123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354 |
- **************************
- Freescale i.MX25 PDK board
- **************************
- This file documents the Buildroot support for the Freescale i.MX25 PDK board.
- Build
- =====
- First, configure Buildroot for the i.MX25 PDK board:
- make mx25pdk_defconfig
- Build all components:
- make
- You will find in output/images/ the following files:
- - imx25-pdk.dtb
- - rootfs.ext4
- - rootfs.tar
- - sdcard.img
- - u-boot.imx
- - zImage
- Create a bootable SD card
- =========================
- To determine the device associated to the SD card have a look in the
- /proc/partitions file:
- cat /proc/partitions
- Buildroot prepares a bootable "sdcard.img" image in the output/images/
- directory, ready to be dumped on a SD card. Launch the following
- command as root:
- dd if=output/images/sdcard.img of=/dev/<your-sd-device>
- *** WARNING! This will destroy all the card content. Use with care! ***
- For details about the medium image layout, see the definition in
- board/freescale/common/imx/genimage.cfg.template.
- Boot the i.MX25 PDK board
- =========================
- To boot your newly created system:
- - insert the SD card in the SD slot of the board;
- - put a USB cable into the Debug USB Port and connect using a terminal
- emulator at 115200 bps, 8n1;
- - power on the board.
- Enjoy!
|