Lothar Felten a0f0b54013 configs/bananapi_m2_ultra: new defconfig 5 years ago
..
boot.cmd a0f0b54013 configs/bananapi_m2_ultra: new defconfig 5 years ago
genimage.cfg a0f0b54013 configs/bananapi_m2_ultra: new defconfig 5 years ago
readme.txt a0f0b54013 configs/bananapi_m2_ultra: new defconfig 5 years ago

readme.txt

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Bananapi M2 ULtra. With the current
configuration it will bring-up the board, and allow access through the
serial console.

Bananapi M2 Ultra link:
http://www.banana-pi.org/m2u.html

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

$ make bananapi_m2_ultra_defconfig
$ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync

Insert the micro SDcard in your Bananapi M2 Ultra and power it up. The console
is on the serial line, 115200 8N1.