Browse Source

sandbox: Remove OF_HOSTFILE

OF_HOSTFILE is used on sandbox configs only.  Although it's pretty
unique and not causing any confusions,  we are better of having simpler
config options for the DTB.

So let's replace that with the existing OF_BOARD.  U-Boot would then
have only three config options for the DTB origin.
- OF_SEPARATE, build separately from U-Boot
- OF_BOARD, board specific way of providing the DTB
- OF_EMBED embedded in the u-boot binary(should not be used in production

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias Apalodimas 2 years ago
parent
commit
e7fb789612

+ 3 - 3
Makefile

@@ -947,7 +947,7 @@ INPUTS-$(CONFIG_BINMAN_STANDALONE_FDT) += u-boot.dtb
 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
 INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
 endif
-INPUTS-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
+INPUTS-$(CONFIG_SANDBOX) += u-boot.dtb
 ifneq ($(CONFIG_SPL_TARGET),)
 INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 endif
@@ -1407,7 +1407,7 @@ u-boot-lzma.img: u-boot.bin.lzma FORCE
 
 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
-			$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE)$(CONFIG_BINMAN_STANDALONE_FDT),dts/dt.dtb) \
+			$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX)$(CONFIG_BINMAN_STANDALONE_FDT),dts/dt.dtb) \
 		,$(UBOOT_BIN)) FORCE
 	$(call if_changed,mkimage)
 	$(BOARD_SIZE_CHECK)
@@ -1421,7 +1421,7 @@ MKIMAGEFLAGS_u-boot.itb += -B 0x8
 
 ifdef U_BOOT_ITS
 u-boot.itb: u-boot-nodtb.bin \
-		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
+		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
 		$(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
 	$(BOARD_SIZE_CHECK)

+ 2 - 1
arch/arm/mach-stm32mp/boot_params.c

@@ -33,10 +33,11 @@ void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
  * Use the saved FDT address provided by TF-A at boot time (NT_FW_CONFIG =
  * Non Trusted Firmware configuration file) when the pointer is valid
  */
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
 	log_debug("%s: nt_fw_dtb=%lx\n", __func__, nt_fw_dtb);
 
+	*err = 0;
 	/* use external device tree only if address is valid */
 	if (nt_fw_dtb >= STM32_DDR_BASE) {
 		if (fdt_magic(nt_fw_dtb) == FDT_MAGIC)

+ 17 - 10
arch/sandbox/cpu/cpu.c

@@ -291,44 +291,51 @@ void invalidate_dcache_range(unsigned long start, unsigned long stop)
 {
 }
 
-int sandbox_read_fdt_from_file(void)
+void *board_fdt_blob_setup(int *ret)
 {
 	struct sandbox_state *state = state_get_current();
 	const char *fname = state->fdt_fname;
-	void *blob;
+	void *blob = NULL;
 	loff_t size;
 	int err;
 	int fd;
 
 	blob = map_sysmem(CONFIG_SYS_FDT_LOAD_ADDR, 0);
+	*ret = 0;
 	if (!state->fdt_fname) {
 		err = fdt_create_empty_tree(blob, 256);
 		if (!err)
 			goto done;
 		printf("Unable to create empty FDT: %s\n", fdt_strerror(err));
-		return -EINVAL;
+		*ret = -EINVAL;
+		goto fail;
 	}
 
 	err = os_get_filesize(fname, &size);
 	if (err < 0) {
-		printf("Failed to file FDT file '%s'\n", fname);
-		return err;
+		printf("Failed to find FDT file '%s'\n", fname);
+		*ret = err;
+		goto fail;
 	}
 	fd = os_open(fname, OS_O_RDONLY);
 	if (fd < 0) {
 		printf("Failed to open FDT file '%s'\n", fname);
-		return -EACCES;
+		*ret = -EACCES;
+		goto fail;
 	}
+
 	if (os_read(fd, blob, size) != size) {
 		os_close(fd);
-		return -EIO;
+		printf("Failed to read FDT file '%s'\n", fname);
+		*ret =  -EIO;
+		goto fail;
 	}
 	os_close(fd);
 
 done:
-	gd->fdt_blob = blob;
-
-	return 0;
+	return blob;
+fail:
+	return NULL;
 }
 
 ulong timer_get_boot_us(void)

+ 0 - 8
arch/sandbox/include/asm/u-boot-sandbox.h

@@ -76,14 +76,6 @@ int pci_unmap_physmem(const void *addr, unsigned long len,
  */
 void sandbox_set_enable_pci_map(int enable);
 
-/**
- * sandbox_read_fdt_from_file() - Read a device tree from a file
- *
- * Read a device tree file from a host file and set it up for use as the
- * control FDT.
- */
-int sandbox_read_fdt_from_file(void);
-
 /**
  * sandbox_reset() - reset sandbox
  *

+ 3 - 1
board/AndesTech/ax25-ae350/ax25-ae350.c

@@ -54,13 +54,15 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
 	return 0;
 }
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 #if CONFIG_IS_ENABLED(OF_BOARD)
 	return (void *)(ulong)gd->arch.firmware_fdt_addr;
 #elif CONFIG_IS_ENABLED(OF_SEPARATE)
 	return (void *)CONFIG_SYS_FDT_BASE;
 #else
+	*err = -EINVAL;
 	return NULL;
 #endif
 }

+ 2 - 1
board/Marvell/octeontx/board-fdt.c

@@ -301,7 +301,8 @@ int ft_board_setup(void *blob, struct bd_info *bd)
  *
  * @return	FDT base address received from ATF in x1 register
  */
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	return (void *)fdt_base_addr;
 }

+ 2 - 1
board/Marvell/octeontx2/board-fdt.c

@@ -215,7 +215,8 @@ int ft_board_setup(void *blob, struct bd_info *bd)
  *
  * @return	FDT base address received from ATF in x1 register
  */
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	return (void *)fdt_base_addr;
 }

+ 2 - 1
board/Marvell/octeontx2/board.c

@@ -226,12 +226,13 @@ static int do_go_uboot(struct cmd_tbl *cmdtp, int flag, int argc,
 	uboot_entry_t entry;
 	ulong addr;
 	void *fdt;
+	int err;
 
 	if (argc < 2)
 		return CMD_RET_USAGE;
 
 	addr = hextoul(argv[1], NULL);
-	fdt = board_fdt_blob_setup();
+	fdt = board_fdt_blob_setup(&err);
 	entry = (uboot_entry_t)addr;
 	flush_cache((ulong)addr, 1 << 20);	/* 1MiB should be enough */
 	dcache_disable();

+ 5 - 2
board/armltd/vexpress64/vexpress64.c

@@ -131,12 +131,15 @@ static phys_addr_t find_dtb_in_nor_flash(const char *partname)
 	return ~0;
 }
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
 	phys_addr_t fdt_rom_addr = find_dtb_in_nor_flash(CONFIG_JUNO_DTB_PART);
 
-	if (fdt_rom_addr == ~0UL)
+	*err = 0;
+	if (fdt_rom_addr == ~0UL) {
+		*err = -ENXIO;
 		return NULL;
+	}
 
 	return (void *)fdt_rom_addr;
 }

+ 2 - 1
board/broadcom/bcmstb/bcmstb.c

@@ -131,8 +131,9 @@ int board_late_init(void)
 	return 0;
 }
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	/* Stored the DTB address there during our init */
 	return (void *)prior_stage_fdt_address;
 }

+ 2 - 1
board/emulation/qemu-arm/qemu-arm.c

@@ -94,8 +94,9 @@ int dram_init_banksize(void)
 	return 0;
 }
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	/* QEMU loads a generated DTB for us at the start of RAM. */
 	return (void *)CONFIG_SYS_SDRAM_BASE;
 }

+ 2 - 1
board/emulation/qemu-ppce500/qemu-ppce500.c

@@ -333,8 +333,9 @@ u32 cpu_mask(void)
  *
  * @return virtual address of FDT received from QEMU in r3 register
  */
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	return get_fdt_virt();
 }
 

+ 2 - 1
board/emulation/qemu-riscv/qemu-riscv.c

@@ -72,8 +72,9 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	/* Stored the DTB address there during our init */
 	return (void *)(ulong)gd->arch.firmware_fdt_addr;
 }

+ 2 - 1
board/highbank/highbank.c

@@ -111,8 +111,9 @@ int ft_board_setup(void *fdt, struct bd_info *bd)
 }
 #endif
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	/*
 	 * The ECME management processor loads the DTB from NOR flash
 	 * into DRAM (at 4KB), where it gets patched to contain the

+ 6 - 2
board/raspberrypi/rpi/rpi.c

@@ -488,10 +488,14 @@ int board_init(void)
 /*
  * If the firmware passed a device tree use it for U-Boot.
  */
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
-	if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC)
+	*err = 0;
+	if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC) {
+		*err = -ENXIO;
 		return NULL;
+	}
+
 	return (void *)fw_dtb_pointer;
 }
 

+ 2 - 1
board/sifive/unleashed/unleashed.c

@@ -114,8 +114,9 @@ int misc_init_r(void)
 
 #endif
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	if (IS_ENABLED(CONFIG_OF_SEPARATE)) {
 		if (gd->arch.firmware_fdt_addr)
 			return (ulong *)(uintptr_t)gd->arch.firmware_fdt_addr;

+ 2 - 1
board/sifive/unmatched/unmatched.c

@@ -11,8 +11,9 @@
 #include <dm.h>
 #include <asm/sections.h>
 
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
+	*err = 0;
 	if (IS_ENABLED(CONFIG_OF_SEPARATE)) {
 		if (gd->arch.firmware_fdt_addr)
 			return (ulong *)(uintptr_t)gd->arch.firmware_fdt_addr;

+ 3 - 1
board/socrates/socrates.c

@@ -220,13 +220,15 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 #endif /* CONFIG_OF_BOARD_SETUP */
 
 #if defined(CONFIG_OF_SEPARATE)
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
 	void *fw_dtb;
 
+	*err = 0;
 	fw_dtb = (void *)(CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SECT_SIZE);
 	if (fdt_magic(fw_dtb) != FDT_MAGIC) {
 		printf("DTB is not passed via %x\n", (u32)fw_dtb);
+		*err = -ENXIO;
 		return NULL;
 	}
 

+ 5 - 2
board/xen/xenguest_arm64/xenguest_arm64.c

@@ -39,10 +39,13 @@ int board_init(void)
  * x0 is the physical address of the device tree blob (dtb) in system RAM.
  * This is stored in rom_pointer during low level init.
  */
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
-	if (fdt_magic(rom_pointer[0]) != FDT_MAGIC)
+	*err = 0;
+	if (fdt_magic(rom_pointer[0]) != FDT_MAGIC) {
+		*err = -ENXIO;
 		return NULL;
+	}
 	return (void *)rom_pointer[0];
 }
 

+ 2 - 1
board/xilinx/common/board.c

@@ -320,10 +320,11 @@ __maybe_unused int xilinx_read_eeprom(void)
 }
 
 #if defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
-void *board_fdt_blob_setup(void)
+void *board_fdt_blob_setup(int *err)
 {
 	void *fdt_blob;
 
+	*err = 0;
 	if (!IS_ENABLED(CONFIG_SPL_BUILD) &&
 	    !IS_ENABLED(CONFIG_VERSAL_NO_DDR) &&
 	    !IS_ENABLED(CONFIG_ZYNQMP_NO_DDR)) {

+ 0 - 1
configs/sandbox64_defconfig

@@ -88,7 +88,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_OF_HOSTFILE=y
 CONFIG_ENV_IS_NOWHERE=y
 CONFIG_ENV_IS_IN_EXT4=y
 CONFIG_ENV_EXT4_INTERFACE="host"

+ 0 - 1
configs/sandbox_defconfig

@@ -113,7 +113,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_OF_HOSTFILE=y
 CONFIG_ENV_IS_NOWHERE=y
 CONFIG_ENV_IS_IN_EXT4=y
 CONFIG_ENV_EXT4_INTERFACE="host"

+ 0 - 1
configs/sandbox_flattree_defconfig

@@ -69,7 +69,6 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_MAC_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_OF_CONTROL=y
-CONFIG_OF_HOSTFILE=y
 CONFIG_ENV_IS_NOWHERE=y
 CONFIG_ENV_IS_IN_EXT4=y
 CONFIG_ENV_EXT4_INTERFACE="host"

+ 0 - 1
configs/sandbox_noinst_defconfig

@@ -88,7 +88,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_HOSTFILE=y
 CONFIG_SPL_OF_PLATDATA=y
 CONFIG_ENV_IS_NOWHERE=y
 CONFIG_ENV_IS_IN_EXT4=y

+ 0 - 1
configs/sandbox_spl_defconfig

@@ -89,7 +89,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_HOSTFILE=y
 CONFIG_SPL_OF_PLATDATA=y
 CONFIG_SPL_OF_PLATDATA_INST=y
 CONFIG_ENV_IS_NOWHERE=y

+ 0 - 1
configs/tools-only_defconfig

@@ -16,7 +16,6 @@ CONFIG_AVB_BUF_SIZE=0x8192
 CONFIG_BOOTP_DNS2=y
 # CONFIG_CMD_DATE is not set
 CONFIG_OF_CONTROL=y
-CONFIG_OF_HOSTFILE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_BOOTP_SEND_HOSTNAME=y
 CONFIG_IP_DEFRAG=y

+ 3 - 4
doc/develop/devicetree/control.rst

@@ -108,10 +108,9 @@ If CONFIG_OF_BOARD is defined, a board-specific routine will provide the
 devicetree at runtime, for example if an earlier bootloader stage creates
 it and passes it to U-Boot.
 
-If CONFIG_OF_HOSTFILE is defined, then it will be read from a file on
-startup. This is only useful for sandbox. Use the -d flag to U-Boot to
-specify the file to read, -D for the default and -T for the test devicetree,
-used to run sandbox unit tests.
+If CONFIG_SANDBOX is defined, then it will be read from a file on
+startup. Use the -d flag to U-Boot to specify the file to read, -D for the
+default and -T for the test devicetree, used to run sandbox unit tests.
 
 You cannot use more than one of these options at the same time.
 

+ 1 - 9
dts/Kconfig

@@ -97,6 +97,7 @@ config OF_LIVE
 choice
 	prompt "Provider of DTB for DT control"
 	depends on OF_CONTROL
+	default OF_BOARD if SANDBOX
 
 config OF_SEPARATE
 	bool "Separate DTB for DT control"
@@ -115,20 +116,11 @@ config OF_EMBED
 
 config OF_BOARD
 	bool "Provided by the board (e.g a previous loader) at runtime"
-	depends on !SANDBOX
 	help
 	  If this option is enabled, the device tree will be provided by
 	  the board at runtime if the board supports it, instead of being
 	  bundled with the image.
 
-config OF_HOSTFILE
-	bool "Host filed DTB for DT control"
-	depends on SANDBOX
-	help
-	  If this option is enabled, DTB will be read from a file on startup.
-	  This is only useful for Sandbox.  Use the -d flag to U-Boot to
-	  specify the file to read.
-
 endchoice
 
 config DEFAULT_DEVICE_TREE

+ 3 - 1
include/fdtdec.h

@@ -1158,8 +1158,10 @@ int fdtdec_resetup(int *rescan);
  * Board-specific FDT initialization. Returns the address to a device tree blob.
  * Called when CONFIG_OF_BOARD is defined, or if CONFIG_OF_SEPARATE is defined
  * and the board implements it.
+ *
+ * @err internal error code if we fail to setup a DTB
  */
-void *board_fdt_blob_setup(void);
+void *board_fdt_blob_setup(int *err);
 
 /*
  * Decode the size of memory

+ 7 - 7
lib/fdtdec.c

@@ -1213,9 +1213,11 @@ static int uncompress_blob(const void *src, ulong sz_src, void **dstp)
  * For CONFIG_OF_SEPARATE, the board may optionally implement this to
  * provide and/or fixup the fdt.
  */
-__weak void *board_fdt_blob_setup(void)
+__weak void *board_fdt_blob_setup(int *err)
 {
 	void *fdt_blob = NULL;
+
+	*err = 0;
 #ifdef CONFIG_SPL_BUILD
 	/* FDT is at end of BSS unless it is in a different memory region */
 	if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS))
@@ -1226,6 +1228,7 @@ __weak void *board_fdt_blob_setup(void)
 	/* FDT is at end of image */
 	fdt_blob = (ulong *)&_end;
 #endif
+
 	return fdt_blob;
 }
 #endif
@@ -1607,12 +1610,9 @@ int fdtdec_setup(void)
 #  endif
 # elif defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
 	/* Allow the board to override the fdt address. */
-	gd->fdt_blob = board_fdt_blob_setup();
-# elif defined(CONFIG_OF_HOSTFILE)
-	if (sandbox_read_fdt_from_file()) {
-		puts("Failed to read control FDT\n");
-		return -1;
-	}
+	gd->fdt_blob = board_fdt_blob_setup(&ret);
+	if (ret)
+		return ret;
 # endif
 # ifndef CONFIG_SPL_BUILD
 	/* Allow the early environment to override the fdt address */

+ 1 - 1
scripts/Makefile.spl

@@ -300,7 +300,7 @@ endif
 #   - we have either OF_SEPARATE or OF_HOSTFILE
 build_dtb :=
 ifneq ($(CONFIG_$(SPL_TPL_)OF_REAL),)
-ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_OF_HOSTFILE),y)
+ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_SANDBOX),y)
 build_dtb := y
 endif
 endif