Kaynağa Gözat

configs/freescale_t2080_qds_rdb_defconfig: new board

The board is setup to track upstream Linux as the official
vendor support was complete(depricated) at 4.1 via NXP SDKs.

The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Matt Weber 5 yıl önce
ebeveyn
işleme
bfb5a7a3c1
2 değiştirilmiş dosya ile 26 ekleme ve 0 silme
  1. 1 0
      .gitlab-ci.yml
  2. 25 0
      configs/freescale_t2080_qds_rdb_defconfig

+ 1 - 0
.gitlab-ci.yml

@@ -148,6 +148,7 @@ freescale_imx8mqevk_defconfig: { extends: .defconfig }
 freescale_imx8qxpmek_defconfig: { extends: .defconfig }
 freescale_p1025twr_defconfig: { extends: .defconfig }
 freescale_t1040d4rdb_defconfig: { extends: .defconfig }
+freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_a64_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig }
 galileo_defconfig: { extends: .defconfig }

+ 25 - 0
configs/freescale_t2080_qds_rdb_defconfig

@@ -0,0 +1,25 @@
+# Architecture
+BR2_powerpc64=y
+BR2_powerpc_e6500=y
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14"
+BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
+# BR2_TARGET_ROOTFS_TAR is not set
+