Peter Korsgaard aabd7f6ad0 orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11 5 years ago
..
patches e3c1c6e41e board/orangepi: add basic support for orangepi-zero board 7 years ago
boot.cmd e3c1c6e41e board/orangepi: add basic support for orangepi-zero board 7 years ago
genimage.cfg e3c1c6e41e board/orangepi: add basic support for orangepi-zero board 7 years ago
linux-extras.config aabd7f6ad0 orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11 5 years ago
readme.txt e3c1c6e41e board/orangepi: add basic support for orangepi-zero board 7 years ago

readme.txt

OrangePi Zero

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi Zero. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

$ make orangepi_zero_defconfig

Compile everything and build the SD card image:

$ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

$ sudo dd if=output/images/sdcard.img of=/dev/sdX