ikari cb859f3bfb Firmware: add SD debugging message 12 år sedan
..
bootldr 3506cb0ba2 Firmware/bootldr: size reduction and stability measures 12 år sedan
tests 5f87768a14 Firmware: remove unnecessary crc16.c from Makefile 12 år sedan
utils cb202569d1 firmware: bootloader with firmware upgrade 13 år sedan
Makefile 97aef4a2d3 Firmware: gather+display system information 12 år sedan
README 65e26cb0c3 basic build instructions 12 år sedan
bits.h 4bc455f12b SD acceleration, display file size in menu (fw side) 13 år sedan
ccsbcs.c 40248e61af mk2 fw wip 13 år sedan
cfgware.h 91d8637dfe Firmware: embed updated sd2sneslite into firmware 12 år sedan
cic.c 97aef4a2d3 Firmware: gather+display system information 12 år sedan
cic.h 97aef4a2d3 Firmware: gather+display system information 12 år sedan
cli.c 97aef4a2d3 Firmware: gather+display system information 12 år sedan
cli.h d4b7d9630b cic interface, cli for real this time... 13 år sedan
clock.c bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 år sedan
clock.h 40248e61af mk2 fw wip 13 år sedan
conf2h.awk e121b34cf4 Initial Commit 15 år sedan
config a52638b4be Firmware: update version number to 0.1.2 12 år sedan
config.h a52638b4be Firmware: update version number to 0.1.2 12 år sedan
crc.S 31d9e1a1d2 some sanity checks, early status messages 13 år sedan
crc.h 40248e61af mk2 fw wip 13 år sedan
crc16.c bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 år sedan
crc16.h bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 år sedan
crc32.c 46a42fe5ac mk2 fw: iap preparation, so96 mapper, reduce db size, delay with real sleep mode, cli 13 år sedan
crc32.h 220b8c32a4 SaveRAM+directory CRC16 -> CRC32 13 år sedan
diskio.h e2e628d6fb preliminary MSU-1 audio support 13 år sedan
faulthandler.c fa28f6035e mk2 fw wip 13 år sedan
ff.c b8f4c9b584 Firmware: optimize non-sector-aligned SD DMA reads (bugfix) 12 år sedan
ff.h 3fda86125c firmware: speed up directory scanning 12 år sedan
ffconf.h 90b91583a1 Firmware: use FatFS FASTSEEK option for MSU1 file access 12 år sedan
fileops.c 3fda86125c firmware: speed up directory scanning 12 år sedan
fileops.h 3fda86125c firmware: speed up directory scanning 12 år sedan
filetypes.c 97aef4a2d3 Firmware: gather+display system information 12 år sedan
filetypes.h 3fda86125c firmware: speed up directory scanning 12 år sedan
flash.cfg d9abb0811e begin ARM firmware 13 år sedan
flash.script c97278c3d6 Firmware: adjust to reduced bootloader size 12 år sedan
fpga.c fcac85d19b Firmware: minor cleanups/comments 12 år sedan
fpga.h 3bf7788693 Firmware: remove now unused mcu_ovr statements 12 år sedan
fpga_spi.c b272a6fc1c Firmware: optimize non-sector-aligned SD DMA reads 12 år sedan
fpga_spi.h afc26397b1 Firmware: region override (patch register $213f) 12 år sedan
init.gdb 40248e61af mk2 fw wip 13 år sedan
integer.h f063cb31f9 mk2 fw wip (cleanup indent+comment) 13 år sedan
irq.c e99c5eb863 firmware: add missing irq.c 13 år sedan
led.c bc28fed22a Firmware: correct LED PWM initialization 12 år sedan
led.h b7654290a1 LED PWM 13 år sedan
lpc1754.cfg 40a2ae00fb Firmware/build: Be more OpenOCD 0.4.0 friendly 13 år sedan
lpc1754.ld c97278c3d6 Firmware: adjust to reduced bootloader size 12 år sedan
main.c 3436ccf46a Firmware: improve map detection 12 år sedan
memory.c afc26397b1 Firmware: region override (patch register $213f) 12 år sedan
memory.h 97aef4a2d3 Firmware: gather+display system information 12 år sedan
msu1.c da2386e453 Firmware/MSU1: stop DAC at end of audio file 12 år sedan
msu1.h 1183718234 Firmware: ST0010 support + peripheral enable switches 13 år sedan
openocd-usb.cfg 40a2ae00fb Firmware/build: Be more OpenOCD 0.4.0 friendly 13 år sedan
power.c 72b9444861 firmware: initial power management 13 år sedan
power.h 72b9444861 firmware: initial power management 13 år sedan
printf.c fa28f6035e mk2 fw wip 13 år sedan
reset.cfg db45a5afaf mk2 fw wip 13 år sedan
rle.c d7efa83e71 firmware: RLE 13 år sedan
rle.h d7efa83e71 firmware: RLE 13 år sedan
rtc.c bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 år sedan
rtc.h bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 år sedan
sdcard.h 83f3307680 mk2 fw wip 13 år sedan
sdnative.c cb859f3bfb Firmware: add SD debugging message 12 år sedan
sdnative.h 97aef4a2d3 Firmware: gather+display system information 12 år sedan
smc.c 3436ccf46a Firmware: improve map detection 12 år sedan
smc.h 3436ccf46a Firmware: improve map detection 12 år sedan
snes.c 3bf7788693 Firmware: remove now unused mcu_ovr statements 12 år sedan
snes.h 97aef4a2d3 Firmware: gather+display system information 12 år sedan
snesboot.h 9eebd5cd73 Firmware: embed new SNES boot message code 12 år sedan
sort.c 4bc455f12b SD acceleration, display file size in menu (fw side) 13 år sedan
sort.h fa28f6035e mk2 fw wip 13 år sedan
spi.c fcac85d19b Firmware: minor cleanups/comments 12 år sedan
spi.h d0e349a145 Firmware/SPI: move status register bit constants to spi.h 12 år sedan
startup.S d9abb0811e begin ARM firmware 13 år sedan
tests.h 747e04e010 firmware: add tests.h 13 år sedan
timer.c bfe9a91d07 firmware: adjustments for Mk.II Rev.C; enable timesetting from SNES menu 13 år sedan
timer.h 46a42fe5ac mk2 fw: iap preparation, so96 mapper, reduce db size, delay with real sleep mode, cli 13 år sedan
uart.c e2e628d6fb preliminary MSU-1 audio support 13 år sedan
uart.h 561477ec53 SD native write support (still needs error handling), DB creation update (display file sizes) 13 år sedan
xmodem.c f6df5e1158 Firmware: remove magic number for XModem block size 12 år sedan
xmodem.h f6df5e1158 Firmware: remove magic number for XModem block size 12 år sedan

README

How to build:

a) Build requirements
* make
* Cortex M3 toolchain
* snescom/sneslink
* Xilinx FPGA synthesis tool (e.g. ISE WebPack)
* PIC assembler

b) Cortex M3 toolchain
* obtain the cm3-toolchain builder:
git clone http://snowcat.de/toolchain-cm3.git/
* build the cm3-toolchain. Some tools, libraries, and headers are required,
including but probably not limited to:
- libz-dev
- libcloog-ppl-dev
- texinfo
- libmpfr-dev
- libgmp3-dev
- gawk
- bison
- recode
- flex
- libncurses5-dev
- libexpat-dev
- make
- gcc
Newer gccs complain when compiling binutils, so you may have to add
'--disable-werror' to the compiler options for binutils in the Makefile.
The Makefile will install immediately so make sure you can write to the
installation directory.

c) snescom/sneslink
* http://bisqwit.iki.fi/source/snescom.html

d) ISE WebPack
* http://www.xilinx.com/products/design-tools/ise-design-suite/ise-webpack.htm

e) PIC assembler
* e.g. GPUTILS, http://gputils.sourceforge.net/

f) general order of operations
1) program the PIC (cic/supercic/supercic-key.asm)
2) build and program the bootloader.
3) build the firmware and copy it to the memory card
4) build the snes menu and copy it to the memory card
5) build and compress the FPGA configuration and copy it to the memory card
6) insert memory card, power on; the bootloader should begin flashing the
firmware and boot it

1) Programming the PIC
Use a PIC assembler + programmer of your choice and program a PIC12F629 with
cic/supercic/supercic-key.asm. Make sure that the clock source is set to
EC_OSC and MCLRE is disabled.
After programming you can solder the PIC to the board and short JP401.
Open JP401 in case you need to reprogram the PIC on board.

2) Building & programming the bootloader
The Makefile is prepared for JTAG programming using OpenOCD 0.4 and an FT2232
based USB-JTAG adapter.
Connect a JTAG cable to J401 (14-pin header). The pinout is printed on the
board. cd to src/bootldr and make && make program.

3) Building the firmware
cd to src/utils and make.
cd to src/ and make.
You should obtain a firmware file called obj/firmware.img. Copy this file to
/sd2snes/firmware.img.

4) Building the SNES menu
snescom is required.
cd to snes/ and make.
Copy the resulting file menu.bin to /sd2snes/menu.bin.

5) Building the FPGA configuration
Compile the RLE compressor in utils/rle.c:
$ gcc -Wall -o rle rle.c

Load verilog/sd2snes/sd2snes.xise in Xilinx ISE (or create your own project).
Target is a XC3S400-4PQ208.
Generate the programming file and compress it using utils/rle.c:
$ rle main.bit fpga_base.bit

Copy fpga_base.bit to /sd2snes/fpga_base.bit