Forráskód Böngészése

configs/olimex_a20_olinuxino_lime_legacy: remove defconfig

The old 3.4 Linux kernel used by this defconfig doesn't build with gcc
7.x.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Francois Perrad 5 éve
szülő
commit
b8637d1a27

+ 0 - 1
.gitlab-ci.yml

@@ -186,7 +186,6 @@ olimex_a10_olinuxino_lime_defconfig: { extends: .defconfig }
 olimex_a13_olinuxino_defconfig: { extends: .defconfig }
 olimex_a20_olinuxino_lime2_defconfig: { extends: .defconfig }
 olimex_a20_olinuxino_lime_defconfig: { extends: .defconfig }
-olimex_a20_olinuxino_lime_legacy_defconfig: { extends: .defconfig }
 olimex_a20_olinuxino_micro_defconfig: { extends: .defconfig }
 olimex_a64_olinuxino_defconfig: { extends: .defconfig }
 olimex_imx233_olinuxino_defconfig: { extends: .defconfig }

+ 0 - 5
board/olimex/a20_olinuxino/boot-legacy.cmd

@@ -1,5 +0,0 @@
-setenv bootm_boot_mode sec
-setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 consoleblank=0 ${extra}
-ext4load mmc 0 0x43000000 /boot/script.bin
-ext4load mmc 0 0x48000000 /boot/zImage
-bootz 0x48000000

+ 0 - 5
board/olimex/a20_olinuxino/post-build.sh

@@ -1,8 +1,3 @@
 #!/bin/sh
 
 cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr
-
-if [ -e $BINARIES_DIR/script.bin ]; then
-	# mali requires a legacy kernel
-	cp $BINARIES_DIR/script.bin $TARGET_DIR/boot/script.bin
-fi

+ 0 - 7
board/olimex/a20_olinuxino/readme.txt

@@ -16,15 +16,9 @@ The following defconfigs are available:
    for the A20-OLinuXino-MICRO board using mainline kernel
  - olimex_a20_olinuxino_lime_defconfig
    for the A20-OLinuXino-LIME board using mainline kernel
- - olimex_a20_olinuxino_lime_legacy_defconfig
-   for the A20-OLinuXino-LIME board using legacy linux-sunxi kernel
  - olimex_a20_olinuxino_lime2_defconfig
    for the A20-OLinuXino-LIME2 board using mainline kernel
 
-The legacy linux-sunxi kernels are based on the vendor code drops.
-They are only useful when accelerated 3D graphics and multimedia support
-is strictly necessary.
-
 The Mainline Kernel is already a much better choice for a headless server.
 And also the mainline kernel works fine even for a basic Linux desktop
 system running on top of a simple framebuffer, which may be good enough for
@@ -51,7 +45,6 @@ After building, you should get a tree like this:
     output/images/
     +-- rootfs.ext2
     +-- rootfs.ext4 -> rootfs.ext2
-    +-- script.bin (lime_legacy)
     +-- sdcard.img
     +-- sun7i-a20-olinuxino-lime.dtb (lime, mainline)
     +-- sun7i-a20-olinuxino-lime2.dtb (lime2, mainline)

+ 0 - 56
configs/olimex_a20_olinuxino_lime_legacy_defconfig

@@ -1,56 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_EABIHF=y
-
-# The old 3.4 kernel doesn't build with gcc >= 7.x
-BR2_GCC_VERSION_6_X=y
-
-# Linux headers same as kernel, a 3.4 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_4=y
-
-# System configuration
-BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino"
-BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!"
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a20_olinuxino/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg"
-
-# Kernel, based on Linux version 3.4.113
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,dan-and,linux-sunxi,fc385cc6dfa350382ecc94a520a716b57e654410)/linux-fc385cc6dfa350382ecc94a520a716b57e654410.tar.gz"
-BR2_LINUX_KERNEL_USE_DEFCONFIG=y
-BR2_LINUX_KERNEL_DEFCONFIG="sun7i"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# sunxi packages
-BR2_PACKAGE_SUNXI_TOOLS=y
-BR2_PACKAGE_SUNXI_BOARDS=y
-BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/a20-olinuxino_lime.fex"
-BR2_PACKAGE_SUNXI_MALI=y
-BR2_PACKAGE_SUNXI_MALI_DBG=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Bootloaders
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_BIN=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-BR2_TARGET_UBOOT_BOOT_SCRIPT=y
-BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a20_olinuxino/boot-legacy.cmd"
-
-# Additional tools
-BR2_PACKAGE_HOST_GENIMAGE=y