Tom Rini d1bbf833aa Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx 4 vuotta sitten
..
Kconfig 55a42b33f2 arm: imx: add i.MX6ULL 14x14 EVK board support 7 vuotta sitten
MAINTAINERS 1d293e6804 imx: add i.MX6ULZ board 4 vuotta sitten
Makefile 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 6 vuotta sitten
README 2ffec69b6f mx6ull_14x14_evk: Add README file 7 vuotta sitten
imximage.cfg b09e28fc54 doc: update reference to README.imximage 4 vuotta sitten
mx6ullevk.c 03279b7d1f mx6ullevk: Enable Ethernet support 4 vuotta sitten
plugin.S 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 6 vuotta sitten

README

How to use U-Boot on Freescale MX6ULL 14x14 EVK
----------------------------------------------

- First make sure you have installed the dtc package (device tree compiler):

$ sudo apt-get install device-tree-compiler

- Build U-Boot for MX6ULL 14x14 EVK:

$ make mrproper
$ make mx6ull_14x14_evk_defconfig
$ make

This generates the u-boot-dtb.imx image in the current directory.

- Flash the u-boot-dtb.imx image into the micro SD card:

$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 && sync

- Jumper settings:

SW601: 0 0 1 0
Sw602: 1 0

Where 0 means bottom position and 1 means top position (from the switch label
numbers reference).

Connect the USB cable between the EVK and the PC for the console.
(The USB console connector is the one close the push buttons)

Insert the micro SD card in the board, power it up and U-Boot messages should
come up.

The link for the board: http://www.nxp.com/products/microcontrollers-and- \
processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/ \
i.mx6qp/evaluation-kit-for-the-i.mx-6ull-applications-processor:MCIMX6ULL-EVK