|
@@ -0,0 +1,173 @@
|
|
|
+; This is a sample ~/.gammurc file.
|
|
|
+; In Unix/Linux copy it into your home directory and name it .gammurc
|
|
|
+; or into /etc and name it gammurc
|
|
|
+; In Win32 copy it into directory with Gammu.exe and name gammurc
|
|
|
+; More about parameters later
|
|
|
+; Anything behind ; or # is comment.
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+
|
|
|
+[gammu]
|
|
|
+
|
|
|
+device = /dev/ttyUSB0
|
|
|
+connection = at115200
|
|
|
+; Do not use model configuration unless you really need it
|
|
|
+;model = 6110
|
|
|
+;synchronizetime = yes
|
|
|
+;logfile = gammulog
|
|
|
+;logformat = textall
|
|
|
+;use_locking = yes
|
|
|
+;gammuloc = locfile
|
|
|
+;startinfo = yes
|
|
|
+;gammucoding = utf8
|
|
|
+;usephonedb = yes
|
|
|
+
|
|
|
+;[gammu1]
|
|
|
+
|
|
|
+;device = com8:
|
|
|
+;model = 6110
|
|
|
+;connection = fbusblue
|
|
|
+;synchronizetime = yes
|
|
|
+;logfile = gammulog
|
|
|
+;logformat = textall
|
|
|
+;use_locking = yes
|
|
|
+;gammuloc = locfile
|
|
|
+;startinfo = yes
|
|
|
+;gammucoding = utf8
|
|
|
+
|
|
|
+; Step 1. Please find required Connection parameter and look into assigned
|
|
|
+; with it device type. With some Connection you must set concrete model
|
|
|
+
|
|
|
+; ================================================================ cables =====
|
|
|
+; New Nokia protocol for FBUS/DAU9P
|
|
|
+; Connection "fbus", device type serial
|
|
|
+; New Nokia protocol for DLR3/DLR3P
|
|
|
+; Connection "fbusdlr3"/"dlr3", device type serial
|
|
|
+; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard
|
|
|
+; like 6230)
|
|
|
+; Connection "dku2phonet"/"dku2", device type dku2 on Windows
|
|
|
+; Connection "fbususb" on Linux
|
|
|
+; New Nokia protocol for DKU5 (and phone without USB converter on phone
|
|
|
+; mainboard like 5100)
|
|
|
+; Connection "dku5fbus"/"dku5", device type dku5
|
|
|
+; New Nokia protocol for PL2303 USB cable (and phone without USB converter
|
|
|
+; on phone mainboard like 5100)
|
|
|
+; Connection "fbuspl2303", device type usb
|
|
|
+; Old Nokia protocol for MBUS/DAU9P
|
|
|
+; Connection "mbus", device type serial
|
|
|
+; Variants:
|
|
|
+; You can modify a bit behaviour of connection using additional flags
|
|
|
+; specified just after connection name like connection-variant.
|
|
|
+; If you're using ARK3116 cable (or any other which does not like dtr
|
|
|
+; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr.
|
|
|
+; If cable you use is not powered over DTR/RTS, try using -nopower variant of
|
|
|
+; connection, eg. fbus-nopower.
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None
|
|
|
+; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc.
|
|
|
+; Connection "at19200"/"at115200"/.., device type serial
|
|
|
+; AT commands for DKU2 cable
|
|
|
+; Connection "dku2at", device type dku2
|
|
|
+; ============================================================== infrared =====
|
|
|
+; Nokia protocol for infrared with Nokia 6110/6130/6150
|
|
|
+; Connection "fbusirda"/"infrared", device type serial
|
|
|
+; Nokia protocol for infrared with other Nokia models
|
|
|
+; Connection "irdaphonet"/"irda", device type irda
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc.
|
|
|
+; Connection "irdaat", device type irda
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; OBEX for infrared
|
|
|
+; Connection "irdaobex", device type irda.
|
|
|
+; ============================================================= Bluetooth =====
|
|
|
+; Nokia protocol with serial device set in BT stack (WidComm, other) from
|
|
|
+; adequate service and Nokia 6210
|
|
|
+; Connection "fbusblue", device type serial
|
|
|
+; Nokia protocol with serial device set in BT stack (WidComm, other) from
|
|
|
+; adequate service and other Nokia models
|
|
|
+; Connection "phonetblue", device type serial
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; Nokia protocol for Bluetooth stack with Nokia 6210
|
|
|
+; Connection "bluerffbus", device type BT
|
|
|
+; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform
|
|
|
+; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..)
|
|
|
+; Connection "bluerfphonet", device type BT
|
|
|
+; Nokia protocol for Bluetooth stack with other DCT4 Nokia models
|
|
|
+; Connection "bluephonet", device type BT
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't
|
|
|
+; inform about BT services correctly (6310, 6310i with firmware lower
|
|
|
+; than 5.50, 8910,..)
|
|
|
+; Connection "bluerfat", device type BT
|
|
|
+; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.)
|
|
|
+; Connection "blueat", device type BT
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about
|
|
|
+; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...)
|
|
|
+; Connection "bluerfobex", device type BT
|
|
|
+; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.)
|
|
|
+; Connection "blueobex", device type BT.
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; Connection "bluerfgnapbus", device type BT, model "gnap"
|
|
|
+; Connection "irdagnapbus", device type irda, model "gnap"
|
|
|
+
|
|
|
+; Step2. According to device type from Step1 and used OS set Port parameter
|
|
|
+
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
|
|
|
+; ----------|---------------------------------|--------------------------------
|
|
|
+; serial | "com*:" | "/dev/ttyS*"
|
|
|
+; | (example "com1:") | (example "/dev/ttyS1")
|
|
|
+; | | or "/dev/tts/**" (with DevFS)
|
|
|
+; | | virtual serial ports like
|
|
|
+; | | "/dev/ircomm*" or "/dev/rfcomm*"
|
|
|
+; ----------|---------------------------------|--------------------------------
|
|
|
+; irda | ignored (can be empty) | ignored (can be empty)
|
|
|
+; ----------|---------------------------------|--------------------------------
|
|
|
+; BT | Bluetooth device address (example "00:11:22:33:44:55").
|
|
|
+; | Optionally you can also include channel after slash
|
|
|
+; | (example "00:11:22:33:44:55/12"). Can be also empty.
|
|
|
+; ----------|---------------------------------|--------------------------------
|
|
|
+; dku2 | ignored (can be empty) | /dev/ttyUSB* or /dev/ttyACM*
|
|
|
+; ----------|---------------------------------|--------------------------------
|
|
|
+; dku5 | ignored (can be empty) | connection with it not possible
|
|
|
+; ----------|---------------------------------|--------------------------------
|
|
|
+; usb | connection with it not possible | "/dev/ttyUSB*"
|
|
|
+
|
|
|
+; Step3. Set other config parameters
|
|
|
+
|
|
|
+; -----------------------------------------------------------------------------
|
|
|
+; Parameter name | Description
|
|
|
+; ----------------|------------------------------------------------------------
|
|
|
+; Model | Should not be used unless you have a good reason to do so.
|
|
|
+; | If Gammu doesn't recognize your phone model, put it here.
|
|
|
+; | Example values: "6110", "6150", "6210", "8210"
|
|
|
+; SynchronizeTime | if you want to set time from computer to phone during
|
|
|
+; | starting connection. Do not rather use this option when
|
|
|
+; | when to reset phone during connection (in some phones need
|
|
|
+; | to set time again after restart)
|
|
|
+; GammuLoc | name of localisation file
|
|
|
+; StartInfo | this option allow to set, that you want (setting "yes")
|
|
|
+; | to see message on the phone screen or phone should enable
|
|
|
+; | light for a moment during starting connection. Phone
|
|
|
+; | WON'T beep during starting connection with this option.
|
|
|
+; GammuCoding | forces using specified codepage (in win32 - for example
|
|
|
+; | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
|
|
|
+; ----------------|------------------------------------------------------------
|
|
|
+; Logfile | Use, when want to have logfile from communication.
|
|
|
+; Logformat | What debug info and format should be used:
|
|
|
+; | "nothing" - no debug level (default)
|
|
|
+; | "text" - transmission dump in text format
|
|
|
+; | "textall" - all possible info in text format
|
|
|
+; | "errors" - errors in text format
|
|
|
+; | "binary" - transmission dump in binary format
|
|
|
+; ----------------|------------------------------------------------------------
|
|
|
+; Features | Custom features for phone. This can be used as override
|
|
|
+; | when values coded in common/gsmphones.c are bad or
|
|
|
+; | missing. Consult include/gammu-info.h for possible values
|
|
|
+; | (all Feature values without leading F_ prefix).
|
|
|
+; | Please report correct values to Gammu authors.
|
|
|
+; ----------------|------------------------------------------------------------
|
|
|
+; Use_Locking | under Unix/Linux use "yes", if want to lock used device
|
|
|
+; | to prevent using it by other applications. In win32 ignored
|
|
|
+
|
|
|
+; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us
|