Michel-FK be783f545a remove u-boot config from FunKey | 3 роки тому | |
---|---|---|
FunKey | 3 роки тому | |
Recovery | 3 роки тому | |
buildroot @ d8082db677 | 3 роки тому | |
docker | 3 роки тому | |
.gitignore | 3 роки тому | |
.gitmodules | 4 роки тому | |
Makefile | 3 роки тому | |
README.md | 3 роки тому | |
genimage.cfg | 3 роки тому |
This directory contains a buildroot-based external configuration for building the FunKey.
Clone the FunKey OS repository from Github:
$ git clone https://github.com/FunKey-Project/FunKey-OS.git
Then enter into the created directory:
$ cd
Note: you will need to have access to the network, since buildroot will download the packages’ sources.
You may now build your FunKey with:
$ make
(This may take a while, consider getting yourself a coffee ;-) )
After building, you should obtain this tree:
images/
+-- FunKey-rootfs-X.Y.fwu
`-- sdcard.img
Once the build process is finished you will have an image called «sdcard.img» in the images/ directory.
Copy the bootable «sdcard.img» onto an SD card with «dd»:
$ sudo dd if=/images/sdcard.img of=/dev/sdX
Alternatively, you can use the Etcher graphical tool to burn the image to the SD card safely and on any platform:
Once the SD card is burned, insert it into your FunKey board, and power it up. Your new system should come up now and start a console on the UART0 serial port.