Makefile 52 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621
  1. #
  2. # SPDX-License-Identifier: GPL-2.0+
  3. #
  4. VERSION = 2016
  5. PATCHLEVEL = 07
  6. SUBLEVEL =
  7. EXTRAVERSION = -rc1
  8. NAME =
  9. # *DOCUMENTATION*
  10. # To see a list of typical targets execute "make help"
  11. # More info can be located in ./README
  12. # Comments in this file are targeted only to the developer, do not
  13. # expect to learn how to build the kernel reading this file.
  14. # o Do not use make's built-in rules and variables
  15. # (this increases performance and avoids hard-to-debug behaviour);
  16. # o Look for make include files relative to root of kernel src
  17. MAKEFLAGS += -rR --include-dir=$(CURDIR)
  18. # Avoid funny character set dependencies
  19. unexport LC_ALL
  20. LC_COLLATE=C
  21. LC_NUMERIC=C
  22. export LC_COLLATE LC_NUMERIC
  23. # Avoid interference with shell env settings
  24. unexport GREP_OPTIONS
  25. # We are using a recursive build, so we need to do a little thinking
  26. # to get the ordering right.
  27. #
  28. # Most importantly: sub-Makefiles should only ever modify files in
  29. # their own directory. If in some directory we have a dependency on
  30. # a file in another dir (which doesn't happen often, but it's often
  31. # unavoidable when linking the built-in.o targets which finally
  32. # turn into vmlinux), we will call a sub make in that other dir, and
  33. # after that we are sure that everything which is in that other dir
  34. # is now up to date.
  35. #
  36. # The only cases where we need to modify files which have global
  37. # effects are thus separated out and done before the recursive
  38. # descending is started. They are now explicitly listed as the
  39. # prepare rule.
  40. # Beautify output
  41. # ---------------------------------------------------------------------------
  42. #
  43. # Normally, we echo the whole command before executing it. By making
  44. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  45. # $(quiet) to choose other forms of output instead, e.g.
  46. #
  47. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  48. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  49. #
  50. # If $(quiet) is empty, the whole command will be printed.
  51. # If it is set to "quiet_", only the short version will be printed.
  52. # If it is set to "silent_", nothing will be printed at all, since
  53. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  54. #
  55. # A simple variant is to prefix commands with $(Q) - that's useful
  56. # for commands that shall be hidden in non-verbose mode.
  57. #
  58. # $(Q)ln $@ :<
  59. #
  60. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  61. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  62. #
  63. # To put more focus on warnings, be less verbose as default
  64. # Use 'make V=1' to see the full commands
  65. ifeq ("$(origin V)", "command line")
  66. KBUILD_VERBOSE = $(V)
  67. endif
  68. ifndef KBUILD_VERBOSE
  69. KBUILD_VERBOSE = 0
  70. endif
  71. ifeq ($(KBUILD_VERBOSE),1)
  72. quiet =
  73. Q =
  74. else
  75. quiet=quiet_
  76. Q = @
  77. endif
  78. # If the user is running make -s (silent mode), suppress echoing of
  79. # commands
  80. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  81. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  82. quiet=silent_
  83. endif
  84. else # make-3.8x
  85. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  86. quiet=silent_
  87. endif
  88. endif
  89. export quiet Q KBUILD_VERBOSE
  90. # kbuild supports saving output files in a separate directory.
  91. # To locate output files in a separate directory two syntaxes are supported.
  92. # In both cases the working directory must be the root of the kernel src.
  93. # 1) O=
  94. # Use "make O=dir/to/store/output/files/"
  95. #
  96. # 2) Set KBUILD_OUTPUT
  97. # Set the environment variable KBUILD_OUTPUT to point to the directory
  98. # where the output files shall be placed.
  99. # export KBUILD_OUTPUT=dir/to/store/output/files/
  100. # make
  101. #
  102. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  103. # variable.
  104. # KBUILD_SRC is set on invocation of make in OBJ directory
  105. # KBUILD_SRC is not intended to be used by the regular user (for now)
  106. ifeq ($(KBUILD_SRC),)
  107. # OK, Make called in directory where kernel src resides
  108. # Do we want to locate output files in a separate directory?
  109. ifeq ("$(origin O)", "command line")
  110. KBUILD_OUTPUT := $(O)
  111. endif
  112. # That's our default target when none is given on the command line
  113. PHONY := _all
  114. _all:
  115. # Cancel implicit rules on top Makefile
  116. $(CURDIR)/Makefile Makefile: ;
  117. ifneq ($(KBUILD_OUTPUT),)
  118. # Invoke a second make in the output directory, passing relevant variables
  119. # check that the output directory actually exists
  120. saved-output := $(KBUILD_OUTPUT)
  121. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  122. && /bin/pwd)
  123. $(if $(KBUILD_OUTPUT),, \
  124. $(error failed to create output directory "$(saved-output)"))
  125. PHONY += $(MAKECMDGOALS) sub-make
  126. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  127. @:
  128. sub-make: FORCE
  129. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  130. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  131. # Leave processing to above invocation of make
  132. skip-makefile := 1
  133. endif # ifneq ($(KBUILD_OUTPUT),)
  134. endif # ifeq ($(KBUILD_SRC),)
  135. # We process the rest of the Makefile if this is the final invocation of make
  136. ifeq ($(skip-makefile),)
  137. # Do not print "Entering directory ...",
  138. # but we want to display it when entering to the output directory
  139. # so that IDEs/editors are able to understand relative filenames.
  140. MAKEFLAGS += --no-print-directory
  141. # Call a source code checker (by default, "sparse") as part of the
  142. # C compilation.
  143. #
  144. # Use 'make C=1' to enable checking of only re-compiled files.
  145. # Use 'make C=2' to enable checking of *all* source files, regardless
  146. # of whether they are re-compiled or not.
  147. #
  148. # See the file "Documentation/sparse.txt" for more details, including
  149. # where to get the "sparse" utility.
  150. ifeq ("$(origin C)", "command line")
  151. KBUILD_CHECKSRC = $(C)
  152. endif
  153. ifndef KBUILD_CHECKSRC
  154. KBUILD_CHECKSRC = 0
  155. endif
  156. # Use make M=dir to specify directory of external module to build
  157. # Old syntax make ... SUBDIRS=$PWD is still supported
  158. # Setting the environment variable KBUILD_EXTMOD take precedence
  159. ifdef SUBDIRS
  160. KBUILD_EXTMOD ?= $(SUBDIRS)
  161. endif
  162. ifeq ("$(origin M)", "command line")
  163. KBUILD_EXTMOD := $(M)
  164. endif
  165. # If building an external module we do not care about the all: rule
  166. # but instead _all depend on modules
  167. PHONY += all
  168. ifeq ($(KBUILD_EXTMOD),)
  169. _all: all
  170. else
  171. _all: modules
  172. endif
  173. ifeq ($(KBUILD_SRC),)
  174. # building in the source tree
  175. srctree := .
  176. else
  177. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  178. # building in a subdirectory of the source tree
  179. srctree := ..
  180. else
  181. srctree := $(KBUILD_SRC)
  182. endif
  183. endif
  184. objtree := .
  185. src := $(srctree)
  186. obj := $(objtree)
  187. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  188. export srctree objtree VPATH
  189. # Make sure CDPATH settings don't interfere
  190. unexport CDPATH
  191. #########################################################################
  192. HOSTARCH := $(shell uname -m | \
  193. sed -e s/i.86/x86/ \
  194. -e s/sun4u/sparc64/ \
  195. -e s/arm.*/arm/ \
  196. -e s/sa110/arm/ \
  197. -e s/ppc64/powerpc/ \
  198. -e s/ppc/powerpc/ \
  199. -e s/macppc/powerpc/\
  200. -e s/sh.*/sh/)
  201. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  202. sed -e 's/\(cygwin\).*/cygwin/')
  203. export HOSTARCH HOSTOS
  204. #########################################################################
  205. # set default to nothing for native builds
  206. ifeq ($(HOSTARCH),$(ARCH))
  207. CROSS_COMPILE ?=
  208. endif
  209. KCONFIG_CONFIG ?= .config
  210. export KCONFIG_CONFIG
  211. # SHELL used by kbuild
  212. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  213. else if [ -x /bin/bash ]; then echo /bin/bash; \
  214. else echo sh; fi ; fi)
  215. HOSTCC = cc
  216. HOSTCXX = c++
  217. HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
  218. HOSTCXXFLAGS = -O2
  219. ifeq ($(HOSTOS),cygwin)
  220. HOSTCFLAGS += -ansi
  221. endif
  222. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  223. # generates numerous errors and warnings. We want to bypass it
  224. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  225. # option to the compiler. Note that the -traditional-cpp flag
  226. # DOES NOT have the same semantics as GNU C's flag, all it does
  227. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  228. #
  229. # Apple's linker is similar, thanks to the new 2 stage linking
  230. # multiple symbol definitions are treated as errors, hence the
  231. # -multiply_defined suppress option to turn off this error.
  232. #
  233. ifeq ($(HOSTOS),darwin)
  234. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  235. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  236. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  237. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  238. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  239. # Snow Leopards build environment has no longer restrictions as described above
  240. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  241. HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  242. HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  243. # since Lion (10.7) ASLR is on by default, but we use linker generated lists
  244. # in some host tools which is a problem then ... so disable ASLR for these
  245. # tools
  246. HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
  247. endif
  248. # Decide whether to build built-in, modular, or both.
  249. # Normally, just do built-in.
  250. KBUILD_MODULES :=
  251. KBUILD_BUILTIN := 1
  252. # If we have only "make modules", don't compile built-in objects.
  253. # When we're building modules with modversions, we need to consider
  254. # the built-in objects during the descend as well, in order to
  255. # make sure the checksums are up to date before we record them.
  256. ifeq ($(MAKECMDGOALS),modules)
  257. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  258. endif
  259. # If we have "make <whatever> modules", compile modules
  260. # in addition to whatever we do anyway.
  261. # Just "make" or "make all" shall build modules as well
  262. # U-Boot does not need modules
  263. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  264. # KBUILD_MODULES := 1
  265. #endif
  266. #ifeq ($(MAKECMDGOALS),)
  267. # KBUILD_MODULES := 1
  268. #endif
  269. export KBUILD_MODULES KBUILD_BUILTIN
  270. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  271. # We need some generic definitions (do not try to remake the file).
  272. scripts/Kbuild.include: ;
  273. include scripts/Kbuild.include
  274. # Make variables (CC, etc...)
  275. AS = $(CROSS_COMPILE)as
  276. # Always use GNU ld
  277. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  278. LD = $(CROSS_COMPILE)ld.bfd
  279. else
  280. LD = $(CROSS_COMPILE)ld
  281. endif
  282. CC = $(CROSS_COMPILE)gcc
  283. CPP = $(CC) -E
  284. AR = $(CROSS_COMPILE)ar
  285. NM = $(CROSS_COMPILE)nm
  286. LDR = $(CROSS_COMPILE)ldr
  287. STRIP = $(CROSS_COMPILE)strip
  288. OBJCOPY = $(CROSS_COMPILE)objcopy
  289. OBJDUMP = $(CROSS_COMPILE)objdump
  290. AWK = awk
  291. PERL = perl
  292. PYTHON = python
  293. DTC = dtc
  294. CHECK = sparse
  295. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  296. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  297. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  298. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  299. -Wno-format-security \
  300. -fno-builtin -ffreestanding
  301. KBUILD_AFLAGS := -D__ASSEMBLY__
  302. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  303. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  304. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  305. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  306. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  307. export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
  308. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
  309. export MAKE AWK PERL PYTHON
  310. export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
  311. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
  312. export KBUILD_CFLAGS KBUILD_AFLAGS
  313. # When compiling out-of-tree modules, put MODVERDIR in the module
  314. # tree rather than in the kernel tree. The kernel tree might
  315. # even be read-only.
  316. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  317. # Files to ignore in find ... statements
  318. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  319. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  320. -prune -o
  321. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  322. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  323. # ===========================================================================
  324. # Rules shared between *config targets and build targets
  325. # Basic helpers built in scripts/
  326. PHONY += scripts_basic
  327. scripts_basic:
  328. $(Q)$(MAKE) $(build)=scripts/basic
  329. $(Q)rm -f .tmp_quiet_recordmcount
  330. # To avoid any implicit rule to kick in, define an empty command.
  331. scripts/basic/%: scripts_basic ;
  332. PHONY += outputmakefile
  333. # outputmakefile generates a Makefile in the output directory, if using a
  334. # separate output directory. This allows convenient use of make in the
  335. # output directory.
  336. outputmakefile:
  337. ifneq ($(KBUILD_SRC),)
  338. $(Q)ln -fsn $(srctree) source
  339. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
  340. $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
  341. endif
  342. # To make sure we do not include .config for any of the *config targets
  343. # catch them early, and hand them over to scripts/kconfig/Makefile
  344. # It is allowed to specify more targets when calling make, including
  345. # mixing *config targets and build targets.
  346. # For example 'make oldconfig all'.
  347. # Detect when mixed targets is specified, and make a second invocation
  348. # of make so .config is not included in this case either (for *config).
  349. version_h := include/generated/version_autogenerated.h
  350. timestamp_h := include/generated/timestamp_autogenerated.h
  351. no-dot-config-targets := clean clobber mrproper distclean \
  352. help %docs check% coccicheck \
  353. ubootversion backup
  354. config-targets := 0
  355. mixed-targets := 0
  356. dot-config := 1
  357. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  358. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  359. dot-config := 0
  360. endif
  361. endif
  362. ifeq ($(KBUILD_EXTMOD),)
  363. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  364. config-targets := 1
  365. ifneq ($(words $(MAKECMDGOALS)),1)
  366. mixed-targets := 1
  367. endif
  368. endif
  369. endif
  370. ifeq ($(mixed-targets),1)
  371. # ===========================================================================
  372. # We're called with mixed targets (*config and build targets).
  373. # Handle them one by one.
  374. PHONY += $(MAKECMDGOALS) __build_one_by_one
  375. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  376. @:
  377. __build_one_by_one:
  378. $(Q)set -e; \
  379. for i in $(MAKECMDGOALS); do \
  380. $(MAKE) -f $(srctree)/Makefile $$i; \
  381. done
  382. else
  383. ifeq ($(config-targets),1)
  384. # ===========================================================================
  385. # *config targets only - make sure prerequisites are updated, and descend
  386. # in scripts/kconfig to make the *config target
  387. KBUILD_DEFCONFIG := sandbox_defconfig
  388. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  389. config: scripts_basic outputmakefile FORCE
  390. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  391. %config: scripts_basic outputmakefile FORCE
  392. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  393. else
  394. # ===========================================================================
  395. # Build targets only - this includes vmlinux, arch specific targets, clean
  396. # targets and others. In general all targets except *config targets.
  397. ifeq ($(dot-config),1)
  398. # Read in config
  399. -include include/config/auto.conf
  400. # Read in dependencies to all Kconfig* files, make sure to run
  401. # oldconfig if changes are detected.
  402. -include include/config/auto.conf.cmd
  403. # To avoid any implicit rule to kick in, define an empty command
  404. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  405. # If .config is newer than include/config/auto.conf, someone tinkered
  406. # with it and forgot to run make oldconfig.
  407. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  408. # we execute the config step to be sure to catch updated Kconfig files
  409. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  410. $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
  411. @# If the following part fails, include/config/auto.conf should be
  412. @# deleted so "make silentoldconfig" will be re-run on the next build.
  413. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  414. { rm -f include/config/auto.conf; false; }
  415. @# include/config.h has been updated after "make silentoldconfig".
  416. @# We need to touch include/config/auto.conf so it gets newer
  417. @# than include/config.h.
  418. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  419. $(Q)touch include/config/auto.conf
  420. -include include/autoconf.mk
  421. -include include/autoconf.mk.dep
  422. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  423. # is up-to-date. When we switch to a different board configuration, old CONFIG
  424. # macros are still remaining in include/config/auto.conf. Without the following
  425. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  426. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  427. ifneq ($(wildcard include/config/auto.conf),)
  428. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  429. include/config/auto.conf)
  430. ifeq ($(autoconf_is_old),)
  431. include config.mk
  432. include arch/$(ARCH)/Makefile
  433. endif
  434. endif
  435. endif
  436. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  437. # that (or fail if absent). Otherwise, search for a linker script in a
  438. # standard location.
  439. ifndef LDSCRIPT
  440. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  441. ifdef CONFIG_SYS_LDSCRIPT
  442. # need to strip off double quotes
  443. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  444. endif
  445. endif
  446. # If there is no specified link script, we look in a number of places for it
  447. ifndef LDSCRIPT
  448. ifeq ($(wildcard $(LDSCRIPT)),)
  449. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  450. endif
  451. ifeq ($(wildcard $(LDSCRIPT)),)
  452. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  453. endif
  454. ifeq ($(wildcard $(LDSCRIPT)),)
  455. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  456. endif
  457. endif
  458. else
  459. # Dummy target needed, because used as prerequisite
  460. include/config/auto.conf: ;
  461. endif # $(dot-config)
  462. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  463. KBUILD_CFLAGS += -Os
  464. else
  465. KBUILD_CFLAGS += -O2
  466. endif
  467. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  468. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  469. KBUILD_CFLAGS += -g
  470. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  471. # option to the assembler.
  472. KBUILD_AFLAGS += -g
  473. # Report stack usage if supported
  474. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  475. KBUILD_CFLAGS += -fstack-usage
  476. endif
  477. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  478. # turn jbsr into jsr for m68k
  479. ifeq ($(ARCH),m68k)
  480. ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
  481. KBUILD_AFLAGS += -Wa,-gstabs,-S
  482. endif
  483. endif
  484. # Prohibit date/time macros, which would make the build non-deterministic
  485. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  486. include scripts/Makefile.extrawarn
  487. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  488. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  489. KBUILD_AFLAGS += $(KAFLAGS)
  490. KBUILD_CFLAGS += $(KCFLAGS)
  491. # Use UBOOTINCLUDE when you must reference the include/ directory.
  492. # Needed to be compatible with the O= option
  493. UBOOTINCLUDE := \
  494. -Iinclude \
  495. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  496. $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \
  497. -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
  498. -I$(srctree)/arch/$(ARCH)/include \
  499. -include $(srctree)/include/linux/kconfig.h
  500. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  501. CHECKFLAGS += $(NOSTDINC_FLAGS)
  502. # FIX ME
  503. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  504. $(NOSTDINC_FLAGS)
  505. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  506. #########################################################################
  507. # U-Boot objects....order is important (i.e. start must be first)
  508. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  509. libs-y += lib/
  510. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  511. libs-$(CONFIG_OF_EMBED) += dts/
  512. libs-y += fs/
  513. libs-y += net/
  514. libs-y += disk/
  515. libs-y += drivers/
  516. libs-y += drivers/dma/
  517. libs-y += drivers/gpio/
  518. libs-y += drivers/i2c/
  519. libs-y += drivers/mmc/
  520. libs-y += drivers/mtd/
  521. libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
  522. libs-y += drivers/mtd/onenand/
  523. libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
  524. libs-y += drivers/mtd/spi/
  525. libs-y += drivers/net/
  526. libs-y += drivers/net/phy/
  527. libs-y += drivers/pci/
  528. libs-y += drivers/power/ \
  529. drivers/power/fuel_gauge/ \
  530. drivers/power/mfd/ \
  531. drivers/power/pmic/ \
  532. drivers/power/battery/ \
  533. drivers/power/regulator/
  534. libs-y += drivers/spi/
  535. libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
  536. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  537. libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
  538. libs-y += drivers/serial/
  539. libs-y += drivers/usb/dwc3/
  540. libs-y += drivers/usb/common/
  541. libs-y += drivers/usb/emul/
  542. libs-y += drivers/usb/eth/
  543. libs-y += drivers/usb/gadget/
  544. libs-y += drivers/usb/gadget/udc/
  545. libs-y += drivers/usb/host/
  546. libs-y += drivers/usb/musb/
  547. libs-y += drivers/usb/musb-new/
  548. libs-y += drivers/usb/phy/
  549. libs-y += drivers/usb/ulpi/
  550. libs-y += cmd/
  551. libs-y += common/
  552. libs-$(CONFIG_API) += api/
  553. libs-$(CONFIG_HAS_POST) += post/
  554. libs-y += test/
  555. libs-y += test/dm/
  556. libs-$(CONFIG_UT_ENV) += test/env/
  557. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  558. libs-y := $(sort $(libs-y))
  559. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  560. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  561. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  562. u-boot-init := $(head-y)
  563. u-boot-main := $(libs-y)
  564. # Add GCC lib
  565. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  566. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  567. else
  568. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  569. endif
  570. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  571. export PLATFORM_LIBS
  572. export PLATFORM_LIBGCC
  573. # Special flags for CPP when processing the linker script.
  574. # Pass the version down so we can handle backwards compatibility
  575. # on the fly.
  576. LDPPFLAGS += \
  577. -include $(srctree)/include/u-boot/u-boot.lds.h \
  578. -DCPUDIR=$(CPUDIR) \
  579. $(shell $(LD) --version | \
  580. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  581. #########################################################################
  582. #########################################################################
  583. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  584. BOARD_SIZE_CHECK = \
  585. @actual=`wc -c $@ | awk '{print $$1}'`; \
  586. limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
  587. if test $$actual -gt $$limit; then \
  588. echo "$@ exceeds file size limit:" >&2 ; \
  589. echo " limit: $$limit bytes" >&2 ; \
  590. echo " actual: $$actual bytes" >&2 ; \
  591. echo " excess: $$((actual - limit)) bytes" >&2; \
  592. exit 1; \
  593. fi
  594. else
  595. BOARD_SIZE_CHECK =
  596. endif
  597. # Statically apply RELA-style relocations (currently arm64 only)
  598. ifneq ($(CONFIG_STATIC_RELA),)
  599. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  600. DO_STATIC_RELA = \
  601. start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  602. end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  603. tools/relocate-rela $(2) $(3) $$start $$end
  604. else
  605. DO_STATIC_RELA =
  606. endif
  607. # Always append ALL so that arch config.mk's can add custom ones
  608. ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map u-boot.cfg binary_size_check
  609. ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  610. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  611. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  612. else
  613. ifneq ($(CONFIG_SECURE_BOOT), y)
  614. # For Secure Boot The Image needs to be signed and Header must also
  615. # be included. So The image has to be built explicitly
  616. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  617. endif
  618. endif
  619. ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
  620. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  621. ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  622. ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  623. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  624. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  625. endif
  626. ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  627. ifneq ($(CONFIG_SPL_TARGET),)
  628. ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  629. endif
  630. ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
  631. ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
  632. ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  633. ifneq ($(BUILD_ROM),)
  634. ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
  635. endif
  636. # enable combined SPL/u-boot/dtb rules for tegra
  637. ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
  638. ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
  639. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
  640. endif
  641. # Add optional build target if defined in board/cpu/soc headers
  642. ifneq ($(CONFIG_BUILD_TARGET),)
  643. ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
  644. endif
  645. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  646. ifneq ($(CONFIG_SYS_TEXT_BASE),)
  647. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  648. endif
  649. # Normally we fill empty space with 0xff
  650. quiet_cmd_objcopy = OBJCOPY $@
  651. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  652. $(OBJCOPYFLAGS_$(@F)) $< $@
  653. # Provide a version which does not do this, for use by EFI
  654. quiet_cmd_zobjcopy = OBJCOPY $@
  655. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  656. quiet_cmd_efipayload = OBJCOPY $@
  657. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  658. quiet_cmd_mkimage = MKIMAGE $@
  659. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  660. $(if $(KBUILD_VERBOSE:1=), >/dev/null)
  661. quiet_cmd_cat = CAT $@
  662. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  663. append = cat $(filter-out $< $(PHONY), $^) >> $@
  664. quiet_cmd_pad_cat = CAT $@
  665. cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
  666. all: $(ALL-y)
  667. ifeq ($(CONFIG_DM_I2C_COMPAT),y)
  668. @echo "===================== WARNING ======================"
  669. @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
  670. @echo "(possibly in a subsequent patch in your series)"
  671. @echo "before sending patches to the mailing list."
  672. @echo "===================================================="
  673. endif
  674. PHONY += dtbs
  675. dtbs dts/dt.dtb: checkdtc u-boot
  676. $(Q)$(MAKE) $(build)=dts dtbs
  677. quiet_cmd_copy = COPY $@
  678. cmd_copy = cp $< $@
  679. ifeq ($(CONFIG_OF_SEPARATE),y)
  680. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  681. $(call if_changed,cat)
  682. u-boot.bin: u-boot-dtb.bin FORCE
  683. $(call if_changed,copy)
  684. else
  685. u-boot.bin: u-boot-nodtb.bin FORCE
  686. $(call if_changed,copy)
  687. endif
  688. %.imx: %.bin
  689. $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
  690. u-boot.dtb: dts/dt.dtb
  691. $(call cmd,copy)
  692. OBJCOPYFLAGS_u-boot.hex := -O ihex
  693. OBJCOPYFLAGS_u-boot.srec := -O srec
  694. u-boot.hex u-boot.srec: u-boot FORCE
  695. $(call if_changed,objcopy)
  696. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  697. $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
  698. binary_size_check: u-boot-nodtb.bin FORCE
  699. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  700. map_size=$(shell cat u-boot.map | \
  701. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  702. | sed 's/0X//g' \
  703. | bc); \
  704. if [ "" != "$$map_size" ]; then \
  705. if test $$map_size -ne $$file_size; then \
  706. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  707. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  708. exit 1; \
  709. fi \
  710. fi
  711. u-boot-nodtb.bin: u-boot FORCE
  712. $(call if_changed,objcopy)
  713. $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
  714. $(BOARD_SIZE_CHECK)
  715. u-boot.ldr: u-boot
  716. $(CREATE_LDR_ENV)
  717. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  718. $(BOARD_SIZE_CHECK)
  719. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  720. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  721. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  722. $(call if_changed,objcopy)
  723. #
  724. # U-Boot entry point, needed for booting of full-blown U-Boot
  725. # from the SPL U-Boot version.
  726. #
  727. ifndef CONFIG_SYS_UBOOT_START
  728. CONFIG_SYS_UBOOT_START := 0
  729. endif
  730. # Create a file containing the configuration options the image was built with
  731. quiet_cmd_cpp_cfg = CFG $@
  732. cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
  733. -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
  734. ifdef CONFIG_SPL_LOAD_FIT
  735. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  736. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  737. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  738. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
  739. else
  740. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  741. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  742. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  743. endif
  744. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  745. MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
  746. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  747. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
  748. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  749. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  750. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  751. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
  752. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
  753. $(call if_changed,mkimage)
  754. u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
  755. $(call if_changed,mkimage)
  756. u-boot.sha1: u-boot.bin
  757. tools/ubsha1 u-boot.bin
  758. u-boot.dis: u-boot
  759. $(OBJDUMP) -d $< > $@
  760. u-boot.cfg: include/config.h FORCE
  761. $(call if_changed,cpp_cfg)
  762. ifdef CONFIG_TPL
  763. SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
  764. else
  765. SPL_PAYLOAD := u-boot.bin
  766. endif
  767. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  768. --pad-to=$(CONFIG_SPL_PAD_TO)
  769. u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
  770. $(call if_changed,pad_cat)
  771. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  772. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  773. $(call if_changed,mkimage)
  774. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  775. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  776. $(call if_changed,objcopy)
  777. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  778. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  779. $(call if_changed,objcopy)
  780. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  781. $(call if_changed,cat)
  782. CLEAN_FILES += lpc32xx-*
  783. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  784. --pad-to=$(CONFIG_TPL_PAD_TO)
  785. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  786. $(call if_changed,pad_cat)
  787. SPL: spl/u-boot-spl.bin FORCE
  788. $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
  789. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
  790. $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
  791. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  792. u-boot.ubl: u-boot-with-spl.bin FORCE
  793. $(call if_changed,mkimage)
  794. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  795. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  796. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  797. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  798. $(call if_changed,mkimage)
  799. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  800. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  801. $(call if_changed,pad_cat)
  802. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  803. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  804. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  805. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  806. # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
  807. # Both images are created using mkimage (crc etc), so that the ROM
  808. # bootloader can check its integrity. Padding needs to be done to the
  809. # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
  810. # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
  811. # The resulting image containing both U-Boot images is called u-boot.spr
  812. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  813. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  814. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  815. $(call if_changed,mkimage)
  816. OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  817. --gap-fill=0xff
  818. u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
  819. $(call if_changed,pad_cat)
  820. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  821. quiet_cmd_socboot = SOCBOOT $@
  822. cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  823. spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  824. u-boot.img > $@ || rm -f $@
  825. u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
  826. $(call if_changed,socboot)
  827. endif
  828. # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
  829. # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
  830. # the middle.
  831. ifneq ($(CONFIG_X86_RESET_VECTOR),)
  832. rom: u-boot.rom FORCE
  833. IFDTOOL=$(objtree)/tools/ifdtool
  834. IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
  835. IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
  836. IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
  837. IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
  838. IFDTOOL_FLAGS += -C
  839. ifneq ($(CONFIG_HAVE_INTEL_ME),)
  840. IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
  841. IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
  842. endif
  843. ifneq ($(CONFIG_HAVE_MRC),)
  844. IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
  845. endif
  846. ifneq ($(CONFIG_HAVE_FSP),)
  847. IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
  848. endif
  849. ifneq ($(CONFIG_HAVE_CMC),)
  850. IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
  851. endif
  852. ifneq ($(CONFIG_HAVE_VGA_BIOS),)
  853. IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
  854. endif
  855. ifneq ($(CONFIG_HAVE_REFCODE),)
  856. IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
  857. endif
  858. quiet_cmd_ifdtool = IFDTOOL $@
  859. cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
  860. ifneq ($(CONFIG_HAVE_INTEL_ME),)
  861. cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
  862. endif
  863. cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
  864. cmd_ifdtool += mv u-boot.tmp $@
  865. refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
  866. $(call if_changed,copy)
  867. quiet_cmd_ldr = LD $@
  868. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  869. $(filter-out FORCE,$^) -o $@
  870. u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
  871. $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
  872. $(call if_changed,ifdtool)
  873. OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
  874. u-boot-x86-16bit.bin: u-boot FORCE
  875. $(call if_changed,objcopy)
  876. endif
  877. ifneq ($(CONFIG_SUNXI),)
  878. OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
  879. --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
  880. u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
  881. $(call if_changed,pad_cat)
  882. endif
  883. ifneq ($(CONFIG_TEGRA),)
  884. OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  885. u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
  886. $(call if_changed,pad_cat)
  887. OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  888. u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
  889. $(call if_changed,pad_cat)
  890. u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
  891. $(call if_changed,copy)
  892. endif
  893. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  894. u-boot-app.efi: u-boot FORCE
  895. $(call if_changed,zobjcopy)
  896. u-boot.bin.o: u-boot.bin FORCE
  897. $(call if_changed,efipayload)
  898. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  899. $(call if_changed_dep,cpp_lds)
  900. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  901. quiet_cmd_u-boot_payload ?= LD $@
  902. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  903. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  904. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  905. $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
  906. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  907. $(call if_changed,u-boot_payload)
  908. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  909. u-boot-payload.efi: u-boot-payload FORCE
  910. $(call if_changed,zobjcopy)
  911. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  912. $(call if_changed,cat)
  913. #Add a target to create boot binary having SPL binary in PBI format
  914. #concatenated with u-boot binary. It is need by PowerPC SoC having
  915. #internal SRAM <= 512KB.
  916. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  917. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  918. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  919. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  920. $(call if_changed,mkimage)
  921. ifeq ($(ARCH),arm)
  922. UBOOT_BINLOAD := u-boot.img
  923. else
  924. UBOOT_BINLOAD := u-boot.bin
  925. endif
  926. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  927. --gap-fill=0xff
  928. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  929. $(call if_changed,pad_cat)
  930. # PPC4xx needs the SPL at the end of the image, since the reset vector
  931. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  932. # and need to introduce a new build target with the full blown U-Boot
  933. # at the start padded up to the start of the SPL image. And then concat
  934. # the SPL image to the end.
  935. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  936. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  937. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  938. $(call if_changed,pad_cat)
  939. # Create a new ELF from a raw binary file. This is useful for arm64
  940. # where static relocation needs to be performed on the raw binary,
  941. # but certain simulators only accept an ELF file (but don't do the
  942. # relocation).
  943. # FIXME refactor dts/Makefile to share target/arch detection
  944. u-boot.elf: u-boot.bin
  945. @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
  946. $< u-boot-elf.o
  947. @$(LD) u-boot-elf.o -o $@ \
  948. --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
  949. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  950. # Rule to link u-boot
  951. # May be overridden by arch/$(ARCH)/config.mk
  952. quiet_cmd_u-boot__ ?= LD $@
  953. cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  954. -T u-boot.lds $(u-boot-init) \
  955. --start-group $(u-boot-main) --end-group \
  956. $(PLATFORM_LIBS) -Map u-boot.map
  957. quiet_cmd_smap = GEN common/system_map.o
  958. cmd_smap = \
  959. smap=`$(call SYSTEM_MAP,u-boot) | \
  960. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  961. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  962. -c $(srctree)/common/system_map.c -o common/system_map.o
  963. u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
  964. $(call if_changed,u-boot__)
  965. ifeq ($(CONFIG_KALLSYMS),y)
  966. $(call cmd,smap)
  967. $(call cmd,u-boot__) common/system_map.o
  968. endif
  969. quiet_cmd_sym ?= SYM $@
  970. cmd_sym ?= $(OBJDUMP) -t $< > $@
  971. u-boot.sym: u-boot FORCE
  972. $(call if_changed,sym)
  973. # The actual objects are generated when descending,
  974. # make sure no implicit rule kicks in
  975. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  976. # Handle descending into subdirectories listed in $(vmlinux-dirs)
  977. # Preset locale variables to speed up the build process. Limit locale
  978. # tweaks to this spot to avoid wrong language settings when running
  979. # make menuconfig etc.
  980. # Error messages still appears in the original language
  981. PHONY += $(u-boot-dirs)
  982. $(u-boot-dirs): prepare scripts
  983. $(Q)$(MAKE) $(build)=$@
  984. tools: prepare
  985. # The "tools" are needed early
  986. $(filter-out tools, $(u-boot-dirs)): tools
  987. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  988. # is "yes"), so compile examples after U-Boot is compiled.
  989. examples: $(filter-out examples, $(u-boot-dirs))
  990. define filechk_uboot.release
  991. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  992. endef
  993. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  994. include/config/uboot.release: include/config/auto.conf FORCE
  995. $(call filechk,uboot.release)
  996. # Things we need to do before we recursively start building the kernel
  997. # or the modules are listed in "prepare".
  998. # A multi level approach is used. prepareN is processed before prepareN-1.
  999. # archprepare is used in arch Makefiles and when processed asm symlink,
  1000. # version.h and scripts_basic is processed / created.
  1001. # Listed in dependency order
  1002. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1003. # prepare3 is used to check if we are building in a separate output directory,
  1004. # and if so do:
  1005. # 1) Check that make has not been executed in the kernel src $(srctree)
  1006. prepare3: include/config/uboot.release
  1007. ifneq ($(KBUILD_SRC),)
  1008. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1009. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1010. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1011. echo >&2 " in the '$(srctree)' directory.";\
  1012. /bin/false; \
  1013. fi;
  1014. endif
  1015. # prepare2 creates a makefile if using a separate output directory
  1016. prepare2: prepare3 outputmakefile
  1017. prepare1: prepare2 $(version_h) $(timestamp_h) \
  1018. include/config/auto.conf
  1019. ifeq ($(wildcard $(LDSCRIPT)),)
  1020. @echo >&2 " Could not find linker script."
  1021. @/bin/false
  1022. endif
  1023. archprepare: prepare1 scripts_basic
  1024. prepare0: archprepare FORCE
  1025. $(Q)$(MAKE) $(build)=.
  1026. # All the preparing..
  1027. prepare: prepare0
  1028. # Generate some files
  1029. # ---------------------------------------------------------------------------
  1030. define filechk_version.h
  1031. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1032. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1033. echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
  1034. echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
  1035. endef
  1036. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1037. # The BSD date on the other hand behaves different and would produce errors
  1038. # with the misused '-d' switch. Respect that and search a working date with
  1039. # well known pre- and suffixes for the GNU variant of date.
  1040. define filechk_timestamp.h
  1041. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1042. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1043. DATE=""; \
  1044. for date in gdate date.gnu date; do \
  1045. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1046. done; \
  1047. if test -n "$${DATE}"; then \
  1048. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1049. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1050. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1051. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1052. else \
  1053. return 42; \
  1054. fi; \
  1055. else \
  1056. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1057. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1058. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1059. LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1060. fi)
  1061. endef
  1062. $(version_h): include/config/uboot.release FORCE
  1063. $(call filechk,version.h)
  1064. $(timestamp_h): $(srctree)/Makefile FORCE
  1065. $(call filechk,timestamp.h)
  1066. # ---------------------------------------------------------------------------
  1067. quiet_cmd_cpp_lds = LDS $@
  1068. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
  1069. -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
  1070. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1071. $(call if_changed_dep,cpp_lds)
  1072. spl/u-boot-spl.bin: spl/u-boot-spl
  1073. @:
  1074. spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
  1075. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1076. spl/sunxi-spl.bin: spl/u-boot-spl
  1077. @:
  1078. spl/u-boot-spl.sfp: spl/u-boot-spl
  1079. @:
  1080. spl/boot.bin: spl/u-boot-spl
  1081. @:
  1082. tpl/u-boot-tpl.bin: tools prepare
  1083. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1084. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1085. FIND := find
  1086. FINDFLAGS := -L
  1087. tags ctags:
  1088. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1089. -name '*.[chS]' -print`
  1090. ln -s ctags tags
  1091. etags:
  1092. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1093. -name '*.[chS]' -print`
  1094. cscope:
  1095. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1096. cscope.files
  1097. cscope -b -q -k
  1098. SYSTEM_MAP = \
  1099. $(NM) $1 | \
  1100. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1101. LC_ALL=C sort
  1102. System.map: u-boot
  1103. @$(call SYSTEM_MAP,$<) > $@
  1104. checkdtc:
  1105. @if test $(call dtc-version) -lt 0104; then \
  1106. echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
  1107. false; \
  1108. fi
  1109. #########################################################################
  1110. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1111. # R_AARCH64_RELATIVE (64-bit).
  1112. checkarmreloc: u-boot
  1113. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1114. grep R_A | sort -u`"; \
  1115. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1116. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1117. echo "$< contains unexpected relocations: $$RELOC"; \
  1118. false; \
  1119. fi
  1120. env: scripts_basic
  1121. $(Q)$(MAKE) $(build)=tools/$@
  1122. tools-only: scripts_basic $(version_h) $(timestamp_h)
  1123. $(Q)$(MAKE) $(build)=tools
  1124. tools-all: export HOST_TOOLS_ALL=y
  1125. tools-all: env tools ;
  1126. cross_tools: export CROSS_BUILD_TOOLS=y
  1127. cross_tools: tools ;
  1128. .PHONY : CHANGELOG
  1129. CHANGELOG:
  1130. git log --no-merges U-Boot-1_1_5.. | \
  1131. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1132. #########################################################################
  1133. ###
  1134. # Cleaning is done on three levels.
  1135. # make clean Delete most generated files
  1136. # Leave enough to build external modules
  1137. # make mrproper Delete the current configuration, and all generated files
  1138. # make distclean Remove editor backup files, patch leftover files and the like
  1139. # Directories & files removed with 'make clean'
  1140. CLEAN_DIRS += $(MODVERDIR) \
  1141. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1142. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1143. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \
  1144. boot* u-boot* MLO* SPL System.map
  1145. # Directories & files removed with 'make mrproper'
  1146. MRPROPER_DIRS += include/config include/generated spl tpl \
  1147. .tmp_objdiff
  1148. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1149. ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
  1150. # clean - Delete most, but leave enough to build external modules
  1151. #
  1152. clean: rm-dirs := $(CLEAN_DIRS)
  1153. clean: rm-files := $(CLEAN_FILES)
  1154. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1155. clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
  1156. PHONY += $(clean-dirs) clean archclean
  1157. $(clean-dirs):
  1158. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1159. # TODO: Do not use *.cfgtmp
  1160. clean: $(clean-dirs)
  1161. $(call cmd,rmdirs)
  1162. $(call cmd,rmfiles)
  1163. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1164. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1165. -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
  1166. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1167. -o -name '*.symtypes' -o -name 'modules.order' \
  1168. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1169. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1170. -o -name '*.gcno' \) -type f -print | xargs rm -f
  1171. # mrproper - Delete all generated files, including .config
  1172. #
  1173. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1174. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1175. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1176. PHONY += $(mrproper-dirs) mrproper archmrproper
  1177. $(mrproper-dirs):
  1178. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1179. mrproper: clean $(mrproper-dirs)
  1180. $(call cmd,rmdirs)
  1181. $(call cmd,rmfiles)
  1182. @rm -f arch/*/include/asm/arch
  1183. # distclean
  1184. #
  1185. PHONY += distclean
  1186. distclean: mrproper
  1187. @find $(srctree) $(RCS_FIND_IGNORE) \
  1188. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1189. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1190. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1191. -o -name '*.pyc' \) \
  1192. -type f -print | xargs rm -f
  1193. @rm -f boards.cfg
  1194. backup:
  1195. F=`basename $(srctree)` ; cd .. ; \
  1196. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1197. help:
  1198. @echo 'Cleaning targets:'
  1199. @echo ' clean - Remove most generated files but keep the config'
  1200. @echo ' mrproper - Remove all generated files + config + various backup files'
  1201. @echo ' distclean - mrproper + remove editor backup and patch files'
  1202. @echo ''
  1203. @echo 'Configuration targets:'
  1204. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1205. @echo ''
  1206. @echo 'Other generic targets:'
  1207. @echo ' all - Build all necessary images depending on configuration'
  1208. @echo '* u-boot - Build the bare u-boot'
  1209. @echo ' dir/ - Build all files in dir and below'
  1210. @echo ' dir/file.[oisS] - Build specified target only'
  1211. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1212. @echo ' (requires a recent binutils and recent build (System.map))'
  1213. @echo ' tags/ctags - Generate ctags file for editors'
  1214. @echo ' etags - Generate etags file for editors'
  1215. @echo ' cscope - Generate cscope index'
  1216. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1217. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1218. @echo ''
  1219. @echo 'Static analysers'
  1220. @echo ' checkstack - Generate a list of stack hogs'
  1221. @echo ''
  1222. @echo 'Documentation targets:'
  1223. @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
  1224. @echo ''
  1225. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1226. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1227. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1228. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1229. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1230. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1231. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1232. @echo ' 1: warnings which may be relevant and do not occur too often'
  1233. @echo ' 2: warnings which occur quite often but may still be relevant'
  1234. @echo ' 3: more obscure warnings, can most likely be ignored'
  1235. @echo ' Multiple levels can be combined with W=12 or W=123'
  1236. @echo ''
  1237. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1238. @echo 'For further info see the ./README file'
  1239. # Documentation targets
  1240. # ---------------------------------------------------------------------------
  1241. %docs: scripts_basic FORCE
  1242. $(Q)$(MAKE) $(build)=scripts build_docproc
  1243. $(Q)$(MAKE) $(build)=doc/DocBook $@
  1244. # Dummies...
  1245. PHONY += prepare scripts
  1246. prepare: ;
  1247. scripts: ;
  1248. endif #ifeq ($(config-targets),1)
  1249. endif #ifeq ($(mixed-targets),1)
  1250. PHONY += checkstack ubootrelease ubootversion
  1251. checkstack:
  1252. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1253. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1254. ubootrelease:
  1255. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1256. ubootversion:
  1257. @echo $(UBOOTVERSION)
  1258. # Single targets
  1259. # ---------------------------------------------------------------------------
  1260. # Single targets are compatible with:
  1261. # - build with mixed source and output
  1262. # - build with separate output dir 'make O=...'
  1263. # - external modules
  1264. #
  1265. # target-dir => where to store outputfile
  1266. # build-dir => directory in kernel source tree to use
  1267. ifeq ($(KBUILD_EXTMOD),)
  1268. build-dir = $(patsubst %/,%,$(dir $@))
  1269. target-dir = $(dir $@)
  1270. else
  1271. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1272. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1273. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1274. endif
  1275. %.s: %.c prepare scripts FORCE
  1276. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1277. %.i: %.c prepare scripts FORCE
  1278. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1279. %.o: %.c prepare scripts FORCE
  1280. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1281. %.lst: %.c prepare scripts FORCE
  1282. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1283. %.s: %.S prepare scripts FORCE
  1284. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1285. %.o: %.S prepare scripts FORCE
  1286. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1287. %.symtypes: %.c prepare scripts FORCE
  1288. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1289. # Modules
  1290. /: prepare scripts FORCE
  1291. $(cmd_crmodverdir)
  1292. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1293. $(build)=$(build-dir)
  1294. %/: prepare scripts FORCE
  1295. $(cmd_crmodverdir)
  1296. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1297. $(build)=$(build-dir)
  1298. %.ko: prepare scripts FORCE
  1299. $(cmd_crmodverdir)
  1300. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1301. $(build)=$(build-dir) $(@:.ko=.o)
  1302. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1303. # FIXME Should go into a make.lib or something
  1304. # ===========================================================================
  1305. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1306. cmd_rmdirs = rm -rf $(rm-dirs)
  1307. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1308. cmd_rmfiles = rm -f $(rm-files)
  1309. # read all saved command lines
  1310. targets := $(wildcard $(sort $(targets)))
  1311. cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
  1312. ifneq ($(cmd_files),)
  1313. $(cmd_files): ; # Do not try to update included dependency files
  1314. include $(cmd_files)
  1315. endif
  1316. endif # skip-makefile
  1317. PHONY += FORCE
  1318. FORCE:
  1319. # Declare the contents of the .PHONY variable as phony. We keep that
  1320. # information in a variable so we can use it in if_changed and friends.
  1321. .PHONY: $(PHONY)