Davide Viti c08ec9191f configs/nanopi_r1: new defconfig %!s(int64=4) %!d(string=hai) anos
..
kernel c08ec9191f configs/nanopi_r1: new defconfig %!s(int64=4) %!d(string=hai) anos
uboot c08ec9191f configs/nanopi_r1: new defconfig %!s(int64=4) %!d(string=hai) anos
boot.cmd c08ec9191f configs/nanopi_r1: new defconfig %!s(int64=4) %!d(string=hai) anos
genimage.cfg c08ec9191f configs/nanopi_r1: new defconfig %!s(int64=4) %!d(string=hai) anos
readme.txt c08ec9191f configs/nanopi_r1: new defconfig %!s(int64=4) %!d(string=hai) anos

readme.txt

NanoPi R1

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the NanoPi R1. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

$ make nanopi_r1_defconfig

Compile everything and build the SD card image:

$ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

$ sudo dd if=output/images/sdcard.img of=/dev/sdX