York Sun c58635add8 powerpc: mpc86xx: Update maintainer for MPC8610HPCD and MPC8641HPCN 7 anni fa
..
Kconfig 461be2f96e kconfig: remove redundant "string" type in arch and board Kconfigs 9 anni fa
MAINTAINERS c58635add8 powerpc: mpc86xx: Update maintainer for MPC8610HPCD and MPC8641HPCN 7 anni fa
Makefile 5614e71b49 Driver/DDR: Moving Freescale DDR driver to a common driver 10 anni fa
README a187559e3d Use correct spelling of "U-Boot" 8 anni fa
ddr.c 5b8031ccb4 Add more SPDX-License-Identifier tags 8 anni fa
law.c 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files 11 anni fa
mpc8610hpcd.c f1683aa73c board_f: Rename initdram() to dram_init() 7 anni fa
mpc8610hpcd_diu.c 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files 11 anni fa

README

Freescale MPC8610HPCD board
===========================


Building U-Boot
---------------

$ make MPC8610HPCD_config
Configuring for MPC8610HPCD board...

$ make


Flashing U-Boot
---------------
The flash is 128M starting at 0xF800_0000.

The alternate image is at 0xFBF0_0000
The boot image is at 0xFFF0_0000.


To Flash U-Boot into the booting bank:

tftp 1000000 u-boot.bin
protect off all
erase fff00000 +$filesize
cp.b 1000000 fff00000 $filesize


To Flash U-Boot into the alternate bank

tftp 1000000 u-boot.bin
erase fbf00000 +$filesize
cp.b 1000000 fbf00000 $filesize


pixis_reset command
-------------------
A new command, "pixis_reset", is introduced to reset mpc8610hpcd board
using the FPGA sequencer. When the board restarts, it has the option
of using either the current or alternate flash bank as the boot
image, with or without the watchdog timer enabled, and finally with
or without frequency changes.

Usage is;

pixis_reset
pixis_reset altbank
pixis_reset altbank wd
pixis_reset altbank cf
pixis_reset cf

Examples;

/* reset to current bank, like "reset" command */
pixis_reset

/* reset board but use the to alternate flash bank */
pixis_reset altbank

/* reset board, use alternate flash bank with watchdog timer enabled*/
pixis_reset altbank wd

/* reset board to alternate bank with frequency changed.
* 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
*/
pixis-reset altbank cf 40 2.5 10


DIP Switch Settings
-------------------
To manually switch the flash banks using the DIP switch
settings, toggle both SW6:1 and SW6:2.