Makefile 73 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229
  1. # SPDX-License-Identifier: GPL-2.0+
  2. VERSION = 2021
  3. PATCHLEVEL = 04
  4. SUBLEVEL =
  5. EXTRAVERSION =
  6. NAME =
  7. # *DOCUMENTATION*
  8. # To see a list of typical targets execute "make help"
  9. # More info can be located in ./README
  10. # Comments in this file are targeted only to the developer, do not
  11. # expect to learn how to build the kernel reading this file.
  12. # o Do not use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour);
  14. # o Look for make include files relative to root of kernel src
  15. MAKEFLAGS += -rR --include-dir=$(CURDIR)
  16. # Determine host architecture
  17. include include/host_arch.h
  18. MK_ARCH="${shell uname -m}"
  19. unexport HOST_ARCH
  20. ifeq ("x86_64", $(MK_ARCH))
  21. export HOST_ARCH=$(HOST_ARCH_X86_64)
  22. else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
  23. export HOST_ARCH=$(HOST_ARCH_X86)
  24. else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
  25. export HOST_ARCH=$(HOST_ARCH_AARCH64)
  26. else ifeq ("armv7l", $(MK_ARCH))
  27. export HOST_ARCH=$(HOST_ARCH_ARM)
  28. else ifeq ("riscv32", $(MK_ARCH))
  29. export HOST_ARCH=$(HOST_ARCH_RISCV32)
  30. else ifeq ("riscv64", $(MK_ARCH))
  31. export HOST_ARCH=$(HOST_ARCH_RISCV64)
  32. endif
  33. undefine MK_ARCH
  34. # Avoid funny character set dependencies
  35. unexport LC_ALL
  36. LC_COLLATE=C
  37. LC_NUMERIC=C
  38. export LC_COLLATE LC_NUMERIC
  39. # Avoid interference with shell env settings
  40. unexport GREP_OPTIONS
  41. # We are using a recursive build, so we need to do a little thinking
  42. # to get the ordering right.
  43. #
  44. # Most importantly: sub-Makefiles should only ever modify files in
  45. # their own directory. If in some directory we have a dependency on
  46. # a file in another dir (which doesn't happen often, but it's often
  47. # unavoidable when linking the built-in.o targets which finally
  48. # turn into vmlinux), we will call a sub make in that other dir, and
  49. # after that we are sure that everything which is in that other dir
  50. # is now up to date.
  51. #
  52. # The only cases where we need to modify files which have global
  53. # effects are thus separated out and done before the recursive
  54. # descending is started. They are now explicitly listed as the
  55. # prepare rule.
  56. # Beautify output
  57. # ---------------------------------------------------------------------------
  58. #
  59. # Normally, we echo the whole command before executing it. By making
  60. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  61. # $(quiet) to choose other forms of output instead, e.g.
  62. #
  63. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  64. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  65. #
  66. # If $(quiet) is empty, the whole command will be printed.
  67. # If it is set to "quiet_", only the short version will be printed.
  68. # If it is set to "silent_", nothing will be printed at all, since
  69. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  70. #
  71. # A simple variant is to prefix commands with $(Q) - that's useful
  72. # for commands that shall be hidden in non-verbose mode.
  73. #
  74. # $(Q)ln $@ :<
  75. #
  76. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  77. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  78. #
  79. # To put more focus on warnings, be less verbose as default
  80. # Use 'make V=1' to see the full commands
  81. ifeq ("$(origin V)", "command line")
  82. KBUILD_VERBOSE = $(V)
  83. endif
  84. ifndef KBUILD_VERBOSE
  85. KBUILD_VERBOSE = 0
  86. endif
  87. ifeq ($(KBUILD_VERBOSE),1)
  88. quiet =
  89. Q =
  90. else
  91. quiet=quiet_
  92. Q = @
  93. endif
  94. # If the user is running make -s (silent mode), suppress echoing of
  95. # commands
  96. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  97. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  98. quiet=silent_
  99. endif
  100. else # make-3.8x
  101. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  102. quiet=silent_
  103. endif
  104. endif
  105. export quiet Q KBUILD_VERBOSE
  106. # kbuild supports saving output files in a separate directory.
  107. # To locate output files in a separate directory two syntaxes are supported.
  108. # In both cases the working directory must be the root of the kernel src.
  109. # 1) O=
  110. # Use "make O=dir/to/store/output/files/"
  111. #
  112. # 2) Set KBUILD_OUTPUT
  113. # Set the environment variable KBUILD_OUTPUT to point to the directory
  114. # where the output files shall be placed.
  115. # export KBUILD_OUTPUT=dir/to/store/output/files/
  116. # make
  117. #
  118. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  119. # variable.
  120. # KBUILD_SRC is set on invocation of make in OBJ directory
  121. # KBUILD_SRC is not intended to be used by the regular user (for now)
  122. ifeq ($(KBUILD_SRC),)
  123. # OK, Make called in directory where kernel src resides
  124. # Do we want to locate output files in a separate directory?
  125. ifeq ("$(origin O)", "command line")
  126. KBUILD_OUTPUT := $(O)
  127. endif
  128. # That's our default target when none is given on the command line
  129. PHONY := _all
  130. _all:
  131. # Cancel implicit rules on top Makefile
  132. $(CURDIR)/Makefile Makefile: ;
  133. ifneq ($(KBUILD_OUTPUT),)
  134. # Invoke a second make in the output directory, passing relevant variables
  135. # check that the output directory actually exists
  136. saved-output := $(KBUILD_OUTPUT)
  137. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  138. && /bin/pwd)
  139. $(if $(KBUILD_OUTPUT),, \
  140. $(error failed to create output directory "$(saved-output)"))
  141. PHONY += $(MAKECMDGOALS) sub-make
  142. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  143. @:
  144. sub-make: FORCE
  145. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  146. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  147. # Leave processing to above invocation of make
  148. skip-makefile := 1
  149. endif # ifneq ($(KBUILD_OUTPUT),)
  150. endif # ifeq ($(KBUILD_SRC),)
  151. # We process the rest of the Makefile if this is the final invocation of make
  152. ifeq ($(skip-makefile),)
  153. # Do not print "Entering directory ...",
  154. # but we want to display it when entering to the output directory
  155. # so that IDEs/editors are able to understand relative filenames.
  156. MAKEFLAGS += --no-print-directory
  157. # Call a source code checker (by default, "sparse") as part of the
  158. # C compilation.
  159. #
  160. # Use 'make C=1' to enable checking of only re-compiled files.
  161. # Use 'make C=2' to enable checking of *all* source files, regardless
  162. # of whether they are re-compiled or not.
  163. #
  164. # See the file "doc/sparse.txt" for more details, including
  165. # where to get the "sparse" utility.
  166. ifeq ("$(origin C)", "command line")
  167. KBUILD_CHECKSRC = $(C)
  168. endif
  169. ifndef KBUILD_CHECKSRC
  170. KBUILD_CHECKSRC = 0
  171. endif
  172. # Use make M=dir to specify directory of external module to build
  173. # Old syntax make ... SUBDIRS=$PWD is still supported
  174. # Setting the environment variable KBUILD_EXTMOD take precedence
  175. ifdef SUBDIRS
  176. KBUILD_EXTMOD ?= $(SUBDIRS)
  177. endif
  178. ifeq ("$(origin M)", "command line")
  179. KBUILD_EXTMOD := $(M)
  180. endif
  181. # If building an external module we do not care about the all: rule
  182. # but instead _all depend on modules
  183. PHONY += all
  184. ifeq ($(KBUILD_EXTMOD),)
  185. _all: all
  186. else
  187. _all: modules
  188. endif
  189. ifeq ($(KBUILD_SRC),)
  190. # building in the source tree
  191. srctree := .
  192. else
  193. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  194. # building in a subdirectory of the source tree
  195. srctree := ..
  196. else
  197. srctree := $(KBUILD_SRC)
  198. endif
  199. endif
  200. objtree := .
  201. src := $(srctree)
  202. obj := $(objtree)
  203. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  204. export srctree objtree VPATH
  205. # Make sure CDPATH settings don't interfere
  206. unexport CDPATH
  207. #########################################################################
  208. HOSTARCH := $(shell uname -m | \
  209. sed -e s/i.86/x86/ \
  210. -e s/sun4u/sparc64/ \
  211. -e s/arm.*/arm/ \
  212. -e s/sa110/arm/ \
  213. -e s/ppc64/powerpc/ \
  214. -e s/ppc/powerpc/ \
  215. -e s/macppc/powerpc/\
  216. -e s/sh.*/sh/)
  217. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  218. sed -e 's/\(cygwin\).*/cygwin/')
  219. export HOSTARCH HOSTOS
  220. #########################################################################
  221. # set default to nothing for native builds
  222. ifeq ($(HOSTARCH),$(ARCH))
  223. CROSS_COMPILE ?=
  224. endif
  225. KCONFIG_CONFIG ?= .config
  226. export KCONFIG_CONFIG
  227. # SHELL used by kbuild
  228. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  229. else if [ -x /bin/bash ]; then echo /bin/bash; \
  230. else echo sh; fi ; fi)
  231. HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
  232. HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
  233. HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
  234. HOSTCC = cc
  235. HOSTCXX = c++
  236. KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
  237. $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
  238. KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
  239. KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
  240. KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
  241. # With the move to GCC 6, we have implicitly upgraded our language
  242. # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
  243. # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
  244. # have older compilers as their default, so we make it explicit for
  245. # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
  246. CSTD_FLAG := -std=gnu11
  247. ifeq ($(HOSTOS),linux)
  248. KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
  249. endif
  250. ifeq ($(HOSTOS),cygwin)
  251. KBUILD_HOSTCFLAGS += -ansi
  252. endif
  253. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  254. # generates numerous errors and warnings. We want to bypass it
  255. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  256. # option to the compiler. Note that the -traditional-cpp flag
  257. # DOES NOT have the same semantics as GNU C's flag, all it does
  258. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  259. #
  260. # Apple's linker is similar, thanks to the new 2 stage linking
  261. # multiple symbol definitions are treated as errors, hence the
  262. # -multiply_defined suppress option to turn off this error.
  263. #
  264. ifeq ($(HOSTOS),darwin)
  265. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  266. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  267. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  268. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  269. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  270. os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
  271. $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  272. # Snow Leopards build environment has no longer restrictions as described above
  273. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  274. KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  275. KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  276. # macOS Mojave (10.14.X)
  277. # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
  278. KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
  279. endif
  280. # Decide whether to build built-in, modular, or both.
  281. # Normally, just do built-in.
  282. KBUILD_MODULES :=
  283. KBUILD_BUILTIN := 1
  284. # If we have only "make modules", don't compile built-in objects.
  285. # When we're building modules with modversions, we need to consider
  286. # the built-in objects during the descend as well, in order to
  287. # make sure the checksums are up to date before we record them.
  288. ifeq ($(MAKECMDGOALS),modules)
  289. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  290. endif
  291. # If we have "make <whatever> modules", compile modules
  292. # in addition to whatever we do anyway.
  293. # Just "make" or "make all" shall build modules as well
  294. # U-Boot does not need modules
  295. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  296. # KBUILD_MODULES := 1
  297. #endif
  298. #ifeq ($(MAKECMDGOALS),)
  299. # KBUILD_MODULES := 1
  300. #endif
  301. # Check ths size of a binary:
  302. # Args:
  303. # $1: File to check
  304. # #2: Size limit in bytes (decimal or 0xhex)
  305. define size_check
  306. actual=$$( wc -c $1 | awk '{print $$1}'); \
  307. limit=$$( printf "%d" $2 ); \
  308. if test $$actual -gt $$limit; then \
  309. echo "$1 exceeds file size limit:" >&2; \
  310. echo " limit: $$(printf %#x $$limit) bytes" >&2; \
  311. echo " actual: $$(printf %#x $$actual) bytes" >&2; \
  312. echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
  313. exit 1; \
  314. fi
  315. endef
  316. export size_check
  317. export KBUILD_MODULES KBUILD_BUILTIN
  318. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  319. # We need some generic definitions (do not try to remake the file).
  320. scripts/Kbuild.include: ;
  321. include scripts/Kbuild.include
  322. # Make variables (CC, etc...)
  323. AS = $(CROSS_COMPILE)as
  324. # Always use GNU ld
  325. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  326. LD = $(CROSS_COMPILE)ld.bfd
  327. else
  328. LD = $(CROSS_COMPILE)ld
  329. endif
  330. CC = $(CROSS_COMPILE)gcc
  331. CPP = $(CC) -E
  332. AR = $(CROSS_COMPILE)ar
  333. NM = $(CROSS_COMPILE)nm
  334. LDR = $(CROSS_COMPILE)ldr
  335. STRIP = $(CROSS_COMPILE)strip
  336. OBJCOPY = $(CROSS_COMPILE)objcopy
  337. OBJDUMP = $(CROSS_COMPILE)objdump
  338. LEX = flex
  339. YACC = bison
  340. AWK = awk
  341. PERL = perl
  342. PYTHON ?= python
  343. PYTHON2 = python2
  344. PYTHON3 = python3
  345. DTC ?= $(objtree)/scripts/dtc/dtc
  346. CHECK = sparse
  347. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  348. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  349. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  350. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  351. -Wno-format-security \
  352. -fno-builtin -ffreestanding $(CSTD_FLAG)
  353. KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
  354. KBUILD_AFLAGS := -D__ASSEMBLY__
  355. KBUILD_LDFLAGS :=
  356. ifeq ($(cc-name),clang)
  357. ifneq ($(CROSS_COMPILE),)
  358. CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
  359. GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
  360. CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
  361. GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
  362. endif
  363. ifneq ($(GCC_TOOLCHAIN),)
  364. CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
  365. endif
  366. KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  367. KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  368. KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
  369. KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
  370. endif
  371. # Don't generate position independent code
  372. KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
  373. KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
  374. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  375. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  376. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  377. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  378. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  379. export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
  380. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
  381. export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
  382. export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
  383. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
  384. export KBUILD_CFLAGS KBUILD_AFLAGS
  385. export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
  386. # When compiling out-of-tree modules, put MODVERDIR in the module
  387. # tree rather than in the kernel tree. The kernel tree might
  388. # even be read-only.
  389. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  390. # Files to ignore in find ... statements
  391. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  392. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  393. -prune -o
  394. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  395. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  396. # ===========================================================================
  397. # Rules shared between *config targets and build targets
  398. # Basic helpers built in scripts/
  399. PHONY += scripts_basic
  400. scripts_basic:
  401. $(Q)$(MAKE) $(build)=scripts/basic
  402. $(Q)rm -f .tmp_quiet_recordmcount
  403. # To avoid any implicit rule to kick in, define an empty command.
  404. scripts/basic/%: scripts_basic ;
  405. PHONY += outputmakefile
  406. # outputmakefile generates a Makefile in the output directory, if using a
  407. # separate output directory. This allows convenient use of make in the
  408. # output directory.
  409. outputmakefile:
  410. ifneq ($(KBUILD_SRC),)
  411. $(Q)ln -fsn $(srctree) source
  412. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
  413. $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
  414. endif
  415. # To make sure we do not include .config for any of the *config targets
  416. # catch them early, and hand them over to scripts/kconfig/Makefile
  417. # It is allowed to specify more targets when calling make, including
  418. # mixing *config targets and build targets.
  419. # For example 'make oldconfig all'.
  420. # Detect when mixed targets is specified, and make a second invocation
  421. # of make so .config is not included in this case either (for *config).
  422. version_h := include/generated/version_autogenerated.h
  423. timestamp_h := include/generated/timestamp_autogenerated.h
  424. defaultenv_h := include/generated/defaultenv_autogenerated.h
  425. dt_h := include/generated/dt.h
  426. no-dot-config-targets := clean clobber mrproper distclean \
  427. help %docs check% coccicheck \
  428. ubootversion backup tests check qcheck tcheck
  429. config-targets := 0
  430. mixed-targets := 0
  431. dot-config := 1
  432. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  433. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  434. dot-config := 0
  435. endif
  436. endif
  437. ifeq ($(KBUILD_EXTMOD),)
  438. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  439. config-targets := 1
  440. ifneq ($(words $(MAKECMDGOALS)),1)
  441. mixed-targets := 1
  442. endif
  443. endif
  444. endif
  445. ifeq ($(mixed-targets),1)
  446. # ===========================================================================
  447. # We're called with mixed targets (*config and build targets).
  448. # Handle them one by one.
  449. PHONY += $(MAKECMDGOALS) __build_one_by_one
  450. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  451. @:
  452. __build_one_by_one:
  453. $(Q)set -e; \
  454. for i in $(MAKECMDGOALS); do \
  455. $(MAKE) -f $(srctree)/Makefile $$i; \
  456. done
  457. else
  458. ifeq ($(config-targets),1)
  459. # ===========================================================================
  460. # *config targets only - make sure prerequisites are updated, and descend
  461. # in scripts/kconfig to make the *config target
  462. KBUILD_DEFCONFIG := sandbox_defconfig
  463. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  464. config: scripts_basic outputmakefile FORCE
  465. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  466. %config: scripts_basic outputmakefile FORCE
  467. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  468. else
  469. # ===========================================================================
  470. # Build targets only - this includes vmlinux, arch specific targets, clean
  471. # targets and others. In general all targets except *config targets.
  472. # Additional helpers built in scripts/
  473. # Carefully list dependencies so we do not try to build scripts twice
  474. # in parallel
  475. PHONY += scripts
  476. scripts: scripts_basic include/config/auto.conf
  477. $(Q)$(MAKE) $(build)=$(@)
  478. ifeq ($(dot-config),1)
  479. # Read in config
  480. -include include/config/auto.conf
  481. # Read in dependencies to all Kconfig* files, make sure to run
  482. # oldconfig if changes are detected.
  483. -include include/config/auto.conf.cmd
  484. # To avoid any implicit rule to kick in, define an empty command
  485. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  486. # If .config is newer than include/config/auto.conf, someone tinkered
  487. # with it and forgot to run make oldconfig.
  488. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  489. # we execute the config step to be sure to catch updated Kconfig files
  490. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  491. $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
  492. @# If the following part fails, include/config/auto.conf should be
  493. @# deleted so "make silentoldconfig" will be re-run on the next build.
  494. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  495. { rm -f include/config/auto.conf; false; }
  496. @# include/config.h has been updated after "make silentoldconfig".
  497. @# We need to touch include/config/auto.conf so it gets newer
  498. @# than include/config.h.
  499. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  500. $(Q)touch include/config/auto.conf
  501. u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
  502. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
  503. -include include/autoconf.mk
  504. -include include/autoconf.mk.dep
  505. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  506. # is up-to-date. When we switch to a different board configuration, old CONFIG
  507. # macros are still remaining in include/config/auto.conf. Without the following
  508. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  509. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  510. ifneq ($(wildcard include/config/auto.conf),)
  511. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  512. include/config/auto.conf)
  513. ifeq ($(autoconf_is_old),)
  514. include config.mk
  515. include arch/$(ARCH)/Makefile
  516. endif
  517. endif
  518. endif
  519. # These are set by the arch-specific config.mk. Make sure they are exported
  520. # so they can be used when building an EFI application.
  521. export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
  522. export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
  523. export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
  524. export CFLAGS_EFI # Compiler flags to add when building EFI app
  525. export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
  526. export EFI_TARGET # binutils target if EFI is natively supported
  527. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  528. # that (or fail if absent). Otherwise, search for a linker script in a
  529. # standard location.
  530. ifndef LDSCRIPT
  531. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  532. ifdef CONFIG_SYS_LDSCRIPT
  533. # need to strip off double quotes
  534. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  535. endif
  536. endif
  537. # If there is no specified link script, we look in a number of places for it
  538. ifndef LDSCRIPT
  539. ifeq ($(wildcard $(LDSCRIPT)),)
  540. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  541. endif
  542. ifeq ($(wildcard $(LDSCRIPT)),)
  543. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  544. endif
  545. ifeq ($(wildcard $(LDSCRIPT)),)
  546. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  547. endif
  548. endif
  549. else
  550. # Dummy target needed, because used as prerequisite
  551. include/config/auto.conf: ;
  552. endif # $(dot-config)
  553. #
  554. # Xtensa linker script cannot be preprocessed with -ansi because of
  555. # preprocessor operations on strings that don't make C identifiers.
  556. #
  557. ifeq ($(CONFIG_XTENSA),)
  558. LDPPFLAGS += -ansi
  559. endif
  560. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  561. KBUILD_CFLAGS += -Os
  562. else
  563. KBUILD_CFLAGS += -O2
  564. endif
  565. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  566. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  567. # disable stringop warnings in gcc 8+
  568. KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
  569. # Enabled with W=2, disabled by default as noisy
  570. KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
  571. # change __FILE__ to the relative path from the srctree
  572. KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
  573. KBUILD_CFLAGS += -g
  574. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  575. # option to the assembler.
  576. KBUILD_AFLAGS += -g
  577. # Report stack usage if supported
  578. # ARC tools based on GCC 7.1 has an issue with stack usage
  579. # with naked functions, see commit message for more details
  580. ifndef CONFIG_ARC
  581. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  582. KBUILD_CFLAGS += -fstack-usage
  583. endif
  584. endif
  585. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  586. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  587. ifeq ($(cc-name),clang)
  588. KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
  589. KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
  590. KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
  591. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  592. # Quiet clang warning: comparison of unsigned expression < 0 is always false
  593. KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
  594. # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
  595. # source of a reference will be _MergedGlobals and not on of the whitelisted names.
  596. # See modpost pattern 2
  597. KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
  598. KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
  599. else
  600. # These warnings generated too much noise in a regular build.
  601. # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
  602. KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
  603. endif
  604. # Prohibit date/time macros, which would make the build non-deterministic
  605. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  606. include scripts/Makefile.extrawarn
  607. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  608. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  609. KBUILD_AFLAGS += $(KAFLAGS)
  610. KBUILD_CFLAGS += $(KCFLAGS)
  611. KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
  612. # Use UBOOTINCLUDE when you must reference the include/ directory.
  613. # Needed to be compatible with the O= option
  614. UBOOTINCLUDE := \
  615. -Iinclude \
  616. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  617. $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
  618. $(if $(CONFIG_HAS_THUMB2), \
  619. $(if $(CONFIG_CPU_V7M), \
  620. -I$(srctree)/arch/arm/thumb1/include), \
  621. -I$(srctree)/arch/arm/thumb1/include)) \
  622. -I$(srctree)/arch/$(ARCH)/include \
  623. -include $(srctree)/include/linux/kconfig.h
  624. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  625. # FIX ME
  626. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  627. $(NOSTDINC_FLAGS)
  628. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  629. #########################################################################
  630. # U-Boot objects....order is important (i.e. start must be first)
  631. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  632. libs-y += lib/
  633. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  634. libs-$(CONFIG_OF_EMBED) += dts/
  635. libs-y += fs/
  636. libs-y += net/
  637. libs-y += disk/
  638. libs-y += drivers/
  639. libs-y += drivers/dma/
  640. libs-y += drivers/gpio/
  641. libs-y += drivers/i2c/
  642. libs-y += drivers/net/
  643. libs-y += drivers/net/phy/
  644. libs-y += drivers/power/ \
  645. drivers/power/domain/ \
  646. drivers/power/fuel_gauge/ \
  647. drivers/power/mfd/ \
  648. drivers/power/pmic/ \
  649. drivers/power/battery/ \
  650. drivers/power/regulator/
  651. libs-y += drivers/spi/
  652. libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
  653. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  654. libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
  655. libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
  656. libs-y += drivers/serial/
  657. libs-y += drivers/usb/cdns3/
  658. libs-y += drivers/usb/dwc3/
  659. libs-y += drivers/usb/common/
  660. libs-y += drivers/usb/emul/
  661. libs-y += drivers/usb/eth/
  662. libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
  663. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
  664. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
  665. libs-y += drivers/usb/host/
  666. libs-y += drivers/usb/mtu3/
  667. libs-y += drivers/usb/musb/
  668. libs-y += drivers/usb/musb-new/
  669. libs-y += drivers/usb/phy/
  670. libs-y += drivers/usb/ulpi/
  671. libs-y += cmd/
  672. libs-y += common/
  673. libs-y += env/
  674. libs-$(CONFIG_API) += api/
  675. ifdef CONFIG_POST
  676. libs-y += post/
  677. endif
  678. libs-$(CONFIG_UNIT_TEST) += test/
  679. libs-$(CONFIG_UT_ENV) += test/env/
  680. libs-$(CONFIG_UT_OPTEE) += test/optee/
  681. libs-$(CONFIG_UT_OVERLAY) += test/overlay/
  682. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  683. libs-y := $(sort $(libs-y))
  684. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  685. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  686. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  687. u-boot-init := $(head-y)
  688. u-boot-main := $(libs-y)
  689. # Add GCC lib
  690. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  691. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  692. else
  693. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  694. endif
  695. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  696. ifdef CONFIG_CC_COVERAGE
  697. KBUILD_CFLAGS += --coverage
  698. PLATFORM_LIBGCC += -lgcov
  699. endif
  700. export PLATFORM_LIBS
  701. export PLATFORM_LIBGCC
  702. # Special flags for CPP when processing the linker script.
  703. # Pass the version down so we can handle backwards compatibility
  704. # on the fly.
  705. LDPPFLAGS += \
  706. -include $(srctree)/include/u-boot/u-boot.lds.h \
  707. -DCPUDIR=$(CPUDIR) \
  708. $(shell $(LD) --version | \
  709. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  710. #########################################################################
  711. #########################################################################
  712. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  713. BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
  714. else
  715. BOARD_SIZE_CHECK =
  716. endif
  717. ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
  718. SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
  719. else
  720. SPL_SIZE_CHECK =
  721. endif
  722. ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
  723. TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
  724. else
  725. TPL_SIZE_CHECK =
  726. endif
  727. # Statically apply RELA-style relocations (currently arm64 only)
  728. # This is useful for arm64 where static relocation needs to be performed on
  729. # the raw binary, but certain simulators only accept an ELF file (but don't
  730. # do the relocation).
  731. ifneq ($(CONFIG_STATIC_RELA),)
  732. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  733. quiet_cmd_static_rela = RELOC $@
  734. cmd_static_rela = \
  735. start=$$($(NM) $(2) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  736. end=$$($(NM) $(2) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  737. tools/relocate-rela $(3) $(4) $$start $$end
  738. else
  739. quiet_cmd_static_rela =
  740. cmd_static_rela =
  741. endif
  742. # Always append INPUTS so that arch config.mk's can add custom ones
  743. INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
  744. INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  745. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  746. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  747. else
  748. ifneq ($(CONFIG_NXP_ESBC), y)
  749. # For Secure Boot The Image needs to be signed and Header must also
  750. # be included. So The image has to be built explicitly
  751. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  752. endif
  753. endif
  754. INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
  755. ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
  756. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  757. else
  758. ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
  759. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  760. else
  761. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  762. endif
  763. endif
  764. INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  765. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  766. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  767. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  768. endif
  769. INPUTS-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  770. ifneq ($(CONFIG_SPL_TARGET),)
  771. INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  772. endif
  773. INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
  774. INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
  775. INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  776. # Generate this input file for binman
  777. ifeq ($(CONFIG_SPL),)
  778. INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
  779. endif
  780. # Add optional build target if defined in board/cpu/soc headers
  781. ifneq ($(CONFIG_BUILD_TARGET),)
  782. INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
  783. endif
  784. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  785. INPUTS-y += init_sp_bss_offset_check
  786. endif
  787. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  788. INPUTS-y += u-boot-with-dtb.bin
  789. endif
  790. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  791. # On ARM64 this target is produced by binman so we don't need this dep
  792. ifeq ($(CONFIG_ARM64),y)
  793. ifeq ($(CONFIG_SPL),y)
  794. # TODO: Get binman to generate this too
  795. INPUTS-y += u-boot-rockchip.bin
  796. endif
  797. else
  798. ifeq ($(CONFIG_SPL),y)
  799. # Generate these inputs for binman which will create the output files
  800. INPUTS-y += idbloader.img u-boot.img
  801. endif
  802. endif
  803. endif
  804. INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
  805. $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
  806. $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
  807. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  808. # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
  809. LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
  810. ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
  811. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  812. endif
  813. # insure the checker run with the right endianness
  814. CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
  815. # the checker needs the correct machine size
  816. CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
  817. # Normally we fill empty space with 0xff
  818. quiet_cmd_objcopy = OBJCOPY $@
  819. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  820. $(OBJCOPYFLAGS_$(@F)) $< $@
  821. # Provide a version which does not do this, for use by EFI
  822. quiet_cmd_zobjcopy = OBJCOPY $@
  823. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  824. quiet_cmd_efipayload = OBJCOPY $@
  825. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  826. MKIMAGEOUTPUT ?= /dev/null
  827. quiet_cmd_mkimage = MKIMAGE $@
  828. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  829. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  830. quiet_cmd_mkfitimage = MKIMAGE $@
  831. cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
  832. -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
  833. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  834. quiet_cmd_cat = CAT $@
  835. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  836. append = cat $(filter-out $< $(PHONY), $^) >> $@
  837. quiet_cmd_pad_cat = CAT $@
  838. cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
  839. quiet_cmd_lzma = LZMA $@
  840. cmd_lzma = lzma -c -z -k -9 $< > $@
  841. cfg: u-boot.cfg
  842. quiet_cmd_cfgcheck = CFGCHK $2
  843. cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
  844. $(srctree)/scripts/config_whitelist.txt $(srctree)
  845. # Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
  846. got = $(foreach cfg,$(1),$($(cfg)))
  847. # expected value 'y for each one
  848. expect = $(foreach cfg,$(1),y)
  849. # Show a deprecation message
  850. # Args:
  851. # 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
  852. # 2: Name of component (e.g . "Ethernet drivers")
  853. # 3: Release deadline (e.g. "v202.07")
  854. # 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
  855. # Note: Script avoids bash construct, hence the strange double 'if'
  856. # (patches welcome!)
  857. define deprecated
  858. @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
  859. echo >&2 "===================== WARNING ======================"; \
  860. echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
  861. echo >&2 "for $(2)). Please update the board to use"; \
  862. echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
  863. echo >&2 "update by the deadline may result in board removal."; \
  864. echo >&2 "See doc/driver-model/migration.rst for more info."; \
  865. echo >&2 "===================================================="; \
  866. fi; fi
  867. endef
  868. PHONY += inputs
  869. inputs: $(INPUTS-y)
  870. all: .binman_stamp inputs
  871. ifeq ($(CONFIG_BINMAN),y)
  872. $(call if_changed,binman)
  873. endif
  874. # Timestamp file to make sure that binman always runs
  875. .binman_stamp: FORCE
  876. @touch $@
  877. ifeq ($(CONFIG_DEPRECATED),y)
  878. $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
  879. endif
  880. ifeq ($(CONFIG_OF_EMBED),y)
  881. @echo >&2 "===================== WARNING ======================"
  882. @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
  883. @echo >&2 "be used for debugging purposes. Please use"
  884. @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
  885. @echo >&2 "See doc/README.fdt-control for more info."
  886. @echo >&2 "===================================================="
  887. endif
  888. ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
  889. @echo >&2 "===================== WARNING ======================"
  890. @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
  891. @echo >&2 "to binman instead, to avoid the proliferation of"
  892. @echo >&2 "arch-specific scripts with no tests."
  893. @echo >&2 "===================================================="
  894. endif
  895. ifneq ($(CONFIG_DM),y)
  896. @echo >&2 "===================== WARNING ======================"
  897. @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
  898. @echo >&2 "compulsory starting with the v2020.01 release."
  899. @echo >&2 "Failure to update may result in board removal."
  900. @echo >&2 "See doc/driver-model/migration.rst for more info."
  901. @echo >&2 "===================================================="
  902. endif
  903. $(call deprecated,CONFIG_DM_MMC CONFIG_BLK,MMC,v2019.04,$(CONFIG_MMC))
  904. $(call deprecated,CONFIG_DM_USB CONFIG_OF_CONTROL CONFIG_BLK,\
  905. USB,v2019.07,$(CONFIG_USB))
  906. $(call deprecated,CONFIG_AHCI,AHCI instead of CONFIG_MVSATA_IDE,v2019.07, \
  907. $(CONFIG_MVSATA_IDE))
  908. $(call deprecated,CONFIG_AHCI,AHCI,v2019.07, $(CONFIG_LIBATA))
  909. $(call deprecated,CONFIG_DM_PCI,PCI,v2019.07,$(CONFIG_PCI))
  910. $(call deprecated,CONFIG_DM_VIDEO,video,v2019.07,\
  911. $(CONFIG_LCD)$(CONFIG_VIDEO))
  912. $(call deprecated,CONFIG_DM_SPI_FLASH,SPI flash,v2019.07,\
  913. $(CONFIG_SPI_FLASH))
  914. $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
  915. $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
  916. $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
  917. $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_I2C))
  918. @# Check that this build does not use CONFIG options that we do not
  919. @# know about unless they are in Kconfig. All the existing CONFIG
  920. @# options are whitelisted, so new ones should not be added.
  921. $(call cmd,cfgcheck,u-boot.cfg)
  922. PHONY += dtbs
  923. dtbs: dts/dt.dtb
  924. @:
  925. dts/dt.dtb: u-boot
  926. $(Q)$(MAKE) $(build)=dts dtbs
  927. quiet_cmd_copy = COPY $@
  928. cmd_copy = cp $< $@
  929. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  930. ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
  931. FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
  932. else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
  933. FINAL_DTB_CONTAINER = fit-dtb.blob.gz
  934. else
  935. FINAL_DTB_CONTAINER = fit-dtb.blob
  936. endif
  937. fit-dtb.blob.gz: fit-dtb.blob
  938. @gzip -kf9 $< > $@
  939. fit-dtb.blob.lzo: fit-dtb.blob
  940. @lzop -f9 $< > $@
  941. fit-dtb.blob: dts/dt.dtb FORCE
  942. $(call if_changed,mkimage)
  943. ifneq ($(SOURCE_DATE_EPOCH),)
  944. touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
  945. chmod 0600 fit-dtb.blob
  946. endif
  947. MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  948. -a 0 -e 0 -E \
  949. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
  950. ifneq ($(EXT_DTB),)
  951. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
  952. $(call if_changed,cat)
  953. else
  954. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
  955. $(call if_changed,cat)
  956. endif
  957. u-boot.bin: u-boot-fit-dtb.bin FORCE
  958. $(call if_changed,copy)
  959. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  960. $(call if_changed,cat)
  961. else ifeq ($(CONFIG_OF_SEPARATE),y)
  962. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  963. $(call if_changed,cat)
  964. u-boot.bin: u-boot-dtb.bin FORCE
  965. $(call if_changed,copy)
  966. else
  967. u-boot.bin: u-boot-nodtb.bin FORCE
  968. $(call if_changed,copy)
  969. endif
  970. # we call Makefile in arch/arm/mach-imx which
  971. # has targets which are dependent on targets defined
  972. # here. make could not resolve them and we must ensure
  973. # that they are finished before calling imx targets
  974. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  975. IMX_DEPS = u-boot-fit-dtb.bin
  976. endif
  977. %.imx: $(IMX_DEPS) %.bin
  978. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  979. $(BOARD_SIZE_CHECK)
  980. %.vyb: %.imx
  981. $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
  982. quiet_cmd_copy = COPY $@
  983. cmd_copy = cp $< $@
  984. u-boot.dtb: dts/dt.dtb
  985. $(call cmd,copy)
  986. OBJCOPYFLAGS_u-boot.hex := -O ihex
  987. OBJCOPYFLAGS_u-boot.srec := -O srec
  988. u-boot.hex u-boot.srec: u-boot FORCE
  989. $(call if_changed,objcopy)
  990. OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
  991. u-boot-elf.srec: u-boot.elf FORCE
  992. $(call if_changed,objcopy)
  993. OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
  994. spl/u-boot-spl.srec: spl/u-boot-spl FORCE
  995. $(call if_changed,objcopy)
  996. %.scif: %.srec
  997. $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
  998. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  999. $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
  1000. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
  1001. binary_size_check: u-boot-nodtb.bin FORCE
  1002. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  1003. map_size=$(shell cat u-boot.map | \
  1004. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  1005. | sed 's/0X//g' \
  1006. | bc); \
  1007. if [ "" != "$$map_size" ]; then \
  1008. if test $$map_size -ne $$file_size; then \
  1009. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  1010. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  1011. exit 1; \
  1012. fi \
  1013. fi
  1014. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  1015. ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
  1016. subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
  1017. else
  1018. subtract_sys_malloc_f_len = true
  1019. endif
  1020. # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
  1021. # so low that the DTB could probably use 90%+ of the available space, for
  1022. # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
  1023. # safe for now and tweak this later if space becomes tight.
  1024. # A rejected alternative would be to check that some absolute minimum stack
  1025. # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
  1026. # deliberately build-specific, to take account of build-to-build stack usage
  1027. # differences due to different feature sets, there is no common absolute value
  1028. # to check against.
  1029. init_sp_bss_offset_check: u-boot.dtb FORCE
  1030. @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
  1031. space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
  1032. $(subtract_sys_malloc_f_len) ; \
  1033. quarter_space=$$(($${space} / 4)) ; \
  1034. if [ $${dtb_size} -gt $${quarter_space} ]; then \
  1035. echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
  1036. echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
  1037. exit 1 ; \
  1038. fi
  1039. endif
  1040. shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
  1041. quiet_cmd_objcopy_uboot = OBJCOPY $@
  1042. ifdef cmd_static_rela
  1043. cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
  1044. else
  1045. cmd_objcopy_uboot = $(cmd_objcopy)
  1046. endif
  1047. u-boot-nodtb.bin: u-boot FORCE
  1048. $(call if_changed,objcopy_uboot)
  1049. $(BOARD_SIZE_CHECK)
  1050. u-boot.ldr: u-boot
  1051. $(CREATE_LDR_ENV)
  1052. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  1053. $(BOARD_SIZE_CHECK)
  1054. # binman
  1055. # ---------------------------------------------------------------------------
  1056. # Use 'make BINMAN_DEBUG=1' to enable debugging
  1057. default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
  1058. quiet_cmd_binman = BINMAN $@
  1059. cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
  1060. --toolpath $(objtree)/tools \
  1061. $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
  1062. build -u -d u-boot.dtb -O . -m --allow-missing \
  1063. -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
  1064. -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
  1065. -a atf-bl31-path=${BL31} \
  1066. -a default-dt=$(default_dt) \
  1067. -a scp-path=$(SCP) \
  1068. $(BINMAN_$(@F))
  1069. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  1070. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  1071. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  1072. $(call if_changed,objcopy)
  1073. #
  1074. # U-Boot entry point, needed for booting of full-blown U-Boot
  1075. # from the SPL U-Boot version.
  1076. #
  1077. ifndef CONFIG_SYS_UBOOT_START
  1078. CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
  1079. endif
  1080. # Boards with more complex image requirements can provide an .its source file
  1081. # or a generator script
  1082. # NOTE: Please do not use this. We are migrating away from Makefile rules to use
  1083. # binman instead.
  1084. ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
  1085. U_BOOT_ITS := u-boot.its
  1086. $(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
  1087. $(call if_changed,copy)
  1088. else
  1089. ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
  1090. U_BOOT_ITS := u-boot.its
  1091. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
  1092. U_BOOT_ITS_DEPS += u-boot-nodtb.bin
  1093. endif
  1094. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
  1095. U_BOOT_ITS_DEPS += u-boot
  1096. endif
  1097. $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
  1098. $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
  1099. $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
  1100. endif
  1101. endif
  1102. ifdef CONFIG_SPL_LOAD_FIT
  1103. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1104. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1105. -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
  1106. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  1107. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
  1108. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
  1109. $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
  1110. else
  1111. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  1112. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1113. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1114. MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
  1115. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1116. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1117. u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
  1118. endif
  1119. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  1120. # Some boards have the kwbimage.cfg file written in advance, while some
  1121. # other boards generate it on the fly during the build in the build tree.
  1122. # Let's check if the file exists in the build tree first, otherwise we
  1123. # fall back to use the one in the source tree.
  1124. KWD_CONFIG_FILE = $(shell \
  1125. if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
  1126. echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1127. else \
  1128. echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1129. fi)
  1130. MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
  1131. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  1132. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
  1133. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1134. $(if $(KEYDIR),-k $(KEYDIR))
  1135. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1136. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  1137. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1138. UBOOT_BIN := u-boot-with-dtb.bin
  1139. else
  1140. UBOOT_BIN := u-boot.bin
  1141. endif
  1142. MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
  1143. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1144. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1145. u-boot.bin.lzma: u-boot.bin FORCE
  1146. $(call if_changed,lzma)
  1147. u-boot-lzma.img: u-boot.bin.lzma FORCE
  1148. $(call if_changed,mkimage)
  1149. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
  1150. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
  1151. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1152. ,$(UBOOT_BIN)) FORCE
  1153. $(call if_changed,mkimage)
  1154. $(BOARD_SIZE_CHECK)
  1155. ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
  1156. MKIMAGEFLAGS_u-boot.itb =
  1157. else
  1158. MKIMAGEFLAGS_u-boot.itb = -E
  1159. endif
  1160. ifdef U_BOOT_ITS
  1161. u-boot.itb: u-boot-nodtb.bin \
  1162. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1163. $(U_BOOT_ITS) FORCE
  1164. $(call if_changed,mkfitimage)
  1165. $(BOARD_SIZE_CHECK)
  1166. endif
  1167. u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
  1168. $(call if_changed,mkimage)
  1169. u-boot.sha1: u-boot.bin
  1170. tools/ubsha1 u-boot.bin
  1171. u-boot.dis: u-boot
  1172. $(OBJDUMP) -d $< > $@
  1173. ifneq ($(CONFIG_SPL_PAYLOAD),)
  1174. SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
  1175. else
  1176. SPL_PAYLOAD := u-boot.bin
  1177. endif
  1178. SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
  1179. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  1180. --pad-to=$(CONFIG_SPL_PAD_TO)
  1181. u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
  1182. $(call if_changed,pad_cat)
  1183. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  1184. # TPL + SPL
  1185. ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
  1186. MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
  1187. tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
  1188. $(call if_changed,mkimage)
  1189. idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
  1190. $(call if_changed,cat)
  1191. else
  1192. MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
  1193. idbloader.img: spl/u-boot-spl.bin FORCE
  1194. $(call if_changed,mkimage)
  1195. endif
  1196. ifeq ($(CONFIG_ARM64),y)
  1197. OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
  1198. --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
  1199. u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
  1200. $(call if_changed,pad_cat)
  1201. endif # CONFIG_ARM64
  1202. endif # CONFIG_ARCH_ROCKCHIP
  1203. ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
  1204. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  1205. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  1206. $(call if_changed,mkimage)
  1207. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1208. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  1209. $(call if_changed,objcopy)
  1210. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1211. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  1212. $(call if_changed,objcopy)
  1213. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  1214. $(call if_changed,cat)
  1215. endif
  1216. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  1217. --pad-to=$(CONFIG_TPL_PAD_TO)
  1218. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  1219. $(call if_changed,pad_cat)
  1220. SPL: spl/u-boot-spl.bin FORCE
  1221. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1222. ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
  1223. ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
  1224. u-boot.cnt: u-boot.bin FORCE
  1225. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1226. flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
  1227. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1228. else
  1229. flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
  1230. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1231. endif
  1232. endif
  1233. u-boot.uim: u-boot.bin FORCE
  1234. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1235. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
  1236. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1237. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  1238. u-boot.ubl: u-boot-with-spl.bin FORCE
  1239. $(call if_changed,mkimage)
  1240. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  1241. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  1242. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  1243. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  1244. $(call if_changed,mkimage)
  1245. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1246. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  1247. $(call if_changed,pad_cat)
  1248. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  1249. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  1250. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  1251. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  1252. # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
  1253. # Both images are created using mkimage (crc etc), so that the ROM
  1254. # bootloader can check its integrity. Padding needs to be done to the
  1255. # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
  1256. # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
  1257. # The resulting image containing both U-Boot images is called u-boot.spr
  1258. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  1259. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  1260. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  1261. $(call if_changed,mkimage)
  1262. OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1263. --gap-fill=0xff
  1264. u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
  1265. $(call if_changed,pad_cat)
  1266. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  1267. quiet_cmd_gensplx4 = GENSPLX4 $@
  1268. cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
  1269. --pad-to=$(CONFIG_SPL_PAD_TO) \
  1270. spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
  1271. cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1272. spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
  1273. spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
  1274. $(call if_changed,gensplx4)
  1275. quiet_cmd_socboot = SOCBOOT $@
  1276. cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1277. u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
  1278. $(call if_changed,socboot)
  1279. quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
  1280. cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
  1281. cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1282. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1283. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1284. spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
  1285. { rm -f $@ spl/u-boot-spl.pad; false; }
  1286. u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
  1287. $(call if_changed,gensplpadx4)
  1288. quiet_cmd_socnandboot = SOCNANDBOOT $@
  1289. cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1290. u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
  1291. $(call if_changed,socnandboot)
  1292. endif
  1293. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1294. u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
  1295. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
  1296. $(call if_changed,binman)
  1297. ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
  1298. OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
  1299. u-boot-br.bin: u-boot FORCE
  1300. $(call if_changed,objcopy)
  1301. endif
  1302. endif
  1303. quiet_cmd_ldr = LD $@
  1304. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  1305. $(filter-out FORCE,$^) -o $@
  1306. ifdef CONFIG_X86
  1307. OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
  1308. u-boot-x86-start16.bin: u-boot FORCE
  1309. $(call if_changed,objcopy)
  1310. OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
  1311. u-boot-x86-reset16.bin: u-boot FORCE
  1312. $(call if_changed,objcopy)
  1313. endif # CONFIG_X86
  1314. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  1315. u-boot-app.efi: u-boot FORCE
  1316. $(call if_changed,zobjcopy)
  1317. u-boot.bin.o: u-boot.bin FORCE
  1318. $(call if_changed,efipayload)
  1319. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  1320. $(call if_changed_dep,cpp_lds)
  1321. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  1322. quiet_cmd_u-boot_payload ?= LD $@
  1323. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  1324. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  1325. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  1326. $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
  1327. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  1328. $(call if_changed,u-boot_payload)
  1329. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  1330. u-boot-payload.efi: u-boot-payload FORCE
  1331. $(call if_changed,zobjcopy)
  1332. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  1333. $(call if_changed,cat)
  1334. #Add a target to create boot binary having SPL binary in PBI format
  1335. #concatenated with u-boot binary. It is need by PowerPC SoC having
  1336. #internal SRAM <= 512KB.
  1337. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1338. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  1339. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  1340. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  1341. $(call if_changed,mkimage)
  1342. ifeq ($(ARCH),arm)
  1343. UBOOT_BINLOAD := u-boot.img
  1344. else
  1345. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1346. UBOOT_BINLOAD := u-boot-with-dtb.bin
  1347. else
  1348. UBOOT_BINLOAD := u-boot.bin
  1349. endif
  1350. endif
  1351. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1352. --gap-fill=0xff
  1353. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  1354. $(call if_changed,pad_cat)
  1355. # PPC4xx needs the SPL at the end of the image, since the reset vector
  1356. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  1357. # and need to introduce a new build target with the full blown U-Boot
  1358. # at the start padded up to the start of the SPL image. And then concat
  1359. # the SPL image to the end.
  1360. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  1361. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  1362. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  1363. $(call if_changed,pad_cat)
  1364. quiet_cmd_u-boot-elf ?= LD $@
  1365. cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
  1366. -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
  1367. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  1368. u-boot.elf: u-boot.bin u-boot-elf.lds
  1369. $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
  1370. $(call if_changed,u-boot-elf)
  1371. u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
  1372. $(call if_changed_dep,cpp_lds)
  1373. # MediaTek's ARM-based u-boot needs a header to contains its load address
  1374. # which is parsed by the BootROM.
  1375. # If the SPL build is enabled, the header will be added to the spl binary,
  1376. # and the spl binary and the u-boot.img will be combined into one file.
  1377. # Otherwise the header will be added to the u-boot.bin directly.
  1378. ifeq ($(CONFIG_SPL),y)
  1379. spl/u-boot-spl-mtk.bin: spl/u-boot-spl
  1380. else
  1381. MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
  1382. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1383. -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
  1384. u-boot-mtk.bin: u-boot.bin FORCE
  1385. $(call if_changed,mkimage)
  1386. endif
  1387. quiet_cmd_endian_swap = SWAP $@
  1388. cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
  1389. u-boot-swap.bin: u-boot.bin FORCE
  1390. $(call if_changed,endian_swap)
  1391. ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
  1392. # Rule to link u-boot
  1393. # May be overridden by arch/$(ARCH)/config.mk
  1394. quiet_cmd_u-boot__ ?= LD $@
  1395. cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  1396. -T u-boot.lds $(u-boot-init) \
  1397. --start-group $(u-boot-main) --end-group \
  1398. $(PLATFORM_LIBS) -Map u-boot.map; \
  1399. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1400. quiet_cmd_smap = GEN common/system_map.o
  1401. cmd_smap = \
  1402. smap=`$(call SYSTEM_MAP,u-boot) | \
  1403. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  1404. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  1405. -c $(srctree)/common/system_map.c -o common/system_map.o
  1406. u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
  1407. +$(call if_changed,u-boot__)
  1408. ifeq ($(CONFIG_KALLSYMS),y)
  1409. $(call cmd,smap)
  1410. $(call cmd,u-boot__) common/system_map.o
  1411. endif
  1412. ifeq ($(CONFIG_RISCV),y)
  1413. @tools/prelink-riscv $@ 0
  1414. endif
  1415. quiet_cmd_sym ?= SYM $@
  1416. cmd_sym ?= $(OBJDUMP) -t $< > $@
  1417. u-boot.sym: u-boot FORCE
  1418. $(call if_changed,sym)
  1419. # The actual objects are generated when descending,
  1420. # make sure no implicit rule kicks in
  1421. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  1422. # Handle descending into subdirectories listed in $(u-boot-dirs)
  1423. # Preset locale variables to speed up the build process. Limit locale
  1424. # tweaks to this spot to avoid wrong language settings when running
  1425. # make menuconfig etc.
  1426. # Error messages still appears in the original language
  1427. PHONY += $(u-boot-dirs)
  1428. $(u-boot-dirs): prepare scripts
  1429. $(Q)$(MAKE) $(build)=$@
  1430. tools: prepare
  1431. # The "tools" are needed early
  1432. $(filter-out tools, $(u-boot-dirs)): tools
  1433. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  1434. # is "yes"), so compile examples after U-Boot is compiled.
  1435. examples: $(filter-out examples, $(u-boot-dirs))
  1436. define filechk_uboot.release
  1437. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1438. endef
  1439. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  1440. include/config/uboot.release: include/config/auto.conf FORCE
  1441. $(call filechk,uboot.release)
  1442. # Things we need to do before we recursively start building the kernel
  1443. # or the modules are listed in "prepare".
  1444. # A multi level approach is used. prepareN is processed before prepareN-1.
  1445. # archprepare is used in arch Makefiles and when processed asm symlink,
  1446. # version.h and scripts_basic is processed / created.
  1447. # Listed in dependency order
  1448. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1449. # prepare3 is used to check if we are building in a separate output directory,
  1450. # and if so do:
  1451. # 1) Check that make has not been executed in the kernel src $(srctree)
  1452. prepare3: include/config/uboot.release
  1453. ifneq ($(KBUILD_SRC),)
  1454. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1455. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1456. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1457. echo >&2 " in the '$(srctree)' directory.";\
  1458. /bin/false; \
  1459. fi;
  1460. endif
  1461. # prepare2 creates a makefile if using a separate output directory
  1462. prepare2: prepare3 outputmakefile cfg
  1463. prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \
  1464. include/config/auto.conf
  1465. ifeq ($(wildcard $(LDSCRIPT)),)
  1466. @echo >&2 " Could not find linker script."
  1467. @/bin/false
  1468. endif
  1469. ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
  1470. prepare1: $(defaultenv_h)
  1471. endif
  1472. archprepare: prepare1 scripts_basic
  1473. prepare0: archprepare FORCE
  1474. $(Q)$(MAKE) $(build)=.
  1475. # All the preparing..
  1476. prepare: prepare0
  1477. # Generate some files
  1478. # ---------------------------------------------------------------------------
  1479. # Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
  1480. define filechk_version.h
  1481. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1482. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1483. echo \#define U_BOOT_VERSION_NUM $(VERSION); \
  1484. echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
  1485. sed -e "s/^0*//"); \
  1486. echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
  1487. echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
  1488. endef
  1489. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1490. # The BSD date on the other hand behaves different and would produce errors
  1491. # with the misused '-d' switch. Respect that and search a working date with
  1492. # well known pre- and suffixes for the GNU variant of date.
  1493. define filechk_timestamp.h
  1494. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1495. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1496. DATE=""; \
  1497. for date in gdate date.gnu date; do \
  1498. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1499. done; \
  1500. if test -n "$${DATE}"; then \
  1501. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1502. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1503. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1504. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1505. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1506. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
  1507. else \
  1508. return 42; \
  1509. fi; \
  1510. else \
  1511. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1512. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1513. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1514. LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1515. LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1516. LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
  1517. fi)
  1518. endef
  1519. define filechk_defaultenv.h
  1520. (grep -v '^#' | \
  1521. grep -v '^$$' | \
  1522. tr '\n' '\0' | \
  1523. sed -e 's/\\\x0\s*//g' | \
  1524. xxd -i ; echo ", 0x00" ; )
  1525. endef
  1526. define filechk_dt.h
  1527. (if test -n "$${DEVICE_TREE}"; then \
  1528. echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
  1529. else \
  1530. echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
  1531. fi)
  1532. endef
  1533. $(version_h): include/config/uboot.release FORCE
  1534. $(call filechk,version.h)
  1535. $(timestamp_h): $(srctree)/Makefile FORCE
  1536. $(call filechk,timestamp.h)
  1537. $(dt_h): $(srctree)/Makefile FORCE
  1538. $(call filechk,dt.h)
  1539. $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
  1540. $(call filechk,defaultenv.h)
  1541. # ---------------------------------------------------------------------------
  1542. quiet_cmd_cpp_lds = LDS $@
  1543. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
  1544. -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
  1545. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1546. $(call if_changed_dep,cpp_lds)
  1547. spl/u-boot-spl.bin: spl/u-boot-spl
  1548. @:
  1549. $(SPL_SIZE_CHECK)
  1550. spl/u-boot-spl-dtb.bin: spl/u-boot-spl
  1551. @:
  1552. spl/u-boot-spl-dtb.hex: spl/u-boot-spl
  1553. @:
  1554. spl/u-boot-spl: tools prepare \
  1555. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
  1556. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
  1557. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1558. spl/sunxi-spl.bin: spl/u-boot-spl
  1559. @:
  1560. spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
  1561. @:
  1562. spl/u-boot-spl.sfp: spl/u-boot-spl
  1563. @:
  1564. spl/boot.bin: spl/u-boot-spl
  1565. @:
  1566. tpl/u-boot-tpl.bin: tools prepare \
  1567. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
  1568. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1569. $(TPL_SIZE_CHECK)
  1570. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1571. FIND := find
  1572. FINDFLAGS := -L
  1573. tags ctags:
  1574. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1575. -name '*.[chS]' -print`
  1576. ln -s ctags tags
  1577. etags:
  1578. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1579. -name '*.[chS]' -print`
  1580. cscope:
  1581. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1582. cscope.files
  1583. @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
  1584. grep -xvf - cscope.files > cscope.files.no-symlinks; \
  1585. mv cscope.files.no-symlinks cscope.files
  1586. cscope -b -q -k
  1587. SYSTEM_MAP = \
  1588. $(NM) $1 | \
  1589. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1590. LC_ALL=C sort
  1591. System.map: u-boot
  1592. @$(call SYSTEM_MAP,$<) > $@
  1593. #########################################################################
  1594. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1595. # R_AARCH64_RELATIVE (64-bit).
  1596. checkarmreloc: u-boot
  1597. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1598. grep R_A | sort -u`"; \
  1599. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1600. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1601. echo "$< contains unexpected relocations: $$RELOC"; \
  1602. false; \
  1603. fi
  1604. tools/version.h: include/version.h
  1605. $(Q)mkdir -p $(dir $@)
  1606. $(call if_changed,copy)
  1607. envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1608. $(Q)$(MAKE) $(build)=tools/env
  1609. tools-only: export TOOLS_ONLY=y
  1610. tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1611. $(Q)$(MAKE) $(build)=tools
  1612. tools-all: export HOST_TOOLS_ALL=y
  1613. tools-all: envtools tools ;
  1614. cross_tools: export CROSS_BUILD_TOOLS=y
  1615. cross_tools: tools ;
  1616. .PHONY : CHANGELOG
  1617. CHANGELOG:
  1618. git log --no-merges U-Boot-1_1_5.. | \
  1619. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1620. #########################################################################
  1621. ###
  1622. # Cleaning is done on three levels.
  1623. # make clean Delete most generated files
  1624. # Leave enough to build external modules
  1625. # make mrproper Delete the current configuration, and all generated files
  1626. # make distclean Remove editor backup files, patch leftover files and the like
  1627. # Directories & files removed with 'make clean'
  1628. CLEAN_DIRS += $(MODVERDIR) \
  1629. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1630. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1631. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
  1632. boot* u-boot* MLO* SPL System.map fit-dtb.blob* \
  1633. u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
  1634. lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
  1635. idbloader.img flash.bin flash.log defconfig
  1636. # Directories & files removed with 'make mrproper'
  1637. MRPROPER_DIRS += include/config include/generated spl tpl \
  1638. .tmp_objdiff doc/output
  1639. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1640. ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
  1641. drivers/video/fonts/*.S
  1642. # clean - Delete most, but leave enough to build external modules
  1643. #
  1644. clean: rm-dirs := $(CLEAN_DIRS)
  1645. clean: rm-files := $(CLEAN_FILES)
  1646. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1647. clean-dirs := $(addprefix _clean_, $(clean-dirs))
  1648. PHONY += $(clean-dirs) clean archclean
  1649. $(clean-dirs):
  1650. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1651. clean: $(clean-dirs)
  1652. $(call cmd,rmdirs)
  1653. $(call cmd,rmfiles)
  1654. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1655. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1656. -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
  1657. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1658. -o -name '*.lex.c' -o -name '*.tab.[ch]' \
  1659. -o -name '*.asn1.[ch]' \
  1660. -o -name '*.symtypes' -o -name 'modules.order' \
  1661. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1662. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1663. -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
  1664. -type f -print | xargs rm -f
  1665. # mrproper - Delete all generated files, including .config
  1666. #
  1667. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1668. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1669. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1670. PHONY += $(mrproper-dirs) mrproper archmrproper
  1671. $(mrproper-dirs):
  1672. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1673. mrproper: clean $(mrproper-dirs)
  1674. $(call cmd,rmdirs)
  1675. $(call cmd,rmfiles)
  1676. @rm -f arch/*/include/asm/arch
  1677. # distclean
  1678. #
  1679. PHONY += distclean
  1680. distclean: mrproper
  1681. @find $(srctree) $(RCS_FIND_IGNORE) \
  1682. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1683. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1684. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1685. -o -name '*.pyc' \) \
  1686. -type f -print | xargs rm -f
  1687. @rm -f boards.cfg CHANGELOG
  1688. backup:
  1689. F=`basename $(srctree)` ; cd .. ; \
  1690. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1691. help:
  1692. @echo 'Cleaning targets:'
  1693. @echo ' clean - Remove most generated files but keep the config'
  1694. @echo ' mrproper - Remove all generated files + config + various backup files'
  1695. @echo ' distclean - mrproper + remove editor backup and patch files'
  1696. @echo ''
  1697. @echo 'Configuration targets:'
  1698. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1699. @echo ''
  1700. @echo 'Test targets:'
  1701. @echo ''
  1702. @echo ' check - Run all automated tests that use sandbox'
  1703. @echo ' qcheck - Run quick automated tests that use sandbox'
  1704. @echo ' tcheck - Run quick automated tests on tools'
  1705. @echo ''
  1706. @echo 'Other generic targets:'
  1707. @echo ' all - Build all necessary images depending on configuration'
  1708. @echo ' tests - Build U-Boot for sandbox and run tests'
  1709. @echo '* u-boot - Build the bare u-boot'
  1710. @echo ' dir/ - Build all files in dir and below'
  1711. @echo ' dir/file.[oisS] - Build specified target only'
  1712. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1713. @echo ' (requires a recent binutils and recent build (System.map))'
  1714. @echo ' tags/ctags - Generate ctags file for editors'
  1715. @echo ' etags - Generate etags file for editors'
  1716. @echo ' cscope - Generate cscope index'
  1717. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1718. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1719. @echo " cfg - Don't build, just create the .cfg files"
  1720. @echo " envtools - Build only the target-side environment tools"
  1721. @echo ''
  1722. @echo 'Static analysers'
  1723. @echo ' checkstack - Generate a list of stack hogs'
  1724. @echo ' coccicheck - Execute static code analysis with Coccinelle'
  1725. @echo ''
  1726. @echo 'Documentation targets:'
  1727. @$(MAKE) -f $(srctree)/doc/Makefile dochelp
  1728. @echo ''
  1729. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1730. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1731. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1732. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1733. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1734. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1735. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1736. @echo ' 1: warnings which may be relevant and do not occur too often'
  1737. @echo ' 2: warnings which occur quite often but may still be relevant'
  1738. @echo ' 3: more obscure warnings, can most likely be ignored'
  1739. @echo ' Multiple levels can be combined with W=12 or W=123'
  1740. @echo ''
  1741. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1742. @echo 'For further info see the ./README file'
  1743. tests check:
  1744. $(srctree)/test/run
  1745. qcheck:
  1746. $(srctree)/test/run quick
  1747. tcheck:
  1748. $(srctree)/test/run tools
  1749. # Documentation targets
  1750. # ---------------------------------------------------------------------------
  1751. DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
  1752. linkcheckdocs dochelp refcheckdocs
  1753. PHONY += $(DOC_TARGETS)
  1754. $(DOC_TARGETS): scripts_basic FORCE
  1755. $(Q)$(MAKE) $(build)=doc $@
  1756. endif #ifeq ($(config-targets),1)
  1757. endif #ifeq ($(mixed-targets),1)
  1758. PHONY += checkstack ubootrelease ubootversion
  1759. checkstack:
  1760. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1761. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1762. ubootrelease:
  1763. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1764. ubootversion:
  1765. @echo $(UBOOTVERSION)
  1766. # Single targets
  1767. # ---------------------------------------------------------------------------
  1768. # Single targets are compatible with:
  1769. # - build with mixed source and output
  1770. # - build with separate output dir 'make O=...'
  1771. # - external modules
  1772. #
  1773. # target-dir => where to store outputfile
  1774. # build-dir => directory in kernel source tree to use
  1775. ifeq ($(KBUILD_EXTMOD),)
  1776. build-dir = $(patsubst %/,%,$(dir $@))
  1777. target-dir = $(dir $@)
  1778. else
  1779. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1780. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1781. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1782. endif
  1783. %.s: %.c prepare scripts FORCE
  1784. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1785. %.i: %.c prepare scripts FORCE
  1786. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1787. %.o: %.c prepare scripts FORCE
  1788. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1789. %.lst: %.c prepare scripts FORCE
  1790. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1791. %.s: %.S prepare scripts FORCE
  1792. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1793. %.o: %.S prepare scripts FORCE
  1794. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1795. %.symtypes: %.c prepare scripts FORCE
  1796. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1797. # Modules
  1798. /: prepare scripts FORCE
  1799. $(cmd_crmodverdir)
  1800. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1801. $(build)=$(build-dir)
  1802. %/: prepare scripts FORCE
  1803. $(cmd_crmodverdir)
  1804. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1805. $(build)=$(build-dir)
  1806. %.ko: prepare scripts FORCE
  1807. $(cmd_crmodverdir)
  1808. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1809. $(build)=$(build-dir) $(@:.ko=.o)
  1810. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1811. quiet_cmd_genenv = GENENV $@
  1812. cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
  1813. sed --in-place -e 's/\x00/\x0A/g' $@
  1814. u-boot-initial-env: u-boot.bin
  1815. $(call if_changed,genenv)
  1816. # Consistency checks
  1817. # ---------------------------------------------------------------------------
  1818. PHONY += coccicheck
  1819. coccicheck:
  1820. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
  1821. # FIXME Should go into a make.lib or something
  1822. # ===========================================================================
  1823. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1824. cmd_rmdirs = rm -rf $(rm-dirs)
  1825. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1826. cmd_rmfiles = rm -f $(rm-files)
  1827. # read all saved command lines
  1828. cmd_files := $(wildcard .*.cmd $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
  1829. ifneq ($(cmd_files),)
  1830. $(cmd_files): ; # Do not try to update included dependency files
  1831. include $(cmd_files)
  1832. endif
  1833. endif # skip-makefile
  1834. PHONY += FORCE
  1835. FORCE:
  1836. # Declare the contents of the PHONY variable as phony. We keep that
  1837. # information in a variable so we can use it in if_changed and friends.
  1838. .PHONY: $(PHONY)