this script is to configure the 
 # DRAM controller so code can be loaded.
 #
 # This file was changed to suite the senTec COBRA5272 board.
-#
+# 
 
 define addresses
 

+ 1 - 1
board/cogent/flash.c

@@ -487,7 +487,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 
 	if (haderr > 0) {
 		printf (" failed\n");
-	        rcode = 1;
+		rcode = 1;
 	}
 	else
 		printf (" done\n");

+ 3 - 3
board/cray/L1/bootscript.hush

@@ -47,7 +47,7 @@ else
 	echo no kernel to boot from $flash_krl, need tftp
 fi
 
-# Have a rootfs in flash?
+# Have a rootfs in flash? 
 echo test for SQUASHfs at $flash_rfs
 
 if imi $flash_rfs
@@ -69,7 +69,7 @@ fi
 
 # TFTP down a kernel
 if printenv bootfile
-then
+then 
 	tftp $tftp_addr $bootfile
 	setenv kernel $tftp_addr
 	echo I will boot the TFTP kernel
@@ -90,7 +90,7 @@ if printenv rootpath
 then
 	echo rootpath is $rootpath
 	if printenv initrd
-	then
+	then 
 		echo initrd is also specified, so use $initrd
 		tftp $tftp2_addr $initrd
 		setenv bootargs root=/dev/ram0 rw cwsroot=$serverip:$rootpath $bootargs

+ 1 - 1
board/esd/common/lcd.h

@@ -9,7 +9,7 @@
  * Neutralize little endians.
  */
 #define SWAP_LONG(data) ((unsigned long)                                  \
-		         (((unsigned long)(data) >> 24)                 | \
+			 (((unsigned long)(data) >> 24)                 | \
 			  ((unsigned long)(data)  << 24)                | \
 			  (((unsigned long)(data) >> 8) & 0x0000ff00 )  | \
 			   (((unsigned long)(data) << 8) & 0x00ff0000 )))

+ 1 - 1
board/esd/cpci750/ide.c

@@ -43,7 +43,7 @@ int ide_preinit (void)
 	if (devbusfn != -1) {
 		cpci_hd_type = 1;
 	} else {
-	        devbusfn = pci_find_device (0x1095, 0x3114, 0);
+		devbusfn = pci_find_device (0x1095, 0x3114, 0);
 		if (devbusfn != -1) {
 			cpci_hd_type = 2;
 		}

+ 1 - 1
board/esd/cpci750/pci.c

@@ -746,7 +746,7 @@ static int gt_read_config_dword (struct pci_controller *hose,
 	int bus = PCI_BUS (dev);
 
 	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-	        *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
+		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
 					   offset | (PCI_FUNC(dev) << 8),
 					   PCI_DEV (dev));
 	} else {

+ 6 - 6
board/etin/debris/flash.c

@@ -323,7 +323,7 @@ int flash_erase (flash_info_t *flash, int s_first, int s_last)
 
 	if (prot)
 		printf ("- Warning: %d protected sectors will not be erased!\n",
-					                        prot);
+								prot);
 	else
 		printf ("\n");
 
@@ -365,7 +365,7 @@ static const struct jedec_flash_info jedec_table[] = {
 		DevSize: SIZE_1MiB,
 		NumEraseRegions: 4,
 		regions: {ERASEINFO(0x10000,15),
-		          ERASEINFO(0x08000,1),
+			  ERASEINFO(0x08000,1),
 			  ERASEINFO(0x02000,2),
 			  ERASEINFO(0x04000,1)
 		}
@@ -376,7 +376,7 @@ static const struct jedec_flash_info jedec_table[] = {
 		DevSize: SIZE_2MiB,
 		NumEraseRegions: 4,
 		regions: {ERASEINFO(0x10000,31),
-		          ERASEINFO(0x08000,1),
+			  ERASEINFO(0x08000,1),
 			  ERASEINFO(0x02000,2),
 			  ERASEINFO(0x04000,1)
 		}
@@ -387,7 +387,7 @@ static const struct jedec_flash_info jedec_table[] = {
 		DevSize: SIZE_2MiB,
 		NumEraseRegions: 4,
 		regions: {ERASEINFO(0x04000,1),
-		          ERASEINFO(0x02000,2),
+			  ERASEINFO(0x02000,2),
 			  ERASEINFO(0x08000,1),
 			  ERASEINFO(0x10000,31)
 		}
@@ -398,7 +398,7 @@ static const struct jedec_flash_info jedec_table[] = {
 		DevSize: SIZE_4MiB,
 		NumEraseRegions: 2,
 		regions: {ERASEINFO(0x10000,63),
-		          ERASEINFO(0x02000,8)
+			  ERASEINFO(0x02000,8)
 		}
 
 	}, {
@@ -408,7 +408,7 @@ static const struct jedec_flash_info jedec_table[] = {
 		DevSize: SIZE_4MiB,
 		NumEraseRegions: 2,
 		regions: {ERASEINFO(0x02000,8),
-		          ERASEINFO(0x10000,63)
+			  ERASEINFO(0x10000,63)
 		}
 	}
 };

+ 7 - 7
board/evb64260/flash.c

@@ -60,7 +60,7 @@ flash_init (void)
 #define CONFIG_SYS_BOOT_FLASH_WIDTH	1
 #endif
 	size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base,
-	                         &flash_info[0]);
+				 &flash_info[0]);
 
 #ifndef CONFIG_P3G4
 	printf("[");
@@ -97,17 +97,17 @@ flash_init (void)
 #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-	              CONFIG_SYS_MONITOR_BASE,
-	              CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-	              flash_get_info(CONFIG_SYS_MONITOR_BASE));
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
 #ifdef  CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-	              CONFIG_ENV_ADDR,
-	              CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-	              flash_get_info(CONFIG_ENV_ADDR));
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
+		      flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
 	flash_size = size_b0 + size_b1;

+ 2 - 2
board/evb64260/mpsc.c

@@ -785,7 +785,7 @@ galmpsc_shutdown(int mpsc)
 
 	GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0);
 	GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF,
-	             SDMA_TX_ABORT | SDMA_RX_ABORT);
+		     SDMA_TX_ABORT | SDMA_RX_ABORT);
 
 	/* shut down the MPSC */
 	GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
@@ -797,7 +797,7 @@ galmpsc_shutdown(int mpsc)
 	/* shut down the sdma engines. */
 	/* reset config to default */
 	GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF,
-	             0x000000fc);
+		     0x000000fc);
 
 	udelay(100);
 

+ 2 - 2
board/fads/fads.c

@@ -434,7 +434,7 @@ static int _initsdram(uint base, uint noMbytes)
 	*/
 
 	memctl->memc_mcr = 0x80808111;   /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
-	                                 /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
+					 /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
 	udelay(200);
 
 	/* Run 8 refresh cycles */
@@ -567,7 +567,7 @@ static int initsdram(uint base, uint *noMbytes)
 
 	if(!_initsdram(base, m))
 	{
-	        *noMbytes += m;
+		*noMbytes += m;
 		return 0;
 	}
 	else

+ 1 - 1
board/freescale/b4860qds/tlb.c

@@ -68,7 +68,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
-                      CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
+		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 

+ 5 - 5
board/freescale/bsc9132qds/README

@@ -23,14 +23,14 @@ Overview
       ECC), up to 1333 MHz data rate
     - Dedicated security engine featuring trusted boot
     - Two DMA controllers
-         - OCNDMA with four bidirectional channels
-         - SysDMA with sixteen bidirectional channels
+	 - OCNDMA with four bidirectional channels
+	 - SysDMA with sixteen bidirectional channels
     - Interfaces
-        - Four-lane SerDes PHY
+	- Four-lane SerDes PHY
 	    - PCI Express controller complies with the PEX Specification-Rev 2.0
-        - Two Common Public Radio Interface (CPRI) controller lanes
+	- Two Common Public Radio Interface (CPRI) controller lanes
 	    - High-speed USB 2.0 host and device controller with ULPI interface
-        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
+	- Enhanced secure digital (SD/MMC) host controller (eSDHC)
 	    - Antenna interface controller (AIC), supporting four industry
 		standard JESD207/four custom ADI RF interfaces
        - ADI lanes support both full duplex FDD support & half duplex TDD

+ 2 - 2
board/freescale/mpc8313erdb/mpc8313erdb.c

@@ -129,12 +129,12 @@ void board_init_f(ulong bootflag)
 {
 	board_early_init_f();
 	NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
-	             CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+		     CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
 	puts("NAND boot... ");
 	init_timebase();
 	initdram(0);
 	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd,
-	              CONFIG_SYS_NAND_U_BOOT_RELOC);
+		      CONFIG_SYS_NAND_U_BOOT_RELOC);
 }
 
 void board_init_r(gd_t *gd, ulong dest_addr)

+ 2 - 2
board/freescale/mpc8360emds/mpc8360emds.c

@@ -427,7 +427,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 			if (prop) {
 				path = fdt_path_offset(blob, prop);
 				prop = fdt_getprop(blob, path,
-				                   "phy-connection-type", 0);
+						   "phy-connection-type", 0);
 				if (prop && (strcmp(prop, "rgmii-id") == 0))
 					fdt_fixup_phy_connection(blob, path,
 						PHY_INTERFACE_MODE_RGMII_RXID);
@@ -439,7 +439,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 			if (prop) {
 				path = fdt_path_offset(blob, prop);
 				prop = fdt_getprop(blob, path,
-				                   "phy-connection-type", 0);
+						   "phy-connection-type", 0);
 				if (prop && (strcmp(prop, "rgmii-id") == 0))
 					fdt_fixup_phy_connection(blob, path,
 						PHY_INTERFACE_MODE_RGMII_RXID);

+ 3 - 3
board/funkwerk/vovpn-gw/vovpn-gw.c

@@ -270,9 +270,9 @@ int misc_init_r (void)
 	for (i = 0; i < 64; i++) {
 		c = *dummy;
 		printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i,
-		        memctl->memc_mamr,
-		        memctl->memc_mar,
-		        memctl->memc_mdr );
+			memctl->memc_mamr,
+			memctl->memc_mar,
+			memctl->memc_mdr );
 	}
 	memctl->memc_mamr = 0x00044440;
 #endif

+ 1 - 1
board/gen860t/flash.c

@@ -182,7 +182,7 @@ flash_get_offsets (ulong base, flash_info_t *info)
 
 		default:
 			printf ("Don't know sector offsets for FLASH"
-			        " type 0x%lx\n", info->flash_id);
+				" type 0x%lx\n", info->flash_id);
 	    return;
 	}
 }

+ 2 - 2
board/incaip/incaip.c

@@ -58,9 +58,9 @@ phys_size_t initdram(int board_type)
 		for (rows = 0xB; rows <= 0xD; rows++)
 		{
 			*INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
-			                           (rows << 4) | cols;
+						   (rows << 4) | cols;
 			size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-			                                     max_sdram_size());
+							     max_sdram_size());
 
 			if (size > max_size)
 			{

+ 1 - 1
board/matrix_vision/mvbc_p/Makefile

@@ -19,7 +19,7 @@ OBJS    := $(addprefix $(obj),$(COBJS))
 SOBJS   := $(addprefix $(obj),$(SOBJS))
 
 $(LIB): $(obj).depend $(OBJS)
-	        $(call cmd_link_o_target, $(OBJS))
+		$(call cmd_link_o_target, $(OBJS))
 
 #########################################################################
 

+ 1 - 1
board/matrix_vision/mvsmr/Makefile

@@ -19,7 +19,7 @@ OBJS    := $(addprefix $(obj),$(COBJS))
 SOBJS   := $(addprefix $(obj),$(SOBJS))
 
 $(LIB): $(obj).depend $(OBJS)
-	        $(call cmd_link_o_target, $(OBJS))
+		$(call cmd_link_o_target, $(OBJS))
 	@mkimage -T script -C none -n mvSMR_Script -d bootscript $(obj)bootscript.img
 
 #########################################################################

+ 61 - 61
board/openrisc/openrisc-generic/or1ksim.cfg

@@ -20,8 +20,8 @@ the simulator.
    not found too, it reverts to the built-in default configuration.
 
    NOTE: Users should not rely on the built-in configuration, since the
-         default configuration may differ between version.
-         Rather create a configuration file that sets all critical values.
+	 default configuration may differ between version.
+	 Rather create a configuration file that sets all critical values.
 
    This file may contain (standard C) comments only - no // support.
 
@@ -306,7 +306,7 @@ end
   debug = 0-9
       0  : no debug messages
       1-9: debug message level.
-           higher numbers produce more messages
+	   higher numbers produce more messages
 
   profile = 0/1
       '0': don't generate profiling file 'sim.profile'
@@ -375,11 +375,11 @@ end
     Core Verification.
 
     enabled = 0/1
-        '0': disbable VAPI server
-        '1': enable/start VAPI server
+	'0': disbable VAPI server
+	'1': enable/start VAPI server
 
     server_port = <value>
-        TCP/IP port to start VAPI server on
+	TCP/IP port to start VAPI server on
 
     log_enabled = 0/1
        '0': disable VAPI requests logging
@@ -565,56 +565,56 @@ end
    This section configures the UARTs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first UART register for this device
+	address of first UART register for this device
 
 
      channel = <channeltype>:<args>
 
-        The channel parameter indicates the source of received UART characters
-        and the sink for transmitted UART characters.
+	The channel parameter indicates the source of received UART characters
+	and the sink for transmitted UART characters.
 
-        The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
-        (without quotes).
+	The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
+	(without quotes).
 
-          A) To send/receive characters from a pair of files, use a file
-             channel:
+	  A) To send/receive characters from a pair of files, use a file
+	     channel:
 
-               channel=file:<rxfile>,<txfile>
+	       channel=file:<rxfile>,<txfile>
 
 	  B) To create an interactive terminal window, use an xterm channel:
 
-               channel=xterm:[<xterm_arg>]*
+	       channel=xterm:[<xterm_arg>]*
 
 	  C) To create a bidirectional tcp socket which one could, for example,
-             access via telnet, use a tcp channel:
+	     access via telnet, use a tcp channel:
 
-               channel=tcp:<port number>
+	       channel=tcp:<port number>
 
 	  D) To cause the UART to read/write from existing numeric file
-             descriptors, use an fd channel:
+	     descriptors, use an fd channel:
 
-               channel=fd:<rx file descriptor num>,<tx file descriptor num>
+	       channel=fd:<rx file descriptor num>,<tx file descriptor num>
 
-          E) To connect the UART to a physical serial port, create a tty
-             channel:
+	  E) To connect the UART to a physical serial port, create a tty
+	     channel:
 
 	       channel=tty:device=/dev/ttyS0,baud=9600
 
      irq = <value>
-        irq number for this device
+	irq number for this device
 
      16550 = 0/1
-        '0': this device is a UART16450
-        '1': this device is a UART16550
+	'0': this device is a UART16450
+	'1': this device is a UART16550
 
      jitter = <value>
-        in msecs... time to block, -1 to disable it
+	in msecs... time to block, -1 to disable it
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+	VAPI id of this instance
 */
 
 section uart
@@ -634,16 +634,16 @@ end
    This section configures the DMAs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first DMA register for this device
+	address of first DMA register for this device
 
      irq = <value>
-        irq number for this device
+	irq number for this device
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+	VAPI id of this instance
 */
 
 section dma
@@ -658,37 +658,37 @@ end
    This section configures the ETHERNETs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first ethernet register for this device
+	address of first ethernet register for this device
 
      dma = <value>
-        which controller is this ethernet "connected" to
+	which controller is this ethernet "connected" to
 
      irq = <value>
-        ethernet mac IRQ level
+	ethernet mac IRQ level
 
      rtx_type = <value>
-        use 0 - file interface, 1 - socket interface
+	use 0 - file interface, 1 - socket interface
 
      rx_channel = <value>
-        DMA channel used for RX
+	DMA channel used for RX
 
      tx_channel = <value>
-        DMA channel used for TX
+	DMA channel used for TX
 
      rxfile = "<filename>"
-        filename, where to read data from
+	filename, where to read data from
 
      txfile = "<filename>"
-        filename, where to write data to
+	filename, where to write data to
 
      sockif = "<ifacename>"
-        interface name of ethernet socket
+	interface name of ethernet socket
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+	VAPI id of this instance
 */
 
 section ethernet
@@ -711,16 +711,16 @@ end
    This section configures the GPIOs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first GPIO register for this device
+	address of first GPIO register for this device
 
      irq = <value>
-        irq number for this device
+	irq number for this device
 
      base_vapi_id = <hex_value>
-        first VAPI id of this instance
+	first VAPI id of this instance
 	GPIO uses 8 consecutive VAPI IDs
 */
 
@@ -736,19 +736,19 @@ end
     This section configures the VGA/LCD controller
 
       enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
       baseaddr = <hex_value>
-        address of first VGA register
+	address of first VGA register
 
       irq = <value>
-        irq number for this device
+	irq number for this device
 
       refresh_rate = <value>
-        number of cycles between screen dumps
+	number of cycles between screen dumps
 
       filename = "<filename>"
-        template name for generated names (e.g. "primary" produces "primary0023.bmp")
+	template name for generated names (e.g. "primary" produces "primary0023.bmp")
 */
 
 section vga
@@ -825,39 +825,39 @@ end
     This section configures the ATA/ATAPI host controller
 
       baseaddr = <hex_value>
-        address of first ATA register
+	address of first ATA register
 
       enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+	Enable/disable the peripheral.  By default if it is enabled.
 
       irq = <value>
-        irq number for this device
+	irq number for this device
 
       debug = <value>
-        debug level for ata models.
+	debug level for ata models.
 	0: no debug messages
 	1: verbose messages
 	3: normal messages (more messages than verbose)
-        5: debug messages (normal debug messages)
+	5: debug messages (normal debug messages)
 	7: flow control messages (debug statemachine flows)
 	9: low priority message (display everything the code does)
 
       dev_type0/1 = <value>
-        ata device 0 type
-        0: NO_CONNeCT: none (not connected)
+	ata device 0 type
+	0: NO_CONNeCT: none (not connected)
 	1: FILE      : simulated harddisk
 	2: LOCAL     : local system harddisk
 
       dev_file0/1 = "<filename>"
-        filename for simulated ATA device
+	filename for simulated ATA device
 	valid only if dev_type0 == 1
 
       dev_size0/1 = <value>
-        size of simulated hard-disk (in MBytes)
+	size of simulated hard-disk (in MBytes)
 	valid only if dev_type0 == 1
 
       dev_packet0/1 = <value>
-        0: simulated ATA device does NOT implement PACKET command feature set
+	0: simulated ATA device does NOT implement PACKET command feature set
 	1: simulated ATA device does implement PACKET command feature set
 
    FIXME: irq number

+ 1 - 1
board/ppmc8260/strataflash.c

@@ -407,7 +407,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout
 			printf("Command Sequence Error.\n");
 		} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
 			printf("Block Erase Error.\n");
-		        retcode = ERR_NOT_ERASED;
+			retcode = ERR_NOT_ERASED;
 		} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
 			printf("Locking Error\n");
 		}

+ 3 - 3
board/pxa255_idp/pxa_reg_calcs.py

@@ -21,7 +21,7 @@ class gpio:
 		self.clr = clr
 		self.alt = alt
 		self.desc = desc
-
+		
 
 # the following is a dictionary of all GPIOs in the system
 # the key is the GPIO number
@@ -280,8 +280,8 @@ for reg in registers:
 
 # print define to past right into U-Boot source code
 
-print
-print
+print 
+print 
 
 for reg in registers:
 	print '#define %s	0x%x' % (uboot_reg_names[reg], pxa_regs[reg])

+ 1 - 1
board/rbc823/rbc823.c

@@ -78,7 +78,7 @@ const uint static_table[] =
 	0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04,
 	0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04,
 	0xFFFFFC04, 0xFFFFFC05, /* last */
-	                        _NOT_USED_, _NOT_USED_,
+				_NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,

+ 3 - 3
board/samsung/dts/exynos5250-snow.dts

@@ -71,9 +71,9 @@
 		codec-enable-gpio = <&gpio 0xb7 0>;
 	};
 
-        sound@12d60000 {
-                status = "disabled";
-        };
+	sound@12d60000 {
+		status = "disabled";
+	};
 
 	i2c@12cd0000 {
 		soundcodec@22 {

+ 1 - 1
board/svm_sc8xx/svm_sc8xx.c

@@ -139,6 +139,6 @@ phys_size_t initdram (int board_type)
 #if defined(CONFIG_CMD_DOC)
 void doc_init (void)
 {
-	        doc_probe (CONFIG_SYS_DOC_BASE);
+		doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif

+ 1 - 1
boards.cfg

@@ -196,7 +196,7 @@ Active  arm         arm926ejs      mb86r0x     syteco          jadecpu
 Active  arm         arm926ejs      mx25        freescale       mx25pdk             mx25pdk                              mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg                                                                           Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         arm926ejs      mx25        karo            tx25                tx25                                 -                                                                                                                                 John Rigby <jcrigby@gmail.com>
 Active  arm         arm926ejs      mx25        syteco          zmx25               zmx25                                -                                                                                                                                 Matthias Weisser <weisserm@arcor.de>
-Active  arm         arm926ejs      mx27        armadeus        apf27               apf27                                -                                                                                                                                 Philippe Reynes <tremyfr@yahoo.fr>:Eric Jarrige <eric.jarrige@armadeus.org>
+Active  arm         arm926ejs      mx27        armadeus        apf27               apf27                                -                                                                                                                                 Philippe Reynes <tremyfr@yahoo.fr>:Eric Jarrige <eric.jarrige@armadeus.org> 
 Active  arm         arm926ejs      mx27        logicpd         imx27lite           imx27lite                            -                                                                                                                                 Wolfgang Denk <wd@denx.de>
 Active  arm         arm926ejs      mx27        logicpd         imx27lite           magnesium                            -                                                                                                                                 Heiko Schocher <hs@denx.de>
 Active  arm         arm926ejs      mxs         bluegiga        apx4devkit          apx4devkit                           apx4devkit                                                                                                                        Lauri Hintsala <lauri.hintsala@bluegiga.com>

+ 3 - 3
common/cmd_bmp.c

@@ -121,9 +121,9 @@ static int do_bmp_display(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar
 		break;
 	case 4:
 		addr = simple_strtoul(argv[1], NULL, 16);
-	        x = simple_strtoul(argv[2], NULL, 10);
-	        y = simple_strtoul(argv[3], NULL, 10);
-	        break;
+		x = simple_strtoul(argv[2], NULL, 10);
+		y = simple_strtoul(argv[3], NULL, 10);
+		break;
 	default:
 		return CMD_RET_USAGE;
 	}

+ 1 - 1
common/main.c

@@ -365,7 +365,7 @@ static void process_boot_delay(void)
 #ifdef CONFIG_BOOTCOUNT_LIMIT
 	if (bootlimit && (bootcount > bootlimit)) {
 		printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n",
-		        (unsigned)bootlimit);
+			(unsigned)bootlimit);
 		s = getenv ("altbootcmd");
 	}
 	else

+ 1 - 1
config.mk

@@ -320,7 +320,7 @@ endif
 
 # Linus' kernel sanity checking tool
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-                  -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
+		  -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
 
 # Location of a usable BFD library, where we define "usable" as
 # "built for ${HOST}, supports ${TARGET}".  Sensible values are

+ 2 - 2
doc/DocBook/Makefile

@@ -134,7 +134,7 @@ build_main_index = rm -rf $(main_idx); \
 quiet_cmd_db2html = HTML    $@
       cmd_db2html = xmlto html $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
 		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
-        $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
+	$(patsubst %.html,%,$(notdir $@))</a><p>' > $@
 
 %.html:	%.xml
 	@(which xmlto > /dev/null 2>&1) || \
@@ -143,7 +143,7 @@ quiet_cmd_db2html = HTML    $@
 	@rm -rf $@ $(patsubst %.html,%,$@)
 	$(call cmd_db2html)
 	@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
-            cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
+	    cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
 
 quiet_cmd_db2man = MAN     $@
       cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi

+ 17 - 17
doc/README.ext4

@@ -28,30 +28,30 @@ Steps to test:
 
 1. After applying the patch, ext4 specific commands can be seen
    in the boot loader prompt using
-        UBOOT #help
+	UBOOT #help
 
-        ext4load- load binary file from a Ext4 file system
-        ext4ls  - list files in a directory (default /)
-        ext4write- create a file in ext4 formatted partition
+	ext4load- load binary file from a Ext4 file system
+	ext4ls  - list files in a directory (default /)
+	ext4write- create a file in ext4 formatted partition
 
 2. To list the files in ext4 formatted partition, execute
-        ext4ls <interface> <dev[:part]> [directory]
-        For example:
-        UBOOT #ext4ls mmc 0:5 /usr/lib
+	ext4ls <interface> <dev[:part]> [directory]
+	For example:
+	UBOOT #ext4ls mmc 0:5 /usr/lib
 
 3. To read and load a file from an ext4 formatted partition to RAM, execute
-        ext4load <interface> <dev[:part]> [addr] [filename] [bytes]
-        For example:
-        UBOOT #ext4load mmc 2:2 0x30007fc0 uImage
+	ext4load <interface> <dev[:part]> [addr] [filename] [bytes]
+	For example:
+	UBOOT #ext4load mmc 2:2 0x30007fc0 uImage
 
 4. To write a file to a ext4 formatted partition.
-        a) First load a file to RAM at a particular address for example 0x30007fc0.
-        Now execute ext4write command
-        ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes]
-        For example:
-        UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120
-        (here 6183120 is the size of the file to be written)
-        Note: Absolute path is required for the file to be written
+	a) First load a file to RAM at a particular address for example 0x30007fc0.
+	Now execute ext4write command
+	ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes]
+	For example:
+	UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120
+	(here 6183120 is the size of the file to be written)
+	Note: Absolute path is required for the file to be written
 
 References :
 	-- ext4 implementation in Linux Kernel

+ 3 - 3
doc/README.kwbimage

@@ -40,9 +40,9 @@ Board specific configuration file specifications:
 ------------------------------------------------
 1. This file must present in the $(BOARDDIR).  The default name is
 	kwbimage.cfg.  The name can be set as part of the full path
-        to the file using CONFIG_SYS_KWD_CONFIG (probably in
-        include/configs/<yourboard>.h).   The path should look like:
-        $(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg
+	to the file using CONFIG_SYS_KWD_CONFIG (probably in
+	include/configs/<yourboard>.h).   The path should look like:
+	$(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg
 2. This file can have empty lines and lines starting with "#" as first
 	character to put comments
 3. This file can have configuration command lines as mentioned below,

+ 1 - 1
doc/README.mxc_hab

@@ -20,7 +20,7 @@ Data Size:    327680 Bytes = 320.00 kB = 0.31 MB
 Load Address: 177ff420
 Entry Point:  17800000
 HAB Blocks:   177ff400 00000000 0004dc00
-              ^^^^^^^^ ^^^^^^^^ ^^^^^^^^
+	      ^^^^^^^^ ^^^^^^^^ ^^^^^^^^
 		|	|	   |
 		|	|	   -------- (1)
 		|	|

+ 12 - 12
doc/README.mxsimage

@@ -10,7 +10,7 @@ The mxsimage tool is targeted to be a simple replacement for the elftosb2 .
 To generate an image, write an image configuration file and run:
 
  mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \
-         <output bootstream file>
+	 <output bootstream file>
 
 The output bootstream file is usually using the .sb file extension. Note
 that the example configuration files for producing bootable BootStream with
@@ -54,33 +54,33 @@ These semantics and rules will be outlined now.
 
       LOAD     u32_address string_filename
       - Instructs the BootROM to load file pointed by "string_filename" onto
-        address "u32_address".
+	address "u32_address".
 
       LOAD IVT u32_address u32_IVT_entry_point
       - Crafts and loads IVT onto address "u32_address" with the entry point
-        of u32_IVT_entry_point.
+	of u32_IVT_entry_point.
       - i.MX28-specific instruction!
 
       LOAD DCD u32_address u32_DCD_block_ID
       - Loads the DCD block with ID "u32_DCD_block_ID" onto address
-        "u32_address" and executes the contents of this DCD block
+	"u32_address" and executes the contents of this DCD block
       - i.MX28-specific instruction!
 
       FILL u32_address u32_pattern u32_length
       - Starts to write memory from addres "u32_address" with a pattern
-        specified by "u32_pattern". Writes exactly "u32_length" bytes of the
+	specified by "u32_pattern". Writes exactly "u32_length" bytes of the
 	pattern.
 
       JUMP [HAB] u32_address [u32_r0_arg]
       - Jumps onto memory address specified by "u32_address" by setting this
-        address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
+	address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
 	register "r0" to the executed code if this option is specified.
 	Otherwise, ARM register "r0" will default to value 0x00000000. The
 	optional "HAB" flag is i.MX28-specific flag turning on the HAB boot.
 
       CALL [HAB] u32_address [u32_r0_arg]
       - See JUMP instruction above, as the operation is exactly the same with
-        one difference. The CALL instruction does allow returning into the
+	one difference. The CALL instruction does allow returning into the
 	BootROM from the executed code. U-Boot makes use of this in it's SPL
 	code.
 
@@ -88,10 +88,10 @@ These semantics and rules will be outlined now.
       - Restart the CPU and start booting from device specified by the
 	"string_mode" argument. The "string_mode" differs for each CPU
 	and can be:
-         i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
-                               JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
-         i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
-                               JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
+	 i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
+			       JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
+	 i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
+			       JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
 
   - An optional "DCD" blocks can be added at the begining of the configuration
     file. Note that the DCD is only supported on i.MX28.
@@ -99,7 +99,7 @@ These semantics and rules will be outlined now.
       configuration file.
     - The DCD block has the following semantics:
 
-        DCD u32_DCD_block_ID
+	DCD u32_DCD_block_ID
 	- u32_DCD_block_ID	:: The ID number of the DCD block, must match
 				   the ID number used by "LOAD DCD" instruction.
 

+ 1 - 1
doc/README.nokia_rx51

@@ -62,7 +62,7 @@ Available additional commands/variables:
  * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile}
  * run trymmckernboot - Try to load and boot kernel image ${mmckernfile}
  * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile}
-                              with initrd image ${mmcinitrdfile}
+			      with initrd image ${mmcinitrdfile}
 
 Additional variables for loading files from mmc:
 

+ 5 - 5
doc/README.ramboot-ppc85xx

@@ -23,11 +23,11 @@ methods could be handy.
    the board.And then execute the bootloader from DDR.
    Some usecases where this may be used:
       - While developing some new feature of u-boot, for example USB driver or
-        SPI driver.
-        Suppose the board already has a working bootloader on it. And you would
-        prefer to keep it intact, at the same time want to test your bootloader.
-        In this case you can get your test bootloader binary into DDR via tftp
-        for example. Then execute the test bootloader.
+	SPI driver.
+	Suppose the board already has a working bootloader on it. And you would
+	prefer to keep it intact, at the same time want to test your bootloader.
+	In this case you can get your test bootloader binary into DDR via tftp
+	for example. Then execute the test bootloader.
      - Suppose a platform already has a propreitery bootloader which does not
        support for example AMP boot. In this case also RAM boot loader can be
        utilized.

+ 12 - 12
doc/README.trace

@@ -63,20 +63,20 @@ In:    serial
 Out:   serial
 Err:   serial
 =>trace stats
-        671,406 function sites
-         69,712 function calls
-              0 untracked function calls
-         73,373 traced function calls
-             16 maximum observed call depth
-             15 call depth limit
-         66,491 calls not traced due to depth
+	671,406 function sites
+	 69,712 function calls
+	      0 untracked function calls
+	 73,373 traced function calls
+	     16 maximum observed call depth
+	     15 call depth limit
+	 66,491 calls not traced due to depth
 =>trace stats
-        671,406 function sites
+	671,406 function sites
       1,279,450 function calls
-              0 untracked function calls
-        950,490 traced function calls (333217 dropped due to overflow)
-             16 maximum observed call depth
-             15 call depth limit
+	      0 untracked function calls
+	950,490 traced function calls (333217 dropped due to overflow)
+	     16 maximum observed call depth
+	     15 call depth limit
       1,275,767 calls not traced due to depth
 =>trace calls 0 e00000
 Call list dumped to 00000000, size 0xae0a40

+ 2 - 2
doc/README.ubi

@@ -188,8 +188,8 @@ ubifsls [directory]
 For example:
 
 => ubifsls
-            17442  Thu Jan 01 02:57:38 1970  imx28-evk.dtb
-          2998146  Thu Jan 01 02:57:43 1970  zImage
+	    17442  Thu Jan 01 02:57:38 1970  imx28-evk.dtb
+	  2998146  Thu Jan 01 02:57:43 1970  zImage
 
 
 And the ubifsload command allows you to load a file from a UBI

+ 9 - 9
doc/README.zfs

@@ -7,20 +7,20 @@ Steps to test:
 
 1. After applying the patch, zfs specific commands can be seen
    in the boot loader prompt using
-        UBOOT #help
+	UBOOT #help
 
-        zfsload- load binary file from a ZFS file system
-        zfsls  - list files in a directory (default /)
+	zfsload- load binary file from a ZFS file system
+	zfsls  - list files in a directory (default /)
 
 2. To list the files in zfs pool, device or partition, execute
-        zfsls <interface> <dev[:part]> [POOL/@/dir/file]
-        For example:
-        UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/
+	zfsls <interface> <dev[:part]> [POOL/@/dir/file]
+	For example:
+	UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/
 
 3. To read and load a file from an ZFS formatted partition to RAM, execute
-        zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
-        For example:
-        UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage
+	zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
+	For example:
+	UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage
 
 References :
 	-- ZFS GRUB sources from Solaris GRUB-0.97

+ 12 - 12
doc/driver-model/UDM-cores.txt

@@ -94,12 +94,12 @@ Pavel Herrmann <morpheus.ibis@gmail.com>
     driver_activate(instance *inst);
       This call will recursively activate all devices necessary for using the
       specified device. the code could be simplified as:
-        {
-        if (is_activated(inst))
-          return;
-        driver_activate(inst->bus);
-        get_driver(inst)->probe(inst);
-        }
+	{
+	if (is_activated(inst))
+	  return;
+	driver_activate(inst->bus);
+	get_driver(inst)->probe(inst);
+	}
 
       The case with multiple parents will need to be handled here as well.
       get_driver is an accessor to available drivers, which will get struct
@@ -107,12 +107,12 @@ Pavel Herrmann <morpheus.ibis@gmail.com>
 
     i2c_write(instance *inst, ...);
       An actual call to some method of the driver. This code will look like:
-        {
-        driver_activate(inst);
-        struct instance *core = get_core_instance(CORE_I2C);
-        device_ops = get_ops(inst);
-        device_ops->write(...);
-        }
+	{
+	driver_activate(inst);
+	struct instance *core = get_core_instance(CORE_I2C);
+	device_ops = get_ops(inst);
+	device_ops->write(...);
+	}
 
       get_ops will not be an exported function, it will be internal and specific
       to the core, as it needs to know how are the ops stored, and what type

+ 6 - 6
doc/driver-model/UDM-design.txt

@@ -87,7 +87,7 @@ III) The drivers
   of the cores.
 
   FIXME: Should *cores[] be really struct driver, pointing to drivers that
-         represent the cores? Shouldn't it be core instance pointer?
+	 represent the cores? Shouldn't it be core instance pointer?
 
   2) Instantiation of a driver
   ----------------------------
@@ -101,7 +101,7 @@ III) The drivers
   functions.
 
   FIXME: We need some functions that will return list of busses of certain type
-         registered with the system so the user can find proper instance even if
+	 registered with the system so the user can find proper instance even if
 	 he has no bus pointer (this will come handy if the user isn't
 	 registering the driver from board init function, but somewhere else).
 
@@ -183,12 +183,12 @@ III) The drivers
   int driver_bind(struct instance *in)
   {
 	...
-        core_bind(&core_i2c_static_instance, in, i2c_bus_funcs);
-        ...
+	core_bind(&core_i2c_static_instance, in, i2c_bus_funcs);
+	...
   }
 
   FIXME: What if we need to run-time determine, depending on some hardware
-         register, what kind of i2c_bus_funcs to pass?
+	 register, what kind of i2c_bus_funcs to pass?
 
   This makes the i2c core aware of a new bus. The i2c_bus_funcs is a constant
   structure of functions any i2c bus driver must provide to work. This will
@@ -196,7 +196,7 @@ III) The drivers
   the pointer to the instance of a core this driver provides function to.
 
   FIXME: Maybe replace "core-i2c" with CORE_I2C global pointer to an instance of
-         the core?
+	 the core?
 
   4) The instantiation of a core driver
   -------------------------------------

+ 2 - 2
doc/driver-model/UDM-gpio.txt

@@ -56,11 +56,11 @@ II) Approach
 
   struct gpio_driver_ops {
     int  (*gpio_request)(struct instance *i, unsigned gpio,
-                         const char *label);
+			 const char *label);
     int  (*gpio_free)(struct instance *i, unsigned gpio);
     int  (*gpio_direction_input)(struct instance *i, unsigned gpio);
     int  (*gpio_direction_output)(struct instance *i, unsigned gpio,
-                                  int value);
+				  int value);
     int  (*gpio_get_value)(struct instance *i, unsigned gpio);
     void (*gpio_set_value)(struct instance *i, unsigned gpio, int value);
   }

+ 5 - 5
doc/driver-model/UDM-hwmon.txt

@@ -36,15 +36,15 @@ II) Approach
   In the UDM each hwmon driver would register itself by a function
 
     int hwmon_device_register(struct instance *i,
-                              struct hwmon_device_ops *o);
+			      struct hwmon_device_ops *o);
 
   The structure being defined as follows:
 
     struct hwmon_device_ops {
-        int  (*read)(struct instance *i, int sensor, int reg);
-        int  (*write)(struct instance *i, int sensor, int reg,
-                      int val);
-        int  (*get_temp)(struct instance *i, int sensor);
+	int  (*read)(struct instance *i, int sensor, int reg);
+	int  (*write)(struct instance *i, int sensor, int reg,
+		      int val);
+	int  (*get_temp)(struct instance *i, int sensor);
     };
 
 

+ 3 - 3
doc/driver-model/UDM-mmc.txt

@@ -107,7 +107,7 @@ struct mmc {
 
   /* DRIVER: Function used to submit command to the card */
   int (*send_cmd)(struct mmc *mmc,
-                  struct mmc_cmd *cmd, struct mmc_data *data);
+		  struct mmc_cmd *cmd, struct mmc_data *data);
 
   /* DRIVER: Function used to configure the host */
   void (*set_ios)(struct mmc *mmc);
@@ -139,7 +139,7 @@ provided by the MMC driver:
 struct mmc_driver_ops {
   /* Function used to submit command to the card */
   int  (*send_cmd)(struct mmc *mmc,
-                  struct mmc_cmd *cmd, struct mmc_data *data);
+		  struct mmc_cmd *cmd, struct mmc_data *data);
   /* DRIVER: Function used to configure the host */
   void (*set_ios)(struct mmc *mmc);
   /* Function used to initialize the host */
@@ -206,7 +206,7 @@ struct mmc_card_props {
 The probe() function will then register the MMC driver by calling:
 
   mmc_device_register(struct instance *i, struct mmc_driver_ops *o,
-                                          struct mmc_driver_params *p);
+					  struct mmc_driver_params *p);
 
 The struct mmc_driver_params will have to be dynamic in some cases, but the
 driver shouldn't modify it's contents elsewhere than in probe() call.

+ 6 - 6
doc/driver-model/UDM-power.txt

@@ -57,20 +57,20 @@ III) Analysis of in-tree drivers
   All methods of this file are moved to another location.
     void ftpmu010_32768osc_enable(void): Move to boards hacks
     void ftpmu010_mfpsr_select_dev(unsigned int dev): Move to board file
-                                                      arch/nds32/lib/board.c
+						      arch/nds32/lib/board.c
     void ftpmu010_mfpsr_diselect_dev(unsigned int dev): Dead code
     void ftpmu010_dlldis_disable(void): Dead code
     void ftpmu010_sdram_clk_disable(unsigned int cr0): Move to board file
-                                                       arch/nds32/lib/board.c
+						       arch/nds32/lib/board.c
     void ftpmu010_sdramhtc_set(unsigned int val): Move to board file
-                                                  arch/nds32/lib/board.c
+						  arch/nds32/lib/board.c
 
   2) twl4030.c
   ------------
   All methods of this file are moved to another location.
     void twl4030_power_reset_init(void): Move to board hacks
     void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, u8 dev_grp,
-                                 u8 dev_grp_sel): Move to board hacks
+				 u8 dev_grp_sel): Move to board hacks
     void twl4030_power_init(void): Move to board hacks
     void twl4030_power_mmc_init(void): Move to board hacks
 
@@ -83,6 +83,6 @@ III) Analysis of in-tree drivers
     int twl6030_get_battery_voltage(void): Convert to new API
     void twl6030_init_battery_charging(void): Convert to new API
     void twl6030_power_mmc_init(): Move to board file
-                                   drivers/mmc/omap_hsmmc.c
+				   drivers/mmc/omap_hsmmc.c
     void twl6030_usb_device_settings(): Move to board file
-                                        drivers/usb/musb/omap3.c
+					drivers/usb/musb/omap3.c

+ 13 - 13
doc/driver-model/UDM-rtc.txt

@@ -12,15 +12,15 @@ U-Boot currently implements one common API for RTC devices. The interface
 is defined in include/rtc.h and comprises of functions and structures:
 
     struct rtc_time {
-        int tm_sec;
-        int tm_min;
-        int tm_hour;
-        int tm_mday;
-        int tm_mon;
-        int tm_year;
-        int tm_wday;
-        int tm_yday;
-        int tm_isdst;
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
     };
 
     int rtc_get (struct rtc_time *);
@@ -42,14 +42,14 @@ II) Approach
   In the UDM each rtc driver would register itself by a function
 
     int rtc_device_register(struct instance *i,
-                            struct rtc_device_ops *o);
+			    struct rtc_device_ops *o);
 
   The structure being defined as follows:
 
     struct rtc_device_ops {
-        int  (*get_time)(struct instance *i, struct rtc_time *t);
-        int  (*set_time)(struct instance *i, struct rtc_time *t);
-        int  (*reset)(struct instance *i);
+	int  (*get_time)(struct instance *i, struct rtc_time *t);
+	int  (*set_time)(struct instance *i, struct rtc_time *t);
+	int  (*reset)(struct instance *i);
     };
 
 

+ 6 - 6
doc/driver-model/UDM-spi.txt

@@ -15,12 +15,12 @@ I) Overview
 
   void spi_init(void);
   struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-                                    unsigned int max_hz, unsigned int mode);
+				    unsigned int max_hz, unsigned int mode);
   void spi_free_slave(struct spi_slave *slave);
   int  spi_claim_bus(struct spi_slave *slave);
   void spi_release_bus(struct spi_slave *slave);
   int  spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-                const void *dout, void *din, unsigned long flags);
+		const void *dout, void *din, unsigned long flags);
   int  spi_cs_is_valid(unsigned int bus, unsigned int cs);
   void spi_cs_activate(struct spi_slave *slave);
   void spi_cs_deactivate(struct spi_slave *slave);
@@ -69,13 +69,13 @@ II) Approach
 
   struct ops {
     int  (*spi_request_bus)(struct instance *i, unsigned int bus,
-                            unsigned int cs, unsigned int max_hz,
-                            unsigned int mode);
+			    unsigned int cs, unsigned int max_hz,
+			    unsigned int mode);
     void (*spi_release_bus)(struct instance *i);
     int  (*spi_xfer) (struct instance *i, unsigned int bitlen,
-                      const void *dout, void *din, unsigned long flags);
+		      const void *dout, void *din, unsigned long flags);
     int  (*spi_cs_is_valid)(struct instance *i, unsigned int bus,
-                            unsigned int cs);
+			    unsigned int cs);
     void (*spi_cs_activate)(struct instance *i);
     void (*spi_cs_deactivate)(struct instance *i);
     void (*spi_set_speed)(struct instance *i, uint hz);

+ 14 - 14
doc/driver-model/UDM-stdio.txt

@@ -17,29 +17,29 @@ Each device that wants to register with STDIO subsystem has to define struct
 stdio_dev, defined in include/stdio_dev.h and containing the following fields:
 
 struct stdio_dev {
-        int     flags;                  /* Device flags: input/output/system */
-        int     ext;                    /* Supported extensions              */
-        char    name[16];               /* Device name                       */
+	int     flags;                  /* Device flags: input/output/system */
+	int     ext;                    /* Supported extensions              */
+	char    name[16];               /* Device name                       */
 
 /* GENERAL functions */
 
-        int (*start) (void);            /* To start the device               */
-        int (*stop) (void);             /* To stop the device                */
+	int (*start) (void);            /* To start the device               */
+	int (*stop) (void);             /* To stop the device                */
 
 /* OUTPUT functions */
 
-        void (*putc) (const char c);    /* To put a char                     */
-        void (*puts) (const char *s);   /* To put a string (accelerator)     */
+	void (*putc) (const char c);    /* To put a char                     */
+	void (*puts) (const char *s);   /* To put a string (accelerator)     */
 
 /* INPUT functions */
 
-        int (*tstc) (void);             /* To test if a char is ready...     */
-        int (*getc) (void);             /* To get that char                  */
+	int (*tstc) (void);             /* To test if a char is ready...     */
+	int (*getc) (void);             /* To get that char                  */
 
 /* Other functions */
 
-        void *priv;                     /* Private extensions                */
-        struct list_head list;
+	void *priv;                     /* Private extensions                */
+	struct list_head list;
 };
 
 Currently used flags are DEV_FLAGS_INPUT, DEV_FLAGS_OUTPUT and DEV_FLAGS_SYSTEM,
@@ -139,13 +139,13 @@ II) Approach
   purpose. The following flags will be defined:
 
     STDIO_FLG_STDIN ..... This device will be used as an input device. All input
-                          from all devices with this flag set will be received
+			  from all devices with this flag set will be received
 			  and passed to the upper layers.
     STDIO_FLG_STDOUT .... This device will be used as an output device. All
-                          output sent to stdout will be routed to all devices
+			  output sent to stdout will be routed to all devices
 			  with this flag set.
     STDIO_FLG_STDERR .... This device will be used as an standard error output
-                          device. All output sent to stderr will be routed to
+			  device. All output sent to stderr will be routed to
 			  all devices with this flag set.
 
   The "list" member of this structure allows to have a linked list of all

+ 1 - 1
doc/driver-model/UDM-tpm.txt

@@ -14,7 +14,7 @@ controlling it is very much based on this. The API is very simple:
   int tis_open(void);
   int tis_close(void);
   int tis_sendrecv(const u8 *sendbuf, size_t send_size,
-                         u8 *recvbuf, size_t *recv_len);
+			 u8 *recvbuf, size_t *recv_len);
 
 The command operating the TPM chip only provides operations to send and receive
 bytes from the chip.

+ 3 - 3
doc/driver-model/UDM-watchdog.txt

@@ -41,13 +41,13 @@ II) Approach
   In the UDM each watchdog driver would register itself by a function
 
     int watchdog_device_register(struct instance *i,
-                                 const struct watchdog_device_ops *o);
+				 const struct watchdog_device_ops *o);
 
   The structure being defined as follows:
 
     struct watchdog_device_ops {
-        int (*disable)(struct instance *i);
-        void (*reset)(struct instance *i);
+	int (*disable)(struct instance *i);
+	void (*reset)(struct instance *i);
     };
 
   The watchdog_init() function will be dissolved into probe() function.

+ 10 - 10
drivers/mtd/nand/fsl_elbc_spl.c

@@ -59,20 +59,20 @@ static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
 	if (large) {
 		fmr |= FMR_ECCM;
 		out_be32(&regs->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
-		                     (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+				     (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
 		out_be32(&regs->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
-		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
-		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
-		         (FIR_OP_RBW << FIR_OP4_SHIFT));
+			 (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			 (FIR_OP_CA  << FIR_OP1_SHIFT) |
+			 (FIR_OP_PA  << FIR_OP2_SHIFT) |
+			 (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+			 (FIR_OP_RBW << FIR_OP4_SHIFT));
 	} else {
 		out_be32(&regs->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
 		out_be32(&regs->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
-		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
-		         (FIR_OP_RBW << FIR_OP3_SHIFT));
+			 (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			 (FIR_OP_CA  << FIR_OP1_SHIFT) |
+			 (FIR_OP_PA  << FIR_OP2_SHIFT) |
+			 (FIR_OP_RBW << FIR_OP3_SHIFT));
 	}
 
 	out_be32(&regs->fbcr, 0);

+ 4 - 4
drivers/mtd/nand/fsl_upm.c

@@ -112,10 +112,10 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 	fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
 
 	/*
-         * Some boards/chips needs this.  At least the MPC8360E-RDK
-         * needs it.  Probably weird chip, because I don't see any
-         * need for this on MPC8555E + Samsung K9F1G08U0A.  Usually
-         * here are 0-2 unexpected busy states per block read.
+	 * Some boards/chips needs this.  At least the MPC8360E-RDK
+	 * needs it.  Probably weird chip, because I don't see any
+	 * need for this on MPC8555E + Samsung K9F1G08U0A.  Usually
+	 * here are 0-2 unexpected busy states per block read.
 	 */
 	if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
 		fun_wait(fun);

+ 1 - 1
drivers/mtd/nand/nand_base.c

@@ -3282,7 +3282,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 
 	case NAND_ECC_NONE:
 		pr_warn("NAND_ECC_NONE selected by board driver. "
-		        "This is not recommended !!\n");
+			"This is not recommended !!\n");
 		chip->ecc.read_page = nand_read_page_raw;
 		chip->ecc.write_page = nand_write_page_raw;
 		chip->ecc.read_oob = nand_read_oob_std;

+ 2 - 2
drivers/mtd/nand/nand_util.c

@@ -142,8 +142,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 			ops.mode = MTD_OPS_AUTO_OOB;
 
 			result = mtd_write_oob(meminfo,
-			                            erase.addr,
-			                            &ops);
+						    erase.addr,
+						    &ops);
 			if (result != 0) {
 				printf("\n%s: MTD writeoob failure: %d\n",
 				       mtd_device, result);

+ 2 - 2
drivers/mtd/ubi/crc32.c

@@ -102,7 +102,7 @@ u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
 	if((len >= 4)){
 		/* load data 32 bits wide, xor data 32 bits wide. */
 		size_t save_len = len & 3;
-	        len = len >> 2;
+		len = len >> 2;
 		--b; /* use pre increment below(*++b) for speed */
 		do {
 			crc ^= *++b;
@@ -200,7 +200,7 @@ u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len)
 	if(likely(len >= 4)){
 		/* load data 32 bits wide, xor data 32 bits wide. */
 		size_t save_len = len & 3;
-	        len = len >> 2;
+		len = len >> 2;
 		--b; /* use pre increment below(*++b) for speed */
 		do {
 			crc ^= *++b;

+ 1 - 1
drivers/net/dm9000x.c

@@ -17,7 +17,7 @@ V0.11	06/20/2001	REG_0A bit3=1, default enable BP with DA match
 		R17 = (R17 & 0xfff0) | NF
 
 v1.00			modify by simon 2001.9.5
-	                change for kernel 2.4.x
+			change for kernel 2.4.x
 
 v1.1   11/09/2001	fix force mode bug
 

+ 1 - 1
drivers/net/plb2800_eth.c

@@ -260,7 +260,7 @@ static int plb2800_eth_recv(struct eth_device *dev)
 			printf("Received %d bytes\n", length);
 #endif
 			NetReceive((void*)(NetRxPackets[rx_new]),
-			            length - 4);
+				    length - 4);
 		}
 		else
 		{

+ 1 - 1
drivers/rtc/bfin_rtc.c

@@ -68,7 +68,7 @@ int rtc_set(struct rtc_time *tmp)
 
 	/* Calculate number of seconds this incoming time represents */
 	remain = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
-	                tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+			tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 
 	/* Figure out how many days since epoch */
 	days = remain / NUM_SECS_IN_DAY;

+ 1 - 1
drivers/rtc/pl031.c

@@ -73,7 +73,7 @@ int rtc_set(struct rtc_time *tmp)
 
 	/* Calculate number of seconds this incoming time represents */
 	tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
-	                tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+			tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 
 	RTC_WRITE_REG(RTC_LR, tim);
 

+ 2 - 2
drivers/spi/mpc8xxx_spi.c

@@ -110,10 +110,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		if (bitlen <= 16) {
 			if (bitlen <= 4)
 				spi->mode = (spi->mode & 0xff0fffff) |
-				            (3 << 20);
+					    (3 << 20);
 			else
 				spi->mode = (spi->mode & 0xff0fffff) |
-				            ((bitlen - 1) << 20);
+					    ((bitlen - 1) << 20);
 		} else {
 			spi->mode = (spi->mode & 0xff0fffff);
 			/* Set up the next iteration if sending > 32 bits */

+ 5 - 5
drivers/spi/omap3_spi.c

@@ -50,7 +50,7 @@ static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val)
 static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable)
 {
 	writel(enable, &ds->regs->channel[ds->slave.cs].chctrl);
-        /* Flash post writes to make immediate effect */
+	/* Flash post writes to make immediate effect */
 	readl(&ds->regs->channel[ds->slave.cs].chctrl);
 }
 
@@ -253,9 +253,9 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
 		writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
 	}
 
-        /* wait to finish of transfer */
-        while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
-                         OMAP3_MCSPI_CHSTAT_EOT));
+	/* wait to finish of transfer */
+	while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+			 OMAP3_MCSPI_CHSTAT_EOT));
 
 	/* Disable the channel otherwise the next immediate RX will get affected */
 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
@@ -359,7 +359,7 @@ int omap3_spi_txrx(struct spi_slave *slave,
 		rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
 	}
 	/* Disable the channel */
-        omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
+	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
 
 	/*if transfer must be terminated disable the channel*/
 	if (flags & SPI_XFER_END) {

+ 1 - 1
drivers/video/ati_radeon_fb.h

@@ -92,7 +92,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
 
 	/* initiate flush */
 	OUTREGP(RB2D_DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL,
-	        ~RB2D_DC_FLUSH_ALL);
+		~RB2D_DC_FLUSH_ALL);
 
 	for (i=0; i < 2000000; i++) {
 		if (!(INREG(RB2D_DSTCACHE_CTLSTAT) & RB2D_DC_BUSY))

+ 1 - 1
fs/ubifs/super.c

@@ -771,7 +771,7 @@ static int mount_ubifs(struct ubifs_info *c)
 	dbg_msg("node sizes:          ref %zu, cmt. start %zu, orph %zu",
 		UBIFS_REF_NODE_SZ, UBIFS_CS_NODE_SZ, UBIFS_ORPH_NODE_SZ);
 	dbg_msg("max. node sizes:     data %zu, inode %zu dentry %zu",
-	        UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ,
+		UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ,
 		UBIFS_MAX_DENT_NODE_SZ);
 	dbg_msg("dead watermark:      %d", c->dead_wm);
 	dbg_msg("dark watermark:      %d", c->dark_wm);

+ 1 - 1
include/configs/DU440.h

@@ -223,7 +223,7 @@
 	"flash_self=run ramargs addip addtty optargs;"			\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;"	\
-	        "bootm\0"						\
+		"bootm\0"						\
 	"rootpath=/tftpboot/du440/target_root_du440\0"			\
 	"img=/tftpboot/du440/uImage\0"					\
 	"kernel_addr=FFC00000\0"					\

+ 1 - 1
include/configs/P3G4.h

@@ -85,7 +85,7 @@
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_74xx\0"					\
 	"bootfile=/tftpboot/p3g4/uImage\0"				\
 	"kernel_addr=ff000000\0"					\

+ 3 - 3
include/configs/RBC823.h

@@ -262,8 +262,8 @@
  */
 #define SCCR_MASK	SCCR_EBDF11
 #define CONFIG_SYS_SCCR	(SCCR_RTDIV   | SCCR_RTSEL    | SCCR_CRQEN    | \
-		         SCCR_PRQEN   | SCCR_EBDF00   | \
-		         SCCR_COM01   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_PRQEN   | SCCR_EBDF00   | \
+			 SCCR_COM01   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD001 | \
 			 SCCR_DFALCD00)
 
@@ -344,7 +344,7 @@
 
 #define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS)
 #define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \
-		          BR_PS_8 | BR_V)
+			  BR_PS_8 | BR_V)
 
 /*
  * BR4 and OR4 (SDRAM)

+ 1 - 1
include/configs/alpr.h

@@ -148,7 +148,7 @@
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+		"bootm\0"						\
 	"net_nfs_fdt=tftp 200000 ${bootfile};"				\
 		"tftp ${fdt_addr} ${fdt_file};"				\
 		"run nfsargs addip addtty;"				\

+ 2 - 2
include/configs/devkit8000.h

@@ -278,8 +278,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
-		                                         CONFIG_SYS_INIT_RAM_SIZE - \
-		                                         GENERATED_GBL_DATA_SIZE)
+							 CONFIG_SYS_INIT_RAM_SIZE - \
+							 GENERATED_GBL_DATA_SIZE)
 
 /* SRAM config */
 #define CONFIG_SYS_SRAM_START              0x40200000

+ 1 - 1
include/configs/p3mx.h

@@ -194,7 +194,7 @@
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"u-boot=p3mx/u-boot/u-boot.bin\0"				\
 	"load=tftp 100000 ${u-boot}\0"					\

+ 1 - 1
include/configs/p3p440.h

@@ -129,7 +129,7 @@
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/p3p440/uImage\0"				\
 	"kernel_addr=ff800000\0"					\

+ 1 - 1
include/configs/pcs440ep.h

@@ -157,7 +157,7 @@
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_4xx\0"					\
 	"bootfile=/tftpboot/pcs440ep/uImage\0"				\
 	"kernel_addr=FFF00000\0"					\

+ 2 - 2
include/configs/pdnb3.h

@@ -131,7 +131,7 @@
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+		"bootm\0"						\
 	"rootpath=/opt/buildroot\0"					\
 	"bootfile=/tftpboot/netbox/uImage\0"				\
 	"kernel_addr=50080000\0"					\
@@ -280,7 +280,7 @@
 #define I2C_TRISTATE	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA)
 #define I2C_READ	((*IXP425_GPIO_GPINR & PB_SDA) != 0)
 #define I2C_SDA(bit)	if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA);	\
-	                else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
+			else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
 #define I2C_SCL(bit)	if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL);	\
 			else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL)
 #define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */

+ 1 - 1
include/configs/uc100.h

@@ -65,7 +65,7 @@
 	"flash_self=run ramargs addip addtty;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+		"bootm\0"						\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/uc100/uImage\0"				\
 	"kernel_addr=40000000\0"					\

+ 2 - 2
include/configs/zeus.h

@@ -322,7 +322,7 @@
 		" ramdisk_size=${ramdisk_size}\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-	        ":${hostname}:${netdev}:off panic=1\0"			\
+		":${hostname}:${netdev}:off panic=1\0"			\
 	"addtty=setenv bootargs ${bootargs} console=ttyS0,"		\
 		"${baudrate}\0"						\
 	"net_nfs=tftp ${kernel_mem_addr} ${file_kernel};"		\
@@ -352,7 +352,7 @@
 	"file_fs=/zeus/rootfs_ba.img\0"					\
 	"tftp_fs=tftp 100000 ${file_fs}\0"				\
 	"update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
-	        "cp.b 100000 ff300000 580000\0"				\
+		"cp.b 100000 ff300000 580000\0"				\
 	"upd_fs=run tftp_fs;run update_fs\0"				\
 	"bootcmd=chkreset;run ramargs addip addtty addmisc;"		\
 		"bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0"		\

+ 17 - 17
include/ddr_spd.h

@@ -39,7 +39,7 @@ typedef struct ddr1_spd_eeprom_s {
 	unsigned char dev_attr;    /* 22 SDRAM Device Attributes */
 	unsigned char clk_cycle2;  /* 23 Min SDRAM Cycle time @ CL=X-0.5 */
 	unsigned char clk_access2; /* 24 SDRAM Access from
-				         Clk @ CL=X-0.5 (tAC) */
+					 Clk @ CL=X-0.5 (tAC) */
 	unsigned char clk_cycle3;  /* 25 Min SDRAM Cycle time @ CL=X-1 */
 	unsigned char clk_access3; /* 26 Max Access from Clk @ CL=X-1 (tAC) */
 	unsigned char trp;         /* 27 Min Row Precharge Time (tRP)*/
@@ -112,9 +112,9 @@ typedef struct ddr2_spd_eeprom_s {
 	unsigned char ca_setup;    /* 32 Addr+Cmd Setup Time Before Clk (tIS) */
 	unsigned char ca_hold;     /* 33 Addr+Cmd Hold Time After Clk (tIH) */
 	unsigned char data_setup;  /* 34 Data Input Setup Time
-				         Before Strobe (tDS) */
+					 Before Strobe (tDS) */
 	unsigned char data_hold;   /* 35 Data Input Hold Time
-				         After Strobe (tDH) */
+					 After Strobe (tDH) */
 	unsigned char twr;         /* 36 Write Recovery time tWR */
 	unsigned char twtr;        /* 37 Int write to read delay tWTR */
 	unsigned char trtp;        /* 38 Int read to precharge delay tRTP */
@@ -128,40 +128,40 @@ typedef struct ddr2_spd_eeprom_s {
 	unsigned char pll_relock;  /* 46 PLL Relock time */
 	unsigned char Tcasemax;    /* 47 Tcasemax */
 	unsigned char psiTAdram;   /* 48 Thermal Resistance of DRAM Package from
-				         Top (Case) to Ambient (Psi T-A DRAM) */
+					 Top (Case) to Ambient (Psi T-A DRAM) */
 	unsigned char dt0_mode;    /* 49 DRAM Case Temperature Rise from Ambient
-				         due to Activate-Precharge/Mode Bits
+					 due to Activate-Precharge/Mode Bits
 					 (DT0/Mode Bits) */
 	unsigned char dt2n_dt2q;   /* 50 DRAM Case Temperature Rise from Ambient
-				         due to Precharge/Quiet Standby
+					 due to Precharge/Quiet Standby
 					 (DT2N/DT2Q) */
 	unsigned char dt2p;        /* 51 DRAM Case Temperature Rise from Ambient
-				         due to Precharge Power-Down (DT2P) */
+					 due to Precharge Power-Down (DT2P) */
 	unsigned char dt3n;        /* 52 DRAM Case Temperature Rise from Ambient
-				         due to Active Standby (DT3N) */
+					 due to Active Standby (DT3N) */
 	unsigned char dt3pfast;    /* 53 DRAM Case Temperature Rise from Ambient
-				         due to Active Power-Down with
+					 due to Active Power-Down with
 					 Fast PDN Exit (DT3Pfast) */
 	unsigned char dt3pslow;    /* 54 DRAM Case Temperature Rise from Ambient
-				         due to Active Power-Down with Slow
+					 due to Active Power-Down with Slow
 					 PDN Exit (DT3Pslow) */
 	unsigned char dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from Ambient
-				         due to Page Open Burst Read/DT4R4W
+					 due to Page Open Burst Read/DT4R4W
 					 Mode Bit (DT4R/DT4R4W Mode Bit) */
 	unsigned char dt5b;        /* 56 DRAM Case Temperature Rise from Ambient
-				         due to Burst Refresh (DT5B) */
+					 due to Burst Refresh (DT5B) */
 	unsigned char dt7;         /* 57 DRAM Case Temperature Rise from Ambient
-				         due to Bank Interleave Reads with
+					 due to Bank Interleave Reads with
 					 Auto-Precharge (DT7) */
 	unsigned char psiTApll;    /* 58 Thermal Resistance of PLL Package form
-				         Top (Case) to Ambient (Psi T-A PLL) */
+					 Top (Case) to Ambient (Psi T-A PLL) */
 	unsigned char psiTAreg;    /* 59 Thermal Reisitance of Register Package
-				         from Top (Case) to Ambient
+					 from Top (Case) to Ambient
 					 (Psi T-A Register) */
 	unsigned char dtpllactive; /* 60 PLL Case Temperature Rise from Ambient
-				         due to PLL Active (DT PLL Active) */
+					 due to PLL Active (DT PLL Active) */
 	unsigned char dtregact;    /* 61 Register Case Temperature Rise from
-				         Ambient due to Register Active/Mode Bit
+					 Ambient due to Register Active/Mode Bit
 					 (DT Register Active/Mode Bit) */
 	unsigned char spd_rev;     /* 62 SPD Data Revision Code */
 	unsigned char cksum;       /* 63 Checksum for bytes 0-62 */

+ 1 - 1
nand_spl/nand_boot_fsl_elbc.c

@@ -126,7 +126,7 @@ void nand_boot(void)
 	 * Load U-Boot image from NAND into RAM
 	 */
 	nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
-	          (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+		  (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
 
 	/*
 	 * Jump to U-Boot image

+ 1 - 1
post/lib_powerpc/andi.c

@@ -89,7 +89,7 @@ int cpu_post_test_andi (void)
 
 	    if (ret != 0)
 	    {
-	        post_log ("Error at andi test %d !\n", i);
+		post_log ("Error at andi test %d !\n", i);
 	    }
 	}
     }

+ 16 - 16
post/lib_powerpc/cpu_asm.h

@@ -112,64 +112,64 @@
 
 #define ASM_0(opcode)			(opcode)
 #define ASM_1(opcode, rd)		((opcode) +		\
-	                                 ((rd) << 21))
+					 ((rd) << 21))
 #define ASM_1C(opcode, cr)		((opcode) +		\
-	                                 ((cr) << 23))
+					 ((cr) << 23))
 #define ASM_11(opcode, rd, rs)		((opcode) +		\
-	                                 ((rd) << 21) +		\
+					 ((rd) << 21) +		\
 					 ((rs) << 16))
 #define ASM_11C(opcode, cd, cs)		((opcode) +		\
-	                                 ((cd) << 23) +		\
+					 ((cd) << 23) +		\
 					 ((cs) << 18))
 #define ASM_11X(opcode, rd, rs)		((opcode) +		\
-	                                 ((rs) << 21) +		\
+					 ((rs) << 21) +		\
 					 ((rd) << 16))
 #define ASM_11I(opcode, rd, rs, simm)	((opcode) +		\
-	                                 ((rd) << 21) +		\
+					 ((rd) << 21) +		\
 					 ((rs) << 16) +		\
 					 ((simm) & 0xffff))
 #define ASM_11IF(opcode, rd, rs, simm)	((opcode) +		\
-	                                 ((rd) << 21) +		\
+					 ((rd) << 21) +		\
 					 ((rs) << 16) +		\
 					 ((simm) << 11))
 #define ASM_11S(opcode, rd, rs, sh)	((opcode) +		\
-	                                 ((rs) << 21) +		\
+					 ((rs) << 21) +		\
 					 ((rd) << 16) +		\
 					 ((sh) << 11))
 #define ASM_11IX(opcode, rd, rs, imm)	((opcode) +		\
-	                                 ((rs) << 21) +		\
+					 ((rs) << 21) +		\
 					 ((rd) << 16) +		\
 					 ((imm) & 0xffff))
 #define ASM_12(opcode, rd, rs1, rs2)	((opcode) +		\
-	                                 ((rd) << 21) +		\
+					 ((rd) << 21) +		\
 					 ((rs1) << 16) +	\
 					 ((rs2) << 11))
 #define ASM_12F(opcode, fd, fs1, fs2)	((opcode) +		\
-	                                 ((fd) << 21) +		\
+					 ((fd) << 21) +		\
 					 ((fs1) << 16) +	\
 					 ((fs2) << 11))
 #define ASM_12X(opcode, rd, rs1, rs2)	((opcode) +		\
-	                                 ((rs1) << 21) +	\
+					 ((rs1) << 21) +	\
 					 ((rd) << 16) +		\
 					 ((rs2) << 11))
 #define ASM_2C(opcode, cr, rs1, rs2)	((opcode) +		\
-	                                 ((cr) << 23) +		\
+					 ((cr) << 23) +		\
 					 ((rs1) << 16) +	\
 					 ((rs2) << 11))
 #define ASM_1IC(opcode, cr, rs, imm)	((opcode) +		\
-	                                 ((cr) << 23) +		\
+					 ((cr) << 23) +		\
 					 ((rs) << 16) +		\
 					 ((imm) & 0xffff))
 #define ASM_122(opcode, rd, rs1, rs2, imm1, imm2)		\
 					((opcode) +		\
-	                                 ((rs1) << 21) +	\
+					 ((rs1) << 21) +	\
 					 ((rd) << 16) +		\
 					 ((rs2) << 11) +	\
 					 ((imm1) << 6) +	\
 					 ((imm2) << 1))
 #define ASM_113(opcode, rd, rs, imm1, imm2, imm3)		\
 					((opcode) +		\
-	                                 ((rs) << 21) +		\
+					 ((rs) << 21) +		\
 					 ((rd) << 16) +		\
 					 ((imm1) << 11) +	\
 					 ((imm2) << 6) +	\

+ 3 - 3
post/lib_powerpc/rlwimi.c

@@ -114,7 +114,7 @@ int cpu_post_test_rlwimi (void)
 
 		if (ret != 0)
 		{
-	            post_log ("Error at rlwimi test %d !\n", i);
+		    post_log ("Error at rlwimi test %d !\n", i);
 		}
 	    }
 
@@ -127,8 +127,8 @@ int cpu_post_test_rlwimi (void)
 
 		if (ret != 0)
 		{
-	            post_log ("Error at rlwimi test %d !\n", i);
-	        }
+		    post_log ("Error at rlwimi test %d !\n", i);
+		}
 	    }
 	}
     }

+ 3 - 3
post/lib_powerpc/rlwinm.c

@@ -107,7 +107,7 @@ int cpu_post_test_rlwinm (void)
 
 		if (ret != 0)
 		{
-	            post_log ("Error at rlwinm test %d !\n", i);
+		    post_log ("Error at rlwinm test %d !\n", i);
 		}
 	    }
 
@@ -120,8 +120,8 @@ int cpu_post_test_rlwinm (void)
 
 		if (ret != 0)
 		{
-	            post_log ("Error at rlwinm test %d !\n", i);
-	        }
+		    post_log ("Error at rlwinm test %d !\n", i);
+		}
 	    }
 	}
     }

Some files were not shown because too many files changed in this diff