12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * pdu001.h
- *
- * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- */
- #ifndef __CONFIG_PDU001_H
- #define __CONFIG_PDU001_H
- #include <configs/ti_am335x_common.h>
- /* Using 32K of volatile storage for environment */
- #define MACH_TYPE_PDU001 5075
- #define CONFIG_MACH_TYPE MACH_TYPE_PDU001
- #define CONFIG_BOARD_LATE_INIT
- /* Clock Defines */
- #define V_OSCK 24000000 /* Clock output from T2 */
- #define V_SCLK (V_OSCK)
- #if CONFIG_CONS_INDEX == 1
- #define CONSOLE_DEV "ttyO0"
- #elif CONFIG_CONS_INDEX == 2
- #define CONSOLE_DEV "ttyO1"
- #elif CONFIG_CONS_INDEX == 3
- #define CONSOLE_DEV "ttyO2"
- #elif CONFIG_CONS_INDEX == 4
- #define CONSOLE_DEV "ttyO3"
- #elif CONFIG_CONS_INDEX == 5
- #define CONSOLE_DEV "ttyO4"
- #elif CONFIG_CONS_INDEX == 6
- #define CONSOLE_DEV "ttyO5"
- #endif
- #define CONFIG_BOOTCOMMAND \
- "run eval_boot_device;" \
- "setenv bootargs console=${console} " \
- "vt.global_cursor_default=0 " \
- "root=/dev/mmcblk${mmc_boot}p${root_fs_partition} " \
- "rootfstype=ext4 " \
- "rootwait " \
- "rootdelay=1;" \
- "fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};" \
- "fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};" \
- "bootz ${loadaddr} - ${fdtaddr}"
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
- "fdtfile=am335x-pdu001.dtb\0" \
- "bootfile=zImage\0" \
- "console=" CONSOLE_DEV ",115200n8\0" \
- "root_fs_partition=2\0" \
- "eval_boot_device=" \
- "if test $boot_device = emmc; then " \
- "setenv mmc_boot 0;" \
- "elif test $boot_device = sdcard; then " \
- "setenv mmc_boot 1;" \
- "else " \
- "echo Bootdevice is neither MMC0 nor MMC1;" \
- "reset;" \
- "fi;" \
- "\0"
- #endif
- /* NS16550 Configuration */
- #define CONFIG_SYS_NS16550_COM1 UART0_BASE
- #define CONFIG_SYS_NS16550_COM2 UART1_BASE
- #define CONFIG_SYS_NS16550_COM3 UART2_BASE
- #define CONFIG_SYS_NS16550_COM4 UART3_BASE
- #define CONFIG_SYS_NS16550_COM5 UART4_BASE
- #define CONFIG_SYS_NS16550_COM6 UART5_BASE
- #define CONFIG_BAUDRATE 115200
- #endif /* ! __CONFIG_PDU001_H */
|