Masahiro Yamada b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle 3 years ago
..
Kconfig eef72440db imx: support i.MX8QM ROM 7720 a1 board 4 years ago
MAINTAINERS eef72440db imx: support i.MX8QM ROM 7720 a1 board 4 years ago
Makefile eef72440db imx: support i.MX8QM ROM 7720 a1 board 4 years ago
README fb0b862e81 imx: imx8qm_rom7720_a1: update README 3 years ago
imx8qm_rom7720_a1.c c05ed00afb common: Drop linux/delay.h from common header 4 years ago
imximage.cfg eef72440db imx: support i.MX8QM ROM 7720 a1 board 4 years ago
spl.c b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle 3 years ago

README

U-Boot for the NXP i.MX8QM ROM 7720a1 board

Quick Start
===========

- Build the ARM Trusted firmware binary
- Get scfw_tcm.bin and ahab-container.img
- Get imx-mkimage
- Build U-Boot
- Build imx-mkimage
- Flash the binary into the SD card
- Boot

Get and Build the ARM Trusted firmware
======================================

$ git clone https://source.codeaurora.org/external/imx/imx-atf
$ cd imx-atf/
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
$ make PLAT=imx8qm bl31

Get scfw_tcm.bin and ahab-container.img
==============================

$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
$ chmod +x imx-sc-firmware-1.1.bin
$ ./imx-sc-firmware-1.1.bin
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
$ chmod +x firmware-imx-8.0.bin
$ ./firmware-imx-8.0.bin

Or use this to avoid running random scripts from the internet,
but note that you must agree to the license the script displays:

$ dd if=imx-sc-firmware-1.1.bin of=imx-sc-firmware-1.1.tar.bz2 bs=37185 skip=1
$ tar -xf imx-sc-firmware-1.1.tar.bz2
$ cp imx-sc-firmware-1.1/mx8qm-val-scfw-tcm.bin $(builddir)

$ dd if=firmware-imx-8.0.bin of=firmware-imx-8.0.tar.bz2 bs=37180 skip=1
$ tar -xf firmware-imx-8.0.tar.bz2
$ cp firmware-imx-8.0/firmware/seco/mx8qm-ahab-container.img $(builddir)

Build U-Boot
============

$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qm_rom7720_a1_4G_defconfig
$ make u-boot.bin
$ make flash.bin

Flash the binary into the SD card
=================================

Burn the flash.bin binary to SD card offset 32KB:

$ sudo dd if=flash.bin of=/dev/sd[x] bs=1k seek=32 conv=fsync

Boot
====
Set Boot switch SW2: 1100.