A33-OLinuXino Intro ===== This board is based on Allwinner A33 SoC. Home Page: https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware Wiki: https://wiki.amarulasolutions.com/bsp/sunxi/a33/Olimex-A33-Olinuxino.html How to build it =============== Configure Buildroot: $ make olimex_a33_olinuxino_defconfig Build everything by running: $ make Result of the build ------------------- After building, you should get a tree like this: output/images/ ├── boot.scr ├── rootfs.ext2 ├── rootfs.ext4 -> rootfs.ext2 ├── rootfs.tar ├── sdcard.img ├── sun8i-a33-olinuxino.dtb ├── u-boot.bin ├── u-boot-sunxi-with-spl.bin └── zImage How to write the SD card ======================== The sdcard.img file is a complete bootable image ready to be written on the boot medium. To install it, simply copy the image to a uSD card: # dd if=output/images/sdcard.img of=/dev/sdX Where 'sdX' is the device node of the uSD. Eject the SD card, insert it in the A33-OLinuXino board, and power it up.