Maximilian Rehkopf b8d3b952ad firmware: bump version no. to 0.1.4a 12 年 前
..
bootldr 583309491c Change baudrate to more standard 115200 12 年 前
tests c07b8f42c2 firmware/test suite: add missing file tests.c 12 年 前
utils 6cff0f66e0 Firmware: auto-detect version number base in firmware image generator 12 年 前
Makefile 39f1548dbd firmware: add feature to run previously loaded file 12 年 前
README dc478186e5 Firmware: add words of wisdom in README after switching from Ubuntu to Fedora Core ;-) 12 年 前
bits.h 4bc455f12b SD acceleration, display file size in menu (fw side) 13 年 前
ccsbcs.c 40248e61af mk2 fw wip 13 年 前
cfg.c 0f3138124e add missing files cfg.[ch] and sysinfo.[ch] 12 年 前
cfg.h 0f3138124e add missing files cfg.[ch] and sysinfo.[ch] 12 年 前
cfgware.h 576cedd285 Update embedded FPGA config 12 年 前
cic.c 97aef4a2d3 Firmware: gather+display system information 12 年 前
cic.h 97aef4a2d3 Firmware: gather+display system information 12 年 前
cli.c 023901cab2 Firmware: refactor SNES reset pulse 12 年 前
cli.h d4b7d9630b cic interface, cli for real this time... 13 年 前
clock.c 57bb6351e7 Firmware: change CPU frequency to 88MHz 12 年 前
clock.h 40248e61af mk2 fw wip 13 年 前
conf2h.awk e121b34cf4 Initial Commit 15 年 前
config b8d3b952ad firmware: bump version no. to 0.1.4a 12 年 前
config.h e2af175f05 Correct baudrate on normal application. 12 年 前
crc.S 31d9e1a1d2 some sanity checks, early status messages 13 年 前
crc.h 40248e61af mk2 fw wip 13 年 前
crc16.c bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 年 前
crc16.h bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 年 前
crc32.c 46a42fe5ac mk2 fw: iap preparation, so96 mapper, reduce db size, delay with real sleep mode, cli 13 年 前
crc32.h 220b8c32a4 SaveRAM+directory CRC16 -> CRC32 13 年 前
diskio.h 2eeaaefcef Firmware/SD: implement FatFs CTRL_SYNC ioctl (issue #4) 12 年 前
faulthandler.c fa28f6035e mk2 fw wip 13 年 前
ff.c f4b8d57810 Firmware/FatFs: make f_gets break on NUL character as well 12 年 前
ff.h 3fda86125c firmware: speed up directory scanning 12 年 前
ffconf.h 39f1548dbd firmware: add feature to run previously loaded file 12 年 前
fileops.c 39f1548dbd firmware: add feature to run previously loaded file 12 年 前
fileops.h 39f1548dbd firmware: add feature to run previously loaded file 12 年 前
filetypes.c 91458011aa minor comment cleanup 12 年 前
filetypes.h 11bf7ffd5b firmware: case-insensitive system directory hiding 12 年 前
flash.cfg d9abb0811e begin ARM firmware 13 年 前
flash.script c97278c3d6 Firmware: adjust to reduced bootloader size 12 年 前
fpga.c 3ecf4954a0 firmware: add some FPGA sanity checks; fix led_panic behavior 12 年 前
fpga.h 3bf7788693 Firmware: remove now unused mcu_ovr statements 12 年 前
fpga_spi.c 0d02bfded7 Firmware: adjust to SPI changes 12 年 前
fpga_spi.h d9e1680800 Firmware: remove SPI speed switching 12 年 前
init.gdb 40248e61af mk2 fw wip 13 年 前
integer.h f063cb31f9 mk2 fw wip (cleanup indent+comment) 13 年 前
irq.c e99c5eb863 firmware: add missing irq.c 13 年 前
led.c 3ecf4954a0 firmware: add some FPGA sanity checks; fix led_panic behavior 12 年 前
led.h b7654290a1 LED PWM 13 年 前
lpc1754.cfg 40a2ae00fb Firmware/build: Be more OpenOCD 0.4.0 friendly 12 年 前
lpc1754.ld c97278c3d6 Firmware: adjust to reduced bootloader size 12 年 前
main.c 1be6885223 Firmware: bump default date 12 年 前
memory.c e23a76d812 Firmware: properly enable offloading before f_lseek 12 年 前
memory.h 9baa4b7f9f Firmware: move SaveRAM to $E00000 12 年 前
msu1.c a9ea821c0d Firmware: implement MSU1 interface changes 12 年 前
msu1.h 1183718234 Firmware: ST0010 support + peripheral enable switches 13 年 前
openocd-usb.cfg 40a2ae00fb Firmware/build: Be more OpenOCD 0.4.0 friendly 12 年 前
power.c 72b9444861 firmware: initial power management 13 年 前
power.h 72b9444861 firmware: initial power management 13 年 前
printf.c fa28f6035e mk2 fw wip 13 年 前
reset.cfg db45a5afaf mk2 fw wip 13 年 前
rle.c d7efa83e71 firmware: RLE 13 年 前
rle.h d7efa83e71 firmware: RLE 13 年 前
rtc.c bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 年 前
rtc.h bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 年 前
sdcard.h 83f3307680 mk2 fw wip 13 年 前
sdnative.c 2eeaaefcef Firmware/SD: implement FatFs CTRL_SYNC ioctl (issue #4) 12 年 前
sdnative.h 2eeaaefcef Firmware/SD: implement FatFs CTRL_SYNC ioctl (issue #4) 12 年 前
smc.c 45b67d0f1a Firmware: Change ROM size detection for broken headers 12 年 前
smc.h 3436ccf46a Firmware: improve map detection 12 年 前
snes.c c80bdfbf59 Firmware: do not turn off write LED in case of periodic SRAM saving 12 年 前
snes.h 023901cab2 Firmware: refactor SNES reset pulse 12 年 前
snesboot.h 9eebd5cd73 Firmware: embed new SNES boot message code 12 年 前
sort.c 3db272662c firmware: disregard trailing slash when sorting directory names 12 年 前
sort.h fa28f6035e mk2 fw wip 13 年 前
spi.c d9e1680800 Firmware: remove SPI speed switching 12 年 前
spi.h d9e1680800 Firmware: remove SPI speed switching 12 年 前
startup.S d9abb0811e begin ARM firmware 13 年 前
sysinfo.c 0f3138124e add missing files cfg.[ch] and sysinfo.[ch] 12 年 前
sysinfo.h 0f3138124e add missing files cfg.[ch] and sysinfo.[ch] 12 年 前
tests.h 747e04e010 firmware: add tests.h 13 年 前
timer.c d88fbb6124 firmware/timer: move constants to header files 12 年 前
timer.h d88fbb6124 firmware/timer: move constants to header files 12 年 前
uart.c e2e628d6fb preliminary MSU-1 audio support 13 年 前
uart.h 561477ec53 SD native write support (still needs error handling), DB creation update (display file sizes) 13 年 前
xmodem.c f6df5e1158 Firmware: remove magic number for XModem block size 12 年 前
xmodem.h f6df5e1158 Firmware: remove magic number for XModem block size 12 年 前

README

How to build:

a) Build requirements
* make
* Cortex M3 toolchain
* snescom/sneslink
* Xilinx FPGA synthesis tool (e.g. ISE WebPack)
* PIC assembler

b) Cortex M3 toolchain
* obtain the cm3-toolchain builder:
git clone http://snowcat.de/toolchain-cm3.git/
* build the cm3-toolchain. Some tools, libraries, and headers are required,
including but probably not limited to:
- libz-dev
- libcloog-ppl-dev
- texinfo
- libmpfr-dev
- libgmp3-dev
- gawk
- bison
- recode
- flex
- libncurses5-dev
- libexpat-dev
- make
- gcc
Package names may differ for your distribution.
Newer gccs complain when compiling binutils, so you may have to add
'--disable-werror' to the compiler options for binutils in the Makefile.
The Makefile will install immediately so make sure you can write to the
installation directory.

c) snescom/sneslink
* http://bisqwit.iki.fi/source/snescom.html

d) ISE WebPack
* http://www.xilinx.com/products/design-tools/ise-design-suite/ise-webpack.htm

e) PIC assembler
* e.g. GPUTILS, http://gputils.sourceforge.net/

f) general order of operations
1) program the PIC (cic/supercic/supercic-key.asm)
2) build and program the bootloader.
3) build the firmware and copy it to the memory card
4) build the snes menu and copy it to the memory card
5) build and compress the FPGA configuration and copy it to the memory card
6) insert memory card, power on; the bootloader should begin flashing the
firmware and boot it

1) Programming the PIC
Use a PIC assembler + programmer of your choice and program a PIC12F629 with
cic/supercic/supercic-key.asm. Make sure that the clock source is set to
EC_OSC and MCLRE is disabled.
After programming you can solder the PIC to the board and short JP401.
Open JP401 in case you need to reprogram the PIC on board.

2) Building & programming the bootloader
The Makefile is prepared for JTAG programming using OpenOCD 0.4 and an FT2232
based USB-JTAG adapter.
Connect a JTAG cable to J401 (14-pin header). The pinout is printed on the
board. cd to src/bootldr and make && make program.

3) Building the firmware
cd to src/utils and make.
cd to src/ and make.
You should obtain a firmware file called obj/firmware.img. Copy this file to
/sd2snes/firmware.img.

4) Building the SNES menu
snescom is required.
cd to snes/ and make.
Copy the resulting file menu.bin to /sd2snes/menu.bin.

5) Building the FPGA configuration
Compile the RLE compressor in utils/rle.c:
$ gcc -Wall -o rle rle.c

Load verilog/sd2snes/sd2snes.xise in Xilinx ISE (or create your own project).
Target is a XC3S400-4PQ208.
Generate the programming file and compress it using utils/rle.c:
$ rle main.bit fpga_base.bit

Copy fpga_base.bit to /sd2snes/fpga_base.bit