|
@@ -0,0 +1,76 @@
|
|
|
+Digilent Zybo
|
|
|
+=============
|
|
|
+
|
|
|
+This is the Buildroot board support for the Digilent Zybo. The Zybo is
|
|
|
+a development board based on the Xilinx Zynq-7000 based All-Programmable
|
|
|
+System-On-Chip.
|
|
|
+
|
|
|
+Zybo information including schematics, reference designs, and manuals are
|
|
|
+available from http://store.digilentinc.com/zybo-zynq-7000-arm-fpga-soc-trainer-board/ .
|
|
|
+
|
|
|
+If you want a custom FPGA bitstream to be loaded by U-Boot, copy it as
|
|
|
+system.bit in board/digilent/zybo/.
|
|
|
+
|
|
|
+Steps to create a working system for Zybo:
|
|
|
+
|
|
|
+1) make zynq_zybo_defconfig
|
|
|
+2) make
|
|
|
+3) write your SD Card with the sdcard.img file using dd by doing
|
|
|
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
+4) insert the SD Card and power up your Zybo
|
|
|
+5) Expect serial console on the second USB serial port exposed by the board
|
|
|
+
|
|
|
+The expected output:
|
|
|
+
|
|
|
+ U-Boot SPL 2016.05 (May 20 2016 - 16:16:24)
|
|
|
+ mmc boot
|
|
|
+ Trying to boot from MMC1
|
|
|
+ reading system.dtb
|
|
|
+ spl_load_image_fat_os: error reading image system.dtb, err - -1
|
|
|
+ reading u-boot-dtb.img
|
|
|
+ reading u-boot-dtb.img
|
|
|
+
|
|
|
+
|
|
|
+ U-Boot 2016.05 (May 20 2016 - 16:16:24 +0200)
|
|
|
+
|
|
|
+ Model: Zynq ZYBO Development Board
|
|
|
+ Board: Xilinx Zynq
|
|
|
+ I2C: ready
|
|
|
+ DRAM: ECC disabled 512 MiB
|
|
|
+ MMC: sdhci@e0100000: 0
|
|
|
+ SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
|
|
|
+ In: serial@e0001000
|
|
|
+ Out: serial@e0001000
|
|
|
+ Err: serial@e0001000
|
|
|
+ Model: Zynq ZYBO Development Board
|
|
|
+ Board: Xilinx Zynq
|
|
|
+ Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
|
|
|
+ I2C EEPROM MAC address read failed
|
|
|
+
|
|
|
+ Warning: ethernet@e000b000 (eth0) using random MAC address - 56:64:dd:a7:6d:94
|
|
|
+ eth0: ethernet@e000b000
|
|
|
+ ...
|
|
|
+
|
|
|
+Resulting system
|
|
|
+----------------
|
|
|
+Once the build process is finished you will have an image called "sdcard.img"
|
|
|
+in the output/images/ directory.
|
|
|
+
|
|
|
+The first partition is a FAT32 partition created at the beginning of the SD Card
|
|
|
+that contains the following files :
|
|
|
+ /BOOT.BIN
|
|
|
+ /zynq-zybo.dtb
|
|
|
+ /uEnv.txt
|
|
|
+ /system.bit
|
|
|
+ /uImage
|
|
|
+ /u-boot-dtb.img
|
|
|
+
|
|
|
+The second partition is an ext4 partition that contains the root filesystem.
|
|
|
+
|
|
|
+You can alter the booting procedure by modifying the uEnv.txt file
|
|
|
+in first partition of the SD card. It is a plain text file in format
|
|
|
+<key>=<value> one per line:
|
|
|
+
|
|
|
+kernel_image=myimage
|
|
|
+modeboot=myboot
|
|
|
+myboot=...
|