123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * Copyright (C) 2016 Stefan Roese <sr@denx.de>
- */
- #ifndef _CONFIG_MVEBU_ARMADA_8K_H
- #define _CONFIG_MVEBU_ARMADA_8K_H
- /*
- * High Level Configuration Options (easy to change)
- */
- #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
- /* additions for new ARM relocation support */
- #define CONFIG_SYS_SDRAM_BASE 0x00000000
- /* auto boot */
- #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
- 115200, 230400, 460800, 921600 }
- /*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
- #define CONFIG_INITRD_TAG /* enable INITRD tag */
- #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
- #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
- /*
- * Size of malloc() pool
- */
- #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
- /*
- * Other required minimal configurations
- */
- #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
- #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
- #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
- #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
- #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
- /* End of 16M scrubbed by training in bootrom */
- #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
- /* When runtime detection fails this is the default */
- #define CONFIG_SYS_MMC_ENV_DEV 0
- #define CONFIG_SYS_MAX_NAND_DEVICE 1
- #define CONFIG_SYS_NAND_MAX_CHIPS 1
- #define CONFIG_SYS_NAND_ONFI_DETECTION
- /*
- * Ethernet Driver configuration
- */
- #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
- #define CONFIG_ARP_TIMEOUT 200
- #define CONFIG_NET_RETRY_COUNT 50
- #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
- /* USB ethernet */
- /*
- * SATA/SCSI/AHCI configuration
- */
- #define CONFIG_SCSI_AHCI_PLAT
- #define CONFIG_LBA48
- #define CONFIG_SYS_64BIT_LBA
- #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
- #define CONFIG_SYS_SCSI_MAX_LUN 1
- #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
- /*
- * PCI configuration
- */
- #ifdef CONFIG_PCIE_DW_MVEBU
- #define CONFIG_E1000
- #endif
- #define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 0) \
- func(USB, usb, 0) \
- func(SCSI, scsi, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
- #include <config_distro_bootcmd.h>
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "scriptaddr=0x4d00000\0" \
- "pxefile_addr_r=0x4e00000\0" \
- "fdt_addr_r=0x4f00000\0" \
- "kernel_addr_r=0x5000000\0" \
- "ramdisk_addr_r=0x8000000\0" \
- "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
- BOOTENV
- #endif /* _CONFIG_MVEBU_ARMADA_8K_H */
|