123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
- *
- * Based on dockstar.h originally written by
- * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
- *
- * Based on sheevaplug.h originally written by
- * Prafulla Wadaskar <prafulla@marvell.com>
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- */
- #ifndef _CONFIG_GOFLEXHOME_H
- #define _CONFIG_GOFLEXHOME_H
- /*
- * High Level Configuration Options (easy to change)
- */
- #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
- #define CONFIG_KW88F6281 1 /* SOC Name */
- #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
- /*
- * Default GPIO configuration and LED status
- */
- #define GOFLEXHOME_OE_LOW (~(0))
- #define GOFLEXHOME_OE_HIGH (~(0))
- #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
- #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
- /* PHY related */
- #define MV88E1116_LED_FCTRL_REG 10
- #define MV88E1116_CPRSP_CR3_REG 21
- #define MV88E1116_MAC_CTRL_REG 21
- #define MV88E1116_PGADR_REG 22
- #define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
- #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
- /*
- * Commands configuration
- */
- /*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
- #include "mv-common.h"
- /*
- * Environment variables configurations
- */
- /*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
- /*
- * Default environment variables
- */
- #define CONFIG_BOOTCOMMAND \
- "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
- "ubi part root; " \
- "ubifsmount ubi:root; " \
- "ubifsload 0x800000 ${kernel}; " \
- "bootm 0x800000"
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "console=console=ttyS0,115200\0" \
- "mtdids=nand0=orion_nand\0" \
- "mtdparts="CONFIG_MTDPARTS_DEFAULT \
- "kernel=/boot/uImage\0" \
- "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
- /*
- * Ethernet Driver configuration
- */
- #ifdef CONFIG_CMD_NET
- #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
- #define CONFIG_PHY_BASE_ADR 0
- #endif /* CONFIG_CMD_NET */
- /*
- * * SATA Driver configuration
- * */
- #ifdef CONFIG_MVSATA_IDE
- #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
- #endif /*CONFIG_MVSATA_IDE*/
- #endif /* _CONFIG_GOFLEXHOME_H */
|