Louis Aussedat d867e80773 configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of boot.cmd hace 4 años
..
rootfs_overlay 34deac05a5 board: Add FriendlyARM Nanopi NEO Plus2 support hace 4 años
extlinux.conf d867e80773 configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of boot.cmd hace 4 años
genimage.cfg d867e80773 configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of boot.cmd hace 4 años
linux-extras.config 34deac05a5 board: Add FriendlyARM Nanopi NEO Plus2 support hace 4 años
post-build.sh d867e80773 configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of boot.cmd hace 4 años
readme.txt 34deac05a5 board: Add FriendlyARM Nanopi NEO Plus2 support hace 4 años

readme.txt

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Nanopi NEO Plus2. With the current configuration
it will bring-up the board, and allow access through the serial console.

Nanopi NEO2 link:
http://nanopi.io/nanopi-neo-plus2.html

Wiki link:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

$ make friendlyarm_nanopi_neo_plus2_defconfig
$ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync

Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
is on the serial line, 115200 8N1.