Browse Source

boards/raspberrypi: update instructions for Raspberry Pi 2

The instructions for the Raspberry Pi 2 (aka model B2) are the same as
the ones for the Raspberry Pi, so:
  - state so in the existing readme
  - create a symlink raspberrypi2 -> raspberrypi

Also fix typo in spelling of "Raspberry Pi" (two words, not one).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN 9 years ago
parent
commit
7a0c134e7c
2 changed files with 9 additions and 3 deletions
  1. 8 3
      board/raspberrypi/readme.txt
  2. 1 0
      board/raspberrypi2

+ 8 - 3
board/raspberrypi/readme.txt

@@ -1,9 +1,14 @@
-RaspberryPi
+Raspberry Pi
 
 Intro
 =====
 
-To be able to use your RaspberryPi board with the images generated by
+These instructions apply to all models of the Raspberry Pi:
+  - the original models A and B,
+  - the "enhanced" models A+ and B+,
+  - the model B2 (aka Raspberry Pi 2).
+
+To be able to use your Raspberry Pi board with the images generated by
 Buildroot, you have to choose whether you will use:
 
     * Volatile rootfs in RAM (the rootfs is an initramfs) or
@@ -96,7 +101,7 @@ Mount the partitions (adjust 'sdX' to match your SDcard device):
 Install the binaries to the SDCard
 ----------------------------------
 
-At the root of the boot partition, the RaspberryPi must find the following
+At the root of the boot partition, the Raspberry Pi must find the following
 files:
 
     * bcm2708-rpi-b.dtb         [2]

+ 1 - 0
board/raspberrypi2

@@ -0,0 +1 @@
+raspberrypi