123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118 |
- /*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
- /* DA9030 register definitions */
- #define CID 0x00
- #define EVENT_A 0x01
- #define EVENT_B 0x02
- #define EVENT_C 0x03
- #define STATUS 0x04
- #define IRQ_MASK_A 0x05
- #define IRQ_MASK_B 0x06
- #define IRQ_MASK_C 0x07
- #define SYS_CONTROL_A 0x08
- #define SYS_CONTROL_B 0x09
- #define FAULT_LOG 0x0A
- #define LDO_10_11 0x10
- #define LDO_15 0x11
- #define LDO_14_16 0x12
- #define LDO_18_19 0x13
- #define LDO_17_SIMCP0 0x14
- #define BUCK2_DVC1 0x15
- #define BUCK2_DVC2 0x16
- #define REG_CONTROL_1_17 0x17
- #define REG_CONTROL_2_18 0x18
- #define USBPUMP 0x19
- #define SLEEP_CONTROL 0x1A
- #define STARTUP_CONTROL 0x1B
- #define LED1_CONTROL 0x20
- #define LED2_CONTROL 0x21
- #define LED3_CONTROL 0x22
- #define LED4_CONTROL 0x23
- #define LEDPC_CONTROL 0x24
- #define WLED_CONTROL 0x25
- #define MISC_CONTROLA 0x26
- #define MISC_CONTROLB 0x27
- #define CHARGE_CONTROL 0x28
- #define CCTR_CONTROL 0x29
- #define TCTR_CONTROL 0x2A
- #define CHARGE_PULSE 0x2B
- /* ... some missing ...*/
- #define LDO1 0x90
- #define LDO2_3 0x91
- #define LDO4_5 0x92
- #define LDO6_SIMCP 0x93
- #define LDO7_8 0x94
- #define LDO9_12 0x95
- #define BUCK 0x96
- #define REG_CONTROL_1_97 0x97
- #define REG_CONTROL_2_98 0x98
- #define REG_SLEEP_CONTROL1 0x99
- #define REG_SLEEP_CONTROL2 0x9A
- #define REG_SLEEP_CONTROL3 0x9B
- #define ADC_MAN_CONTROL 0xA0
- #define ADC_AUTO_CONTROL 0xA1
- #define VBATMON 0xA2
- #define VBATMONTXMON 0xA3
- #define TBATHIGHP 0xA4
- #define TBATHIGHN 0xA5
- #define TBATLOW 0xA6
- #define MAN_RES 0xB0
- #define VBAT_RES 0xB1
- #define VBATMIN_RES 0xB2
- #define VBATMINTXON_RES 0xB3
- #define ICHMAX_RES 0xB4
- #define ICHMIN_RES 0xB5
- #define ICHAVERAGE_RES 0xB6
- #define VCHMAX_RES 0xB7
- #define VCHMIN_RES 0xB8
- #define TBAT_RES 0xB9
- #define ADC_IN4_RES 0xBA
- #define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */
- #define STATUS_PWREN1 (1<<1) /* PWREN1 value */
- #define STATUS_EXTON (1<<2) /* EXTON value */
- #define STATUS_CHDET (1<<3) /* Charger detection status */
- #define STATUS_TBAT (1<<4) /* Battery over/under temperature status */
- #define STATUS_VBATMON (1<<5) /* VBATMON comparison status */
- #define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */
- #define STATUS_CHIOVER (1<<7) /* Charge overcurrent */
- #define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1
- #define SYS_CONTROL_A_SHUT_DOWN (1<<1)
- #define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
- #define SYS_CONTROL_A_WDOG_ACTION (1<<3)
- #define SYS_CONTROL_A_WATCHDOG (1<<7)
- #define MISC_CONTROLB_USB_INT_RISING (1<<2)
- #define MISC_CONTROLB_SESSION_VALID_EN (1<<3)
- #define USB_PUMP_USBVE (1<<0)
- #define USB_PUMP_USBVEP (1<<1)
- #define USB_PUMP_SRP_DETECT (1<<2)
- #define USB_PUMP_SESSION_VALID (1<<3)
- #define USB_PUMP_VBUS_VALID_4_0 (1<<4)
- #define USB_PUMP_VBUS_VALID_4_4 (1<<5)
- #define USB_PUMP_EN_USBVE (1<<6)
- #define USB_PUMP_EN_USBVEP (1<<7)
|