Theo Debrouwere e1a0a8858e BeagleBoard X15: new board 7 years ago
..
genimage.cfg e1a0a8858e BeagleBoard X15: new board 7 years ago
post-image.sh e1a0a8858e BeagleBoard X15: new board 7 years ago
readme.txt e1a0a8858e BeagleBoard X15: new board 7 years ago

readme.txt

BeagleBoard X15

Intro
=====
This config currently supports the beagleboard x15,
and generates a barebone image.

The image must be flashed to a SD card to be used.

How to build it
===============

$ make beagleboardx15_defconfig

Then you can edit the build options using

$ make menuconfig

Compile all and build a sdcard image:

$ make

Result of the build
-------------------

After building, you should get a tree like this:

output/images/
├── am57xx-beagle-x15.dtb
├── am57xx-beagle-x15-revb1.dtb
├── boot.vfat
├── MLO
├── rootfs.ext2
├── rootfs.ext4
├── rootfs.tar
├── sdcard.img
├── u-boot.img
├── u-boot-spl.bin
└── zImage

How to write the microSD card
=============================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

$ sudo dd if=output/images/sdcard.img of=/dev/sdX