1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- A33-OLinuXino
- Intro
- =====
- This board is based on Allwinner A33 SoC.
- Home Page: https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware
- Wiki: https://wiki.amarulasolutions.com/bsp/sunxi/a33/Olimex-A33-Olinuxino.html
- How to build it
- ===============
- Configure Buildroot:
- $ make olimex_a33_olinuxino_defconfig
- Build everything by running:
- $ make
- Result of the build
- -------------------
- After building, you should get a tree like this:
- output/images/
- ├── boot.scr
- ├── rootfs.ext2
- ├── rootfs.ext4 -> rootfs.ext2
- ├── rootfs.tar
- ├── sdcard.img
- ├── sun8i-a33-olinuxino.dtb
- ├── u-boot.bin
- ├── u-boot-sunxi-with-spl.bin
- └── zImage
- How to write the SD card
- ========================
- The sdcard.img file is a complete bootable image ready to be written
- on the boot medium. To install it, simply copy the image to a uSD
- card:
- # dd if=output/images/sdcard.img of=/dev/sdX
- Where 'sdX' is the device node of the uSD.
- Eject the SD card, insert it in the A33-OLinuXino board, and power it up.
|