Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header %!s(int64=3) %!d(string=hai) anos
..
Kconfig c9e40e65e1 board/liteboard: Add support for liteBoard %!s(int64=7) %!d(string=hai) anos
MAINTAINERS c9e40e65e1 board/liteboard: Add support for liteBoard %!s(int64=7) %!d(string=hai) anos
Makefile 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style %!s(int64=6) %!d(string=hai) anos
README c9e40e65e1 board/liteboard: Add support for liteBoard %!s(int64=7) %!d(string=hai) anos
board.c 401d1c4f5d common: Drop asm/global_data.h from common header %!s(int64=3) %!d(string=hai) anos

README

How to use U-Boot on Grinn's liteBoard
--------------------------------------

- Build U-Boot for liteBoard:

$ make mrproper
$ make liteboard_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the micro SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the micro SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Jumper settings:

S1: 0 1 0 1 1 1

where 0 means bottom position and 1 means top position (from the
switch label numbers reference).

- Insert the micro SD card in the board.

- Connect USB cable between liteBoard and the PC for the power and console.

- U-Boot messages should come up.