123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990 |
- /* SPDX-License-Identifier: GPL-2.0+ */
- /*
- * (C) Copyright 2009
- * Net Insight <www.netinsight.net>
- * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
- *
- * Based on sheevaplug.h:
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- */
- #ifndef _CONFIG_OPENRD_H
- #define _CONFIG_OPENRD_H
- /*
- * High Level Configuration Options (easy to change)
- */
- #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
- #define CONFIG_KW88F6281 1 /* SOC Name */
- #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
- /*
- * Commands configuration
- */
- /*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
- #include "mv-common.h"
- /*
- * Environment variables configurations
- */
- /*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
- /*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
- #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
- /*
- * Default environment variables
- */
- #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
- "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
- "${x_bootcmd_usb}; bootm 0x6400000;"
- #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \
- CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
- "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
- "x_bootcmd_usb=usb start\0" \
- "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
- /*
- * Ethernet Driver configuration
- */
- #ifdef CONFIG_CMD_NET
- # ifdef CONFIG_BOARD_IS_OPENRD_BASE
- # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
- # else
- # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
- # endif
- # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
- # define CONFIG_PHY_BASE_ADR 0x0
- # define PHY_NO "88E1121"
- # else
- # define CONFIG_PHY_BASE_ADR 0x8
- # define PHY_NO "88E1116"
- # endif
- #endif /* CONFIG_CMD_NET */
- /*
- * SATA Driver configuration
- */
- #ifdef CONFIG_MVSATA_IDE
- #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
- #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
- #endif /*CONFIG_MVSATA_IDE*/
- #ifdef CONFIG_CMD_MMC
- #define CONFIG_MVEBU_MMC
- #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
- #endif /* CONFIG_CMD_MMC */
- #endif /* _CONFIG_OPENRD_BASE_H */
|