Simon Glass 9a3b4ceb37 common: Move reset_cpu() to the CPU header 4 years ago
..
Kconfig d0dd73974c imx: add i.MX8QXP MEK board support 5 years ago
MAINTAINERS d0dd73974c imx: add i.MX8QXP MEK board support 5 years ago
Makefile 018e3fd2d1 imx8qxp: mek: default enable SPL 5 years ago
README 240ece49c7 imx: imx8qxp_mek: update README 4 years ago
imx8qxp_mek.c 9a3b4ceb37 common: Move reset_cpu() to the CPU header 4 years ago
imximage.cfg 018e3fd2d1 imx8qxp: mek: default enable SPL 5 years ago
spl.c 04ba62115c imx8qxp_mek: drop warning due to unused variable 5 years ago
uboot-container.cfg d94049ce19 imx8qxp_mek: switch to use container image 4 years ago

README

U-Boot for the NXP i.MX8QXP EVK board

Quick Start
===========

- Build the ARM Trusted firmware binary
- Get scfw_tcm.bin and ahab-container.img
- Build U-Boot
- Flash the binary into the SD card
- Boot

Get and Build the ARM Trusted firmware
======================================

$ git clone https://source.codeaurora.org/external/imx/imx-atf
$ cd imx-atf/
$ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0
$ make PLAT=imx8qx bl31

Get scfw_tcm.bin and ahab-container.img
==============================

$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin
$ chmod +x imx-sc-firmware-1.2.7.1.bin
$ ./imx-sc-firmware-1.2.7.1.bin
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin
$ chmod +x imx-seco-2.3.1.bin
$ ./imx-seco-2.3.1.bin

Copy the following binaries to U-Boot folder:

$ cp imx-atf/build/imx8qx/release/bl31.bin .
$ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img
$ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin .

Build U-Boot
============
$ make imx8qxp_mek_defconfig
$ make flash.bin

Flash the binary into the SD card
=================================

Burn the flash.bin binary to SD card offset 32KB:

$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32

Boot
====
Set Boot switch SW2: 1100.