Makefile 69 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099
  1. # SPDX-License-Identifier: GPL-2.0+
  2. VERSION = 2019
  3. PATCHLEVEL = 10
  4. SUBLEVEL =
  5. EXTRAVERSION =
  6. NAME =
  7. # *DOCUMENTATION*
  8. # To see a list of typical targets execute "make help"
  9. # More info can be located in ./README
  10. # Comments in this file are targeted only to the developer, do not
  11. # expect to learn how to build the kernel reading this file.
  12. # o Do not use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour);
  14. # o Look for make include files relative to root of kernel src
  15. MAKEFLAGS += -rR --include-dir=$(CURDIR)
  16. # Avoid funny character set dependencies
  17. unexport LC_ALL
  18. LC_COLLATE=C
  19. LC_NUMERIC=C
  20. export LC_COLLATE LC_NUMERIC
  21. # Avoid interference with shell env settings
  22. unexport GREP_OPTIONS
  23. # We are using a recursive build, so we need to do a little thinking
  24. # to get the ordering right.
  25. #
  26. # Most importantly: sub-Makefiles should only ever modify files in
  27. # their own directory. If in some directory we have a dependency on
  28. # a file in another dir (which doesn't happen often, but it's often
  29. # unavoidable when linking the built-in.o targets which finally
  30. # turn into vmlinux), we will call a sub make in that other dir, and
  31. # after that we are sure that everything which is in that other dir
  32. # is now up to date.
  33. #
  34. # The only cases where we need to modify files which have global
  35. # effects are thus separated out and done before the recursive
  36. # descending is started. They are now explicitly listed as the
  37. # prepare rule.
  38. # Beautify output
  39. # ---------------------------------------------------------------------------
  40. #
  41. # Normally, we echo the whole command before executing it. By making
  42. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  43. # $(quiet) to choose other forms of output instead, e.g.
  44. #
  45. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  46. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  47. #
  48. # If $(quiet) is empty, the whole command will be printed.
  49. # If it is set to "quiet_", only the short version will be printed.
  50. # If it is set to "silent_", nothing will be printed at all, since
  51. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  52. #
  53. # A simple variant is to prefix commands with $(Q) - that's useful
  54. # for commands that shall be hidden in non-verbose mode.
  55. #
  56. # $(Q)ln $@ :<
  57. #
  58. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  59. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  60. #
  61. # To put more focus on warnings, be less verbose as default
  62. # Use 'make V=1' to see the full commands
  63. ifeq ("$(origin V)", "command line")
  64. KBUILD_VERBOSE = $(V)
  65. endif
  66. ifndef KBUILD_VERBOSE
  67. KBUILD_VERBOSE = 0
  68. endif
  69. ifeq ($(KBUILD_VERBOSE),1)
  70. quiet =
  71. Q =
  72. else
  73. quiet=quiet_
  74. Q = @
  75. endif
  76. # If the user is running make -s (silent mode), suppress echoing of
  77. # commands
  78. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  79. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  80. quiet=silent_
  81. endif
  82. else # make-3.8x
  83. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  84. quiet=silent_
  85. endif
  86. endif
  87. export quiet Q KBUILD_VERBOSE
  88. # kbuild supports saving output files in a separate directory.
  89. # To locate output files in a separate directory two syntaxes are supported.
  90. # In both cases the working directory must be the root of the kernel src.
  91. # 1) O=
  92. # Use "make O=dir/to/store/output/files/"
  93. #
  94. # 2) Set KBUILD_OUTPUT
  95. # Set the environment variable KBUILD_OUTPUT to point to the directory
  96. # where the output files shall be placed.
  97. # export KBUILD_OUTPUT=dir/to/store/output/files/
  98. # make
  99. #
  100. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  101. # variable.
  102. # KBUILD_SRC is set on invocation of make in OBJ directory
  103. # KBUILD_SRC is not intended to be used by the regular user (for now)
  104. ifeq ($(KBUILD_SRC),)
  105. # OK, Make called in directory where kernel src resides
  106. # Do we want to locate output files in a separate directory?
  107. ifeq ("$(origin O)", "command line")
  108. KBUILD_OUTPUT := $(O)
  109. endif
  110. # That's our default target when none is given on the command line
  111. PHONY := _all
  112. _all:
  113. # Cancel implicit rules on top Makefile
  114. $(CURDIR)/Makefile Makefile: ;
  115. ifneq ($(KBUILD_OUTPUT),)
  116. # Invoke a second make in the output directory, passing relevant variables
  117. # check that the output directory actually exists
  118. saved-output := $(KBUILD_OUTPUT)
  119. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  120. && /bin/pwd)
  121. $(if $(KBUILD_OUTPUT),, \
  122. $(error failed to create output directory "$(saved-output)"))
  123. PHONY += $(MAKECMDGOALS) sub-make
  124. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  125. @:
  126. sub-make: FORCE
  127. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  128. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  129. # Leave processing to above invocation of make
  130. skip-makefile := 1
  131. endif # ifneq ($(KBUILD_OUTPUT),)
  132. endif # ifeq ($(KBUILD_SRC),)
  133. # We process the rest of the Makefile if this is the final invocation of make
  134. ifeq ($(skip-makefile),)
  135. # Do not print "Entering directory ...",
  136. # but we want to display it when entering to the output directory
  137. # so that IDEs/editors are able to understand relative filenames.
  138. MAKEFLAGS += --no-print-directory
  139. # Call a source code checker (by default, "sparse") as part of the
  140. # C compilation.
  141. #
  142. # Use 'make C=1' to enable checking of only re-compiled files.
  143. # Use 'make C=2' to enable checking of *all* source files, regardless
  144. # of whether they are re-compiled or not.
  145. #
  146. # See the file "doc/sparse.txt" for more details, including
  147. # where to get the "sparse" utility.
  148. ifeq ("$(origin C)", "command line")
  149. KBUILD_CHECKSRC = $(C)
  150. endif
  151. ifndef KBUILD_CHECKSRC
  152. KBUILD_CHECKSRC = 0
  153. endif
  154. # Use make M=dir to specify directory of external module to build
  155. # Old syntax make ... SUBDIRS=$PWD is still supported
  156. # Setting the environment variable KBUILD_EXTMOD take precedence
  157. ifdef SUBDIRS
  158. KBUILD_EXTMOD ?= $(SUBDIRS)
  159. endif
  160. ifeq ("$(origin M)", "command line")
  161. KBUILD_EXTMOD := $(M)
  162. endif
  163. # If building an external module we do not care about the all: rule
  164. # but instead _all depend on modules
  165. PHONY += all
  166. ifeq ($(KBUILD_EXTMOD),)
  167. _all: all
  168. else
  169. _all: modules
  170. endif
  171. ifeq ($(KBUILD_SRC),)
  172. # building in the source tree
  173. srctree := .
  174. else
  175. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  176. # building in a subdirectory of the source tree
  177. srctree := ..
  178. else
  179. srctree := $(KBUILD_SRC)
  180. endif
  181. endif
  182. objtree := .
  183. src := $(srctree)
  184. obj := $(objtree)
  185. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  186. export srctree objtree VPATH
  187. # Make sure CDPATH settings don't interfere
  188. unexport CDPATH
  189. #########################################################################
  190. HOSTARCH := $(shell uname -m | \
  191. sed -e s/i.86/x86/ \
  192. -e s/sun4u/sparc64/ \
  193. -e s/arm.*/arm/ \
  194. -e s/sa110/arm/ \
  195. -e s/ppc64/powerpc/ \
  196. -e s/ppc/powerpc/ \
  197. -e s/macppc/powerpc/\
  198. -e s/sh.*/sh/)
  199. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  200. sed -e 's/\(cygwin\).*/cygwin/')
  201. export HOSTARCH HOSTOS
  202. #########################################################################
  203. # set default to nothing for native builds
  204. ifeq ($(HOSTARCH),$(ARCH))
  205. CROSS_COMPILE ?=
  206. endif
  207. KCONFIG_CONFIG ?= .config
  208. export KCONFIG_CONFIG
  209. # SHELL used by kbuild
  210. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  211. else if [ -x /bin/bash ]; then echo /bin/bash; \
  212. else echo sh; fi ; fi)
  213. HOSTCC = cc
  214. HOSTCXX = c++
  215. HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
  216. $(if $(CONFIG_TOOLS_DEBUG),-g)
  217. HOSTCXXFLAGS = -O2
  218. # With the move to GCC 6, we have implicitly upgraded our language
  219. # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
  220. # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
  221. # have older compilers as their default, so we make it explicit for
  222. # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
  223. CSTD_FLAG := -std=gnu11
  224. ifeq ($(HOSTOS),linux)
  225. HOSTCFLAGS += $(CSTD_FLAG)
  226. endif
  227. ifeq ($(HOSTOS),cygwin)
  228. HOSTCFLAGS += -ansi
  229. endif
  230. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  231. # generates numerous errors and warnings. We want to bypass it
  232. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  233. # option to the compiler. Note that the -traditional-cpp flag
  234. # DOES NOT have the same semantics as GNU C's flag, all it does
  235. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  236. #
  237. # Apple's linker is similar, thanks to the new 2 stage linking
  238. # multiple symbol definitions are treated as errors, hence the
  239. # -multiply_defined suppress option to turn off this error.
  240. #
  241. ifeq ($(HOSTOS),darwin)
  242. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  243. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  244. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  245. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  246. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  247. os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
  248. $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  249. # Snow Leopards build environment has no longer restrictions as described above
  250. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  251. HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  252. HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  253. # since Lion (10.7) ASLR is on by default, but we use linker generated lists
  254. # in some host tools which is a problem then ... so disable ASLR for these
  255. # tools
  256. HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
  257. # macOS Mojave (10.14.X)
  258. # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
  259. HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
  260. endif
  261. # Decide whether to build built-in, modular, or both.
  262. # Normally, just do built-in.
  263. KBUILD_MODULES :=
  264. KBUILD_BUILTIN := 1
  265. # If we have only "make modules", don't compile built-in objects.
  266. # When we're building modules with modversions, we need to consider
  267. # the built-in objects during the descend as well, in order to
  268. # make sure the checksums are up to date before we record them.
  269. ifeq ($(MAKECMDGOALS),modules)
  270. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  271. endif
  272. # If we have "make <whatever> modules", compile modules
  273. # in addition to whatever we do anyway.
  274. # Just "make" or "make all" shall build modules as well
  275. # U-Boot does not need modules
  276. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  277. # KBUILD_MODULES := 1
  278. #endif
  279. #ifeq ($(MAKECMDGOALS),)
  280. # KBUILD_MODULES := 1
  281. #endif
  282. define size_check
  283. actual=$$( wc -c $1 | awk '{print $$1}'); \
  284. limit=$$( printf "%d" $2 ); \
  285. if test $$actual -gt $$limit; then \
  286. echo "$1 exceeds file size limit:" >&2; \
  287. echo " limit: $$limit bytes" >&2; \
  288. echo " actual: $$actual bytes" >&2; \
  289. echo " excess: $$((actual - limit)) bytes" >&2; \
  290. exit 1; \
  291. fi
  292. endef
  293. export size_check
  294. export KBUILD_MODULES KBUILD_BUILTIN
  295. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  296. # We need some generic definitions (do not try to remake the file).
  297. scripts/Kbuild.include: ;
  298. include scripts/Kbuild.include
  299. # Make variables (CC, etc...)
  300. AS = $(CROSS_COMPILE)as
  301. # Always use GNU ld
  302. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  303. LD = $(CROSS_COMPILE)ld.bfd
  304. else
  305. LD = $(CROSS_COMPILE)ld
  306. endif
  307. CC = $(CROSS_COMPILE)gcc
  308. CPP = $(CC) -E
  309. AR = $(CROSS_COMPILE)ar
  310. NM = $(CROSS_COMPILE)nm
  311. LDR = $(CROSS_COMPILE)ldr
  312. STRIP = $(CROSS_COMPILE)strip
  313. OBJCOPY = $(CROSS_COMPILE)objcopy
  314. OBJDUMP = $(CROSS_COMPILE)objdump
  315. LEX = flex
  316. YACC = bison
  317. AWK = awk
  318. PERL = perl
  319. PYTHON ?= python
  320. PYTHON2 = python2
  321. PYTHON3 = python3
  322. DTC ?= $(objtree)/scripts/dtc/dtc
  323. CHECK = sparse
  324. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  325. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  326. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  327. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  328. -Wno-format-security \
  329. -fno-builtin -ffreestanding $(CSTD_FLAG)
  330. KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
  331. KBUILD_AFLAGS := -D__ASSEMBLY__
  332. # Don't generate position independent code
  333. KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
  334. KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
  335. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  336. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  337. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  338. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  339. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  340. export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
  341. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
  342. export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
  343. export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
  344. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
  345. export KBUILD_CFLAGS KBUILD_AFLAGS
  346. # When compiling out-of-tree modules, put MODVERDIR in the module
  347. # tree rather than in the kernel tree. The kernel tree might
  348. # even be read-only.
  349. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  350. # Files to ignore in find ... statements
  351. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  352. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  353. -prune -o
  354. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  355. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  356. # ===========================================================================
  357. # Rules shared between *config targets and build targets
  358. # Basic helpers built in scripts/
  359. PHONY += scripts_basic
  360. scripts_basic:
  361. $(Q)$(MAKE) $(build)=scripts/basic
  362. $(Q)rm -f .tmp_quiet_recordmcount
  363. # To avoid any implicit rule to kick in, define an empty command.
  364. scripts/basic/%: scripts_basic ;
  365. PHONY += outputmakefile
  366. # outputmakefile generates a Makefile in the output directory, if using a
  367. # separate output directory. This allows convenient use of make in the
  368. # output directory.
  369. outputmakefile:
  370. ifneq ($(KBUILD_SRC),)
  371. $(Q)ln -fsn $(srctree) source
  372. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
  373. $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
  374. endif
  375. # To make sure we do not include .config for any of the *config targets
  376. # catch them early, and hand them over to scripts/kconfig/Makefile
  377. # It is allowed to specify more targets when calling make, including
  378. # mixing *config targets and build targets.
  379. # For example 'make oldconfig all'.
  380. # Detect when mixed targets is specified, and make a second invocation
  381. # of make so .config is not included in this case either (for *config).
  382. version_h := include/generated/version_autogenerated.h
  383. timestamp_h := include/generated/timestamp_autogenerated.h
  384. defaultenv_h := include/generated/defaultenv_autogenerated.h
  385. no-dot-config-targets := clean clobber mrproper distclean \
  386. help %docs check% coccicheck \
  387. ubootversion backup tests check qcheck
  388. config-targets := 0
  389. mixed-targets := 0
  390. dot-config := 1
  391. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  392. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  393. dot-config := 0
  394. endif
  395. endif
  396. ifeq ($(KBUILD_EXTMOD),)
  397. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  398. config-targets := 1
  399. ifneq ($(words $(MAKECMDGOALS)),1)
  400. mixed-targets := 1
  401. endif
  402. endif
  403. endif
  404. ifeq ($(mixed-targets),1)
  405. # ===========================================================================
  406. # We're called with mixed targets (*config and build targets).
  407. # Handle them one by one.
  408. PHONY += $(MAKECMDGOALS) __build_one_by_one
  409. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  410. @:
  411. __build_one_by_one:
  412. $(Q)set -e; \
  413. for i in $(MAKECMDGOALS); do \
  414. $(MAKE) -f $(srctree)/Makefile $$i; \
  415. done
  416. else
  417. ifeq ($(config-targets),1)
  418. # ===========================================================================
  419. # *config targets only - make sure prerequisites are updated, and descend
  420. # in scripts/kconfig to make the *config target
  421. KBUILD_DEFCONFIG := sandbox_defconfig
  422. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  423. config: scripts_basic outputmakefile FORCE
  424. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  425. %config: scripts_basic outputmakefile FORCE
  426. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  427. else
  428. # ===========================================================================
  429. # Build targets only - this includes vmlinux, arch specific targets, clean
  430. # targets and others. In general all targets except *config targets.
  431. # Additional helpers built in scripts/
  432. # Carefully list dependencies so we do not try to build scripts twice
  433. # in parallel
  434. PHONY += scripts
  435. scripts: scripts_basic include/config/auto.conf
  436. $(Q)$(MAKE) $(build)=$(@)
  437. ifeq ($(dot-config),1)
  438. # Read in config
  439. -include include/config/auto.conf
  440. # Read in dependencies to all Kconfig* files, make sure to run
  441. # oldconfig if changes are detected.
  442. -include include/config/auto.conf.cmd
  443. # To avoid any implicit rule to kick in, define an empty command
  444. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  445. # If .config is newer than include/config/auto.conf, someone tinkered
  446. # with it and forgot to run make oldconfig.
  447. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  448. # we execute the config step to be sure to catch updated Kconfig files
  449. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  450. $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
  451. @# If the following part fails, include/config/auto.conf should be
  452. @# deleted so "make silentoldconfig" will be re-run on the next build.
  453. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  454. { rm -f include/config/auto.conf; false; }
  455. @# include/config.h has been updated after "make silentoldconfig".
  456. @# We need to touch include/config/auto.conf so it gets newer
  457. @# than include/config.h.
  458. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  459. $(Q)touch include/config/auto.conf
  460. u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
  461. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
  462. -include include/autoconf.mk
  463. -include include/autoconf.mk.dep
  464. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  465. # is up-to-date. When we switch to a different board configuration, old CONFIG
  466. # macros are still remaining in include/config/auto.conf. Without the following
  467. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  468. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  469. ifneq ($(wildcard include/config/auto.conf),)
  470. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  471. include/config/auto.conf)
  472. ifeq ($(autoconf_is_old),)
  473. include config.mk
  474. include arch/$(ARCH)/Makefile
  475. endif
  476. endif
  477. endif
  478. # These are set by the arch-specific config.mk. Make sure they are exported
  479. # so they can be used when building an EFI application.
  480. export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
  481. export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
  482. export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
  483. export CFLAGS_EFI # Compiler flags to add when building EFI app
  484. export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
  485. export EFI_TARGET # binutils target if EFI is natively supported
  486. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  487. # that (or fail if absent). Otherwise, search for a linker script in a
  488. # standard location.
  489. ifndef LDSCRIPT
  490. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  491. ifdef CONFIG_SYS_LDSCRIPT
  492. # need to strip off double quotes
  493. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  494. endif
  495. endif
  496. # If there is no specified link script, we look in a number of places for it
  497. ifndef LDSCRIPT
  498. ifeq ($(wildcard $(LDSCRIPT)),)
  499. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  500. endif
  501. ifeq ($(wildcard $(LDSCRIPT)),)
  502. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  503. endif
  504. ifeq ($(wildcard $(LDSCRIPT)),)
  505. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  506. endif
  507. endif
  508. else
  509. # Dummy target needed, because used as prerequisite
  510. include/config/auto.conf: ;
  511. endif # $(dot-config)
  512. #
  513. # Xtensa linker script cannot be preprocessed with -ansi because of
  514. # preprocessor operations on strings that don't make C identifiers.
  515. #
  516. ifeq ($(CONFIG_XTENSA),)
  517. LDPPFLAGS += -ansi
  518. endif
  519. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  520. KBUILD_CFLAGS += -Os
  521. else
  522. KBUILD_CFLAGS += -O2
  523. endif
  524. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  525. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  526. # change __FILE__ to the relative path from the srctree
  527. KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
  528. KBUILD_CFLAGS += -g
  529. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  530. # option to the assembler.
  531. KBUILD_AFLAGS += -g
  532. # Report stack usage if supported
  533. # ARC tools based on GCC 7.1 has an issue with stack usage
  534. # with naked functions, see commit message for more details
  535. ifndef CONFIG_ARC
  536. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  537. KBUILD_CFLAGS += -fstack-usage
  538. endif
  539. endif
  540. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  541. ifeq ($(cc-name),clang)
  542. KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
  543. KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
  544. KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
  545. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  546. KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
  547. endif
  548. # turn jbsr into jsr for m68k
  549. ifeq ($(ARCH),m68k)
  550. ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
  551. KBUILD_AFLAGS += -Wa,-gstabs,-S
  552. endif
  553. endif
  554. # Prohibit date/time macros, which would make the build non-deterministic
  555. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  556. include scripts/Makefile.extrawarn
  557. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  558. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  559. KBUILD_AFLAGS += $(KAFLAGS)
  560. KBUILD_CFLAGS += $(KCFLAGS)
  561. # Use UBOOTINCLUDE when you must reference the include/ directory.
  562. # Needed to be compatible with the O= option
  563. UBOOTINCLUDE := \
  564. -Iinclude \
  565. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  566. $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
  567. $(if $(CONFIG_HAS_THUMB2),, \
  568. -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
  569. -I$(srctree)/arch/$(ARCH)/include \
  570. -include $(srctree)/include/linux/kconfig.h
  571. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  572. CHECKFLAGS += $(NOSTDINC_FLAGS)
  573. # FIX ME
  574. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  575. $(NOSTDINC_FLAGS)
  576. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  577. #########################################################################
  578. # U-Boot objects....order is important (i.e. start must be first)
  579. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  580. libs-y += lib/
  581. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  582. libs-$(CONFIG_OF_EMBED) += dts/
  583. libs-y += fs/
  584. libs-y += net/
  585. libs-y += disk/
  586. libs-y += drivers/
  587. libs-y += drivers/dma/
  588. libs-y += drivers/gpio/
  589. libs-y += drivers/i2c/
  590. libs-y += drivers/mtd/
  591. libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
  592. libs-y += drivers/mtd/onenand/
  593. libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
  594. libs-y += drivers/mtd/spi/
  595. libs-y += drivers/net/
  596. libs-y += drivers/net/phy/
  597. libs-y += drivers/power/ \
  598. drivers/power/domain/ \
  599. drivers/power/fuel_gauge/ \
  600. drivers/power/mfd/ \
  601. drivers/power/pmic/ \
  602. drivers/power/battery/ \
  603. drivers/power/regulator/
  604. libs-y += drivers/spi/
  605. libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
  606. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  607. libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
  608. libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
  609. libs-y += drivers/serial/
  610. libs-y += drivers/usb/dwc3/
  611. libs-y += drivers/usb/common/
  612. libs-y += drivers/usb/emul/
  613. libs-y += drivers/usb/eth/
  614. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
  615. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
  616. libs-y += drivers/usb/host/
  617. libs-y += drivers/usb/musb/
  618. libs-y += drivers/usb/musb-new/
  619. libs-y += drivers/usb/phy/
  620. libs-y += drivers/usb/ulpi/
  621. libs-y += cmd/
  622. libs-y += common/
  623. libs-y += env/
  624. libs-$(CONFIG_API) += api/
  625. libs-$(CONFIG_HAS_POST) += post/
  626. libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
  627. libs-$(CONFIG_UT_ENV) += test/env/
  628. libs-$(CONFIG_UT_OVERLAY) += test/overlay/
  629. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  630. libs-y := $(sort $(libs-y))
  631. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  632. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  633. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  634. u-boot-init := $(head-y)
  635. u-boot-main := $(libs-y)
  636. # Add GCC lib
  637. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  638. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  639. else
  640. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  641. endif
  642. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  643. ifdef CONFIG_CC_COVERAGE
  644. KBUILD_CFLAGS += --coverage
  645. PLATFORM_LIBGCC += -lgcov
  646. endif
  647. export PLATFORM_LIBS
  648. export PLATFORM_LIBGCC
  649. # Special flags for CPP when processing the linker script.
  650. # Pass the version down so we can handle backwards compatibility
  651. # on the fly.
  652. LDPPFLAGS += \
  653. -include $(srctree)/include/u-boot/u-boot.lds.h \
  654. -DCPUDIR=$(CPUDIR) \
  655. $(shell $(LD) --version | \
  656. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  657. #########################################################################
  658. #########################################################################
  659. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  660. BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
  661. else
  662. BOARD_SIZE_CHECK =
  663. endif
  664. ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
  665. SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
  666. else
  667. SPL_SIZE_CHECK =
  668. endif
  669. # Statically apply RELA-style relocations (currently arm64 only)
  670. # This is useful for arm64 where static relocation needs to be performed on
  671. # the raw binary, but certain simulators only accept an ELF file (but don't
  672. # do the relocation).
  673. ifneq ($(CONFIG_STATIC_RELA),)
  674. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  675. DO_STATIC_RELA = \
  676. start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  677. end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  678. tools/relocate-rela $(2) $(3) $$start $$end
  679. else
  680. DO_STATIC_RELA =
  681. endif
  682. # Always append ALL so that arch config.mk's can add custom ones
  683. ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
  684. ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  685. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  686. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  687. else
  688. ifneq ($(CONFIG_SECURE_BOOT), y)
  689. # For Secure Boot The Image needs to be signed and Header must also
  690. # be included. So The image has to be built explicitly
  691. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  692. endif
  693. endif
  694. ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
  695. ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
  696. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  697. else
  698. ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
  699. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  700. else
  701. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  702. endif
  703. endif
  704. ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  705. ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  706. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  707. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  708. endif
  709. ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  710. ifneq ($(CONFIG_SPL_TARGET),)
  711. ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  712. endif
  713. ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
  714. ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
  715. ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  716. ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
  717. ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
  718. endif
  719. # Build a combined spl + u-boot image for sunxi
  720. ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
  721. ALL-y += u-boot-sunxi-with-spl.bin
  722. endif
  723. # enable combined SPL/u-boot/dtb rules for tegra
  724. ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
  725. ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
  726. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
  727. endif
  728. ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
  729. # Add optional build target if defined in board/cpu/soc headers
  730. ifneq ($(CONFIG_BUILD_TARGET),)
  731. ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
  732. endif
  733. ifdef CONFIG_INIT_SP_RELATIVE
  734. ALL-y += init_sp_bss_offset_check
  735. endif
  736. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  737. ALL-y += u-boot-with-dtb.bin
  738. endif
  739. ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
  740. ALL-y += idbloader.img
  741. endif
  742. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  743. # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
  744. LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
  745. ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
  746. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  747. endif
  748. # Normally we fill empty space with 0xff
  749. quiet_cmd_objcopy = OBJCOPY $@
  750. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  751. $(OBJCOPYFLAGS_$(@F)) $< $@
  752. # Provide a version which does not do this, for use by EFI
  753. quiet_cmd_zobjcopy = OBJCOPY $@
  754. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  755. quiet_cmd_efipayload = OBJCOPY $@
  756. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  757. MKIMAGEOUTPUT ?= /dev/null
  758. quiet_cmd_mkimage = MKIMAGE $@
  759. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  760. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  761. quiet_cmd_mkfitimage = MKIMAGE $@
  762. cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
  763. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  764. quiet_cmd_cat = CAT $@
  765. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  766. append = cat $(filter-out $< $(PHONY), $^) >> $@
  767. quiet_cmd_pad_cat = CAT $@
  768. cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
  769. cfg: u-boot.cfg
  770. quiet_cmd_cfgcheck = CFGCHK $2
  771. cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
  772. $(srctree)/scripts/config_whitelist.txt $(srctree)
  773. all: $(ALL-y)
  774. ifeq ($(CONFIG_DEPRECATED),y)
  775. $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
  776. ifeq ($(CONFIG_SPI),y)
  777. ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
  778. $(warning "The relevant config item with associated code will remove in v2019.07 release.")
  779. endif
  780. endif
  781. endif
  782. ifneq ($(CONFIG_DM),y)
  783. @echo >&2 "===================== WARNING ======================"
  784. @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
  785. @echo >&2 "compulsory starting with the v2020.01 release."
  786. @echo >&2 "Failure to update may result in board removal."
  787. @echo >&2 "See doc/driver-model/migration.rst for more info."
  788. @echo >&2 "===================================================="
  789. endif
  790. ifeq ($(CONFIG_MMC),y)
  791. ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
  792. @echo >&2 "===================== WARNING ======================"
  793. @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
  794. @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
  795. @echo >&2 "Failure to update by the deadline may result in board removal."
  796. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  797. @echo >&2 "===================================================="
  798. endif
  799. endif
  800. ifeq ($(CONFIG_USB),y)
  801. ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
  802. @echo >&2 "===================== WARNING ======================"
  803. @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
  804. @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
  805. @echo >&2 "Failure to update by the deadline may result in board removal."
  806. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  807. @echo >&2 "===================================================="
  808. endif
  809. endif
  810. ifeq ($(CONFIG_MVSATA_IDE),y)
  811. @echo >&2 "===================== WARNING ======================"
  812. @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
  813. @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
  814. @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
  815. @echo >&2 "release."
  816. @echo >&2 "Failure to update by the deadline may result in board removal."
  817. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  818. @echo >&2 "===================================================="
  819. endif
  820. ifeq ($(CONFIG_LIBATA),y)
  821. ifneq ($(CONFIG_AHCI),y)
  822. @echo >&2 "===================== WARNING ======================"
  823. @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
  824. @echo >&2 "enabled. Please update the storage controller driver to use"
  825. @echo >&2 "CONFIG_AHCI before the v2019.07 release."
  826. @echo >&2 "Failure to update by the deadline may result in board removal."
  827. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  828. @echo >&2 "===================================================="
  829. endif
  830. endif
  831. ifeq ($(CONFIG_PCI),y)
  832. ifneq ($(CONFIG_DM_PCI),y)
  833. @echo >&2 "===================== WARNING ======================"
  834. @echo >&2 "This board does not use CONFIG_DM_PCI Please update"
  835. @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
  836. @echo >&2 "Failure to update by the deadline may result in board removal."
  837. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  838. @echo >&2 "===================================================="
  839. endif
  840. endif
  841. ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
  842. ifneq ($(CONFIG_DM_VIDEO),y)
  843. @echo >&2 "===================== WARNING ======================"
  844. @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
  845. @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
  846. @echo >&2 "Failure to update by the deadline may result in board removal."
  847. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  848. @echo >&2 "===================================================="
  849. endif
  850. endif
  851. ifeq ($(CONFIG_OF_EMBED),y)
  852. @echo >&2 "===================== WARNING ======================"
  853. @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
  854. @echo >&2 "be used for debugging purposes. Please use"
  855. @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
  856. @echo >&2 "See doc/README.fdt-control for more info."
  857. @echo >&2 "===================================================="
  858. endif
  859. ifeq ($(CONFIG_SPI_FLASH),y)
  860. ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
  861. @echo >&2 "===================== WARNING ======================"
  862. @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
  863. @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
  864. @echo >&2 "Failure to update by the deadline may result in board removal."
  865. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  866. @echo >&2 "===================================================="
  867. endif
  868. endif
  869. ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
  870. ifneq ($(CONFIG_WDT),y)
  871. @echo >&2 "===================== WARNING ======================"
  872. @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
  873. @echo >&2 "Please update the board to use CONFIG_WDT before the"
  874. @echo >&2 "v2019.10 release."
  875. @echo >&2 "Failure to update by the deadline may result in board removal."
  876. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  877. @echo >&2 "===================================================="
  878. endif
  879. endif
  880. ifneq ($(CONFIG_NET),)
  881. ifneq ($(CONFIG_DM_ETH),y)
  882. @echo >&2 "===================== WARNING ======================"
  883. @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
  884. @echo >&2 "for Ethernet drivers). Please update the board to use"
  885. @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
  886. @echo >&2 "update by the deadline may result in board removal."
  887. @echo >&2 "See doc/driver-model/migration.rst for more info."
  888. @echo >&2 "===================================================="
  889. endif
  890. endif
  891. @# Check that this build does not use CONFIG options that we do not
  892. @# know about unless they are in Kconfig. All the existing CONFIG
  893. @# options are whitelisted, so new ones should not be added.
  894. $(call cmd,cfgcheck,u-boot.cfg)
  895. PHONY += dtbs
  896. dtbs: dts/dt.dtb
  897. @:
  898. dts/dt.dtb: u-boot
  899. $(Q)$(MAKE) $(build)=dts dtbs
  900. quiet_cmd_copy = COPY $@
  901. cmd_copy = cp $< $@
  902. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  903. ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
  904. FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
  905. else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
  906. FINAL_DTB_CONTAINER = fit-dtb.blob.gz
  907. else
  908. FINAL_DTB_CONTAINER = fit-dtb.blob
  909. endif
  910. fit-dtb.blob.gz: fit-dtb.blob
  911. @gzip -kf9 $< > $@
  912. fit-dtb.blob.lzo: fit-dtb.blob
  913. @lzop -f9 $< > $@
  914. fit-dtb.blob: dts/dt.dtb FORCE
  915. $(call if_changed,mkimage)
  916. ifneq ($(SOURCE_DATE_EPOCH),)
  917. touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
  918. chmod 0600 fit-dtb.blob
  919. endif
  920. MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  921. -a 0 -e 0 -E \
  922. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
  923. ifneq ($(EXT_DTB),)
  924. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
  925. $(call if_changed,cat)
  926. else
  927. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
  928. $(call if_changed,cat)
  929. endif
  930. u-boot.bin: u-boot-fit-dtb.bin FORCE
  931. $(call if_changed,copy)
  932. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  933. $(call if_changed,cat)
  934. else ifeq ($(CONFIG_OF_SEPARATE),y)
  935. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  936. $(call if_changed,cat)
  937. u-boot.bin: u-boot-dtb.bin FORCE
  938. $(call if_changed,copy)
  939. else
  940. u-boot.bin: u-boot-nodtb.bin FORCE
  941. $(call if_changed,copy)
  942. endif
  943. %.imx: %.bin
  944. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  945. $(BOARD_SIZE_CHECK)
  946. %.vyb: %.imx
  947. $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
  948. quiet_cmd_copy = COPY $@
  949. cmd_copy = cp $< $@
  950. u-boot.dtb: dts/dt.dtb
  951. $(call cmd,copy)
  952. OBJCOPYFLAGS_u-boot.hex := -O ihex
  953. OBJCOPYFLAGS_u-boot.srec := -O srec
  954. u-boot.hex u-boot.srec: u-boot FORCE
  955. $(call if_changed,objcopy)
  956. OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
  957. u-boot-elf.srec: u-boot.elf FORCE
  958. $(call if_changed,objcopy)
  959. OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
  960. spl/u-boot-spl.srec: spl/u-boot-spl FORCE
  961. $(call if_changed,objcopy)
  962. %.scif: %.srec
  963. $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
  964. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  965. $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
  966. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
  967. OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
  968. spl/u-boot-spl.hex: spl/u-boot-spl FORCE
  969. $(call if_changed,objcopy)
  970. binary_size_check: u-boot-nodtb.bin FORCE
  971. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  972. map_size=$(shell cat u-boot.map | \
  973. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  974. | sed 's/0X//g' \
  975. | bc); \
  976. if [ "" != "$$map_size" ]; then \
  977. if test $$map_size -ne $$file_size; then \
  978. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  979. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  980. exit 1; \
  981. fi \
  982. fi
  983. ifdef CONFIG_INIT_SP_RELATIVE
  984. ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
  985. subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
  986. else
  987. subtract_sys_malloc_f_len = true
  988. endif
  989. # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
  990. # so low that the DTB could probably use 90%+ of the available space, for
  991. # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
  992. # safe for now and tweak this later if space becomes tight.
  993. # A rejected alternative would be to check that some absolute minimum stack
  994. # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
  995. # deliberately build-specific, to take account of build-to-build stack usage
  996. # differences due to different feature sets, there is no common absolute value
  997. # to check against.
  998. init_sp_bss_offset_check: u-boot.dtb FORCE
  999. @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
  1000. space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
  1001. $(subtract_sys_malloc_f_len) ; \
  1002. quarter_space=$$(($${space} / 4)) ; \
  1003. if [ $${dtb_size} -gt $${quarter_space} ]; then \
  1004. echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
  1005. echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
  1006. exit 1 ; \
  1007. fi
  1008. endif
  1009. u-boot-nodtb.bin: u-boot FORCE
  1010. $(call if_changed,objcopy)
  1011. $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
  1012. $(BOARD_SIZE_CHECK)
  1013. u-boot.ldr: u-boot
  1014. $(CREATE_LDR_ENV)
  1015. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  1016. $(BOARD_SIZE_CHECK)
  1017. # binman
  1018. # ---------------------------------------------------------------------------
  1019. # Use 'make BINMAN_DEBUG=1' to enable debugging
  1020. quiet_cmd_binman = BINMAN $@
  1021. cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
  1022. build -u -d u-boot.dtb -O . -m \
  1023. -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
  1024. $(BINMAN_$(@F))
  1025. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  1026. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  1027. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  1028. $(call if_changed,objcopy)
  1029. #
  1030. # U-Boot entry point, needed for booting of full-blown U-Boot
  1031. # from the SPL U-Boot version.
  1032. #
  1033. ifndef CONFIG_SYS_UBOOT_START
  1034. CONFIG_SYS_UBOOT_START := 0
  1035. endif
  1036. # Boards with more complex image requirements can provide an .its source file
  1037. # or a generator script
  1038. ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
  1039. U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
  1040. else
  1041. ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
  1042. U_BOOT_ITS := u-boot.its
  1043. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
  1044. U_BOOT_ITS_DEPS += u-boot-nodtb.bin
  1045. endif
  1046. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
  1047. U_BOOT_ITS_DEPS += u-boot
  1048. endif
  1049. $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
  1050. $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
  1051. $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
  1052. endif
  1053. endif
  1054. ifdef CONFIG_SPL_LOAD_FIT
  1055. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1056. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1057. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  1058. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
  1059. else
  1060. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  1061. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1062. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1063. MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
  1064. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1065. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1066. u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
  1067. CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
  1068. endif
  1069. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  1070. MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
  1071. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  1072. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
  1073. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1074. $(if $(KEYDIR),-k $(KEYDIR))
  1075. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1076. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  1077. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1078. UBOOT_BIN := u-boot-with-dtb.bin
  1079. else
  1080. UBOOT_BIN := u-boot.bin
  1081. endif
  1082. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
  1083. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
  1084. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1085. ,$(UBOOT_BIN)) FORCE
  1086. $(call if_changed,mkimage)
  1087. $(BOARD_SIZE_CHECK)
  1088. ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
  1089. MKIMAGEFLAGS_u-boot.itb =
  1090. else
  1091. MKIMAGEFLAGS_u-boot.itb = -E
  1092. endif
  1093. u-boot.itb: u-boot-nodtb.bin \
  1094. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1095. $(U_BOOT_ITS) FORCE
  1096. $(call if_changed,mkfitimage)
  1097. $(BOARD_SIZE_CHECK)
  1098. u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
  1099. $(call if_changed,mkimage)
  1100. u-boot.sha1: u-boot.bin
  1101. tools/ubsha1 u-boot.bin
  1102. u-boot.dis: u-boot
  1103. $(OBJDUMP) -d $< > $@
  1104. ifneq ($(CONFIG_SPL_PAYLOAD),)
  1105. SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
  1106. else
  1107. SPL_PAYLOAD := u-boot.bin
  1108. endif
  1109. SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
  1110. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  1111. --pad-to=$(CONFIG_SPL_PAD_TO)
  1112. u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
  1113. $(call if_changed,pad_cat)
  1114. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  1115. MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd
  1116. tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
  1117. $(call if_changed,mkimage)
  1118. idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
  1119. $(call if_changed,cat)
  1120. endif
  1121. ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
  1122. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  1123. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  1124. $(call if_changed,mkimage)
  1125. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1126. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  1127. $(call if_changed,objcopy)
  1128. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1129. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  1130. $(call if_changed,objcopy)
  1131. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  1132. $(call if_changed,cat)
  1133. CLEAN_FILES += lpc32xx-*
  1134. endif
  1135. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  1136. --pad-to=$(CONFIG_TPL_PAD_TO)
  1137. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  1138. $(call if_changed,pad_cat)
  1139. SPL: spl/u-boot-spl.bin FORCE
  1140. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1141. ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
  1142. ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
  1143. u-boot.cnt: u-boot.bin FORCE
  1144. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1145. flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
  1146. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1147. else
  1148. flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
  1149. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1150. endif
  1151. endif
  1152. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
  1153. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1154. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  1155. u-boot.ubl: u-boot-with-spl.bin FORCE
  1156. $(call if_changed,mkimage)
  1157. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  1158. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  1159. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  1160. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  1161. $(call if_changed,mkimage)
  1162. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1163. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  1164. $(call if_changed,pad_cat)
  1165. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  1166. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  1167. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  1168. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  1169. # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
  1170. # Both images are created using mkimage (crc etc), so that the ROM
  1171. # bootloader can check its integrity. Padding needs to be done to the
  1172. # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
  1173. # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
  1174. # The resulting image containing both U-Boot images is called u-boot.spr
  1175. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  1176. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  1177. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  1178. $(call if_changed,mkimage)
  1179. OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1180. --gap-fill=0xff
  1181. u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
  1182. $(call if_changed,pad_cat)
  1183. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  1184. quiet_cmd_socboot = SOCBOOT $@
  1185. cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1186. spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1187. u-boot.img > $@ || rm -f $@
  1188. u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
  1189. $(call if_changed,socboot)
  1190. endif
  1191. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1192. u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
  1193. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
  1194. $(call if_changed,binman)
  1195. ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
  1196. OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
  1197. u-boot-br.bin: u-boot FORCE
  1198. $(call if_changed,objcopy)
  1199. endif
  1200. endif
  1201. # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
  1202. # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
  1203. # the middle. This is handled by binman based on an image description in the
  1204. # board's device tree.
  1205. ifneq ($(CONFIG_X86_RESET_VECTOR),)
  1206. rom: u-boot.rom FORCE
  1207. refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
  1208. $(call if_changed,copy)
  1209. quiet_cmd_ldr = LD $@
  1210. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  1211. $(filter-out FORCE,$^) -o $@
  1212. u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
  1213. $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
  1214. $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
  1215. $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
  1216. $(call if_changed,binman)
  1217. OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
  1218. u-boot-x86-16bit.bin: u-boot FORCE
  1219. $(call if_changed,objcopy)
  1220. endif
  1221. ifneq ($(CONFIG_ARCH_SUNXI),)
  1222. ifeq ($(CONFIG_ARM64),)
  1223. u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
  1224. $(call if_changed,binman)
  1225. else
  1226. u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
  1227. $(call if_changed,cat)
  1228. endif
  1229. endif
  1230. ifneq ($(CONFIG_TEGRA),)
  1231. ifneq ($(CONFIG_BINMAN),)
  1232. # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
  1233. %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
  1234. spl/%-spl %.bin FORCE
  1235. $(call if_changed,binman)
  1236. else
  1237. OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  1238. u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
  1239. $(call if_changed,pad_cat)
  1240. OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  1241. u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
  1242. $(call if_changed,pad_cat)
  1243. u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
  1244. $(call if_changed,copy)
  1245. endif # binman
  1246. endif
  1247. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  1248. u-boot-app.efi: u-boot FORCE
  1249. $(call if_changed,zobjcopy)
  1250. u-boot.bin.o: u-boot.bin FORCE
  1251. $(call if_changed,efipayload)
  1252. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  1253. $(call if_changed_dep,cpp_lds)
  1254. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  1255. quiet_cmd_u-boot_payload ?= LD $@
  1256. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  1257. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  1258. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  1259. $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
  1260. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  1261. $(call if_changed,u-boot_payload)
  1262. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  1263. u-boot-payload.efi: u-boot-payload FORCE
  1264. $(call if_changed,zobjcopy)
  1265. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  1266. $(call if_changed,cat)
  1267. #Add a target to create boot binary having SPL binary in PBI format
  1268. #concatenated with u-boot binary. It is need by PowerPC SoC having
  1269. #internal SRAM <= 512KB.
  1270. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1271. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  1272. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  1273. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  1274. $(call if_changed,mkimage)
  1275. ifeq ($(ARCH),arm)
  1276. UBOOT_BINLOAD := u-boot.img
  1277. else
  1278. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1279. UBOOT_BINLOAD := u-boot-with-dtb.bin
  1280. else
  1281. UBOOT_BINLOAD := u-boot.bin
  1282. endif
  1283. endif
  1284. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1285. --gap-fill=0xff
  1286. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  1287. $(call if_changed,pad_cat)
  1288. # PPC4xx needs the SPL at the end of the image, since the reset vector
  1289. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  1290. # and need to introduce a new build target with the full blown U-Boot
  1291. # at the start padded up to the start of the SPL image. And then concat
  1292. # the SPL image to the end.
  1293. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  1294. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  1295. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  1296. $(call if_changed,pad_cat)
  1297. # Create a new ELF from a raw binary file.
  1298. ifndef PLATFORM_ELFENTRY
  1299. PLATFORM_ELFENTRY = "_start"
  1300. endif
  1301. quiet_cmd_u-boot-elf ?= LD $@
  1302. cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
  1303. --defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
  1304. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  1305. u-boot.elf: u-boot.bin
  1306. $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
  1307. $(call if_changed,u-boot-elf)
  1308. # MediaTek's ARM-based u-boot needs a header to contains its load address
  1309. # which is parsed by the BootROM.
  1310. # If the SPL build is enabled, the header will be added to the spl binary,
  1311. # and the spl binary and the u-boot.img will be combined into one file.
  1312. # Otherwise the header will be added to the u-boot.bin directly.
  1313. ifeq ($(CONFIG_SPL),y)
  1314. spl/u-boot-spl-mtk.bin: spl/u-boot-spl
  1315. u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
  1316. $(call if_changed,binman)
  1317. else
  1318. MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
  1319. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1320. -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
  1321. u-boot-mtk.bin: u-boot.bin FORCE
  1322. $(call if_changed,mkimage)
  1323. endif
  1324. ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
  1325. # Rule to link u-boot
  1326. # May be overridden by arch/$(ARCH)/config.mk
  1327. quiet_cmd_u-boot__ ?= LD $@
  1328. cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  1329. -T u-boot.lds $(u-boot-init) \
  1330. --start-group $(u-boot-main) --end-group \
  1331. $(PLATFORM_LIBS) -Map u-boot.map; \
  1332. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1333. quiet_cmd_smap = GEN common/system_map.o
  1334. cmd_smap = \
  1335. smap=`$(call SYSTEM_MAP,u-boot) | \
  1336. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  1337. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  1338. -c $(srctree)/common/system_map.c -o common/system_map.o
  1339. u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
  1340. +$(call if_changed,u-boot__)
  1341. ifeq ($(CONFIG_KALLSYMS),y)
  1342. $(call cmd,smap)
  1343. $(call cmd,u-boot__) common/system_map.o
  1344. endif
  1345. ifeq ($(CONFIG_RISCV),y)
  1346. @tools/prelink-riscv $@ 0
  1347. endif
  1348. quiet_cmd_sym ?= SYM $@
  1349. cmd_sym ?= $(OBJDUMP) -t $< > $@
  1350. u-boot.sym: u-boot FORCE
  1351. $(call if_changed,sym)
  1352. # The actual objects are generated when descending,
  1353. # make sure no implicit rule kicks in
  1354. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  1355. # Handle descending into subdirectories listed in $(vmlinux-dirs)
  1356. # Preset locale variables to speed up the build process. Limit locale
  1357. # tweaks to this spot to avoid wrong language settings when running
  1358. # make menuconfig etc.
  1359. # Error messages still appears in the original language
  1360. PHONY += $(u-boot-dirs)
  1361. $(u-boot-dirs): prepare scripts
  1362. $(Q)$(MAKE) $(build)=$@
  1363. tools: prepare
  1364. # The "tools" are needed early
  1365. $(filter-out tools, $(u-boot-dirs)): tools
  1366. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  1367. # is "yes"), so compile examples after U-Boot is compiled.
  1368. examples: $(filter-out examples, $(u-boot-dirs))
  1369. define filechk_uboot.release
  1370. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1371. endef
  1372. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  1373. include/config/uboot.release: include/config/auto.conf FORCE
  1374. $(call filechk,uboot.release)
  1375. # Things we need to do before we recursively start building the kernel
  1376. # or the modules are listed in "prepare".
  1377. # A multi level approach is used. prepareN is processed before prepareN-1.
  1378. # archprepare is used in arch Makefiles and when processed asm symlink,
  1379. # version.h and scripts_basic is processed / created.
  1380. # Listed in dependency order
  1381. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1382. # prepare3 is used to check if we are building in a separate output directory,
  1383. # and if so do:
  1384. # 1) Check that make has not been executed in the kernel src $(srctree)
  1385. prepare3: include/config/uboot.release
  1386. ifneq ($(KBUILD_SRC),)
  1387. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1388. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1389. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1390. echo >&2 " in the '$(srctree)' directory.";\
  1391. /bin/false; \
  1392. fi;
  1393. endif
  1394. # prepare2 creates a makefile if using a separate output directory
  1395. prepare2: prepare3 outputmakefile cfg
  1396. prepare1: prepare2 $(version_h) $(timestamp_h) \
  1397. include/config/auto.conf
  1398. ifeq ($(wildcard $(LDSCRIPT)),)
  1399. @echo >&2 " Could not find linker script."
  1400. @/bin/false
  1401. endif
  1402. ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
  1403. prepare1: $(defaultenv_h)
  1404. endif
  1405. archprepare: prepare1 scripts_basic
  1406. prepare0: archprepare FORCE
  1407. $(Q)$(MAKE) $(build)=.
  1408. # All the preparing..
  1409. prepare: prepare0
  1410. # Generate some files
  1411. # ---------------------------------------------------------------------------
  1412. define filechk_version.h
  1413. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1414. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1415. echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
  1416. echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
  1417. endef
  1418. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1419. # The BSD date on the other hand behaves different and would produce errors
  1420. # with the misused '-d' switch. Respect that and search a working date with
  1421. # well known pre- and suffixes for the GNU variant of date.
  1422. define filechk_timestamp.h
  1423. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1424. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1425. DATE=""; \
  1426. for date in gdate date.gnu date; do \
  1427. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1428. done; \
  1429. if test -n "$${DATE}"; then \
  1430. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1431. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1432. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1433. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1434. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1435. else \
  1436. return 42; \
  1437. fi; \
  1438. else \
  1439. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1440. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1441. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1442. LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1443. LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1444. fi)
  1445. endef
  1446. define filechk_defaultenv.h
  1447. (grep -v '^#' | \
  1448. grep -v '^$$' | \
  1449. tr '\n' '\0' | \
  1450. sed -e 's/\\\x0/\n/g' | \
  1451. xxd -i ; echo ", 0x00" ; )
  1452. endef
  1453. $(version_h): include/config/uboot.release FORCE
  1454. $(call filechk,version.h)
  1455. $(timestamp_h): $(srctree)/Makefile FORCE
  1456. $(call filechk,timestamp.h)
  1457. $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
  1458. $(call filechk,defaultenv.h)
  1459. # ---------------------------------------------------------------------------
  1460. quiet_cmd_cpp_lds = LDS $@
  1461. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
  1462. -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
  1463. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1464. $(call if_changed_dep,cpp_lds)
  1465. spl/u-boot-spl.bin: spl/u-boot-spl
  1466. @:
  1467. $(SPL_SIZE_CHECK)
  1468. spl/u-boot-spl: tools prepare \
  1469. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
  1470. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
  1471. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1472. spl/sunxi-spl.bin: spl/u-boot-spl
  1473. @:
  1474. spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
  1475. @:
  1476. spl/u-boot-spl.sfp: spl/u-boot-spl
  1477. @:
  1478. spl/boot.bin: spl/u-boot-spl
  1479. @:
  1480. tpl/u-boot-tpl.bin: tools prepare \
  1481. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
  1482. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1483. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1484. FIND := find
  1485. FINDFLAGS := -L
  1486. tags ctags:
  1487. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1488. -name '*.[chS]' -print`
  1489. ln -s ctags tags
  1490. etags:
  1491. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1492. -name '*.[chS]' -print`
  1493. cscope:
  1494. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1495. cscope.files
  1496. cscope -b -q -k
  1497. SYSTEM_MAP = \
  1498. $(NM) $1 | \
  1499. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1500. LC_ALL=C sort
  1501. System.map: u-boot
  1502. @$(call SYSTEM_MAP,$<) > $@
  1503. #########################################################################
  1504. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1505. # R_AARCH64_RELATIVE (64-bit).
  1506. checkarmreloc: u-boot
  1507. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1508. grep R_A | sort -u`"; \
  1509. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1510. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1511. echo "$< contains unexpected relocations: $$RELOC"; \
  1512. false; \
  1513. fi
  1514. envtools: scripts_basic $(version_h) $(timestamp_h)
  1515. $(Q)$(MAKE) $(build)=tools/env
  1516. tools-only: export TOOLS_ONLY=y
  1517. tools-only: scripts_basic $(version_h) $(timestamp_h)
  1518. $(Q)$(MAKE) $(build)=tools
  1519. tools-all: export HOST_TOOLS_ALL=y
  1520. tools-all: envtools tools ;
  1521. cross_tools: export CROSS_BUILD_TOOLS=y
  1522. cross_tools: tools ;
  1523. .PHONY : CHANGELOG
  1524. CHANGELOG:
  1525. git log --no-merges U-Boot-1_1_5.. | \
  1526. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1527. #########################################################################
  1528. ###
  1529. # Cleaning is done on three levels.
  1530. # make clean Delete most generated files
  1531. # Leave enough to build external modules
  1532. # make mrproper Delete the current configuration, and all generated files
  1533. # make distclean Remove editor backup files, patch leftover files and the like
  1534. # Directories & files removed with 'make clean'
  1535. CLEAN_DIRS += $(MODVERDIR) \
  1536. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1537. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1538. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
  1539. boot* u-boot* MLO* SPL System.map fit-dtb.blob*
  1540. # Directories & files removed with 'make mrproper'
  1541. MRPROPER_DIRS += include/config include/generated spl tpl \
  1542. .tmp_objdiff
  1543. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1544. ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
  1545. drivers/video/fonts/*.S
  1546. # clean - Delete most, but leave enough to build external modules
  1547. #
  1548. clean: rm-dirs := $(CLEAN_DIRS)
  1549. clean: rm-files := $(CLEAN_FILES)
  1550. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1551. clean-dirs := $(addprefix _clean_, $(clean-dirs))
  1552. PHONY += $(clean-dirs) clean archclean
  1553. $(clean-dirs):
  1554. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1555. clean: $(clean-dirs)
  1556. $(call cmd,rmdirs)
  1557. $(call cmd,rmfiles)
  1558. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1559. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1560. -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
  1561. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1562. -o -name '*.lex.c' -o -name '*.tab.[ch]' \
  1563. -o -name '*.symtypes' -o -name 'modules.order' \
  1564. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1565. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1566. -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
  1567. -type f -print | xargs rm -f \
  1568. bl31.c bl31.elf bl31_*.bin image.map tispl.bin*
  1569. # mrproper - Delete all generated files, including .config
  1570. #
  1571. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1572. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1573. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1574. PHONY += $(mrproper-dirs) mrproper archmrproper
  1575. $(mrproper-dirs):
  1576. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1577. mrproper: clean $(mrproper-dirs)
  1578. $(call cmd,rmdirs)
  1579. $(call cmd,rmfiles)
  1580. @rm -f arch/*/include/asm/arch
  1581. # distclean
  1582. #
  1583. PHONY += distclean
  1584. distclean: mrproper
  1585. @find $(srctree) $(RCS_FIND_IGNORE) \
  1586. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1587. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1588. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1589. -o -name '*.pyc' \) \
  1590. -type f -print | xargs rm -f
  1591. @rm -f boards.cfg CHANGELOG
  1592. backup:
  1593. F=`basename $(srctree)` ; cd .. ; \
  1594. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1595. help:
  1596. @echo 'Cleaning targets:'
  1597. @echo ' clean - Remove most generated files but keep the config'
  1598. @echo ' mrproper - Remove all generated files + config + various backup files'
  1599. @echo ' distclean - mrproper + remove editor backup and patch files'
  1600. @echo ''
  1601. @echo 'Configuration targets:'
  1602. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1603. @echo ''
  1604. @echo 'Test targets:'
  1605. @echo ''
  1606. @echo ' check - Run all automated tests that use sandbox'
  1607. @echo ' qcheck - Run quick automated tests that use sandbox'
  1608. @echo ''
  1609. @echo 'Other generic targets:'
  1610. @echo ' all - Build all necessary images depending on configuration'
  1611. @echo ' tests - Build U-Boot for sandbox and run tests'
  1612. @echo '* u-boot - Build the bare u-boot'
  1613. @echo ' dir/ - Build all files in dir and below'
  1614. @echo ' dir/file.[oisS] - Build specified target only'
  1615. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1616. @echo ' (requires a recent binutils and recent build (System.map))'
  1617. @echo ' tags/ctags - Generate ctags file for editors'
  1618. @echo ' etags - Generate etags file for editors'
  1619. @echo ' cscope - Generate cscope index'
  1620. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1621. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1622. @echo " cfg - Don't build, just create the .cfg files"
  1623. @echo " envtools - Build only the target-side environment tools"
  1624. @echo ''
  1625. @echo 'Static analysers'
  1626. @echo ' checkstack - Generate a list of stack hogs'
  1627. @echo ' coccicheck - Execute static code analysis with Coccinelle'
  1628. @echo ''
  1629. @echo 'Documentation targets:'
  1630. @$(MAKE) -f $(srctree)/doc/Makefile dochelp
  1631. @echo ''
  1632. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1633. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1634. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1635. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1636. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1637. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1638. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1639. @echo ' 1: warnings which may be relevant and do not occur too often'
  1640. @echo ' 2: warnings which occur quite often but may still be relevant'
  1641. @echo ' 3: more obscure warnings, can most likely be ignored'
  1642. @echo ' Multiple levels can be combined with W=12 or W=123'
  1643. @echo ''
  1644. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1645. @echo 'For further info see the ./README file'
  1646. tests check:
  1647. $(srctree)/test/run
  1648. qcheck:
  1649. $(srctree)/test/run quick
  1650. # Documentation targets
  1651. # ---------------------------------------------------------------------------
  1652. DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
  1653. linkcheckdocs dochelp refcheckdocs
  1654. PHONY += $(DOC_TARGETS)
  1655. $(DOC_TARGETS): scripts_basic FORCE
  1656. $(Q)$(MAKE) $(build)=doc $@
  1657. endif #ifeq ($(config-targets),1)
  1658. endif #ifeq ($(mixed-targets),1)
  1659. PHONY += checkstack ubootrelease ubootversion
  1660. checkstack:
  1661. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1662. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1663. ubootrelease:
  1664. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1665. ubootversion:
  1666. @echo $(UBOOTVERSION)
  1667. # Single targets
  1668. # ---------------------------------------------------------------------------
  1669. # Single targets are compatible with:
  1670. # - build with mixed source and output
  1671. # - build with separate output dir 'make O=...'
  1672. # - external modules
  1673. #
  1674. # target-dir => where to store outputfile
  1675. # build-dir => directory in kernel source tree to use
  1676. ifeq ($(KBUILD_EXTMOD),)
  1677. build-dir = $(patsubst %/,%,$(dir $@))
  1678. target-dir = $(dir $@)
  1679. else
  1680. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1681. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1682. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1683. endif
  1684. %.s: %.c prepare scripts FORCE
  1685. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1686. %.i: %.c prepare scripts FORCE
  1687. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1688. %.o: %.c prepare scripts FORCE
  1689. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1690. %.lst: %.c prepare scripts FORCE
  1691. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1692. %.s: %.S prepare scripts FORCE
  1693. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1694. %.o: %.S prepare scripts FORCE
  1695. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1696. %.symtypes: %.c prepare scripts FORCE
  1697. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1698. # Modules
  1699. /: prepare scripts FORCE
  1700. $(cmd_crmodverdir)
  1701. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1702. $(build)=$(build-dir)
  1703. %/: prepare scripts FORCE
  1704. $(cmd_crmodverdir)
  1705. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1706. $(build)=$(build-dir)
  1707. %.ko: prepare scripts FORCE
  1708. $(cmd_crmodverdir)
  1709. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1710. $(build)=$(build-dir) $(@:.ko=.o)
  1711. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1712. quiet_cmd_genenv = GENENV $@
  1713. cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
  1714. sed --in-place -e 's/\x00/\x0A/g' $@
  1715. u-boot-initial-env: u-boot.bin
  1716. $(call if_changed,genenv)
  1717. # Consistency checks
  1718. # ---------------------------------------------------------------------------
  1719. PHONY += coccicheck
  1720. coccicheck:
  1721. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
  1722. # FIXME Should go into a make.lib or something
  1723. # ===========================================================================
  1724. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1725. cmd_rmdirs = rm -rf $(rm-dirs)
  1726. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1727. cmd_rmfiles = rm -f $(rm-files)
  1728. # read all saved command lines
  1729. targets := $(wildcard $(sort $(targets)))
  1730. cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
  1731. ifneq ($(cmd_files),)
  1732. $(cmd_files): ; # Do not try to update included dependency files
  1733. include $(cmd_files)
  1734. endif
  1735. endif # skip-makefile
  1736. PHONY += FORCE
  1737. FORCE:
  1738. # Declare the contents of the .PHONY variable as phony. We keep that
  1739. # information in a variable so we can use it in if_changed and friends.
  1740. .PHONY: $(PHONY)