Переглянути джерело

arm: vf610: Add IOMUX support for Vybrid VF610

This patch adds the IOMUX support for Vybrid VF610 platform.

There is a little difference for IOMUXC module between VF610 and i.MX
platform, the muxmode and pad configuration share one 32bit register on
VF610, but they are two independent registers on I.MX platform. A
CONFIG_IOMUX_SHARE_CONFIG_REG was introduced to fit this difference.

Signed-off-by: Alison Wang <b18965@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Alison Wang 11 роки тому
батько
коміт
cfd701b5f3

+ 1 - 1
arch/arm/imx-common/Makefile

@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB     = $(obj)libimx-common.o
 
-ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6))
+ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 vf610))
 COBJS-y	= iomux-v3.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx5 mx6))

+ 6 - 0
arch/arm/imx-common/iomux-v3.c

@@ -48,8 +48,14 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 	if (sel_input_ofs)
 		__raw_writel(sel_input, base + sel_input_ofs);
 
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+	if (!(pad_ctrl & NO_PAD_CTRL))
+		__raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl,
+			base + pad_ctrl_ofs);
+#else
 	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
 		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+#endif
 }
 
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,

+ 18 - 0
arch/arm/include/asm/imx-common/iomux-v3.h

@@ -121,6 +121,24 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_DSE_40ohm	(6 << 3)
 #define PAD_CTL_DSE_34ohm	(7 << 3)
 
+#elif defined(CONFIG_VF610)
+
+#define PAD_MUX_MODE_SHIFT	20
+
+#define PAD_CTL_SPEED_MED	(1 << 12)
+#define PAD_CTL_SPEED_HIGH	(3 << 12)
+
+#define PAD_CTL_DSE_50ohm	(3 << 6)
+#define PAD_CTL_DSE_25ohm	(6 << 6)
+#define PAD_CTL_DSE_20ohm	(7 << 6)
+
+#define PAD_CTL_PUS_47K_UP	(1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP	(2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PKE		(1 << 3)
+#define PAD_CTL_PUE		(1 << 2 | PAD_CTL_PKE)
+
+#define PAD_CTL_OBE_IBE_ENABLE	(3 << 0)
+
 #else
 
 #define PAD_CTL_DVS		(1 << 13)