XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-04-29 13:41:08] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80006336, epcdbg:80006333 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: DSR is invalid (0)! Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! Error: DSR is invalid (0)! ERROR: [Error attaching to target!] Warning: Target not under control. No status update performed Error: Couldn't interrupt core! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-04-29 19:54:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80006e60,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3a200fc,1' failed! Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-04-29 20:16:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-04-29 20:33:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-04-29 21:14:31] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80006e60,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800109c0,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000014,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000014,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000014,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm81900a40,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm81900a44,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800109c4,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000020,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000020,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000020,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800107d8,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000d058,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180000,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180001,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180002,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180004,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180006,2' failed! Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-04-30 10:21:45] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-04-30 11:26:00] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 traxapp: listening on port 11444 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-01 10:12:05] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-01 10:59:33] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-01 11:05:26] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-01 11:24:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' traxapp: listening on port 11444 Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x800033ad, epcdbg:800033aa [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-01 11:39:49] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-06 10:13:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 5000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-26 17:09:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-26 17:34:52] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000776e, epcdbg:8000776b Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-26 17:39:12] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-26 18:44:56] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-26 18:48:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80003b53, epcdbg:80003b50 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 00:06:47] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm81902600,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm81902604,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000ea68,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 09:33:07] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 09:44:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80004463, epcdbg:80004460 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 10:08:10] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 11:56:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 12:19:10] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80007caa, epcdbg:80007ca7 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error receiving data: ?????¡Â?¨²??????¡À??????????????????? XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 13:05:21] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80004e25, epcdbg:80004e22 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 13:41:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 13:45:51] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80004e35, epcdbg:80004e32 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 14:14:58] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 14:32:10] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80004ff1, epcdbg:80004fee XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 14:38:13] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x80008080, epcdbg:8000807d Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 14:44:23] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 14:55:52] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x80010a68, epcdbg:80010a65 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x10201, excvaddr:0x0, epc:0x80010a68, epcdbg:80010a65 Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 15:22:49] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe0, epc:0x3, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe0,10' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 15:28:33] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 17:44:27] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 17:52:11] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 ^done,msg="Socket connected" XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 18:09:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 19:14:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80004e2f, epcdbg:80004e2c XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 19:28:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 19:46:56] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 20:12:25] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 20:26:23] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 20:48:51] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-27 23:48:27] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 00:06:22] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80004e1f, epcdbg:80004e1c Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 00:14:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 00:23:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 10:10:57] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 10:41:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80004496, epcdbg:80004493 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 11:17:09] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 14:05:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 14:24:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-28 14:29:58] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 10:41:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 10:50:02] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x800046be, epcdbg:800046bb [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 10:56:49] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80007e6a, epcdbg:80007e67 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80007f7d, epcdbg:80007f7a XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 11:10:19] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80007f65, epcdbg:80007f62 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80007f7d, epcdbg:80007f7a XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 11:12:58] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80007e6a, epcdbg:80007e67 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 11:18:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80007f7d, epcdbg:80007f7a XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 11:24:30] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80007f77, epcdbg:80007f74 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 11:28:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 11:39:02] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 12:38:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-05-31 12:53:25] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80010c88, epcdbg:80010c85 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80010c88, epcdbg:80010c85 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80010c88, epcdbg:80010c85 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:17:05] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x10201, excvaddr:0x69e27902, epc:0xac30, epcdbg:ac2d [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x1c2113, excvaddr:0xffffffe0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe3,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x1c2113, excvaddr:0xffffffe0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe3,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x1c2113, excvaddr:0xffffffe0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe3,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x1c2113, excvaddr:0xffffffe0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe3,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:19:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x1c0201, excvaddr:0x8fd500e6, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x1c2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x1c2107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:25:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x10201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80003d3a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000550e,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm81902bc4,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm81902bc0,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'md00fc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a48,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a49,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a4a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a4c,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a4e,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a50,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me01809d0,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me01809d1,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me01809d2,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me01809d4,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me01809d6,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me01809d8,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a58,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a5a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a5c,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a5e,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a60,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a62,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me0180a68,8' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:31:10] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:37:39] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80004145, epcdbg:80004142 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:40:52] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:53:45] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 15:56:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:04:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:10:39] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005463, epcdbg:80005460 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:15:21] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:19:07] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:27:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x800082ae, epcdbg:800082ab [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:29:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80005447, epcdbg:80005444 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:33:29] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:35:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-01 16:43:18] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-07 21:06:40] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-07 21:10:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80004a0a, epcdbg:80004a07 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-07 23:23:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,8' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0xf8, epc:0x80011bb8, epcdbg:80011bb5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mf9,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-07 23:50:48] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000460e,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005df2,2' failed! Error: Target not in OCD Mode. Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 11:12:10] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 11:14:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80008ca6, epcdbg:80008ca3 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 11:17:59] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x8000418b, epcdbg:80004188 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 11:22:42] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 11:34:29] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80008c9f, epcdbg:80008c9c [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 11:36:49] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80008c4f, epcdbg:80008c4c [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000437f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004696,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80005e7a,2' failed! Error: Target not in OCD Mode. Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Error: [ Target not in DEBUGGED state (INVALID)!] Warning: Target not under control. No status update performed XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 13:58:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 14:10:48] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80008c72, epcdbg:80008c6f [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 14:15:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 14:19:29] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 14:41:19] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver ERROR: Capture IR failed. Total IR bits : 0 WARNING: Chain Controller0: Bypass DR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0: Capture IR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0, Tap TAP0: IR Width differs, Topology sets 5, Capture IR got 0 WARNING: Examining scan chain failed! Warning: Failed to check IR (0x1f) Warning: Custom IDCODE ignored as different IDCODE is detected (custom: 0x20a43001)! Error: Unknown JTAG IDCODE (0xffffffff) - can't proceed! Error: XDM initialization failed ERROR: Couldn't initialize, exit... XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 14:42:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 17:02:41] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000453b, epcdbg:80004538 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 17:39:18] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000437b, epcdbg:80004378 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 17:48:45] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 18:06:35] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 18:33:10] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,10' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,f' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,e' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,d' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,c' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,b' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,a' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,9' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,8' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,7' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,6' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,5' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,4' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,3' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,2' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011078, epcdbg:80011075 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 18:44:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x152107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x150201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 22:16:35] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error receiving data: ?????¡Â?¨²??????¡À??????????????????? XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 22:31:36] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error receiving data: ?????¡Â?¨²??????¡À??????????????????? XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 23:04:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error receiving data: ?????¡Â?¨²??????¡À??????????????????? XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 23:13:19] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error receiving data: ?????¡Â?¨²??????¡À??????????????????? XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 23:17:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x4, epc:0x8000432c, epcdbg:80004329 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm4,4' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x4, epc:0x8000432c, epcdbg:80004329 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm4,4' failed! Error receiving data: ?????¡Â?¨²??????¡À??????????????????? XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 23:21:07] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x8000432f, epcdbg:8000432c [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80003df0, epcdbg:80003ded XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 23:43:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000432c, epcdbg:80004329 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-08 23:52:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80004328, epcdbg:80004325 Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 14:28:42] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 15:57:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80004c30, epcdbg:80004c2d XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 16:11:30] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80004b18, epcdbg:80004b15 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 16:16:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80004280, epcdbg:8000427d XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 17:34:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80004252, epcdbg:8000424f XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 17:55:23] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x800056b5, epcdbg:800056b2 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 19:16:07] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x800056b5, epcdbg:800056b2 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 19:51:05] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80004949, epcdbg:80004946 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 19:54:48] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80004949, epcdbg:80004946 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 20:07:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80004929, epcdbg:80004926 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 20:58:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x800048d9, epcdbg:800048d6 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 21:03:07] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000483c, epcdbg:80004839 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 21:13:30] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x80004836, epcdbg:80004833 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000480d,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80012810,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800125fc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80012844,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000ee08,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80012840,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 23:06:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-09 23:55:27] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-10 00:02:18] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000482f, epcdbg:8000482c [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-10 00:05:10] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x8000482c, epcdbg:80004829 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-10 10:20:16] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-06-10 10:25:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x800045af, epcdbg:800045ac [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x800048ba, epcdbg:800048b7 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 11:11:47] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x20201, excvaddr:0x0, epc:0x80004878, epcdbg:80004875 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 14:54:57] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x20201, excvaddr:0x0, epc:0x80004878, epcdbg:80004875 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 15:35:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000494e, epcdbg:8000494b [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x80004691, epcdbg:8000468e Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x8000478d, epcdbg:8000478a Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x50200, epc:0x80011068, epcdbg:80011065 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm50201,2' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x50200, epc:0x80011068, epcdbg:80011065 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm50201,2' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 15:46:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 15:48:31] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x10201, excvaddr:0x0, epc:0x80004954, epcdbg:80004951 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 15:56:22] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x10201, excvaddr:0x0, epc:0x80004974, epcdbg:80004971 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 16:01:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x10201, excvaddr:0x0, epc:0x80004971, epcdbg:8000496e [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-01 16:36:09] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000496c, epcdbg:80004969 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004328,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004340,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800045d3,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800049cb,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000f008,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800129dc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800127e4,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800129d0,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 11:27:00] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 14:37:01] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00c0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm3bb00fc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 15:21:01] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 15:40:21] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000496c, epcdbg:80004969 Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 15:45:45] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 18:03:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x8000496c, epcdbg:80004969 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800049a7,2' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 19:31:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x8fffec0, epc:0x80004226, epcdbg:80004223 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8fffec0,300' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2107, excvaddr:0x8fffec0, epc:0x80004226, epcdbg:80004223 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8fffec0,300' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x8fffec0, epc:0x80004a26, epcdbg:80004a23 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8fffec0,300' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004201,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800049a7,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8fffec0,300' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004350,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019ead0,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019ead1,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019ead2,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019ead4,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019ead6,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019ead8,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019eb30,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019eb32,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019eb34,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019eb36,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019eb38,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019eb3a,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'me019eb40,8' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 20:04:31] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 20:14:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x20201, excvaddr:0x0, epc:0x80004a26, epcdbg:80004a23 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004201,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800049a7,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-02 23:44:47] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004201,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800049a7,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-03 22:26:00] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004201,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm800049a7,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-03 23:01:54] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 00:32:57] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80004a26, epcdbg:80004a23 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 00:43:26] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 09:42:08] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 09:44:47] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80004528, epcdbg:80004525 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 09:47:08] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x800086f6, epcdbg:800086f3 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 09:49:04] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x800086f3, epcdbg:800086f0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 09:56:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Lost control over the target [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 22:40:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 22:59:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x8fffec0, epc:0x80004a26, epcdbg:80004a23 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8fffec0,300' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-04 23:36:52] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80004a29, epcdbg:80004a26 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004a6f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 00:02:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004a6f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 00:33:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004a6f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 00:42:23] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 15:24:43] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 15:32:50] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 15:48:53] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 Initialize XDM driver traxapp: listening on port 11444 Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,10' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,f' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,e' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,d' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,c' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,b' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,a' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,9' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,8' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,7' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,6' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,5' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,3' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,2' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72100, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72100,40' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x72104, epc:0x80011348, epcdbg:80011345 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm72107,1' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 15:59:27] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x4, epc:0x80000042, epcdbg:8000003f Error receiving data: ?????¡Â?¨²??????¡À??????????????????? Error: [ Target not in DEBUGGED state (RUNNING)!] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 16:14:41] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x172107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x170201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Overrun detected! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 16:52:17] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 17:03:16] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 17:28:16] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x40201, excvaddr:0x0, epc:0x80008efa, epcdbg:80008ef7 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 17:30:48] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x80004638, epcdbg:80004635 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 17:35:51] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x32107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x30201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 17:38:14] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 17:46:21] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error receiving data: ?????¡Â?¨²??????¡À??????????????????? XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 22:36:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 23:43:58] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80004c09, epcdbg:80004c06 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004b24,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004b8f,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-05 23:55:14] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 00:10:08] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80004c0c, epcdbg:80004c09 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x80000027, epcdbg:80000024 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x80000027, epcdbg:80000024 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x8000002a, epcdbg:80000027 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x8000002d, epcdbg:8000002a Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x80000030, epcdbg:8000002d Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x80000033, epcdbg:80000030 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x80000036, epcdbg:80000033 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x80000039, epcdbg:80000036 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x62107, excvaddr:0x0, epc:0x8000003c, epcdbg:80000039 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,10' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x50200, epc:0x800113f8, epcdbg:800113f5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm50201,2' failed! Error: Exception! Error: Exception WB.P:0x1, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x50200, epc:0x800113f8, epcdbg:800113f5 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm50201,2' failed! XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 00:18:07] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000440d,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004463,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004b84,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004bef,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 00:23:06] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 00:26:15] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x60201, excvaddr:0x0, epc:0x800046a5, epcdbg:800046a2 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Lost control over the target Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 11:00:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000440d,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004463,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004bef,2' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 11:24:56] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 11:31:16] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80004c66, epcdbg:80004c63 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x80004c80, epcdbg:80004c7d Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004473,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8fffff20,310' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000000,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000004,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000008,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm9000000c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000010,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000020,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000030,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000050,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000054,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000058,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm9000005c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000060,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 11:52:34] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver ERROR: Capture IR failed. Total IR bits : 0 WARNING: Chain Controller0: Bypass DR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0: Capture IR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0, Tap TAP0: IR Width differs, Topology sets 5, Capture IR got 0 WARNING: Examining scan chain failed! Warning: Failed to check IR (0x1f) Warning: Custom IDCODE ignored as different IDCODE is detected (custom: 0x20a43001)! Error: Unknown JTAG IDCODE (0xffffffff) - can't proceed! Error: XDM initialization failed ERROR: Couldn't initialize, exit... XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 11:55:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 13:12:55] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 14:01:32] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Lost control over the target Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008704,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80008704,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 17:23:08] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' traxapp: listening on port 11444 Opened GDB socket at port 20000 Initialize XDM driver ERROR: Capture IR failed. Total IR bits : 0 WARNING: Chain Controller0: Bypass DR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0: Capture IR method finds 0 TAPs while topology file sets 1 WARNING: Chain Controller0, Tap TAP0: IR Width differs, Topology sets 5, Capture IR got 0 WARNING: Examining scan chain failed! Warning: Failed to check IR (0x1f) Warning: Custom IDCODE ignored as different IDCODE is detected (custom: 0x20a43001)! Error: Unknown JTAG IDCODE (0xffffffff) - can't proceed! Error: XDM initialization failed ERROR: Couldn't initialize, exit... ^done,msg="Socket connected" XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 17:25:44] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000000,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000004,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000008,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm9000000c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000010,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000020,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000030,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000050,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000054,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000058,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm9000005c,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm90000060,10' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 17:58:46] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 18:45:03] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80004c80, epcdbg:80004c7d [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 18:54:40] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 19:49:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 20:31:20] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 20:49:37] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 21:01:05] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80012ba4,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm8000f3a8,1' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-06 23:26:47] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 11:03:24] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 11:35:14] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80004c7a, epcdbg:80004c77 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 11:42:00] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 15:16:09] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 15:37:20] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0x0, epc:0x3, epcdbg:0 XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 15:39:01] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x72107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x3, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x70201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm80004c03,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,10' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,f' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,e' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,d' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,c' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,b' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,a' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,9' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,8' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,7' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,6' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,5' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,4' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,3' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,2' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mc0,40' failed! Error: Exception! Error: Exception WB.P:0xf, MS:0xffffffff, IEEXTERN:0xffffffff Error: Exception details: exccause:0xffffffff, excvaddr:0xffffffff, epc:0xffffffff, epcdbg:fffffffc Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mfc,1' failed! Error: Lost control over the target XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 16:26:13] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x201, excvaddr:0xffffffe4, epc:0x3, epcdbg:0 Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! Error: Exception! Error: Exception WB.P:0x0, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x2113, excvaddr:0xffffffe4, epc:0x8000007b, epcdbg:80000078 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'mffffffe4,4' failed! [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 17:04:36] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x80004c80, epcdbg:80004c7d [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-07-07 17:14:38] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 Connected to Jlink Device: Name:'J-Link V11 compiled Sep 21 2020 17:00:29' S/N:261010009 Firmware: J-Link V11 compiled Sep 21 2020 17:00:29 Requested/Set TCK: 1000kHz/65534kHz Loading module "jtag" v2.0.0.20 Loading module "xtensa" v2.0.0.48 Loading module "traxapp" v2.0.0.8 Loading module "trax" v2.0.1.23 Starting thread 'GDBStub0' Starting thread 'TraxApp' Opened GDB socket at port 20000 traxapp: listening on port 11444 Initialize XDM driver Total IR bits : 5 TAP[0] irwidth = 5 Total DR bypass bits : 1 Warning: Custom release set to '(null)' while XOCD identified 'LX7_1/NX1_1' Warning: Target not under control. No status update performed Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x52107, excvaddr:0x0, epc:0x3, epcdbg:0 Error: Op 'xtensa_read_memory' failed, will not retry ERROR: Command 'm0,1' failed! Error: Exception! Error: Exception WB.P:0x2, MS:0x10, IEEXTERN:0x0 Error: Exception details: exccause:0x50201, excvaddr:0x0, epc:0x3, epcdbg:0 [Software breakpoints not supported in XOCD. GDB will handle breakpoints] XOCD 14.04 2020-04-03 14:39:18 (c) 1999-2021 Cadence Design Systems Inc. All rights reserved. [Debug Log 2021-09-01 13:45:39] Loading module "gdbstub" v2.0.0.12 Loading module "jlink" v2.0.2.0 Using JLINK lib v.68004 Jlink USB Serial Number: 261010009 ERROR: Failed to access device ! ERROR: Error starting probe driver for chain "Controller0"