封欢 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 éve
..
Kconfig 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 éve
MAINTAINERS 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 éve
Makefile 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 éve
README 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 éve
ddr.c 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 éve
ls1028a.c 720f21763f initial uboot use package u-boot-2021.01.tar.gz 3 éve

README

Overview
--------
The LS1028A Reference Design (RDB) is a high-performance computing,
evaluation, and development platform that supports ARM SoC LS1028A and its
derivatives.

LS1028A SoC Overview
--------------------------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc

RDB Default Switch Settings (1: ON; 0: OFF)
-------------------------------------------
For XSPI NOR boot (default)
SW2: 1111_1000
SW3: 1111_0000
SW5: 0011_1001

For SD Boot
SW2: 1000_1000
SW3: 1111_0000
SW5: 0011_1001

For eMMC Boot
SW2: 1001_1000
SW3: 1111_0000
SW5: 0011_1001

LS1028ARDB board Overview
-------------------------
Processor
Two Arm Cortex- A72 processor cores:
- Based on 64-bit ARMv8 architecture
- Up to 1.3 GHz operation
- Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1
data cache
- Arranged as a single cluster of two cores sharing a single 1 MB L2
cache
DDR memory
- Five onboard 1G x8 discrete memory modules (Four data byte lanes
ECC)
- 32-bit data and 4-bit ECC
- One chip select
- Data transfer rates of up to 1.6 GT/s
- Single-bit error correction and double-bit error detection ECC (4-bit
check word across 32-bit data)
High-speed serial ports(SerDes)
- Lane 0: Supports one 1 GbE RJ45 SGMII, connected through the
Qualcomm AR8033 PHY
- Lane 1: Supports four 1.25 GbE RJ45 QSGMII, each connected
through the NXP F104S8A PHY
- Lane 2: Connects to one PCIe M.2 Key-E slot to support PCIe Gen3
(8 Gbit/s) cards
- Lane 3: Connects to one PCIe M.2 Key-E slot or one SATA M.2 Key-B
slot through a register mux to support either PCIe Gen 3 (8 Gbit/s) or
SATA Gen 3 cards (6 Gbit/s) at a time
eSDHC
- eSDHC1, eSDHC2
SPI
- Connects to two mikroBUS sockets to support mikro-click modules,
such as Bluetooth 4.0, 2.4 GHz IEEE 802.15.4 radio transceiver, near
field communications (NFC) controller
Octal SPI (XSPI)
- One 256 MB onboard XSPI serial NOR flash memory
- One 512 MB onboard XSPI serial NAND flash memory
- Supports a QSPI emulator for offboard QSPI emulation
I2C
- All system devices are accessed via I2C1, which is multiplexed on
I2C multiplexer PCA9848 to isolate address conflicts and reduce
capacitive load
- I2C1 is used for EEPROMs, RTC, INA220 current-power sensor,
thermal monitor, PCIe/SATA M.2 connectors and mikro-click modules
1 and 2
CAN
- The two CAN DB9 ports can support CAN FD fast phase at data rates of
up to 5 Mbit/s
Serial audio interface(SAI)
- Audio codec SGTL5000 provides headphone and audio LINEOUT for
stereo speakers
- IEEE1588 interface to support audio on SAI4

QDS Default Switch Settings (1: ON; 0: OFF)
-------------------------------------------
For SD Boot
SW1 : 1000_0000
SW2 : 1110_0110
SW3 : 0000_0010
SW4 : 0000_0000
SW5 : 0000_0000
SW6 : 0000_0000
SW7 : 1111_0011
SW8 : 1110_0000
SW9 : 1000_0001
SW10: 1110_0000

For XSPI Boot
SW1 : 1111_0000
SW2 : 0000_0110
SW3 : 0000_0010
SW4 : 0000_0000
SW5 : 0110_0000
SW6 : 0101_0000
SW7 : 1111_0011
SW8 : 1110_0000
SW9 : 1000_0000
SW10: 1110_0000

LS1028AQDS board Overview
-------------------------
Processor
Two Arm Cortex- A72 processor cores:
- Based on 64-bit ARMv8 architecture
- Up to 1.3 GHz operation
- Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1
data cache
- Arranged as a single cluster of two cores sharing a single 1 MB L2
cache
DDR memory
- Supports data rates of up to 1.6 GT/s for both, DDR4 and DDR3L
- Supports a single- or dual-ranked SODIMM or UDIMM connector
- 32-bit data and 4-bit ECC
- Supports x8/x16 devices
- Supports ECC error detection and correction
- 1.35 V or 1.2 V DDR power supply, with automatic tracking of VTT, to
all devices in case of DDR3L or DDR4, respectively. Power can
switch to 1.35 V or 1.2 V, based on the switch settings for DDR3L or
DDR4 devices, respectively
SerDes (Serializer/Deserializer)
- Four-lane (0-3) SerDes:
- Lane 0: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 10
Gbit SXGMII, 1 Gbit SGMII
- Lane 1: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
SGMII, 10 Gbit QXGMII, 5 Gbit QSGMII, 1 Gbit SGMII
- Lane 2: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
SGMII
- Lane 3: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
SGMII, SATA 2.0/3.0
- Four slots on SerDes lanes support PCIe Gen1/2/3, 1 Gbit SGMII
add-in cards
- Lane 1 connects to a 2x10 connector with SFP+ through a retimer;
lane 2 (TX lines) connects to an SMA connector
Lane 3 connects to 1x7 header to support SATA devices
eSDHC
- eSDHC1, eSDHC2
SPI
- SPI1 and SPI2 support three onboard SPI flash memory devices:
512 Mbit high-speed flash (with speed of up to 108/54 MHz)
memory for storage
4 Mbit low-speed flash memory (with speed of up to 40 MHz)
64 Mbit high-speed flash memory (with speed of up to 104/80
MHz)
- SPI3 supports one onboard 64 Mbit SPI flash memory (with speed of
up to 104/80 MHz)
- All memories operate at 1.8 V
- A header is provided on SPI1 to test SPI slave mode
I2C
- LS1028A supports eight I2C controllers
Serial audio interface(SAI)
Two SAI ports with audio codec SGTL5000:
- Include stereo LINEIN with support for external analog input
- Provide headphone and line output
Display
- DisplayPort connector to connect the DP data to a 4K display device
(computer monitor)
- eDP connector to connect the DP data to a 4K display panel