Masahiro Yamada b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle %!s(int64=3) %!d(string=hai) anos
..
Kconfig 0d331c035a imx: support i.MX8QM MEK board %!s(int64=5) %!d(string=hai) anos
MAINTAINERS 0d331c035a imx: support i.MX8QM MEK board %!s(int64=5) %!d(string=hai) anos
Makefile 0d331c035a imx: support i.MX8QM MEK board %!s(int64=5) %!d(string=hai) anos
README 62f0bfc016 imx8: update README %!s(int64=4) %!d(string=hai) anos
imx8qm_mek.c b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle %!s(int64=3) %!d(string=hai) anos
imximage.cfg 0d331c035a imx: support i.MX8QM MEK board %!s(int64=5) %!d(string=hai) anos
spl.c f7ae49fc4f common: Drop log.h from common header %!s(int64=4) %!d(string=hai) anos
uboot-container.cfg f31f8b0434 imx8qm_mek: switch to use container image %!s(int64=4) %!d(string=hai) anos

README

U-Boot for the NXP i.MX8QM EVK board

Quick Start
===========

- Build the ARM Trusted firmware binary
- Get scfw_tcm.bin and ahab-container.img
- Build U-Boot
- Flash the binary into the SD card
- Boot

Get and Build the ARM Trusted firmware
======================================

$ git clone https://source.codeaurora.org/external/imx/imx-atf
$ cd imx-atf/
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
$ make PLAT=imx8qm bl31

Get scfw_tcm.bin and ahab-container.img
==============================

$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
$ chmod +x imx-sc-firmware-1.1.bin
$ ./imx-sc-firmware-1.1.bin
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
$ chmod +x firmware-imx-8.0.bin
$ ./firmware-imx-8.0.bin

Copy the following binaries to U-Boot folder:

$ cp imx-atf/build/imx8qm/release/bl31.bin .
$ cp u-boot/u-boot.bin .

Copy the following firmwares U-Boot folder :

$ cp firmware-imx-7.6/firmware/seco/ahab-container.img .
$ cp imx-sc-firmware-0.7/mx8qm-mek-scfw-tcm.bin .

Build U-Boot
============
$ make imx8qm_mek_defconfig
$ make flash.bin

Flash the binary into the SD card
=================================

Burn the flash.bin binary to SD card offset 32KB:

$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32

Boot
====
Set Boot switch SW2: 1100.