123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * Copyright (C) 2018 Collabora Ltd.
- *
- * Based on include/configs/xpress.h:
- * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
- */
- #ifndef __PCL063_H
- #define __PCL063_H
- #include <linux/sizes.h>
- #include "mx6_common.h"
- /* SPL options */
- #include "imx6_spl.h"
- /*
- * There is a bug in some i.MX6UL processors that results in the initial
- * portion of OCRAM being unavailable when booting from (at least) an SD
- * card.
- *
- * Tweak the SPL text base address to avoid this.
- */
- #define CONFIG_SYS_FSL_USDHC_NUM 1
- /* Size of malloc() pool */
- #define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
- /* Console configs */
- #define CONFIG_MXC_UART_BASE UART1_BASE
- /* MMC Configs */
- #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_MEMTEST_START 0x80000000
- #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000)
- #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
- #define CONFIG_SYS_HZ 1000
- /* Physical Memory Map */
- #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
- #define PHYS_SDRAM_SIZE SZ_256M
- #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
- #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
- #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
- #define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
- #define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
- /* NAND */
- #define CONFIG_SYS_MAX_NAND_DEVICE 1
- #define CONFIG_SYS_NAND_BASE 0x40000000
- /* USB Configs */
- #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
- #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
- #define CONFIG_MXC_USB_FLAGS 0
- #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
- #define CONFIG_IMX_THERMAL
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttymxc0,115200n8\0" \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "fdt_addr_r=0x82000000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x87100000\0" \
- "ramdisk_addr_r=0x82100000\0" \
- "scriptaddr=0x87000000\0" \
- BOOTENV
- #define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
- func(UBIFS, ubifs, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
- #include <config_distro_bootcmd.h>
- #endif /* __PCL063_H */
|