123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * Configuration for the flea3 board.
- */
- #ifndef __CONFIG_H
- #define __CONFIG_H
- #include <asm/arch/imx-regs.h>
- /* High Level Configuration Options */
- #define CONFIG_MX35
- #define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
- /* Set TEXT at the beginning of the NOR flash */
- /* This is required to setup the ESDC controller */
- #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
- #define CONFIG_REVISION_TAG
- #define CONFIG_SETUP_MEMORY_TAGS
- #define CONFIG_INITRD_TAG
- /*
- * Size of malloc() pool
- */
- #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
- /*
- * Hardware drivers
- */
- #define CONFIG_SYS_I2C
- #define CONFIG_SYS_I2C_MXC
- #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
- #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
- #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
- #define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */
- #define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe
- /*
- * UART (console)
- */
- #define CONFIG_MXC_UART
- #define CONFIG_MXC_UART_BASE UART3_BASE
- /* allow to overwrite serial and ethaddr */
- #define CONFIG_ENV_OVERWRITE
- /*
- * Command definition
- */
- #define CONFIG_NET_RETRY_COUNT 100
- #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
- /*
- * Ethernet on SOC (FEC)
- */
- #define CONFIG_FEC_MXC
- #define IMX_FEC_BASE FEC_BASE_ADDR
- #define CONFIG_FEC_MXC_PHYADDR 0x1
- #define CONFIG_ARP_TIMEOUT 200UL
- /*
- * Miscellaneous configurable options
- */
- #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
- /* Print Buffer Size */
- #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
- #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
- #define CONFIG_SYS_MEMTEST_END 0x10000
- #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
- /*
- * Physical Memory Map
- */
- #define PHYS_SDRAM_1 CSD0_BASE_ADDR
- #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
- #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
- #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
- #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2)
- #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
- #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
- /*
- * MTD Command for mtdparts
- */
- /*
- * FLASH and environment organization
- */
- #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
- #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
- /* Monitor at beginning of flash */
- #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
- #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
- /* Address and size of Redundant Environment Sector */
- /*
- * CFI FLASH driver setup
- */
- /* A non-standard buffered write algorithm */
- /*
- * NAND FLASH driver setup
- */
- #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
- #define CONFIG_SYS_MAX_NAND_DEVICE 1
- #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
- #define CONFIG_MXC_NAND_HWECC
- #define CONFIG_SYS_NAND_LARGEPAGE
- /*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
- #define CONFIG_HOSTNAME "flea3"
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip_sta=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
- "addip=if test -n ${ipdyn};then run addip_dyn;" \
- "else run addip_sta;fi\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addtty=setenv bootargs ${bootargs}" \
- " console=ttymxc2,${baudrate}\0" \
- "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
- "loadaddr=80800000\0" \
- "kernel_addr_r=80800000\0" \
- "hostname=" CONFIG_HOSTNAME "\0" \
- "bootfile=" CONFIG_HOSTNAME "/uImage\0" \
- "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0" \
- "flash_self=run ramargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr}\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
- "run nfsargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr_r}\0" \
- "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
- "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
- "net_self=if run net_self_load;then " \
- "run ramargs addip addtty addmtd addmisc;" \
- "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
- "else echo Images not loades;fi\0" \
- "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
- "load=tftp ${loadaddr} ${u-boot}\0" \
- "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
- "update=protect off ${uboot_addr} +80000;" \
- "erase ${uboot_addr} +80000;" \
- "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
- "upd=if run load;then echo Updating u-boot;if run update;" \
- "then echo U-Boot updated;" \
- "else echo Error updating u-boot !;" \
- "echo Board without bootloader !!;" \
- "fi;" \
- "else echo U-Boot not downloaded..exiting;fi\0" \
- "bootcmd=run net_nfs\0"
- #endif /* __CONFIG_H */
|