XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 21:56:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 21:59:35] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 09:54:31] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 10:18:14] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 10:23:39] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 11:37:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 13:43:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 14:06:00] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 14:21:14] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 14:50:30] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 15:17:16] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 15:30:25] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 Error receiving data: ?????¡Â?¨²??????¡À??????????????????? Error: [ Target not in DEBUGGED state (RUNNING)!] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 16:01:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 16:15:31] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 16:19:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f73,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000995a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 16:21:56] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 17:25:07] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 17:44:33] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 19:18:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 19:49:11] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 19:53:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80005465, epcdbg:80005462 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 20:08:45] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 20:27:57] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 20:47:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-08 21:00:48] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x80009931, epcdbg:8000992e Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80009931, epcdbg:8000992e Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 10:03:22] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 11:17:29] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 12:56:16] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 13:09:52] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 13:28:35] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 13:51:18] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 15:59:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 16:23:12] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 17:19:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80006690,2' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 17:50:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 17:55:18] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 18:09:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 19:15:27] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 ERROR: Capture IR failed. Total IR bits : 0 WARNING: Chain Controller0: Bypass DR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0: Capture IR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0, Tap TAP0: IR Width differs, Topology sets 5, Capture IR got 0 WARNING: Examining scan chain failed! Warning: Failed to check IR (0x1f) Warning: Custom IDCODE ignored as different IDCODE is detected (custom: 0x20a43001)! Error: Unknown JTAG IDCODE (0xffffffff) - can't proceed! Error: XDM initialization failed ERROR: Couldn't initialize, exit... XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 19:17:14] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 19:29:41] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 19:30:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 20:05:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 20:18:45] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 20:25:51] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 20:41:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 20:56:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-09 21:29:09] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-10 11:50:27] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-10 13:25:21] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-10 13:49:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-10 14:07:01] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-11 15:18:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-11 15:19:30] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80008983, epcdbg:80008980 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-11 15:58:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Lost control over the target [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-11 16:50:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-11 16:56:02] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80004c90, epcdbg:80004c8d [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-11 19:22:25] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c13,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800086b2,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 00:07:36] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 00:12:56] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c13,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800086b2,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000000,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000004,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000008,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm9000000c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000010,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000020,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000030,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000050,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000054,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000058,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm9000005c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000060,10' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 00:44:00] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Overrun detected! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 00:57:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 09:47:49] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 09:54:05] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 10:32:22] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 10:44:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 14:13:01] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 17:05:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 17:13:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 17:26:33] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80005da0, epcdbg:80005d9d [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 17:44:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 17:56:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 21:54:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 22:14:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 23:43:30] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-12 23:47:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 00:47:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 19:08:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 19:19:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005de8, epcdbg:80005de5 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 19:43:27] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 20:05:05] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver ERROR: Capture IR failed. Total IR bits : 0 WARNING: Chain Controller0: Bypass DR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0: Capture IR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0, Tap TAP0: IR Width differs, Topology sets 5, Capture IR got 0 WARNING: Examining scan chain failed! Warning: Failed to check IR (0x1f) Warning: Custom IDCODE ignored as different IDCODE is detected (custom: 0x20a43001)! Error: Unknown JTAG IDCODE (0xffffffff) - can't proceed! Error: XDM initialization failed ERROR: Couldn't initialize, exit... XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 20:05:39] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver ERROR: Capture IR failed. Total IR bits : 0 WARNING: Chain Controller0: Bypass DR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0: Capture IR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0, Tap TAP0: IR Width differs, Topology sets 5, Capture IR got 0 WARNING: Examining scan chain failed! Warning: Failed to check IR (0x1f) Warning: Custom IDCODE ignored as different IDCODE is detected (custom: 0x20a43001)! Error: Unknown JTAG IDCODE (0xffffffff) - can't proceed! Error: XDM initialization failed ERROR: Couldn't initialize, exit... XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 20:06:19] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 20:38:02] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-13 20:56:26] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 00:06:21] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c53,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008752,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000f418,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80012c24,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80012e1c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80012e10,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 10:05:22] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 10:29:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 10:34:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80005e40, epcdbg:80005e3d [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 10:41:59] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 11:31:52] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 13:34:28] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 13:40:23] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 14:10:56] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 15:06:39] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 15:18:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 15:22:35] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80010608,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8001470c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050934,4' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 15:32:01] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050934,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80010608,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8001470c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target ^done,msg="Socket connected" XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 16:03:36] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8001470c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80010608,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050934,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 16:26:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8001470c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80010608,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050934,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 16:54:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80010608,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8001470c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050934,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 17:08:12] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8001470c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050934,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80010608,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 17:34:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 20:56:23] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 21:13:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004f33,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008b32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80050988,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-14 21:31:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 11:34:41] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c93,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008872,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 14:39:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 16:10:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005b4e, epcdbg:80005b4b [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c93,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005066,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008872,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 16:21:59] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005b4e, epcdbg:80005b4b XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 16:53:35] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005b4e, epcdbg:80005b4b Error: Lost control over the target [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 16:58:48] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 17:12:09] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005c37,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800076df,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c530,2' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 17:31:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005c37,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c530,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 19:23:14] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 19:24:06] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 19:34:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000572f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000bc88,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3c000fc,1' failed! Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 23:53:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-15 23:56:00] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-16 00:05:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000572f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000bc88,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000be52,2' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-16 11:17:49] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,10' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,f' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,e' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,d' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,c' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,b' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,a' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,9' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,8' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,7' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,6' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,5' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,3' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,2' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1100, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x1104, epc:0x80014be8, epcdbg:80014be5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm1107,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-16 11:30:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000572f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000bca8,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000be72,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 14:39:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 14:43:18] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000bb3a, epcdbg:8000bb37 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 14:45:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000bb4c, epcdbg:8000bb49 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005bbf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4c0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c63a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 15:28:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005bbf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4c0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c63a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 15:42:09] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005bbf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4c0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c63a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 15:51:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 15:52:52] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x8000c92b, epcdbg:8000c928 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005bbf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4c0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 16:18:20] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x80005c89, epcdbg:80005c86 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,4' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x80005c92, epcdbg:80005c8f Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 16:53:26] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005c8c, epcdbg:80005c89 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-17 16:56:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005c7c, epcdbg:80005c79 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005baf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4b0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80016b24,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80016d24,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800060dc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80013328,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80016d18,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: DSR is invalid (0)! Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-20 11:30:01] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005baf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4b0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-20 14:24:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005baf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005dfd,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4b0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005dfd,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005c5c,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-20 14:54:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005baf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4b0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80016d14,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80016d14,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80016d2c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80016d2c,4' failed! Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 09:38:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x140201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 10:38:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 10:44:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 11:19:30] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 11:54:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 12:05:40] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 12:16:57] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x8000b092, epcdbg:8000b08f [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 12:19:23] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005baf,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000c4b0,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 18:04:58] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 18:06:25] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 18:07:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x80003599, epcdbg:80003596 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 20:38:05] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-26 21:22:41] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 15:44:08] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000587b,2' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 15:58:36] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 16:14:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: DSR is invalid (0)! Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: DSR is invalid (0)! Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 21:25:19] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Error: Unknown processor (configID1:0)! Error: XDM initialization failed ERROR: Couldn't initialize, exit... XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 21:45:25] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Error: Unknown processor (configID1:0)! Error: XDM initialization failed ERROR: Couldn't initialize, exit... XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 21:47:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 21:49:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 23:56:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-27 23:57:19] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-28 00:00:58] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x42113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-28 00:09:42] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-28 10:08:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-28 11:07:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-28 13:57:26] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-28 14:27:45] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-28 14:31:08] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 Connected to Jlink Device: Name:'J-Link V11 compiled Oct 5 2020 14:56:48' S/N:261008488 Firmware: J-Link V11 compiled Oct 5 2020 14:56:48 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x700056f2, epcdbg:700056ef [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-09-01 13:48:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261008488 ERROR: Failed to access device ! ERROR: Error starting probe driver for chain "Controller0"