Bindings for the Cadence Xtensa Remote Processing driver. Required properties: - compatible: shall be "cdns,xrp". - reg: register locations of the DSP MMIO block, DSP communication area and DSP shared memory area. Optional properties: - queue-priority: cells indicating priorities of DSP hardware queues. If missing then single default queue is configured. - firmware-name: string identifying firmware name. If missing the driver doesn't load the firmware. - #address-cells: number of cells DSP physical address takes in the ranges. - #size-cells: number of cells each size takes in the ranges. - ranges: standard ranges property. Provides mapping of DSP physical addresses to host physical addresses. Arbitrary number of groups with the following structure: - cells with DSP physical address of the region; - cells with the corresponding host physical address of the region; - cells with the size of the region. XRP node may have an optional subnode when there's non-identity mapping set up in the ranges property. Both subnode and ranges property are required in order for the address translation to work. Example: xrp@0 { #address-cells = <1>; #size-cells = <1>; compatible = "cdns,xrp"; reg = <0xfd001000 0x00000200 /* DSP MMIO */ 0xf0000000 0x00001000 /* DSP communication area */ 0xf0001000 0x00fff000>; /* DSP shared memory */ firmware-name = "xrp0.elf"; ranges = <0x00000000 0x00000000 0x10000000 0x3ffc0000 0xc0000000 0x00020000 0x3ffe0000 0xc0020000 0x00020000 0x50000000 0x50000000 0x01000000 0x60000000 0x60000000 0x20000000 0xf0000000 0xf0000000 0x0d000000>; dsp@0 { }; };