|
@@ -8,8 +8,8 @@ These instructions apply to all models of the ARM Juno:
|
|
|
- Juno r1 (supports PCIe)
|
|
|
- Juno r2 (Big Cluster with A72)
|
|
|
|
|
|
-Buildroot will generate the kernel image, device tree blob and a
|
|
|
-minimal root filesystem.
|
|
|
+Buildroot will generate the kernel image, device tree blob, bootloader binaries
|
|
|
+and a minimal root filesystem.
|
|
|
|
|
|
How to build it
|
|
|
===============
|
|
@@ -44,6 +44,20 @@ After building, you should obtain this tree:
|
|
|
+-- juno-r1.dtb (if Juno r1 is used)
|
|
|
+-- juno-r2.dtb (if Juno r2 is used)
|
|
|
+-- Image
|
|
|
+ +-- bl1.bin
|
|
|
+ +-- bl2.bin
|
|
|
+ +-- bl2u.bin
|
|
|
+ +-- bl31.bin
|
|
|
+ +-- fip.bin
|
|
|
+ +-- scp-fw.bin
|
|
|
+ +-- u-boot.bin
|
|
|
+
|
|
|
+Preparing your rootfs
|
|
|
+======================
|
|
|
+
|
|
|
+Format your pen drive as a ext3 filesystem by executing:
|
|
|
+
|
|
|
+ $ mkfs.ext3 /dev/<your device>
|
|
|
|
|
|
Preparing your rootfs
|
|
|
======================
|
|
@@ -113,7 +127,8 @@ Installing kernel image and DTB
|
|
|
3. Open the software/ folder
|
|
|
4. Copy the 'Image' file to software/
|
|
|
5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
|
|
|
-6. Press the red button in the front pannel of ARM Juno
|
|
|
+6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
|
|
|
+7. Press the red button in the front pannel of ARM Juno
|
|
|
|
|
|
At this time, the board will erase the Flash entry for each new item and
|
|
|
replace it with the lastest ones.
|