Browse Source

configs/warp7: Bump kernel and U-Boot versions

Bump U-Boot to 2019.07 and kernel to version 5.1.16.

Also
 - adjust the U-Boot binary name after DM conversion.
 - add missing notes about DFU

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pierre-Jean Texier 4 years ago
parent
commit
340df670fa
2 changed files with 23 additions and 9 deletions
  1. 18 4
      board/warp7/readme.txt
  2. 5 5
      configs/warp7_defconfig

+ 18 - 4
board/warp7/readme.txt

@@ -20,7 +20,7 @@ You will find in output/images/ the following files:
   - rootfs.ext4
   - rootfs.tar
   - sdcard.img
-  - u-boot.imx
+  - u-boot-dtb.imx
   - zImage
 
 Flash the eMMC image
@@ -61,11 +61,11 @@ Connect a USB to serial adapter between the host PC and warp7 serial
 USB port, and also a USB cable between the OTG warp7 port and the host
 PC.
 
-Copy u-boot.imx to the imx_usb_loader folder.
+Copy u-boot-dtb.imx to the imx_usb_loader folder.
 
-Load u-boot.imx via USB:
+Load u-boot-dtb.imx via USB:
 
-$ sudo ./imx_usb u-boot.imx
+$ sudo ./imx_usb u-boot-dtb.imx
 
 Then U-Boot should start and its messages will appear in the console program.
 
@@ -75,6 +75,20 @@ Use the default environment variables:
 
 => env default -f -a
 => saveenv
+
+Run the DFU command:
+=> dfu 0 mmc 0
+
+Transfer u-boot-dtb.imx that will be flashed into the eMMC:
+
+$ sudo dfu-util -D u-boot-dtb.imx -a boot
+
+Then on the U-Boot prompt the following message should be seen after a
+successful upgrade:
+
+#DOWNLOAD ... OK
+Ctrl+C to exit ...
+
 => ums 0 mmc 0
 
 sudo dd if=output/images/sdcard.img of=/dev/<your-emmc-device>

+ 5 - 5
configs/warp7_defconfig

@@ -3,8 +3,8 @@ BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
+# Linux headers same as kernel, a 5.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -15,7 +15,7 @@ BR2_ROOTFS_OVERLAY="board/warp7/rootfs_overlay"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1.16"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx7s-warp"
@@ -25,8 +25,8 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="warp7"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07"
+BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y
 
 # wifi firmware for brcm43430
 BR2_PACKAGE_LINUX_FIRMWARE=y