Makefile 76 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343
  1. # SPDX-License-Identifier: GPL-2.0+
  2. VERSION = 2021
  3. PATCHLEVEL = 10
  4. SUBLEVEL =
  5. EXTRAVERSION = -rc1
  6. NAME =
  7. # *DOCUMENTATION*
  8. # To see a list of typical targets execute "make help"
  9. # More info can be located in ./README
  10. # Comments in this file are targeted only to the developer, do not
  11. # expect to learn how to build the kernel reading this file.
  12. # Do not use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour)
  14. MAKEFLAGS += -rR
  15. # Determine target architecture for the sandbox
  16. include include/host_arch.h
  17. ifeq ("", "$(CROSS_COMPILE)")
  18. MK_ARCH="${shell uname -m}"
  19. else
  20. MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^\s*\([^\/]*\/\)*\([^-]*\)-\S*/\2/p'}"
  21. endif
  22. unexport HOST_ARCH
  23. ifeq ("x86_64", $(MK_ARCH))
  24. export HOST_ARCH=$(HOST_ARCH_X86_64)
  25. else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
  26. export HOST_ARCH=$(HOST_ARCH_X86)
  27. else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
  28. export HOST_ARCH=$(HOST_ARCH_AARCH64)
  29. else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7l"))
  30. export HOST_ARCH=$(HOST_ARCH_ARM)
  31. else ifeq ("riscv32", $(MK_ARCH))
  32. export HOST_ARCH=$(HOST_ARCH_RISCV32)
  33. else ifeq ("riscv64", $(MK_ARCH))
  34. export HOST_ARCH=$(HOST_ARCH_RISCV64)
  35. endif
  36. undefine MK_ARCH
  37. # Avoid funny character set dependencies
  38. unexport LC_ALL
  39. LC_COLLATE=C
  40. LC_NUMERIC=C
  41. export LC_COLLATE LC_NUMERIC
  42. # Avoid interference with shell env settings
  43. unexport GREP_OPTIONS
  44. # We are using a recursive build, so we need to do a little thinking
  45. # to get the ordering right.
  46. #
  47. # Most importantly: sub-Makefiles should only ever modify files in
  48. # their own directory. If in some directory we have a dependency on
  49. # a file in another dir (which doesn't happen often, but it's often
  50. # unavoidable when linking the built-in.o targets which finally
  51. # turn into vmlinux), we will call a sub make in that other dir, and
  52. # after that we are sure that everything which is in that other dir
  53. # is now up to date.
  54. #
  55. # The only cases where we need to modify files which have global
  56. # effects are thus separated out and done before the recursive
  57. # descending is started. They are now explicitly listed as the
  58. # prepare rule.
  59. # Beautify output
  60. # ---------------------------------------------------------------------------
  61. #
  62. # Normally, we echo the whole command before executing it. By making
  63. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  64. # $(quiet) to choose other forms of output instead, e.g.
  65. #
  66. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  67. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  68. #
  69. # If $(quiet) is empty, the whole command will be printed.
  70. # If it is set to "quiet_", only the short version will be printed.
  71. # If it is set to "silent_", nothing will be printed at all, since
  72. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  73. #
  74. # A simple variant is to prefix commands with $(Q) - that's useful
  75. # for commands that shall be hidden in non-verbose mode.
  76. #
  77. # $(Q)ln $@ :<
  78. #
  79. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  80. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  81. #
  82. # To put more focus on warnings, be less verbose as default
  83. # Use 'make V=1' to see the full commands
  84. ifeq ("$(origin V)", "command line")
  85. KBUILD_VERBOSE = $(V)
  86. endif
  87. ifndef KBUILD_VERBOSE
  88. KBUILD_VERBOSE = 0
  89. endif
  90. ifeq ($(KBUILD_VERBOSE),1)
  91. quiet =
  92. Q =
  93. else
  94. quiet=quiet_
  95. Q = @
  96. endif
  97. # If the user is running make -s (silent mode), suppress echoing of
  98. # commands
  99. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  100. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  101. quiet=silent_
  102. endif
  103. else # make-3.8x
  104. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  105. quiet=silent_
  106. endif
  107. endif
  108. export quiet Q KBUILD_VERBOSE
  109. # kbuild supports saving output files in a separate directory.
  110. # To locate output files in a separate directory two syntaxes are supported.
  111. # In both cases the working directory must be the root of the kernel src.
  112. # 1) O=
  113. # Use "make O=dir/to/store/output/files/"
  114. #
  115. # 2) Set KBUILD_OUTPUT
  116. # Set the environment variable KBUILD_OUTPUT to point to the directory
  117. # where the output files shall be placed.
  118. # export KBUILD_OUTPUT=dir/to/store/output/files/
  119. # make
  120. #
  121. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  122. # variable.
  123. # KBUILD_SRC is set on invocation of make in OBJ directory
  124. # KBUILD_SRC is not intended to be used by the regular user (for now)
  125. ifeq ($(KBUILD_SRC),)
  126. # OK, Make called in directory where kernel src resides
  127. # Do we want to locate output files in a separate directory?
  128. ifeq ("$(origin O)", "command line")
  129. KBUILD_OUTPUT := $(O)
  130. endif
  131. # That's our default target when none is given on the command line
  132. PHONY := _all
  133. _all:
  134. # Cancel implicit rules on top Makefile
  135. $(CURDIR)/Makefile Makefile: ;
  136. ifneq ($(KBUILD_OUTPUT),)
  137. # Invoke a second make in the output directory, passing relevant variables
  138. # check that the output directory actually exists
  139. saved-output := $(KBUILD_OUTPUT)
  140. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  141. && /bin/pwd)
  142. $(if $(KBUILD_OUTPUT),, \
  143. $(error failed to create output directory "$(saved-output)"))
  144. # Look for make include files relative to root of kernel src
  145. #
  146. # This does not become effective immediately because MAKEFLAGS is re-parsed
  147. # once after the Makefile is read. It is OK since we are going to invoke
  148. # 'sub-make' below.
  149. MAKEFLAGS += --include-dir=$(CURDIR)
  150. PHONY += $(MAKECMDGOALS) sub-make
  151. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  152. @:
  153. sub-make: FORCE
  154. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  155. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  156. # Leave processing to above invocation of make
  157. skip-makefile := 1
  158. endif # ifneq ($(KBUILD_OUTPUT),)
  159. endif # ifeq ($(KBUILD_SRC),)
  160. # We process the rest of the Makefile if this is the final invocation of make
  161. ifeq ($(skip-makefile),)
  162. # Do not print "Entering directory ...",
  163. # but we want to display it when entering to the output directory
  164. # so that IDEs/editors are able to understand relative filenames.
  165. MAKEFLAGS += --no-print-directory
  166. # Call a source code checker (by default, "sparse") as part of the
  167. # C compilation.
  168. #
  169. # Use 'make C=1' to enable checking of only re-compiled files.
  170. # Use 'make C=2' to enable checking of *all* source files, regardless
  171. # of whether they are re-compiled or not.
  172. #
  173. # See the file "doc/sparse.txt" for more details, including
  174. # where to get the "sparse" utility.
  175. ifeq ("$(origin C)", "command line")
  176. KBUILD_CHECKSRC = $(C)
  177. endif
  178. ifndef KBUILD_CHECKSRC
  179. KBUILD_CHECKSRC = 0
  180. endif
  181. # Use make M=dir to specify directory of external module to build
  182. # Old syntax make ... SUBDIRS=$PWD is still supported
  183. # Setting the environment variable KBUILD_EXTMOD take precedence
  184. ifdef SUBDIRS
  185. KBUILD_EXTMOD ?= $(SUBDIRS)
  186. endif
  187. ifeq ("$(origin M)", "command line")
  188. KBUILD_EXTMOD := $(M)
  189. endif
  190. # If building an external module we do not care about the all: rule
  191. # but instead _all depend on modules
  192. PHONY += all
  193. ifeq ($(KBUILD_EXTMOD),)
  194. _all: all
  195. else
  196. _all: modules
  197. endif
  198. ifeq ($(KBUILD_SRC),)
  199. # building in the source tree
  200. srctree := .
  201. else
  202. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  203. # building in a subdirectory of the source tree
  204. srctree := ..
  205. else
  206. srctree := $(KBUILD_SRC)
  207. endif
  208. endif
  209. objtree := .
  210. src := $(srctree)
  211. obj := $(objtree)
  212. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  213. export srctree objtree VPATH
  214. # Make sure CDPATH settings don't interfere
  215. unexport CDPATH
  216. #########################################################################
  217. HOSTARCH := $(shell uname -m | \
  218. sed -e s/i.86/x86/ \
  219. -e s/sun4u/sparc64/ \
  220. -e s/arm.*/arm/ \
  221. -e s/sa110/arm/ \
  222. -e s/ppc64/powerpc/ \
  223. -e s/ppc/powerpc/ \
  224. -e s/macppc/powerpc/\
  225. -e s/sh.*/sh/)
  226. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  227. sed -e 's/\(cygwin\).*/cygwin/')
  228. export HOSTARCH HOSTOS
  229. #########################################################################
  230. # set default to nothing for native builds
  231. ifeq ($(HOSTARCH),$(ARCH))
  232. CROSS_COMPILE ?=
  233. endif
  234. KCONFIG_CONFIG ?= .config
  235. export KCONFIG_CONFIG
  236. # SHELL used by kbuild
  237. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  238. else if [ -x /bin/bash ]; then echo /bin/bash; \
  239. else echo sh; fi ; fi)
  240. HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
  241. HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
  242. HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
  243. HOSTCC = cc
  244. HOSTCXX = c++
  245. KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
  246. $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
  247. KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
  248. KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
  249. KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
  250. # With the move to GCC 6, we have implicitly upgraded our language
  251. # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
  252. # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
  253. # have older compilers as their default, so we make it explicit for
  254. # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
  255. CSTD_FLAG := -std=gnu11
  256. ifeq ($(HOSTOS),linux)
  257. KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
  258. endif
  259. ifeq ($(HOSTOS),cygwin)
  260. KBUILD_HOSTCFLAGS += -ansi
  261. endif
  262. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  263. # generates numerous errors and warnings. We want to bypass it
  264. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  265. # option to the compiler. Note that the -traditional-cpp flag
  266. # DOES NOT have the same semantics as GNU C's flag, all it does
  267. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  268. #
  269. # Apple's linker is similar, thanks to the new 2 stage linking
  270. # multiple symbol definitions are treated as errors, hence the
  271. # -multiply_defined suppress option to turn off this error.
  272. #
  273. ifeq ($(HOSTOS),darwin)
  274. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  275. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  276. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  277. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  278. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  279. os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
  280. $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  281. # Snow Leopards build environment has no longer restrictions as described above
  282. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  283. KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  284. KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  285. # macOS Mojave (10.14.X)
  286. # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
  287. KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
  288. endif
  289. # Decide whether to build built-in, modular, or both.
  290. # Normally, just do built-in.
  291. KBUILD_MODULES :=
  292. KBUILD_BUILTIN := 1
  293. # If we have only "make modules", don't compile built-in objects.
  294. # When we're building modules with modversions, we need to consider
  295. # the built-in objects during the descend as well, in order to
  296. # make sure the checksums are up to date before we record them.
  297. ifeq ($(MAKECMDGOALS),modules)
  298. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  299. endif
  300. # If we have "make <whatever> modules", compile modules
  301. # in addition to whatever we do anyway.
  302. # Just "make" or "make all" shall build modules as well
  303. # U-Boot does not need modules
  304. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  305. # KBUILD_MODULES := 1
  306. #endif
  307. #ifeq ($(MAKECMDGOALS),)
  308. # KBUILD_MODULES := 1
  309. #endif
  310. # Check ths size of a binary:
  311. # Args:
  312. # $1: File to check
  313. # #2: Size limit in bytes (decimal or 0xhex)
  314. define size_check
  315. actual=$$( wc -c $1 | awk '{print $$1}'); \
  316. limit=$$( printf "%d" $2 ); \
  317. if test $$actual -gt $$limit; then \
  318. echo "$1 exceeds file size limit:" >&2; \
  319. echo " limit: $$(printf %#x $$limit) bytes" >&2; \
  320. echo " actual: $$(printf %#x $$actual) bytes" >&2; \
  321. echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
  322. exit 1; \
  323. fi
  324. endef
  325. export size_check
  326. export KBUILD_MODULES KBUILD_BUILTIN
  327. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  328. # We need some generic definitions (do not try to remake the file).
  329. scripts/Kbuild.include: ;
  330. include scripts/Kbuild.include
  331. # Make variables (CC, etc...)
  332. AS = $(CROSS_COMPILE)as
  333. # Always use GNU ld
  334. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  335. LD = $(CROSS_COMPILE)ld.bfd
  336. else
  337. LD = $(CROSS_COMPILE)ld
  338. endif
  339. CC = $(CROSS_COMPILE)gcc
  340. CPP = $(CC) -E
  341. AR = $(CROSS_COMPILE)ar
  342. NM = $(CROSS_COMPILE)nm
  343. LDR = $(CROSS_COMPILE)ldr
  344. STRIP = $(CROSS_COMPILE)strip
  345. OBJCOPY = $(CROSS_COMPILE)objcopy
  346. OBJDUMP = $(CROSS_COMPILE)objdump
  347. LEX = flex
  348. YACC = bison
  349. AWK = awk
  350. PERL = perl
  351. PYTHON ?= python
  352. PYTHON2 = python2
  353. PYTHON3 ?= python3
  354. DTC ?= $(objtree)/scripts/dtc/dtc
  355. CHECK = sparse
  356. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  357. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  358. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  359. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  360. -Wno-format-security \
  361. -fno-builtin -ffreestanding $(CSTD_FLAG)
  362. KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
  363. KBUILD_AFLAGS := -D__ASSEMBLY__
  364. KBUILD_LDFLAGS :=
  365. ifeq ($(cc-name),clang)
  366. ifneq ($(CROSS_COMPILE),)
  367. CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
  368. GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
  369. CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
  370. GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
  371. endif
  372. ifneq ($(GCC_TOOLCHAIN),)
  373. CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
  374. endif
  375. KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  376. KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  377. KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
  378. KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
  379. endif
  380. # Don't generate position independent code
  381. KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
  382. KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
  383. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  384. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  385. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  386. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  387. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  388. export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
  389. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
  390. export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
  391. export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
  392. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
  393. export KBUILD_CFLAGS KBUILD_AFLAGS
  394. export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
  395. # When compiling out-of-tree modules, put MODVERDIR in the module
  396. # tree rather than in the kernel tree. The kernel tree might
  397. # even be read-only.
  398. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  399. # Files to ignore in find ... statements
  400. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  401. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  402. -prune -o
  403. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  404. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  405. # ===========================================================================
  406. # Rules shared between *config targets and build targets
  407. # Basic helpers built in scripts/
  408. PHONY += scripts_basic
  409. scripts_basic:
  410. $(Q)$(MAKE) $(build)=scripts/basic
  411. $(Q)rm -f .tmp_quiet_recordmcount
  412. # To avoid any implicit rule to kick in, define an empty command.
  413. scripts/basic/%: scripts_basic ;
  414. PHONY += outputmakefile
  415. # outputmakefile generates a Makefile in the output directory, if using a
  416. # separate output directory. This allows convenient use of make in the
  417. # output directory.
  418. outputmakefile:
  419. ifneq ($(KBUILD_SRC),)
  420. $(Q)ln -fsn $(srctree) source
  421. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
  422. endif
  423. # To make sure we do not include .config for any of the *config targets
  424. # catch them early, and hand them over to scripts/kconfig/Makefile
  425. # It is allowed to specify more targets when calling make, including
  426. # mixing *config targets and build targets.
  427. # For example 'make oldconfig all'.
  428. # Detect when mixed targets is specified, and make a second invocation
  429. # of make so .config is not included in this case either (for *config).
  430. version_h := include/generated/version_autogenerated.h
  431. timestamp_h := include/generated/timestamp_autogenerated.h
  432. defaultenv_h := include/generated/defaultenv_autogenerated.h
  433. dt_h := include/generated/dt.h
  434. no-dot-config-targets := clean clobber mrproper distclean \
  435. help %docs check% coccicheck \
  436. ubootversion backup tests check qcheck tcheck
  437. config-targets := 0
  438. mixed-targets := 0
  439. dot-config := 1
  440. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  441. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  442. dot-config := 0
  443. endif
  444. endif
  445. ifeq ($(KBUILD_EXTMOD),)
  446. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  447. config-targets := 1
  448. ifneq ($(words $(MAKECMDGOALS)),1)
  449. mixed-targets := 1
  450. endif
  451. endif
  452. endif
  453. ifeq ($(mixed-targets),1)
  454. # ===========================================================================
  455. # We're called with mixed targets (*config and build targets).
  456. # Handle them one by one.
  457. PHONY += $(MAKECMDGOALS) __build_one_by_one
  458. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  459. @:
  460. __build_one_by_one:
  461. $(Q)set -e; \
  462. for i in $(MAKECMDGOALS); do \
  463. $(MAKE) -f $(srctree)/Makefile $$i; \
  464. done
  465. else
  466. ifeq ($(config-targets),1)
  467. # ===========================================================================
  468. # *config targets only - make sure prerequisites are updated, and descend
  469. # in scripts/kconfig to make the *config target
  470. KBUILD_DEFCONFIG := sandbox_defconfig
  471. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  472. config: scripts_basic outputmakefile FORCE
  473. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  474. %config: scripts_basic outputmakefile FORCE
  475. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  476. else
  477. # ===========================================================================
  478. # Build targets only - this includes vmlinux, arch specific targets, clean
  479. # targets and others. In general all targets except *config targets.
  480. # Additional helpers built in scripts/
  481. # Carefully list dependencies so we do not try to build scripts twice
  482. # in parallel
  483. PHONY += scripts
  484. scripts: scripts_basic scripts_dtc include/config/auto.conf
  485. $(Q)$(MAKE) $(build)=$(@)
  486. ifeq ($(dot-config),1)
  487. # Read in config
  488. -include include/config/auto.conf
  489. # Read in dependencies to all Kconfig* files, make sure to run
  490. # oldconfig if changes are detected.
  491. -include include/config/auto.conf.cmd
  492. # To avoid any implicit rule to kick in, define an empty command
  493. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  494. # If .config is newer than include/config/auto.conf, someone tinkered
  495. # with it and forgot to run make oldconfig.
  496. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  497. # we execute the config step to be sure to catch updated Kconfig files
  498. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  499. $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
  500. @# If the following part fails, include/config/auto.conf should be
  501. @# deleted so "make silentoldconfig" will be re-run on the next build.
  502. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  503. { rm -f include/config/auto.conf; false; }
  504. @# include/config.h has been updated after "make silentoldconfig".
  505. @# We need to touch include/config/auto.conf so it gets newer
  506. @# than include/config.h.
  507. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  508. $(Q)touch include/config/auto.conf
  509. u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
  510. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
  511. -include include/autoconf.mk
  512. -include include/autoconf.mk.dep
  513. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  514. # is up-to-date. When we switch to a different board configuration, old CONFIG
  515. # macros are still remaining in include/config/auto.conf. Without the following
  516. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  517. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  518. ifneq ($(wildcard include/config/auto.conf),)
  519. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  520. include/config/auto.conf)
  521. ifeq ($(autoconf_is_old),)
  522. include config.mk
  523. include arch/$(ARCH)/Makefile
  524. endif
  525. endif
  526. endif
  527. # These are set by the arch-specific config.mk. Make sure they are exported
  528. # so they can be used when building an EFI application.
  529. export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
  530. export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
  531. export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
  532. export CFLAGS_EFI # Compiler flags to add when building EFI app
  533. export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
  534. export EFI_TARGET # binutils target if EFI is natively supported
  535. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  536. # that (or fail if absent). Otherwise, search for a linker script in a
  537. # standard location.
  538. ifndef LDSCRIPT
  539. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  540. ifdef CONFIG_SYS_LDSCRIPT
  541. # need to strip off double quotes
  542. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  543. endif
  544. endif
  545. # If there is no specified link script, we look in a number of places for it
  546. ifndef LDSCRIPT
  547. ifeq ($(wildcard $(LDSCRIPT)),)
  548. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  549. endif
  550. ifeq ($(wildcard $(LDSCRIPT)),)
  551. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  552. endif
  553. ifeq ($(wildcard $(LDSCRIPT)),)
  554. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  555. endif
  556. endif
  557. else
  558. # Dummy target needed, because used as prerequisite
  559. include/config/auto.conf: ;
  560. endif # $(dot-config)
  561. #
  562. # Xtensa linker script cannot be preprocessed with -ansi because of
  563. # preprocessor operations on strings that don't make C identifiers.
  564. #
  565. ifeq ($(CONFIG_XTENSA),)
  566. LDPPFLAGS += -ansi
  567. endif
  568. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  569. KBUILD_CFLAGS += -Os
  570. else
  571. KBUILD_CFLAGS += -O2
  572. endif
  573. LTO_CFLAGS :=
  574. LTO_FINAL_LDFLAGS :=
  575. export LTO_CFLAGS LTO_FINAL_LDFLAGS
  576. ifdef CONFIG_LTO
  577. ifeq ($(cc-name),clang)
  578. LTO_CFLAGS += -flto
  579. LTO_FINAL_LDFLAGS += -flto
  580. AR = $(shell $(CC) -print-prog-name=llvm-ar)
  581. NM = $(shell $(CC) -print-prog-name=llvm-nm)
  582. else
  583. NPROC := $(shell nproc 2>/dev/null || echo 1)
  584. LTO_CFLAGS += -flto=$(NPROC)
  585. LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
  586. # use plugin aware tools
  587. AR = $(CROSS_COMPILE)gcc-ar
  588. NM = $(CROSS_COMPILE)gcc-nm
  589. endif
  590. CFLAGS_NON_EFI += $(LTO_CFLAGS)
  591. KBUILD_CFLAGS += $(LTO_CFLAGS)
  592. endif
  593. ifeq ($(CONFIG_STACKPROTECTOR),y)
  594. KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
  595. CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
  596. else
  597. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  598. endif
  599. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  600. # disable pointer signed / unsigned warnings in gcc 4.0
  601. KBUILD_CFLAGS += -Wno-pointer-sign
  602. # disable stringop warnings in gcc 8+
  603. KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
  604. KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
  605. KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
  606. KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
  607. # Enabled with W=2, disabled by default as noisy
  608. KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
  609. # change __FILE__ to the relative path from the srctree
  610. KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
  611. KBUILD_CFLAGS += -g
  612. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  613. # option to the assembler.
  614. KBUILD_AFLAGS += -g
  615. # Report stack usage if supported
  616. # ARC tools based on GCC 7.1 has an issue with stack usage
  617. # with naked functions, see commit message for more details
  618. ifndef CONFIG_ARC
  619. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  620. KBUILD_CFLAGS += -fstack-usage
  621. endif
  622. endif
  623. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  624. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  625. ifdef CONFIG_CC_IS_CLANG
  626. KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
  627. KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
  628. KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
  629. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  630. # Quiet clang warning: comparison of unsigned expression < 0 is always false
  631. KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
  632. # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
  633. # source of a reference will be _MergedGlobals and not on of the whitelisted names.
  634. # See modpost pattern 2
  635. KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
  636. KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
  637. endif
  638. # These warnings generated too much noise in a regular build.
  639. # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
  640. KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
  641. # Prohibit date/time macros, which would make the build non-deterministic
  642. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  643. include scripts/Makefile.extrawarn
  644. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  645. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  646. KBUILD_AFLAGS += $(KAFLAGS)
  647. KBUILD_CFLAGS += $(KCFLAGS)
  648. KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
  649. # Use UBOOTINCLUDE when you must reference the include/ directory.
  650. # Needed to be compatible with the O= option
  651. UBOOTINCLUDE := \
  652. -Iinclude \
  653. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  654. $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
  655. $(if $(CONFIG_HAS_THUMB2), \
  656. $(if $(CONFIG_CPU_V7M), \
  657. -I$(srctree)/arch/arm/thumb1/include), \
  658. -I$(srctree)/arch/arm/thumb1/include)) \
  659. -I$(srctree)/arch/$(ARCH)/include \
  660. -include $(srctree)/include/linux/kconfig.h
  661. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  662. # FIX ME
  663. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  664. $(NOSTDINC_FLAGS)
  665. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  666. #########################################################################
  667. # U-Boot objects....order is important (i.e. start must be first)
  668. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  669. libs-y += lib/
  670. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  671. libs-$(CONFIG_OF_EMBED) += dts/
  672. libs-y += fs/
  673. libs-y += net/
  674. libs-y += disk/
  675. libs-y += drivers/
  676. libs-y += drivers/dma/
  677. libs-y += drivers/gpio/
  678. libs-y += drivers/i2c/
  679. libs-y += drivers/net/
  680. libs-y += drivers/net/phy/
  681. libs-y += drivers/power/ \
  682. drivers/power/domain/ \
  683. drivers/power/fuel_gauge/ \
  684. drivers/power/mfd/ \
  685. drivers/power/pmic/ \
  686. drivers/power/battery/ \
  687. drivers/power/regulator/
  688. libs-y += drivers/spi/
  689. libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
  690. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  691. libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
  692. libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
  693. libs-y += drivers/serial/
  694. libs-y += drivers/usb/cdns3/
  695. libs-y += drivers/usb/dwc3/
  696. libs-y += drivers/usb/common/
  697. libs-y += drivers/usb/emul/
  698. libs-y += drivers/usb/eth/
  699. libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
  700. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
  701. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
  702. libs-y += drivers/usb/host/
  703. libs-y += drivers/usb/mtu3/
  704. libs-y += drivers/usb/musb/
  705. libs-y += drivers/usb/musb-new/
  706. libs-y += drivers/usb/phy/
  707. libs-y += drivers/usb/ulpi/
  708. libs-y += cmd/
  709. libs-y += common/
  710. libs-y += env/
  711. libs-$(CONFIG_API) += api/
  712. ifdef CONFIG_POST
  713. libs-y += post/
  714. endif
  715. libs-$(CONFIG_UNIT_TEST) += test/
  716. libs-$(CONFIG_UT_ENV) += test/env/
  717. libs-$(CONFIG_UT_OPTEE) += test/optee/
  718. libs-$(CONFIG_UT_OVERLAY) += test/overlay/
  719. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  720. libs-y := $(sort $(libs-y))
  721. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  722. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  723. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  724. u-boot-init := $(head-y)
  725. u-boot-main := $(libs-y)
  726. # Add GCC lib
  727. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  728. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  729. else
  730. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  731. endif
  732. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  733. ifdef CONFIG_CC_COVERAGE
  734. KBUILD_CFLAGS += --coverage
  735. PLATFORM_LIBGCC += -lgcov
  736. endif
  737. export PLATFORM_LIBS
  738. export PLATFORM_LIBGCC
  739. # Special flags for CPP when processing the linker script.
  740. # Pass the version down so we can handle backwards compatibility
  741. # on the fly.
  742. LDPPFLAGS += \
  743. -include $(srctree)/include/u-boot/u-boot.lds.h \
  744. -DCPUDIR=$(CPUDIR) \
  745. $(shell $(LD) --version | \
  746. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  747. #########################################################################
  748. #########################################################################
  749. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  750. BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
  751. else
  752. BOARD_SIZE_CHECK =
  753. endif
  754. ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
  755. SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
  756. else
  757. SPL_SIZE_CHECK =
  758. endif
  759. ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
  760. TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
  761. else
  762. TPL_SIZE_CHECK =
  763. endif
  764. # Statically apply RELA-style relocations (currently arm64 only)
  765. # This is useful for arm64 where static relocation needs to be performed on
  766. # the raw binary, but certain simulators only accept an ELF file (but don't
  767. # do the relocation).
  768. ifneq ($(CONFIG_STATIC_RELA),)
  769. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  770. quiet_cmd_static_rela = RELOC $@
  771. cmd_static_rela = \
  772. start=$$($(NM) $(2) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  773. end=$$($(NM) $(2) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  774. tools/relocate-rela $(3) $(4) $$start $$end
  775. else
  776. quiet_cmd_static_rela =
  777. cmd_static_rela =
  778. endif
  779. # Always append INPUTS so that arch config.mk's can add custom ones
  780. INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
  781. INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  782. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  783. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  784. else
  785. ifneq ($(CONFIG_NXP_ESBC), y)
  786. # For Secure Boot The Image needs to be signed and Header must also
  787. # be included. So The image has to be built explicitly
  788. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  789. endif
  790. endif
  791. INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
  792. ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
  793. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  794. else
  795. ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
  796. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  797. else
  798. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  799. endif
  800. endif
  801. INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  802. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  803. INPUTS-$(CONFIG_BINMAN_STANDALONE_FDT) += u-boot.dtb
  804. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  805. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  806. endif
  807. INPUTS-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  808. ifneq ($(CONFIG_SPL_TARGET),)
  809. INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  810. endif
  811. INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
  812. INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
  813. INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  814. # Generate this input file for binman
  815. ifeq ($(CONFIG_SPL),)
  816. INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
  817. endif
  818. # Add optional build target if defined in board/cpu/soc headers
  819. ifneq ($(CONFIG_BUILD_TARGET),)
  820. INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
  821. endif
  822. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  823. INPUTS-y += init_sp_bss_offset_check
  824. endif
  825. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  826. INPUTS-y += u-boot-with-dtb.bin
  827. endif
  828. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  829. # On ARM64 this target is produced by binman so we don't need this dep
  830. ifeq ($(CONFIG_ARM64),y)
  831. ifeq ($(CONFIG_SPL),y)
  832. # TODO: Get binman to generate this too
  833. INPUTS-y += u-boot-rockchip.bin
  834. endif
  835. else
  836. ifeq ($(CONFIG_SPL),y)
  837. # Generate these inputs for binman which will create the output files
  838. INPUTS-y += idbloader.img u-boot.img
  839. endif
  840. endif
  841. endif
  842. INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
  843. $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
  844. $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
  845. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  846. # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
  847. LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
  848. LDFLAGS_u-boot += --build-id=none
  849. ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
  850. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  851. endif
  852. # insure the checker run with the right endianness
  853. CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
  854. # the checker needs the correct machine size
  855. CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
  856. # Normally we fill empty space with 0xff
  857. quiet_cmd_objcopy = OBJCOPY $@
  858. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  859. $(OBJCOPYFLAGS_$(@F)) $< $@
  860. # Provide a version which does not do this, for use by EFI
  861. quiet_cmd_zobjcopy = OBJCOPY $@
  862. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  863. quiet_cmd_efipayload = OBJCOPY $@
  864. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  865. MKIMAGEOUTPUT ?= /dev/null
  866. quiet_cmd_mkimage = MKIMAGE $@
  867. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  868. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  869. quiet_cmd_mkfitimage = MKIMAGE $@
  870. cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
  871. -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
  872. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  873. quiet_cmd_cat = CAT $@
  874. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  875. append = cat $(filter-out $< $(PHONY), $^) >> $@
  876. quiet_cmd_pad_cat = CAT $@
  877. cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
  878. quiet_cmd_lzma = LZMA $@
  879. cmd_lzma = lzma -c -z -k -9 $< > $@
  880. cfg: u-boot.cfg
  881. quiet_cmd_cfgcheck = CFGCHK $2
  882. cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
  883. $(srctree)/scripts/config_whitelist.txt $(srctree)
  884. # Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
  885. got = $(foreach cfg,$(1),$($(cfg)))
  886. # expected value 'y for each one
  887. expect = $(foreach cfg,$(1),y)
  888. # Show a deprecation message
  889. # Args:
  890. # 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
  891. # 2: Name of component (e.g . "Ethernet drivers")
  892. # 3: Release deadline (e.g. "v202.07")
  893. # 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
  894. # Note: Script avoids bash construct, hence the strange double 'if'
  895. # (patches welcome!)
  896. define deprecated
  897. @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
  898. echo >&2 "===================== WARNING ======================"; \
  899. echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
  900. echo >&2 "for $(2)). Please update the board to use"; \
  901. echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
  902. echo >&2 "update by the deadline may result in board removal."; \
  903. echo >&2 "See doc/driver-model/migration.rst for more info."; \
  904. echo >&2 "===================================================="; \
  905. fi; fi
  906. endef
  907. PHONY += inputs
  908. inputs: $(INPUTS-y)
  909. all: .binman_stamp inputs
  910. ifeq ($(CONFIG_BINMAN),y)
  911. $(call if_changed,binman)
  912. endif
  913. # Timestamp file to make sure that binman always runs
  914. .binman_stamp: FORCE
  915. @touch $@
  916. ifeq ($(CONFIG_DEPRECATED),y)
  917. $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
  918. endif
  919. ifeq ($(CONFIG_OF_EMBED),y)
  920. @echo >&2 "===================== WARNING ======================"
  921. @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
  922. @echo >&2 "be used for debugging purposes. Please use"
  923. @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
  924. @echo >&2 "See doc/README.fdt-control for more info."
  925. @echo >&2 "===================================================="
  926. endif
  927. ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
  928. @echo >&2 "===================== WARNING ======================"
  929. @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
  930. @echo >&2 "to binman instead, to avoid the proliferation of"
  931. @echo >&2 "arch-specific scripts with no tests."
  932. @echo >&2 "===================================================="
  933. endif
  934. ifneq ($(CONFIG_DM),y)
  935. @echo >&2 "===================== WARNING ======================"
  936. @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
  937. @echo >&2 "compulsory starting with the v2020.01 release."
  938. @echo >&2 "Failure to update may result in board removal."
  939. @echo >&2 "See doc/driver-model/migration.rst for more info."
  940. @echo >&2 "===================================================="
  941. endif
  942. $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
  943. $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
  944. $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
  945. $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_I2C))
  946. @# Check that this build does not use CONFIG options that we do not
  947. @# know about unless they are in Kconfig. All the existing CONFIG
  948. @# options are whitelisted, so new ones should not be added.
  949. $(call cmd,cfgcheck,u-boot.cfg)
  950. PHONY += dtbs
  951. dtbs: dts/dt.dtb
  952. @:
  953. dts/dt.dtb: u-boot
  954. $(Q)$(MAKE) $(build)=dts dtbs
  955. quiet_cmd_copy = COPY $@
  956. cmd_copy = cp $< $@
  957. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  958. ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
  959. FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
  960. else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
  961. FINAL_DTB_CONTAINER = fit-dtb.blob.gz
  962. else
  963. FINAL_DTB_CONTAINER = fit-dtb.blob
  964. endif
  965. fit-dtb.blob.gz: fit-dtb.blob
  966. @gzip -kf9 $< > $@
  967. fit-dtb.blob.lzo: fit-dtb.blob
  968. @lzop -f9 $< > $@
  969. fit-dtb.blob: dts/dt.dtb FORCE
  970. $(call if_changed,mkimage)
  971. ifneq ($(SOURCE_DATE_EPOCH),)
  972. touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
  973. chmod 0600 fit-dtb.blob
  974. endif
  975. MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  976. -a 0 -e 0 -E \
  977. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
  978. ifneq ($(EXT_DTB),)
  979. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
  980. $(call if_changed,cat)
  981. else
  982. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
  983. $(call if_changed,cat)
  984. endif
  985. u-boot.bin: u-boot-fit-dtb.bin FORCE
  986. $(call if_changed,copy)
  987. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  988. $(call if_changed,cat)
  989. else ifeq ($(CONFIG_OF_SEPARATE),y)
  990. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  991. $(call if_changed,cat)
  992. u-boot.bin: u-boot-dtb.bin FORCE
  993. $(call if_changed,copy)
  994. else
  995. u-boot.bin: u-boot-nodtb.bin FORCE
  996. $(call if_changed,copy)
  997. endif
  998. # we call Makefile in arch/arm/mach-imx which
  999. # has targets which are dependent on targets defined
  1000. # here. make could not resolve them and we must ensure
  1001. # that they are finished before calling imx targets
  1002. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  1003. IMX_DEPS = u-boot-fit-dtb.bin
  1004. endif
  1005. %.imx: $(IMX_DEPS) %.bin
  1006. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1007. $(BOARD_SIZE_CHECK)
  1008. %.vyb: %.imx
  1009. $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
  1010. quiet_cmd_copy = COPY $@
  1011. cmd_copy = cp $< $@
  1012. u-boot.dtb: dts/dt.dtb
  1013. $(call cmd,copy)
  1014. OBJCOPYFLAGS_u-boot.hex := -O ihex
  1015. OBJCOPYFLAGS_u-boot.srec := -O srec
  1016. u-boot.hex u-boot.srec: u-boot FORCE
  1017. $(call if_changed,objcopy)
  1018. OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
  1019. u-boot-elf.srec: u-boot.elf FORCE
  1020. $(call if_changed,objcopy)
  1021. OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
  1022. spl/u-boot-spl.srec: spl/u-boot-spl FORCE
  1023. $(call if_changed,objcopy)
  1024. %.scif: %.srec
  1025. $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
  1026. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  1027. $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
  1028. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
  1029. binary_size_check: u-boot-nodtb.bin FORCE
  1030. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  1031. map_size=$(shell cat u-boot.map | \
  1032. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  1033. | sed 's/0X//g' \
  1034. | bc); \
  1035. if [ "" != "$$map_size" ]; then \
  1036. if test $$map_size -ne $$file_size; then \
  1037. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  1038. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  1039. exit 1; \
  1040. fi \
  1041. fi
  1042. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  1043. ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
  1044. subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
  1045. else
  1046. subtract_sys_malloc_f_len = true
  1047. endif
  1048. # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
  1049. # so low that the DTB could probably use 90%+ of the available space, for
  1050. # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
  1051. # safe for now and tweak this later if space becomes tight.
  1052. # A rejected alternative would be to check that some absolute minimum stack
  1053. # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
  1054. # deliberately build-specific, to take account of build-to-build stack usage
  1055. # differences due to different feature sets, there is no common absolute value
  1056. # to check against.
  1057. init_sp_bss_offset_check: u-boot.dtb FORCE
  1058. @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
  1059. space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
  1060. $(subtract_sys_malloc_f_len) ; \
  1061. quarter_space=$$(($${space} / 4)) ; \
  1062. if [ $${dtb_size} -gt $${quarter_space} ]; then \
  1063. echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
  1064. echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
  1065. exit 1 ; \
  1066. fi
  1067. endif
  1068. shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
  1069. quiet_cmd_objcopy_uboot = OBJCOPY $@
  1070. ifdef cmd_static_rela
  1071. cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
  1072. else
  1073. cmd_objcopy_uboot = $(cmd_objcopy)
  1074. endif
  1075. u-boot-nodtb.bin: u-boot FORCE
  1076. $(call if_changed,objcopy_uboot)
  1077. $(BOARD_SIZE_CHECK)
  1078. u-boot.ldr: u-boot
  1079. $(CREATE_LDR_ENV)
  1080. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  1081. $(BOARD_SIZE_CHECK)
  1082. # binman
  1083. # ---------------------------------------------------------------------------
  1084. # Use 'make BINMAN_DEBUG=1' to enable debugging
  1085. # Use 'make BINMAN_VERBOSE=3' to set vebosity level
  1086. default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
  1087. # Tell binman whether we have a devicetree for SPL and TPL
  1088. have_spl_dt := $(if $(CONFIG_SPL_OF_PLATDATA),,$(CONFIG_SPL_OF_CONTROL))
  1089. have_tpl_dt := $(if $(CONFIG_TPL_OF_PLATDATA),,$(CONFIG_TPL_OF_CONTROL))
  1090. quiet_cmd_binman = BINMAN $@
  1091. cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
  1092. --toolpath $(objtree)/tools \
  1093. $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
  1094. build -u -d u-boot.dtb -O . -m --allow-missing \
  1095. -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
  1096. -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
  1097. -a atf-bl31-path=${BL31} \
  1098. -a opensbi-path=${OPENSBI} \
  1099. -a default-dt=$(default_dt) \
  1100. -a scp-path=$(SCP) \
  1101. -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
  1102. -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
  1103. -a spl-dtb=$(have_spl_dt) -a tpl-dtb=$(have_tpl_dt) \
  1104. $(BINMAN_$(@F))
  1105. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  1106. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  1107. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  1108. $(call if_changed,objcopy)
  1109. #
  1110. # U-Boot entry point, needed for booting of full-blown U-Boot
  1111. # from the SPL U-Boot version.
  1112. #
  1113. ifndef CONFIG_SYS_UBOOT_START
  1114. CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
  1115. endif
  1116. # Boards with more complex image requirements can provide an .its source file
  1117. # or a generator script
  1118. # NOTE: Please do not use this. We are migrating away from Makefile rules to use
  1119. # binman instead.
  1120. ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
  1121. U_BOOT_ITS := u-boot.its
  1122. $(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
  1123. $(call if_changed,copy)
  1124. else
  1125. ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
  1126. U_BOOT_ITS := u-boot.its
  1127. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
  1128. U_BOOT_ITS_DEPS += u-boot-nodtb.bin
  1129. endif
  1130. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
  1131. U_BOOT_ITS_DEPS += u-boot
  1132. endif
  1133. $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
  1134. $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
  1135. $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
  1136. endif
  1137. endif
  1138. ifdef CONFIG_SPL_LOAD_FIT
  1139. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1140. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1141. -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
  1142. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  1143. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
  1144. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
  1145. $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
  1146. else
  1147. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  1148. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1149. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1150. MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
  1151. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1152. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1153. u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
  1154. endif
  1155. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  1156. # Some boards have the kwbimage.cfg file written in advance, while some
  1157. # other boards generate it on the fly during the build in the build tree.
  1158. # Let's check if the file exists in the build tree first, otherwise we
  1159. # fall back to use the one in the source tree.
  1160. KWD_CONFIG_FILE = $(shell \
  1161. if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
  1162. echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1163. else \
  1164. echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1165. fi)
  1166. MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
  1167. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  1168. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
  1169. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1170. $(if $(KEYDIR),-k $(KEYDIR))
  1171. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1172. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  1173. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1174. UBOOT_BIN := u-boot-with-dtb.bin
  1175. else
  1176. UBOOT_BIN := u-boot.bin
  1177. endif
  1178. MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
  1179. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1180. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1181. u-boot.bin.lzma: u-boot.bin FORCE
  1182. $(call if_changed,lzma)
  1183. u-boot-lzma.img: u-boot.bin.lzma FORCE
  1184. $(call if_changed,mkimage)
  1185. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
  1186. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
  1187. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE)$(CONFIG_BINMAN_STANDALONE_FDT),dts/dt.dtb) \
  1188. ,$(UBOOT_BIN)) FORCE
  1189. $(call if_changed,mkimage)
  1190. $(BOARD_SIZE_CHECK)
  1191. ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
  1192. MKIMAGEFLAGS_u-boot.itb =
  1193. else
  1194. MKIMAGEFLAGS_u-boot.itb = -E
  1195. endif
  1196. ifdef U_BOOT_ITS
  1197. u-boot.itb: u-boot-nodtb.bin \
  1198. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1199. $(U_BOOT_ITS) FORCE
  1200. $(call if_changed,mkfitimage)
  1201. $(BOARD_SIZE_CHECK)
  1202. endif
  1203. u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
  1204. $(call if_changed,mkimage)
  1205. u-boot.sha1: u-boot.bin
  1206. tools/ubsha1 u-boot.bin
  1207. u-boot.dis: u-boot
  1208. $(OBJDUMP) -d $< > $@
  1209. ifneq ($(CONFIG_SPL_PAYLOAD),)
  1210. SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
  1211. else
  1212. SPL_PAYLOAD := u-boot.bin
  1213. endif
  1214. SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
  1215. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  1216. --pad-to=$(CONFIG_SPL_PAD_TO)
  1217. u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
  1218. $(call if_changed,pad_cat)
  1219. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  1220. # TPL + SPL
  1221. ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
  1222. MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
  1223. tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
  1224. $(call if_changed,mkimage)
  1225. idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
  1226. $(call if_changed,cat)
  1227. else
  1228. MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
  1229. idbloader.img: spl/u-boot-spl.bin FORCE
  1230. $(call if_changed,mkimage)
  1231. endif
  1232. ifeq ($(CONFIG_ARM64),y)
  1233. OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
  1234. --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
  1235. u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
  1236. $(call if_changed,pad_cat)
  1237. endif # CONFIG_ARM64
  1238. endif # CONFIG_ARCH_ROCKCHIP
  1239. ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
  1240. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  1241. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  1242. $(call if_changed,mkimage)
  1243. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1244. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  1245. $(call if_changed,objcopy)
  1246. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1247. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  1248. $(call if_changed,objcopy)
  1249. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  1250. $(call if_changed,cat)
  1251. endif
  1252. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  1253. --pad-to=$(CONFIG_TPL_PAD_TO)
  1254. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  1255. $(call if_changed,pad_cat)
  1256. SPL: spl/u-boot-spl.bin FORCE
  1257. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1258. ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
  1259. ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
  1260. u-boot.cnt: u-boot.bin FORCE
  1261. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1262. flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
  1263. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1264. else
  1265. ifeq ($(CONFIG_BINMAN),y)
  1266. flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
  1267. $(call if_changed,binman)
  1268. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1269. else
  1270. flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
  1271. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1272. endif
  1273. endif
  1274. endif
  1275. u-boot.uim: u-boot.bin FORCE
  1276. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1277. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
  1278. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1279. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  1280. u-boot.ubl: u-boot-with-spl.bin FORCE
  1281. $(call if_changed,mkimage)
  1282. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  1283. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  1284. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  1285. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  1286. $(call if_changed,mkimage)
  1287. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1288. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  1289. $(call if_changed,pad_cat)
  1290. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  1291. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  1292. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  1293. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  1294. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  1295. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  1296. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  1297. $(call if_changed,mkimage)
  1298. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  1299. quiet_cmd_gensplx4 = GENSPLX4 $@
  1300. cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
  1301. --pad-to=$(CONFIG_SPL_PAD_TO) \
  1302. spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
  1303. cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1304. spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
  1305. spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
  1306. $(call if_changed,gensplx4)
  1307. quiet_cmd_socboot = SOCBOOT $@
  1308. cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1309. u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
  1310. $(call if_changed,socboot)
  1311. quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
  1312. cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
  1313. cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1314. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1315. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1316. spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
  1317. { rm -f $@ spl/u-boot-spl.pad; false; }
  1318. u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
  1319. $(call if_changed,gensplpadx4)
  1320. quiet_cmd_socnandboot = SOCNANDBOOT $@
  1321. cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1322. u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
  1323. $(call if_changed,socnandboot)
  1324. endif
  1325. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1326. u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
  1327. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
  1328. $(call if_changed,binman)
  1329. ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
  1330. OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
  1331. u-boot-br.bin: u-boot FORCE
  1332. $(call if_changed,objcopy)
  1333. endif
  1334. endif
  1335. quiet_cmd_ldr = LD $@
  1336. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  1337. $(filter-out FORCE,$^) -o $@
  1338. ifdef CONFIG_X86
  1339. OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
  1340. u-boot-x86-start16.bin: u-boot FORCE
  1341. $(call if_changed,objcopy)
  1342. OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
  1343. u-boot-x86-reset16.bin: u-boot FORCE
  1344. $(call if_changed,objcopy)
  1345. endif # CONFIG_X86
  1346. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  1347. u-boot-app.efi: u-boot FORCE
  1348. $(call if_changed,zobjcopy)
  1349. u-boot.bin.o: u-boot.bin FORCE
  1350. $(call if_changed,efipayload)
  1351. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  1352. $(call if_changed_dep,cpp_lds)
  1353. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  1354. quiet_cmd_u-boot_payload ?= LD $@
  1355. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  1356. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  1357. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  1358. $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
  1359. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  1360. $(call if_changed,u-boot_payload)
  1361. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  1362. u-boot-payload.efi: u-boot-payload FORCE
  1363. $(call if_changed,zobjcopy)
  1364. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  1365. $(call if_changed,cat)
  1366. #Add a target to create boot binary having SPL binary in PBI format
  1367. #concatenated with u-boot binary. It is need by PowerPC SoC having
  1368. #internal SRAM <= 512KB.
  1369. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1370. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  1371. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  1372. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  1373. $(call if_changed,mkimage)
  1374. ifeq ($(ARCH),arm)
  1375. UBOOT_BINLOAD := u-boot.img
  1376. else
  1377. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1378. UBOOT_BINLOAD := u-boot-with-dtb.bin
  1379. else
  1380. UBOOT_BINLOAD := u-boot.bin
  1381. endif
  1382. endif
  1383. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1384. --gap-fill=0xff
  1385. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  1386. $(call if_changed,pad_cat)
  1387. # PPC4xx needs the SPL at the end of the image, since the reset vector
  1388. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  1389. # and need to introduce a new build target with the full blown U-Boot
  1390. # at the start padded up to the start of the SPL image. And then concat
  1391. # the SPL image to the end.
  1392. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  1393. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  1394. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  1395. $(call if_changed,pad_cat)
  1396. quiet_cmd_u-boot-elf ?= LD $@
  1397. cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
  1398. -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
  1399. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  1400. u-boot.elf: u-boot.bin u-boot-elf.lds
  1401. $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
  1402. $(call if_changed,u-boot-elf)
  1403. u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
  1404. $(call if_changed_dep,cpp_lds)
  1405. # MediaTek's ARM-based u-boot needs a header to contains its load address
  1406. # which is parsed by the BootROM.
  1407. # If the SPL build is enabled, the header will be added to the spl binary,
  1408. # and the spl binary and the u-boot.img will be combined into one file.
  1409. # Otherwise the header will be added to the u-boot.bin directly.
  1410. ifeq ($(CONFIG_SPL),y)
  1411. spl/u-boot-spl-mtk.bin: spl/u-boot-spl
  1412. u-boot-mtk.bin: u-boot-with-spl.bin
  1413. $(call if_changed,copy)
  1414. else
  1415. MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
  1416. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1417. -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
  1418. u-boot-mtk.bin: u-boot.bin FORCE
  1419. $(call if_changed,mkimage)
  1420. endif
  1421. quiet_cmd_endian_swap = SWAP $@
  1422. cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
  1423. u-boot-swap.bin: u-boot.bin FORCE
  1424. $(call if_changed,endian_swap)
  1425. ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
  1426. # Generate linker list symbols references to force compiler to not optimize
  1427. # them away when compiling with LTO
  1428. ifdef CONFIG_LTO
  1429. u-boot-keep-syms-lto := keep-syms-lto.o
  1430. u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
  1431. quiet_cmd_keep_syms_lto = KSL $@
  1432. cmd_keep_syms_lto = \
  1433. NM=$(NM) $(srctree)/scripts/gen_ll_addressable_symbols.sh $^ >$@
  1434. quiet_cmd_keep_syms_lto_cc = KSLCC $@
  1435. cmd_keep_syms_lto_cc = \
  1436. $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
  1437. $(u-boot-keep-syms-lto_c): $(u-boot-main)
  1438. $(call if_changed,keep_syms_lto)
  1439. $(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
  1440. $(call if_changed,keep_syms_lto_cc)
  1441. else
  1442. u-boot-keep-syms-lto :=
  1443. endif
  1444. # Rule to link u-boot
  1445. # May be overridden by arch/$(ARCH)/config.mk
  1446. ifdef CONFIG_LTO
  1447. quiet_cmd_u-boot__ ?= LTO $@
  1448. cmd_u-boot__ ?= \
  1449. $(CC) -nostdlib -nostartfiles \
  1450. $(LTO_FINAL_LDFLAGS) $(c_flags) \
  1451. $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
  1452. -T u-boot.lds $(u-boot-init) \
  1453. -Wl,--whole-archive \
  1454. $(u-boot-main) \
  1455. $(u-boot-keep-syms-lto) \
  1456. $(PLATFORM_LIBS) \
  1457. -Wl,--no-whole-archive \
  1458. -Wl,-Map,u-boot.map; \
  1459. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1460. else
  1461. quiet_cmd_u-boot__ ?= LD $@
  1462. cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  1463. -T u-boot.lds $(u-boot-init) \
  1464. --whole-archive \
  1465. $(u-boot-main) \
  1466. --no-whole-archive \
  1467. $(PLATFORM_LIBS) -Map u-boot.map; \
  1468. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1469. endif
  1470. quiet_cmd_smap = GEN common/system_map.o
  1471. cmd_smap = \
  1472. smap=`$(call SYSTEM_MAP,u-boot) | \
  1473. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  1474. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  1475. -c $(srctree)/common/system_map.c -o common/system_map.o
  1476. u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
  1477. +$(call if_changed,u-boot__)
  1478. ifeq ($(CONFIG_KALLSYMS),y)
  1479. $(call cmd,smap)
  1480. $(call cmd,u-boot__) common/system_map.o
  1481. endif
  1482. ifeq ($(CONFIG_RISCV),y)
  1483. @tools/prelink-riscv $@ 0
  1484. endif
  1485. quiet_cmd_sym ?= SYM $@
  1486. cmd_sym ?= $(OBJDUMP) -t $< > $@
  1487. u-boot.sym: u-boot FORCE
  1488. $(call if_changed,sym)
  1489. # The actual objects are generated when descending,
  1490. # make sure no implicit rule kicks in
  1491. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  1492. # Handle descending into subdirectories listed in $(u-boot-dirs)
  1493. # Preset locale variables to speed up the build process. Limit locale
  1494. # tweaks to this spot to avoid wrong language settings when running
  1495. # make menuconfig etc.
  1496. # Error messages still appears in the original language
  1497. PHONY += $(u-boot-dirs)
  1498. $(u-boot-dirs): prepare scripts
  1499. $(Q)$(MAKE) $(build)=$@
  1500. tools: prepare
  1501. # The "tools" are needed early
  1502. $(filter-out tools, $(u-boot-dirs)): tools
  1503. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  1504. # is "yes"), so compile examples after U-Boot is compiled.
  1505. examples: $(filter-out examples, $(u-boot-dirs))
  1506. define filechk_uboot.release
  1507. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1508. endef
  1509. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  1510. include/config/uboot.release: include/config/auto.conf FORCE
  1511. $(call filechk,uboot.release)
  1512. # Things we need to do before we recursively start building the kernel
  1513. # or the modules are listed in "prepare".
  1514. # A multi level approach is used. prepareN is processed before prepareN-1.
  1515. # archprepare is used in arch Makefiles and when processed asm symlink,
  1516. # version.h and scripts_basic is processed / created.
  1517. # Listed in dependency order
  1518. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1519. # prepare3 is used to check if we are building in a separate output directory,
  1520. # and if so do:
  1521. # 1) Check that make has not been executed in the kernel src $(srctree)
  1522. prepare3: include/config/uboot.release
  1523. ifneq ($(KBUILD_SRC),)
  1524. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1525. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1526. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1527. echo >&2 " in the '$(srctree)' directory.";\
  1528. /bin/false; \
  1529. fi;
  1530. endif
  1531. # prepare2 creates a makefile if using a separate output directory
  1532. prepare2: prepare3 outputmakefile cfg
  1533. prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \
  1534. include/config/auto.conf
  1535. ifeq ($(wildcard $(LDSCRIPT)),)
  1536. @echo >&2 " Could not find linker script."
  1537. @/bin/false
  1538. endif
  1539. ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
  1540. prepare1: $(defaultenv_h)
  1541. envtools: $(defaultenv_h)
  1542. endif
  1543. archprepare: prepare1 scripts_basic
  1544. prepare0: archprepare FORCE
  1545. $(Q)$(MAKE) $(build)=.
  1546. # All the preparing..
  1547. prepare: prepare0
  1548. # Generate some files
  1549. # ---------------------------------------------------------------------------
  1550. # Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
  1551. define filechk_version.h
  1552. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1553. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1554. echo \#define U_BOOT_VERSION_NUM $(VERSION); \
  1555. echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
  1556. sed -e "s/^0*//"); \
  1557. echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
  1558. echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
  1559. endef
  1560. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1561. # The BSD date on the other hand behaves different and would produce errors
  1562. # with the misused '-d' switch. Respect that and search a working date with
  1563. # well known pre- and suffixes for the GNU variant of date.
  1564. define filechk_timestamp.h
  1565. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1566. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1567. DATE=""; \
  1568. for date in gdate date.gnu date; do \
  1569. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1570. done; \
  1571. if test -n "$${DATE}"; then \
  1572. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1573. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1574. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1575. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1576. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
  1577. else \
  1578. return 42; \
  1579. fi; \
  1580. else \
  1581. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1582. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1583. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1584. LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1585. LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
  1586. fi)
  1587. endef
  1588. define filechk_defaultenv.h
  1589. ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
  1590. tr '\n' '\0' | \
  1591. sed -e 's/\\\x0\s*//g' | \
  1592. xxd -i ; )
  1593. endef
  1594. define filechk_dt.h
  1595. (if test -n "$${DEVICE_TREE}"; then \
  1596. echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
  1597. else \
  1598. echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
  1599. fi)
  1600. endef
  1601. $(version_h): include/config/uboot.release FORCE
  1602. $(call filechk,version.h)
  1603. $(timestamp_h): $(srctree)/Makefile FORCE
  1604. $(call filechk,timestamp.h)
  1605. $(dt_h): $(srctree)/Makefile FORCE
  1606. $(call filechk,dt.h)
  1607. $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
  1608. $(call filechk,defaultenv.h)
  1609. # ---------------------------------------------------------------------------
  1610. # Devicetree files
  1611. ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
  1612. dtstree := arch/$(SRCARCH)/boot/dts
  1613. endif
  1614. ifneq ($(dtstree),)
  1615. %.dtb: prepare3 scripts_dtc
  1616. $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
  1617. PHONY += dtbs dtbs_install
  1618. dtbs: prepare3 scripts_dtc
  1619. $(Q)$(MAKE) $(build)=$(dtstree)
  1620. dtbs_install:
  1621. $(Q)$(MAKE) $(dtbinst)=$(dtstree)
  1622. ifdef CONFIG_OF_EARLY_FLATTREE
  1623. all: dtbs
  1624. endif
  1625. endif
  1626. PHONY += scripts_dtc
  1627. scripts_dtc: scripts_basic
  1628. $(Q)$(MAKE) $(build)=scripts/dtc
  1629. # ---------------------------------------------------------------------------
  1630. quiet_cmd_cpp_lds = LDS $@
  1631. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
  1632. -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
  1633. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1634. $(call if_changed_dep,cpp_lds)
  1635. spl/u-boot-spl.bin: spl/u-boot-spl
  1636. @:
  1637. $(SPL_SIZE_CHECK)
  1638. spl/u-boot-spl-dtb.bin: spl/u-boot-spl
  1639. @:
  1640. spl/u-boot-spl-dtb.hex: spl/u-boot-spl
  1641. @:
  1642. spl/u-boot-spl: tools prepare \
  1643. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
  1644. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
  1645. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1646. spl/sunxi-spl.bin: spl/u-boot-spl
  1647. @:
  1648. spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
  1649. @:
  1650. spl/u-boot-spl.sfp: spl/u-boot-spl
  1651. @:
  1652. spl/boot.bin: spl/u-boot-spl
  1653. @:
  1654. tpl/u-boot-tpl.bin: tools prepare \
  1655. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
  1656. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1657. $(TPL_SIZE_CHECK)
  1658. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1659. FIND := find
  1660. FINDFLAGS := -L
  1661. tags ctags:
  1662. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1663. -name '*.[chS]' -print`
  1664. ln -s ctags tags
  1665. etags:
  1666. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1667. -name '*.[chS]' -print`
  1668. cscope:
  1669. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1670. cscope.files
  1671. @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
  1672. grep -xvf - cscope.files > cscope.files.no-symlinks; \
  1673. mv cscope.files.no-symlinks cscope.files
  1674. cscope -b -q -k
  1675. SYSTEM_MAP = \
  1676. $(NM) $1 | \
  1677. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1678. LC_ALL=C sort
  1679. System.map: u-boot
  1680. @$(call SYSTEM_MAP,$<) > $@
  1681. #########################################################################
  1682. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1683. # R_AARCH64_RELATIVE (64-bit).
  1684. checkarmreloc: u-boot
  1685. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1686. grep R_A | sort -u`"; \
  1687. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1688. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1689. echo "$< contains unexpected relocations: $$RELOC"; \
  1690. false; \
  1691. fi
  1692. tools/version.h: include/version.h
  1693. $(Q)mkdir -p $(dir $@)
  1694. $(call if_changed,copy)
  1695. envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1696. $(Q)$(MAKE) $(build)=tools/env
  1697. tools-only: export TOOLS_ONLY=y
  1698. tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1699. $(Q)$(MAKE) $(build)=tools
  1700. tools-all: export HOST_TOOLS_ALL=y
  1701. tools-all: envtools tools ;
  1702. cross_tools: export CROSS_BUILD_TOOLS=y
  1703. cross_tools: tools ;
  1704. .PHONY : CHANGELOG
  1705. CHANGELOG:
  1706. git log --no-merges U-Boot-1_1_5.. | \
  1707. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1708. #########################################################################
  1709. ###
  1710. # Cleaning is done on three levels.
  1711. # make clean Delete most generated files
  1712. # Leave enough to build external modules
  1713. # make mrproper Delete the current configuration, and all generated files
  1714. # make distclean Remove editor backup files, patch leftover files and the like
  1715. # Directories & files removed with 'make clean'
  1716. CLEAN_DIRS += $(MODVERDIR) \
  1717. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1718. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1719. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
  1720. boot* u-boot* MLO* SPL System.map fit-dtb.blob* \
  1721. u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
  1722. lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
  1723. idbloader.img flash.bin flash.log defconfig keep-syms-lto.c
  1724. # Directories & files removed with 'make mrproper'
  1725. MRPROPER_DIRS += include/config include/generated spl tpl \
  1726. .tmp_objdiff doc/output
  1727. # Remove include/asm symlink created by U-Boot before v2014.01
  1728. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1729. ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
  1730. drivers/video/fonts/*.S include/asm
  1731. # clean - Delete most, but leave enough to build external modules
  1732. #
  1733. clean: rm-dirs := $(CLEAN_DIRS)
  1734. clean: rm-files := $(CLEAN_FILES)
  1735. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1736. clean-dirs := $(addprefix _clean_, $(clean-dirs))
  1737. PHONY += $(clean-dirs) clean archclean
  1738. $(clean-dirs):
  1739. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1740. clean: $(clean-dirs)
  1741. $(call cmd,rmdirs)
  1742. $(call cmd,rmfiles)
  1743. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1744. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1745. -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
  1746. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1747. -o -name '*.lex.c' -o -name '*.tab.[ch]' \
  1748. -o -name '*.asn1.[ch]' \
  1749. -o -name '*.symtypes' -o -name 'modules.order' \
  1750. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1751. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1752. -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
  1753. -type f -print | xargs rm -f
  1754. # mrproper - Delete all generated files, including .config
  1755. #
  1756. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1757. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1758. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1759. PHONY += $(mrproper-dirs) mrproper archmrproper
  1760. $(mrproper-dirs):
  1761. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1762. mrproper: clean $(mrproper-dirs)
  1763. $(call cmd,rmdirs)
  1764. $(call cmd,rmfiles)
  1765. @rm -f arch/*/include/asm/arch
  1766. # distclean
  1767. #
  1768. PHONY += distclean
  1769. distclean: mrproper
  1770. @find $(srctree) $(RCS_FIND_IGNORE) \
  1771. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1772. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1773. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1774. -o -name '*.pyc' \) \
  1775. -type f -print | xargs rm -f
  1776. @rm -f boards.cfg CHANGELOG
  1777. backup:
  1778. F=`basename $(srctree)` ; cd .. ; \
  1779. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1780. help:
  1781. @echo 'Cleaning targets:'
  1782. @echo ' clean - Remove most generated files but keep the config'
  1783. @echo ' mrproper - Remove all generated files + config + various backup files'
  1784. @echo ' distclean - mrproper + remove editor backup and patch files'
  1785. @echo ''
  1786. @echo 'Configuration targets:'
  1787. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1788. @echo ''
  1789. @echo 'Test targets:'
  1790. @echo ''
  1791. @echo ' check - Run all automated tests that use sandbox'
  1792. @echo ' qcheck - Run quick automated tests that use sandbox'
  1793. @echo ' tcheck - Run quick automated tests on tools'
  1794. @echo ''
  1795. @echo 'Other generic targets:'
  1796. @echo ' all - Build all necessary images depending on configuration'
  1797. @echo ' tests - Build U-Boot for sandbox and run tests'
  1798. @echo '* u-boot - Build the bare u-boot'
  1799. @echo ' dir/ - Build all files in dir and below'
  1800. @echo ' dir/file.[oisS] - Build specified target only'
  1801. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1802. @echo ' (requires a recent binutils and recent build (System.map))'
  1803. @echo ' tags/ctags - Generate ctags file for editors'
  1804. @echo ' etags - Generate etags file for editors'
  1805. @echo ' cscope - Generate cscope index'
  1806. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1807. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1808. @echo " cfg - Don't build, just create the .cfg files"
  1809. @echo " envtools - Build only the target-side environment tools"
  1810. @echo ''
  1811. @echo 'Static analysers'
  1812. @echo ' checkstack - Generate a list of stack hogs'
  1813. @echo ' coccicheck - Execute static code analysis with Coccinelle'
  1814. @echo ''
  1815. @echo 'Documentation targets:'
  1816. @$(MAKE) -f $(srctree)/doc/Makefile dochelp
  1817. @echo ''
  1818. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1819. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1820. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1821. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1822. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1823. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1824. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1825. @echo ' 1: warnings which may be relevant and do not occur too often'
  1826. @echo ' 2: warnings which occur quite often but may still be relevant'
  1827. @echo ' 3: more obscure warnings, can most likely be ignored'
  1828. @echo ' Multiple levels can be combined with W=12 or W=123'
  1829. @echo ''
  1830. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1831. @echo 'For further info see the ./README file'
  1832. tests check:
  1833. $(srctree)/test/run
  1834. qcheck:
  1835. $(srctree)/test/run quick
  1836. tcheck:
  1837. $(srctree)/test/run tools
  1838. # Documentation targets
  1839. # ---------------------------------------------------------------------------
  1840. DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
  1841. linkcheckdocs dochelp refcheckdocs
  1842. PHONY += $(DOC_TARGETS)
  1843. $(DOC_TARGETS): scripts_basic FORCE
  1844. $(Q)$(MAKE) $(build)=doc $@
  1845. PHONY += checkstack ubootrelease ubootversion
  1846. checkstack:
  1847. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1848. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1849. ubootrelease:
  1850. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1851. ubootversion:
  1852. @echo $(UBOOTVERSION)
  1853. # Single targets
  1854. # ---------------------------------------------------------------------------
  1855. # Single targets are compatible with:
  1856. # - build with mixed source and output
  1857. # - build with separate output dir 'make O=...'
  1858. # - external modules
  1859. #
  1860. # target-dir => where to store outputfile
  1861. # build-dir => directory in kernel source tree to use
  1862. ifeq ($(KBUILD_EXTMOD),)
  1863. build-dir = $(patsubst %/,%,$(dir $@))
  1864. target-dir = $(dir $@)
  1865. else
  1866. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1867. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1868. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1869. endif
  1870. %.s: %.c prepare scripts FORCE
  1871. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1872. %.i: %.c prepare scripts FORCE
  1873. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1874. %.o: %.c prepare scripts FORCE
  1875. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1876. %.lst: %.c prepare scripts FORCE
  1877. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1878. %.s: %.S prepare scripts FORCE
  1879. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1880. %.o: %.S prepare scripts FORCE
  1881. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1882. %.symtypes: %.c prepare scripts FORCE
  1883. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1884. # Modules
  1885. /: prepare scripts FORCE
  1886. $(cmd_crmodverdir)
  1887. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1888. $(build)=$(build-dir)
  1889. %/: prepare scripts FORCE
  1890. $(cmd_crmodverdir)
  1891. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1892. $(build)=$(build-dir)
  1893. %.ko: prepare scripts FORCE
  1894. $(cmd_crmodverdir)
  1895. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1896. $(build)=$(build-dir) $(@:.ko=.o)
  1897. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1898. quiet_cmd_genenv = GENENV $@
  1899. cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
  1900. sed --in-place -e 's/\x00/\x0A/g' $@
  1901. u-boot-initial-env: u-boot.bin
  1902. $(call if_changed,genenv)
  1903. # Consistency checks
  1904. # ---------------------------------------------------------------------------
  1905. PHONY += coccicheck
  1906. coccicheck:
  1907. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
  1908. # FIXME Should go into a make.lib or something
  1909. # ===========================================================================
  1910. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1911. cmd_rmdirs = rm -rf $(rm-dirs)
  1912. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1913. cmd_rmfiles = rm -f $(rm-files)
  1914. # read all saved command lines
  1915. cmd_files := $(wildcard .*.cmd)
  1916. ifneq ($(cmd_files),)
  1917. $(cmd_files): ; # Do not try to update included dependency files
  1918. include $(cmd_files)
  1919. endif
  1920. endif #ifeq ($(config-targets),1)
  1921. endif #ifeq ($(mixed-targets),1)
  1922. endif # skip-makefile
  1923. PHONY += FORCE
  1924. FORCE:
  1925. # Declare the contents of the PHONY variable as phony. We keep that
  1926. # information in a variable so we can use it in if_changed and friends.
  1927. .PHONY: $(PHONY)