Fabio Estevam c280ec210f udoo: Call gpio_request() пре 2 година
..
neo 392aa4ba96 udoo: neo: Do not print the Model information пре 2 година
Kconfig f20562e4c4 mx6: remove SYS_SOC from board Kconfig пре 8 година
MAINTAINERS aeee33d6e0 MAINTAINERS: Use my personal e-mail address пре 3 година
Makefile 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style пре 6 година
README 5b0d03b306 udoo: Add a README file пре 7 година
udoo.c c280ec210f udoo: Call gpio_request() пре 2 година
udoo_spl.c 11907cb5cf udoo_spl: Initialize the eSDHC controller in SPL пре 2 година

README

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.