thead_admin 43db9e00d5 Linux_SDK_V0.9.5 преди 1 година
..
Kconfig 43db9e00d5 Linux_SDK_V0.9.5 преди 1 година
MAINTAINERS 43db9e00d5 Linux_SDK_V0.9.5 преди 1 година
Makefile 43db9e00d5 Linux_SDK_V0.9.5 преди 1 година
README 43db9e00d5 Linux_SDK_V0.9.5 преди 1 година
pcm058.c 43db9e00d5 Linux_SDK_V0.9.5 преди 1 година

README

Board information
-----------------

The SBC produced by Phytec has a SOM based on a i.MX6Q.
The SOM is sold in two versions, with eMMC or with NAND. Support
here is for the SOM with NAND.
The evaluation board "phyBoard-Mira" is thought to be used
together with the SOM.

More information on the board can be found on manufacturer's
website:

http://www.phytec.de/produkt/single-board-computer/phyboard-mira/
http://www.phytec.de/fileadmin/user_upload/images/content/1.Products/SOMs/phyCORE-i.MX6/L-808e_1.pdf

Building U-Boot
-------------------------------

$ make pcm058_defconfig
$ make

This generates the artifacts SPL and u-boot.img.
The SOM can boot from NAND or from SD-Card, having the SPI-NOR
as second option.
The dip switch "DIP-1" on the board let choose between
NAND and SD.

DIP-1 set to off: Boot first from NAND, then try SPI
DIP-1 set to on: Boot first from SD, then try SPI

The bootloader was tested with DIP-1 set to on. If a SD-card
is present, then the RBL tries to load SPL from the SD Card, if not,
RBL loads from SPI-NOR. The SPL tries then to load from the same
device where SPL was loaded (SD or SPI). Booting from NAND is
not supported.