Makefile 76 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352
  1. # SPDX-License-Identifier: GPL-2.0+
  2. VERSION = 2021
  3. PATCHLEVEL = 10
  4. SUBLEVEL =
  5. EXTRAVERSION =
  6. NAME =
  7. # *DOCUMENTATION*
  8. # To see a list of typical targets execute "make help"
  9. # More info can be located in ./README
  10. # Comments in this file are targeted only to the developer, do not
  11. # expect to learn how to build the kernel reading this file.
  12. # Do not use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour)
  14. MAKEFLAGS += -rR
  15. # Determine target architecture for the sandbox
  16. include include/host_arch.h
  17. ifeq ("", "$(CROSS_COMPILE)")
  18. MK_ARCH="${shell uname -m}"
  19. else
  20. MK_ARCH="${shell echo $(CROSS_COMPILE) | sed -n 's/^\s*\([^\/]*\/\)*\([^-]*\)-\S*/\2/p'}"
  21. endif
  22. unexport HOST_ARCH
  23. ifeq ("x86_64", $(MK_ARCH))
  24. export HOST_ARCH=$(HOST_ARCH_X86_64)
  25. else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
  26. export HOST_ARCH=$(HOST_ARCH_X86)
  27. else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
  28. export HOST_ARCH=$(HOST_ARCH_AARCH64)
  29. else ifneq (,$(findstring $(MK_ARCH), "arm" "armv7" "armv7l"))
  30. export HOST_ARCH=$(HOST_ARCH_ARM)
  31. else ifeq ("riscv32", $(MK_ARCH))
  32. export HOST_ARCH=$(HOST_ARCH_RISCV32)
  33. else ifeq ("riscv64", $(MK_ARCH))
  34. export HOST_ARCH=$(HOST_ARCH_RISCV64)
  35. endif
  36. undefine MK_ARCH
  37. # Avoid funny character set dependencies
  38. unexport LC_ALL
  39. LC_COLLATE=C
  40. LC_NUMERIC=C
  41. export LC_COLLATE LC_NUMERIC
  42. # Avoid interference with shell env settings
  43. unexport GREP_OPTIONS
  44. # We are using a recursive build, so we need to do a little thinking
  45. # to get the ordering right.
  46. #
  47. # Most importantly: sub-Makefiles should only ever modify files in
  48. # their own directory. If in some directory we have a dependency on
  49. # a file in another dir (which doesn't happen often, but it's often
  50. # unavoidable when linking the built-in.o targets which finally
  51. # turn into vmlinux), we will call a sub make in that other dir, and
  52. # after that we are sure that everything which is in that other dir
  53. # is now up to date.
  54. #
  55. # The only cases where we need to modify files which have global
  56. # effects are thus separated out and done before the recursive
  57. # descending is started. They are now explicitly listed as the
  58. # prepare rule.
  59. # Beautify output
  60. # ---------------------------------------------------------------------------
  61. #
  62. # Normally, we echo the whole command before executing it. By making
  63. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  64. # $(quiet) to choose other forms of output instead, e.g.
  65. #
  66. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  67. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  68. #
  69. # If $(quiet) is empty, the whole command will be printed.
  70. # If it is set to "quiet_", only the short version will be printed.
  71. # If it is set to "silent_", nothing will be printed at all, since
  72. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  73. #
  74. # A simple variant is to prefix commands with $(Q) - that's useful
  75. # for commands that shall be hidden in non-verbose mode.
  76. #
  77. # $(Q)ln $@ :<
  78. #
  79. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  80. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  81. #
  82. # To put more focus on warnings, be less verbose as default
  83. # Use 'make V=1' to see the full commands
  84. ifeq ("$(origin V)", "command line")
  85. KBUILD_VERBOSE = $(V)
  86. endif
  87. ifndef KBUILD_VERBOSE
  88. KBUILD_VERBOSE = 0
  89. endif
  90. ifeq ($(KBUILD_VERBOSE),1)
  91. quiet =
  92. Q =
  93. else
  94. quiet=quiet_
  95. Q = @
  96. endif
  97. # If the user is running make -s (silent mode), suppress echoing of
  98. # commands
  99. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  100. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  101. quiet=silent_
  102. endif
  103. else # make-3.8x
  104. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  105. quiet=silent_
  106. endif
  107. endif
  108. export quiet Q KBUILD_VERBOSE
  109. # kbuild supports saving output files in a separate directory.
  110. # To locate output files in a separate directory two syntaxes are supported.
  111. # In both cases the working directory must be the root of the kernel src.
  112. # 1) O=
  113. # Use "make O=dir/to/store/output/files/"
  114. #
  115. # 2) Set KBUILD_OUTPUT
  116. # Set the environment variable KBUILD_OUTPUT to point to the directory
  117. # where the output files shall be placed.
  118. # export KBUILD_OUTPUT=dir/to/store/output/files/
  119. # make
  120. #
  121. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  122. # variable.
  123. # KBUILD_SRC is set on invocation of make in OBJ directory
  124. # KBUILD_SRC is not intended to be used by the regular user (for now)
  125. ifeq ($(KBUILD_SRC),)
  126. # OK, Make called in directory where kernel src resides
  127. # Do we want to locate output files in a separate directory?
  128. ifeq ("$(origin O)", "command line")
  129. KBUILD_OUTPUT := $(O)
  130. endif
  131. # That's our default target when none is given on the command line
  132. PHONY := _all
  133. _all:
  134. # Cancel implicit rules on top Makefile
  135. $(CURDIR)/Makefile Makefile: ;
  136. ifneq ($(KBUILD_OUTPUT),)
  137. # Invoke a second make in the output directory, passing relevant variables
  138. # check that the output directory actually exists
  139. saved-output := $(KBUILD_OUTPUT)
  140. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  141. && /bin/pwd)
  142. $(if $(KBUILD_OUTPUT),, \
  143. $(error failed to create output directory "$(saved-output)"))
  144. # Look for make include files relative to root of kernel src
  145. #
  146. # This does not become effective immediately because MAKEFLAGS is re-parsed
  147. # once after the Makefile is read. It is OK since we are going to invoke
  148. # 'sub-make' below.
  149. MAKEFLAGS += --include-dir=$(CURDIR)
  150. PHONY += $(MAKECMDGOALS) sub-make
  151. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  152. @:
  153. sub-make: FORCE
  154. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  155. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  156. # Leave processing to above invocation of make
  157. skip-makefile := 1
  158. endif # ifneq ($(KBUILD_OUTPUT),)
  159. endif # ifeq ($(KBUILD_SRC),)
  160. # We process the rest of the Makefile if this is the final invocation of make
  161. ifeq ($(skip-makefile),)
  162. # Do not print "Entering directory ...",
  163. # but we want to display it when entering to the output directory
  164. # so that IDEs/editors are able to understand relative filenames.
  165. MAKEFLAGS += --no-print-directory
  166. # Call a source code checker (by default, "sparse") as part of the
  167. # C compilation.
  168. #
  169. # Use 'make C=1' to enable checking of only re-compiled files.
  170. # Use 'make C=2' to enable checking of *all* source files, regardless
  171. # of whether they are re-compiled or not.
  172. #
  173. # See the file "doc/sparse.txt" for more details, including
  174. # where to get the "sparse" utility.
  175. ifeq ("$(origin C)", "command line")
  176. KBUILD_CHECKSRC = $(C)
  177. endif
  178. ifndef KBUILD_CHECKSRC
  179. KBUILD_CHECKSRC = 0
  180. endif
  181. # Use make M=dir to specify directory of external module to build
  182. # Old syntax make ... SUBDIRS=$PWD is still supported
  183. # Setting the environment variable KBUILD_EXTMOD take precedence
  184. ifdef SUBDIRS
  185. KBUILD_EXTMOD ?= $(SUBDIRS)
  186. endif
  187. ifeq ("$(origin M)", "command line")
  188. KBUILD_EXTMOD := $(M)
  189. endif
  190. # If building an external module we do not care about the all: rule
  191. # but instead _all depend on modules
  192. PHONY += all
  193. ifeq ($(KBUILD_EXTMOD),)
  194. _all: all
  195. else
  196. _all: modules
  197. endif
  198. ifeq ($(KBUILD_SRC),)
  199. # building in the source tree
  200. srctree := .
  201. else
  202. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  203. # building in a subdirectory of the source tree
  204. srctree := ..
  205. else
  206. srctree := $(KBUILD_SRC)
  207. endif
  208. endif
  209. objtree := .
  210. src := $(srctree)
  211. obj := $(objtree)
  212. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  213. export srctree objtree VPATH
  214. # Make sure CDPATH settings don't interfere
  215. unexport CDPATH
  216. #########################################################################
  217. HOSTARCH := $(shell uname -m | \
  218. sed -e s/i.86/x86/ \
  219. -e s/sun4u/sparc64/ \
  220. -e s/arm.*/arm/ \
  221. -e s/sa110/arm/ \
  222. -e s/ppc64/powerpc/ \
  223. -e s/ppc/powerpc/ \
  224. -e s/macppc/powerpc/\
  225. -e s/sh.*/sh/)
  226. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  227. sed -e 's/\(cygwin\).*/cygwin/')
  228. export HOSTARCH HOSTOS
  229. #########################################################################
  230. # set default to nothing for native builds
  231. ifeq ($(HOSTARCH),$(ARCH))
  232. CROSS_COMPILE ?=
  233. endif
  234. KCONFIG_CONFIG ?= .config
  235. export KCONFIG_CONFIG
  236. # SHELL used by kbuild
  237. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  238. else if [ -x /bin/bash ]; then echo /bin/bash; \
  239. else echo sh; fi ; fi)
  240. HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
  241. HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
  242. HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
  243. HOSTCC = cc
  244. HOSTCXX = c++
  245. KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
  246. $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
  247. KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
  248. KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
  249. KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
  250. # With the move to GCC 6, we have implicitly upgraded our language
  251. # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
  252. # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
  253. # have older compilers as their default, so we make it explicit for
  254. # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
  255. CSTD_FLAG := -std=gnu11
  256. ifeq ($(HOSTOS),linux)
  257. KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
  258. endif
  259. ifeq ($(HOSTOS),cygwin)
  260. KBUILD_HOSTCFLAGS += -ansi
  261. endif
  262. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  263. # generates numerous errors and warnings. We want to bypass it
  264. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  265. # option to the compiler. Note that the -traditional-cpp flag
  266. # DOES NOT have the same semantics as GNU C's flag, all it does
  267. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  268. #
  269. # Apple's linker is similar, thanks to the new 2 stage linking
  270. # multiple symbol definitions are treated as errors, hence the
  271. # -multiply_defined suppress option to turn off this error.
  272. #
  273. ifeq ($(HOSTOS),darwin)
  274. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  275. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  276. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  277. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  278. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  279. os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
  280. $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  281. # Snow Leopards build environment has no longer restrictions as described above
  282. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  283. KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  284. KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  285. # macOS Mojave (10.14.X)
  286. # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
  287. KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
  288. endif
  289. # Decide whether to build built-in, modular, or both.
  290. # Normally, just do built-in.
  291. KBUILD_MODULES :=
  292. KBUILD_BUILTIN := 1
  293. # If we have only "make modules", don't compile built-in objects.
  294. # When we're building modules with modversions, we need to consider
  295. # the built-in objects during the descend as well, in order to
  296. # make sure the checksums are up to date before we record them.
  297. ifeq ($(MAKECMDGOALS),modules)
  298. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  299. endif
  300. # If we have "make <whatever> modules", compile modules
  301. # in addition to whatever we do anyway.
  302. # Just "make" or "make all" shall build modules as well
  303. # U-Boot does not need modules
  304. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  305. # KBUILD_MODULES := 1
  306. #endif
  307. #ifeq ($(MAKECMDGOALS),)
  308. # KBUILD_MODULES := 1
  309. #endif
  310. # Check ths size of a binary:
  311. # Args:
  312. # $1: File to check
  313. # #2: Size limit in bytes (decimal or 0xhex)
  314. define size_check
  315. actual=$$( wc -c $1 | awk '{print $$1}'); \
  316. limit=$$( printf "%d" $2 ); \
  317. if test $$actual -gt $$limit; then \
  318. echo "$1 exceeds file size limit:" >&2; \
  319. echo " limit: $$(printf %#x $$limit) bytes" >&2; \
  320. echo " actual: $$(printf %#x $$actual) bytes" >&2; \
  321. echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
  322. exit 1; \
  323. fi
  324. endef
  325. export size_check
  326. export KBUILD_MODULES KBUILD_BUILTIN
  327. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  328. # We need some generic definitions (do not try to remake the file).
  329. scripts/Kbuild.include: ;
  330. include scripts/Kbuild.include
  331. # Make variables (CC, etc...)
  332. AS = $(CROSS_COMPILE)as
  333. # Always use GNU ld
  334. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  335. LD = $(CROSS_COMPILE)ld.bfd
  336. else
  337. LD = $(CROSS_COMPILE)ld
  338. endif
  339. CC = $(CROSS_COMPILE)gcc
  340. CPP = $(CC) -E
  341. AR = $(CROSS_COMPILE)ar
  342. NM = $(CROSS_COMPILE)nm
  343. LDR = $(CROSS_COMPILE)ldr
  344. STRIP = $(CROSS_COMPILE)strip
  345. OBJCOPY = $(CROSS_COMPILE)objcopy
  346. OBJDUMP = $(CROSS_COMPILE)objdump
  347. LEX = flex
  348. YACC = bison
  349. AWK = awk
  350. PERL = perl
  351. PYTHON ?= python
  352. PYTHON2 = python2
  353. PYTHON3 ?= python3
  354. # The devicetree compiler and pylibfdt are automatically built unless DTC is
  355. # provided. If DTC is provided, it is assumed the pylibfdt is available too.
  356. DTC_INTREE := $(objtree)/scripts/dtc/dtc
  357. DTC ?= $(DTC_INTREE)
  358. DTC_MIN_VERSION := 010406
  359. CHECK = sparse
  360. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  361. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  362. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  363. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  364. -Wno-format-security \
  365. -fno-builtin -ffreestanding $(CSTD_FLAG)
  366. KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
  367. KBUILD_AFLAGS := -D__ASSEMBLY__
  368. KBUILD_LDFLAGS :=
  369. ifeq ($(cc-name),clang)
  370. ifneq ($(CROSS_COMPILE),)
  371. CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
  372. GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
  373. CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
  374. GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
  375. endif
  376. ifneq ($(GCC_TOOLCHAIN),)
  377. CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
  378. endif
  379. KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  380. KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  381. KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
  382. KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
  383. endif
  384. # Don't generate position independent code
  385. KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
  386. KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
  387. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  388. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  389. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  390. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  391. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  392. export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
  393. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
  394. export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
  395. export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
  396. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
  397. export KBUILD_CFLAGS KBUILD_AFLAGS
  398. export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
  399. # When compiling out-of-tree modules, put MODVERDIR in the module
  400. # tree rather than in the kernel tree. The kernel tree might
  401. # even be read-only.
  402. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  403. # Files to ignore in find ... statements
  404. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  405. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  406. -prune -o
  407. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  408. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  409. # ===========================================================================
  410. # Rules shared between *config targets and build targets
  411. # Basic helpers built in scripts/
  412. PHONY += scripts_basic
  413. scripts_basic:
  414. $(Q)$(MAKE) $(build)=scripts/basic
  415. $(Q)rm -f .tmp_quiet_recordmcount
  416. # To avoid any implicit rule to kick in, define an empty command.
  417. scripts/basic/%: scripts_basic ;
  418. PHONY += outputmakefile
  419. # outputmakefile generates a Makefile in the output directory, if using a
  420. # separate output directory. This allows convenient use of make in the
  421. # output directory.
  422. outputmakefile:
  423. ifneq ($(KBUILD_SRC),)
  424. $(Q)ln -fsn $(srctree) source
  425. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
  426. endif
  427. # To make sure we do not include .config for any of the *config targets
  428. # catch them early, and hand them over to scripts/kconfig/Makefile
  429. # It is allowed to specify more targets when calling make, including
  430. # mixing *config targets and build targets.
  431. # For example 'make oldconfig all'.
  432. # Detect when mixed targets is specified, and make a second invocation
  433. # of make so .config is not included in this case either (for *config).
  434. version_h := include/generated/version_autogenerated.h
  435. timestamp_h := include/generated/timestamp_autogenerated.h
  436. defaultenv_h := include/generated/defaultenv_autogenerated.h
  437. dt_h := include/generated/dt.h
  438. no-dot-config-targets := clean clobber mrproper distclean \
  439. help %docs check% coccicheck \
  440. ubootversion backup tests check qcheck tcheck
  441. config-targets := 0
  442. mixed-targets := 0
  443. dot-config := 1
  444. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  445. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  446. dot-config := 0
  447. endif
  448. endif
  449. ifeq ($(KBUILD_EXTMOD),)
  450. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  451. config-targets := 1
  452. ifneq ($(words $(MAKECMDGOALS)),1)
  453. mixed-targets := 1
  454. endif
  455. endif
  456. endif
  457. ifeq ($(mixed-targets),1)
  458. # ===========================================================================
  459. # We're called with mixed targets (*config and build targets).
  460. # Handle them one by one.
  461. PHONY += $(MAKECMDGOALS) __build_one_by_one
  462. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  463. @:
  464. __build_one_by_one:
  465. $(Q)set -e; \
  466. for i in $(MAKECMDGOALS); do \
  467. $(MAKE) -f $(srctree)/Makefile $$i; \
  468. done
  469. else
  470. ifeq ($(config-targets),1)
  471. # ===========================================================================
  472. # *config targets only - make sure prerequisites are updated, and descend
  473. # in scripts/kconfig to make the *config target
  474. KBUILD_DEFCONFIG := sandbox_defconfig
  475. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  476. config: scripts_basic outputmakefile FORCE
  477. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  478. %config: scripts_basic outputmakefile FORCE
  479. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  480. else
  481. # ===========================================================================
  482. # Build targets only - this includes vmlinux, arch specific targets, clean
  483. # targets and others. In general all targets except *config targets.
  484. # Additional helpers built in scripts/
  485. # Carefully list dependencies so we do not try to build scripts twice
  486. # in parallel
  487. PHONY += scripts
  488. scripts: scripts_basic scripts_dtc include/config/auto.conf
  489. $(Q)$(MAKE) $(build)=$(@)
  490. ifeq ($(dot-config),1)
  491. # Read in config
  492. -include include/config/auto.conf
  493. # Read in dependencies to all Kconfig* files, make sure to run
  494. # oldconfig if changes are detected.
  495. -include include/config/auto.conf.cmd
  496. # To avoid any implicit rule to kick in, define an empty command
  497. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  498. # If .config is newer than include/config/auto.conf, someone tinkered
  499. # with it and forgot to run make oldconfig.
  500. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  501. # we execute the config step to be sure to catch updated Kconfig files
  502. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  503. $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
  504. @# If the following part fails, include/config/auto.conf should be
  505. @# deleted so "make silentoldconfig" will be re-run on the next build.
  506. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  507. { rm -f include/config/auto.conf; false; }
  508. @# include/config.h has been updated after "make silentoldconfig".
  509. @# We need to touch include/config/auto.conf so it gets newer
  510. @# than include/config.h.
  511. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  512. $(Q)touch include/config/auto.conf
  513. u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
  514. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
  515. -include include/autoconf.mk
  516. -include include/autoconf.mk.dep
  517. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  518. # is up-to-date. When we switch to a different board configuration, old CONFIG
  519. # macros are still remaining in include/config/auto.conf. Without the following
  520. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  521. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  522. ifneq ($(wildcard include/config/auto.conf),)
  523. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  524. include/config/auto.conf)
  525. ifeq ($(autoconf_is_old),)
  526. include config.mk
  527. include arch/$(ARCH)/Makefile
  528. endif
  529. endif
  530. endif
  531. # These are set by the arch-specific config.mk. Make sure they are exported
  532. # so they can be used when building an EFI application.
  533. export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
  534. export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
  535. export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
  536. export CFLAGS_EFI # Compiler flags to add when building EFI app
  537. export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
  538. export EFI_TARGET # binutils target if EFI is natively supported
  539. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  540. # that (or fail if absent). Otherwise, search for a linker script in a
  541. # standard location.
  542. ifndef LDSCRIPT
  543. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  544. ifdef CONFIG_SYS_LDSCRIPT
  545. # need to strip off double quotes
  546. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  547. endif
  548. endif
  549. # If there is no specified link script, we look in a number of places for it
  550. ifndef LDSCRIPT
  551. ifeq ($(wildcard $(LDSCRIPT)),)
  552. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  553. endif
  554. ifeq ($(wildcard $(LDSCRIPT)),)
  555. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  556. endif
  557. ifeq ($(wildcard $(LDSCRIPT)),)
  558. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  559. endif
  560. endif
  561. else
  562. # Dummy target needed, because used as prerequisite
  563. include/config/auto.conf: ;
  564. endif # $(dot-config)
  565. #
  566. # Xtensa linker script cannot be preprocessed with -ansi because of
  567. # preprocessor operations on strings that don't make C identifiers.
  568. #
  569. ifeq ($(CONFIG_XTENSA),)
  570. LDPPFLAGS += -ansi
  571. endif
  572. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  573. KBUILD_CFLAGS += -Os
  574. else
  575. KBUILD_CFLAGS += -O2
  576. endif
  577. LTO_CFLAGS :=
  578. LTO_FINAL_LDFLAGS :=
  579. export LTO_CFLAGS LTO_FINAL_LDFLAGS
  580. ifdef CONFIG_LTO
  581. ifeq ($(cc-name),clang)
  582. LTO_CFLAGS += -flto
  583. LTO_FINAL_LDFLAGS += -flto
  584. AR = $(shell $(CC) -print-prog-name=llvm-ar)
  585. NM = $(shell $(CC) -print-prog-name=llvm-nm)
  586. else
  587. NPROC := $(shell nproc 2>/dev/null || echo 1)
  588. LTO_CFLAGS += -flto=$(NPROC)
  589. LTO_FINAL_LDFLAGS += -fuse-linker-plugin -flto=$(NPROC)
  590. # use plugin aware tools
  591. AR = $(CROSS_COMPILE)gcc-ar
  592. NM = $(CROSS_COMPILE)gcc-nm
  593. endif
  594. CFLAGS_NON_EFI += $(LTO_CFLAGS)
  595. KBUILD_CFLAGS += $(LTO_CFLAGS)
  596. endif
  597. ifeq ($(CONFIG_STACKPROTECTOR),y)
  598. KBUILD_CFLAGS += $(call cc-option,-fstack-protector-strong)
  599. CFLAGS_EFI += $(call cc-option,-fno-stack-protector)
  600. else
  601. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  602. endif
  603. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  604. # disable pointer signed / unsigned warnings in gcc 4.0
  605. KBUILD_CFLAGS += -Wno-pointer-sign
  606. # disable stringop warnings in gcc 8+
  607. KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
  608. KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
  609. KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
  610. KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
  611. # Enabled with W=2, disabled by default as noisy
  612. KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
  613. # change __FILE__ to the relative path from the srctree
  614. KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
  615. KBUILD_CFLAGS += -g
  616. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  617. # option to the assembler.
  618. KBUILD_AFLAGS += -g
  619. # Report stack usage if supported
  620. # ARC tools based on GCC 7.1 has an issue with stack usage
  621. # with naked functions, see commit message for more details
  622. ifndef CONFIG_ARC
  623. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  624. KBUILD_CFLAGS += -fstack-usage
  625. endif
  626. endif
  627. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  628. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  629. ifdef CONFIG_CC_IS_CLANG
  630. KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
  631. KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
  632. KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
  633. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  634. # Quiet clang warning: comparison of unsigned expression < 0 is always false
  635. KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
  636. # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
  637. # source of a reference will be _MergedGlobals and not on of the whitelisted names.
  638. # See modpost pattern 2
  639. KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
  640. KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
  641. endif
  642. # These warnings generated too much noise in a regular build.
  643. # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
  644. KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
  645. # Prohibit date/time macros, which would make the build non-deterministic
  646. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  647. include scripts/Makefile.extrawarn
  648. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  649. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  650. KBUILD_AFLAGS += $(KAFLAGS)
  651. KBUILD_CFLAGS += $(KCFLAGS)
  652. KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
  653. # Use UBOOTINCLUDE when you must reference the include/ directory.
  654. # Needed to be compatible with the O= option
  655. UBOOTINCLUDE := \
  656. -Iinclude \
  657. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  658. $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
  659. $(if $(CONFIG_HAS_THUMB2), \
  660. $(if $(CONFIG_CPU_V7M), \
  661. -I$(srctree)/arch/arm/thumb1/include), \
  662. -I$(srctree)/arch/arm/thumb1/include)) \
  663. -I$(srctree)/arch/$(ARCH)/include \
  664. -include $(srctree)/include/linux/kconfig.h
  665. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  666. # FIX ME
  667. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  668. $(NOSTDINC_FLAGS)
  669. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  670. #########################################################################
  671. # U-Boot objects....order is important (i.e. start must be first)
  672. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  673. libs-$(CONFIG_API) += api/
  674. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  675. libs-y += cmd/
  676. libs-y += common/
  677. libs-$(CONFIG_OF_EMBED) += dts/
  678. libs-y += env/
  679. libs-y += lib/
  680. libs-y += fs/
  681. libs-y += net/
  682. libs-y += disk/
  683. libs-y += drivers/
  684. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  685. libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
  686. libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
  687. libs-y += drivers/usb/cdns3/
  688. libs-y += drivers/usb/dwc3/
  689. libs-y += drivers/usb/common/
  690. libs-y += drivers/usb/emul/
  691. libs-y += drivers/usb/eth/
  692. libs-$(CONFIG_USB_DEVICE) += drivers/usb/gadget/
  693. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
  694. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
  695. libs-y += drivers/usb/host/
  696. libs-y += drivers/usb/mtu3/
  697. libs-y += drivers/usb/musb/
  698. libs-y += drivers/usb/musb-new/
  699. libs-y += drivers/usb/phy/
  700. libs-y += drivers/usb/ulpi/
  701. ifdef CONFIG_POST
  702. libs-y += post/
  703. endif
  704. libs-$(CONFIG_UNIT_TEST) += test/
  705. libs-$(CONFIG_UT_ENV) += test/env/
  706. libs-$(CONFIG_UT_OPTEE) += test/optee/
  707. libs-$(CONFIG_UT_OVERLAY) += test/overlay/
  708. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  709. libs-y := $(sort $(libs-y))
  710. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  711. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  712. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  713. u-boot-init := $(head-y)
  714. u-boot-main := $(libs-y)
  715. # Add GCC lib
  716. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  717. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  718. else
  719. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  720. endif
  721. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  722. ifdef CONFIG_CC_COVERAGE
  723. KBUILD_CFLAGS += --coverage
  724. PLATFORM_LIBGCC += -lgcov
  725. endif
  726. export PLATFORM_LIBS
  727. export PLATFORM_LIBGCC
  728. # Special flags for CPP when processing the linker script.
  729. # Pass the version down so we can handle backwards compatibility
  730. # on the fly.
  731. LDPPFLAGS += \
  732. -include $(srctree)/include/u-boot/u-boot.lds.h \
  733. -DCPUDIR=$(CPUDIR) \
  734. $(shell $(LD) --version | \
  735. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  736. #########################################################################
  737. #########################################################################
  738. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  739. BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
  740. else
  741. BOARD_SIZE_CHECK =
  742. endif
  743. ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
  744. SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
  745. else
  746. SPL_SIZE_CHECK =
  747. endif
  748. ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
  749. TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
  750. else
  751. TPL_SIZE_CHECK =
  752. endif
  753. # Statically apply RELA-style relocations (currently arm64 only)
  754. # This is useful for arm64 where static relocation needs to be performed on
  755. # the raw binary, but certain simulators only accept an ELF file (but don't
  756. # do the relocation).
  757. ifneq ($(CONFIG_STATIC_RELA),)
  758. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  759. quiet_cmd_static_rela = RELOC $@
  760. cmd_static_rela = \
  761. start=$$($(NM) $(2) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  762. end=$$($(NM) $(2) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  763. tools/relocate-rela $(3) $(4) $$start $$end
  764. else
  765. quiet_cmd_static_rela =
  766. cmd_static_rela =
  767. endif
  768. # Always append INPUTS so that arch config.mk's can add custom ones
  769. INPUTS-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
  770. INPUTS-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  771. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  772. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  773. else
  774. ifneq ($(CONFIG_NXP_ESBC), y)
  775. # For Secure Boot The Image needs to be signed and Header must also
  776. # be included. So The image has to be built explicitly
  777. INPUTS-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  778. endif
  779. endif
  780. INPUTS-$(CONFIG_SPL) += spl/u-boot-spl.bin
  781. ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
  782. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  783. else
  784. ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
  785. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  786. else
  787. INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  788. endif
  789. endif
  790. INPUTS-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  791. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  792. INPUTS-$(CONFIG_BINMAN_STANDALONE_FDT) += u-boot.dtb
  793. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  794. INPUTS-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  795. endif
  796. INPUTS-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  797. ifneq ($(CONFIG_SPL_TARGET),)
  798. INPUTS-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  799. endif
  800. INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
  801. INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
  802. INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  803. # Generate this input file for binman
  804. ifeq ($(CONFIG_SPL),)
  805. INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
  806. endif
  807. # Add optional build target if defined in board/cpu/soc headers
  808. ifneq ($(CONFIG_BUILD_TARGET),)
  809. INPUTS-y += $(CONFIG_BUILD_TARGET:"%"=%)
  810. endif
  811. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  812. INPUTS-y += init_sp_bss_offset_check
  813. endif
  814. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  815. INPUTS-y += u-boot-with-dtb.bin
  816. endif
  817. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  818. # On ARM64 this target is produced by binman so we don't need this dep
  819. ifeq ($(CONFIG_ARM64),y)
  820. ifeq ($(CONFIG_SPL),y)
  821. # TODO: Get binman to generate this too
  822. INPUTS-y += u-boot-rockchip.bin
  823. endif
  824. else
  825. ifeq ($(CONFIG_SPL),y)
  826. # Generate these inputs for binman which will create the output files
  827. INPUTS-y += idbloader.img u-boot.img
  828. endif
  829. endif
  830. endif
  831. INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
  832. $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
  833. $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
  834. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  835. # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
  836. LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
  837. LDFLAGS_u-boot += --build-id=none
  838. ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
  839. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  840. endif
  841. # insure the checker run with the right endianness
  842. CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
  843. # the checker needs the correct machine size
  844. CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
  845. # Normally we fill empty space with 0xff
  846. quiet_cmd_objcopy = OBJCOPY $@
  847. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  848. $(OBJCOPYFLAGS_$(@F)) $< $@
  849. # Provide a version which does not do this, for use by EFI
  850. quiet_cmd_zobjcopy = OBJCOPY $@
  851. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  852. quiet_cmd_efipayload = OBJCOPY $@
  853. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  854. MKIMAGEOUTPUT ?= /dev/null
  855. quiet_cmd_mkimage = MKIMAGE $@
  856. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  857. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  858. quiet_cmd_mkfitimage = MKIMAGE $@
  859. cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) \
  860. -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@ \
  861. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  862. quiet_cmd_cat = CAT $@
  863. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  864. append = cat $(filter-out $< $(PHONY), $^) >> $@
  865. quiet_cmd_pad_cat = CAT $@
  866. cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
  867. quiet_cmd_lzma = LZMA $@
  868. cmd_lzma = lzma -c -z -k -9 $< > $@
  869. cfg: u-boot.cfg
  870. quiet_cmd_cfgcheck = CFGCHK $2
  871. cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
  872. $(srctree)/scripts/config_whitelist.txt $(srctree)
  873. # Concat the value of all the CONFIGs (result is 'y' or 'yy', etc. )
  874. got = $(foreach cfg,$(1),$($(cfg)))
  875. # expected value 'y for each one
  876. expect = $(foreach cfg,$(1),y)
  877. # Show a deprecation message
  878. # Args:
  879. # 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
  880. # 2: Name of component (e.g . "Ethernet drivers")
  881. # 3: Release deadline (e.g. "v202.07")
  882. # 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
  883. # Note: Script avoids bash construct, hence the strange double 'if'
  884. # (patches welcome!)
  885. define deprecated
  886. @if [ -n "$(strip $(4))" ]; then if [ "$(got)" != "$(expect)" ]; then \
  887. echo >&2 "===================== WARNING ======================"; \
  888. echo >&2 "This board does not use $(firstword $(1)) (Driver Model"; \
  889. echo >&2 "for $(2)). Please update the board to use"; \
  890. echo >&2 "$(firstword $(1)) before the $(3) release. Failure to"; \
  891. echo >&2 "update by the deadline may result in board removal."; \
  892. echo >&2 "See doc/driver-model/migration.rst for more info."; \
  893. echo >&2 "===================================================="; \
  894. fi; fi
  895. endef
  896. PHONY += inputs
  897. inputs: $(INPUTS-y)
  898. all: .binman_stamp inputs
  899. ifeq ($(CONFIG_BINMAN),y)
  900. $(call if_changed,binman)
  901. endif
  902. # Timestamp file to make sure that binman always runs
  903. .binman_stamp: FORCE
  904. @touch $@
  905. ifeq ($(CONFIG_DEPRECATED),y)
  906. $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
  907. endif
  908. ifeq ($(CONFIG_OF_EMBED),y)
  909. @echo >&2 "===================== WARNING ======================"
  910. @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
  911. @echo >&2 "be used for debugging purposes. Please use"
  912. @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
  913. @echo >&2 "See doc/README.fdt-control for more info."
  914. @echo >&2 "===================================================="
  915. endif
  916. ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
  917. @echo >&2 "===================== WARNING ======================"
  918. @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
  919. @echo >&2 "to binman instead, to avoid the proliferation of"
  920. @echo >&2 "arch-specific scripts with no tests."
  921. @echo >&2 "===================================================="
  922. endif
  923. ifneq ($(CONFIG_DM),y)
  924. @echo >&2 "===================== WARNING ======================"
  925. @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
  926. @echo >&2 "compulsory starting with the v2020.01 release."
  927. @echo >&2 "Failure to update may result in board removal."
  928. @echo >&2 "See doc/driver-model/migration.rst for more info."
  929. @echo >&2 "===================================================="
  930. endif
  931. $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
  932. $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
  933. $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
  934. $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
  935. @# Check that this build does not use CONFIG options that we do not
  936. @# know about unless they are in Kconfig. All the existing CONFIG
  937. @# options are whitelisted, so new ones should not be added.
  938. $(call cmd,cfgcheck,u-boot.cfg)
  939. PHONY += dtbs
  940. dtbs: dts/dt.dtb
  941. @:
  942. dts/dt.dtb: u-boot
  943. $(Q)$(MAKE) $(build)=dts dtbs
  944. quiet_cmd_copy = COPY $@
  945. cmd_copy = cp $< $@
  946. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  947. ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
  948. FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
  949. else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
  950. FINAL_DTB_CONTAINER = fit-dtb.blob.gz
  951. else
  952. FINAL_DTB_CONTAINER = fit-dtb.blob
  953. endif
  954. fit-dtb.blob.gz: fit-dtb.blob
  955. @gzip -kf9 $< > $@
  956. fit-dtb.blob.lzo: fit-dtb.blob
  957. @lzop -f9 $< > $@
  958. fit-dtb.blob: dts/dt.dtb FORCE
  959. $(call if_changed,mkimage)
  960. ifneq ($(SOURCE_DATE_EPOCH),)
  961. touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
  962. chmod 0600 fit-dtb.blob
  963. endif
  964. MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  965. -a 0 -e 0 -E \
  966. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
  967. MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
  968. ifneq ($(EXT_DTB),)
  969. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
  970. $(call if_changed,cat)
  971. else
  972. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
  973. $(call if_changed,cat)
  974. endif
  975. u-boot.bin: u-boot-fit-dtb.bin FORCE
  976. $(call if_changed,copy)
  977. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  978. $(call if_changed,cat)
  979. else ifeq ($(CONFIG_OF_SEPARATE),y)
  980. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  981. $(call if_changed,cat)
  982. u-boot.bin: u-boot-dtb.bin FORCE
  983. $(call if_changed,copy)
  984. else
  985. u-boot.bin: u-boot-nodtb.bin FORCE
  986. $(call if_changed,copy)
  987. endif
  988. # we call Makefile in arch/arm/mach-imx which
  989. # has targets which are dependent on targets defined
  990. # here. make could not resolve them and we must ensure
  991. # that they are finished before calling imx targets
  992. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  993. IMX_DEPS = u-boot-fit-dtb.bin
  994. endif
  995. %.imx: $(IMX_DEPS) %.bin
  996. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  997. $(BOARD_SIZE_CHECK)
  998. %.vyb: %.imx
  999. $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
  1000. quiet_cmd_copy = COPY $@
  1001. cmd_copy = cp $< $@
  1002. u-boot.dtb: dts/dt.dtb
  1003. $(call cmd,copy)
  1004. OBJCOPYFLAGS_u-boot.hex := -O ihex
  1005. OBJCOPYFLAGS_u-boot.srec := -O srec
  1006. u-boot.hex u-boot.srec: u-boot FORCE
  1007. $(call if_changed,objcopy)
  1008. OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
  1009. u-boot-elf.srec: u-boot.elf FORCE
  1010. $(call if_changed,objcopy)
  1011. OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
  1012. spl/u-boot-spl.srec: spl/u-boot-spl FORCE
  1013. $(call if_changed,objcopy)
  1014. %.scif: %.srec
  1015. $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
  1016. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  1017. $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
  1018. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
  1019. binary_size_check: u-boot-nodtb.bin FORCE
  1020. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  1021. map_size=$(shell cat u-boot.map | \
  1022. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  1023. | sed 's/0X//g' \
  1024. | bc); \
  1025. if [ "" != "$$map_size" ]; then \
  1026. if test $$map_size -ne $$file_size; then \
  1027. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  1028. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  1029. exit 1; \
  1030. fi \
  1031. fi
  1032. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  1033. ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
  1034. subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
  1035. else
  1036. subtract_sys_malloc_f_len = true
  1037. endif
  1038. # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
  1039. # so low that the DTB could probably use 90%+ of the available space, for
  1040. # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
  1041. # safe for now and tweak this later if space becomes tight.
  1042. # A rejected alternative would be to check that some absolute minimum stack
  1043. # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
  1044. # deliberately build-specific, to take account of build-to-build stack usage
  1045. # differences due to different feature sets, there is no common absolute value
  1046. # to check against.
  1047. init_sp_bss_offset_check: u-boot.dtb FORCE
  1048. @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
  1049. space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
  1050. $(subtract_sys_malloc_f_len) ; \
  1051. quarter_space=$$(($${space} / 4)) ; \
  1052. if [ $${dtb_size} -gt $${quarter_space} ]; then \
  1053. echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
  1054. echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
  1055. exit 1 ; \
  1056. fi
  1057. endif
  1058. shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
  1059. quiet_cmd_objcopy_uboot = OBJCOPY $@
  1060. ifdef cmd_static_rela
  1061. cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
  1062. else
  1063. cmd_objcopy_uboot = $(cmd_objcopy)
  1064. endif
  1065. u-boot-nodtb.bin: u-boot FORCE
  1066. $(call if_changed,objcopy_uboot)
  1067. $(BOARD_SIZE_CHECK)
  1068. u-boot.ldr: u-boot
  1069. $(CREATE_LDR_ENV)
  1070. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  1071. $(BOARD_SIZE_CHECK)
  1072. # binman
  1073. # ---------------------------------------------------------------------------
  1074. # Use 'make BINMAN_DEBUG=1' to enable debugging
  1075. # Use 'make BINMAN_VERBOSE=3' to set vebosity level
  1076. default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE))
  1077. quiet_cmd_binman = BINMAN $@
  1078. cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
  1079. --toolpath $(objtree)/tools \
  1080. $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
  1081. build -u -d u-boot.dtb -O . -m --allow-missing \
  1082. -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
  1083. -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
  1084. -a atf-bl31-path=${BL31} \
  1085. -a opensbi-path=${OPENSBI} \
  1086. -a default-dt=$(default_dt) \
  1087. -a scp-path=$(SCP) \
  1088. -a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
  1089. -a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
  1090. -a spl-dtb=$(CONFIG_SPL_OF_REAL) \
  1091. -a tpl-dtb=$(CONFIG_SPL_OF_REAL) \
  1092. $(BINMAN_$(@F))
  1093. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  1094. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  1095. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  1096. $(call if_changed,objcopy)
  1097. #
  1098. # U-Boot entry point, needed for booting of full-blown U-Boot
  1099. # from the SPL U-Boot version.
  1100. #
  1101. ifndef CONFIG_SYS_UBOOT_START
  1102. CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
  1103. endif
  1104. # Boards with more complex image requirements can provide an .its source file
  1105. # or a generator script
  1106. # NOTE: Please do not use this. We are migrating away from Makefile rules to use
  1107. # binman instead.
  1108. ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
  1109. U_BOOT_ITS := u-boot.its
  1110. $(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
  1111. $(call if_changed,copy)
  1112. else
  1113. ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
  1114. U_BOOT_ITS := u-boot.its
  1115. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
  1116. U_BOOT_ITS_DEPS += u-boot-nodtb.bin
  1117. endif
  1118. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
  1119. U_BOOT_ITS_DEPS += u-boot
  1120. endif
  1121. $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
  1122. $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
  1123. $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
  1124. endif
  1125. endif
  1126. ifdef CONFIG_SPL_LOAD_FIT
  1127. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1128. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1129. -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
  1130. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  1131. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
  1132. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
  1133. $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
  1134. else
  1135. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  1136. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1137. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1138. MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
  1139. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1140. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1141. u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
  1142. endif
  1143. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  1144. # Some boards have the kwbimage.cfg file written in advance, while some
  1145. # other boards generate it on the fly during the build in the build tree.
  1146. # Let's check if the file exists in the build tree first, otherwise we
  1147. # fall back to use the one in the source tree.
  1148. KWD_CONFIG_FILE = $(shell \
  1149. if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
  1150. echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1151. else \
  1152. echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1153. fi)
  1154. MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
  1155. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  1156. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
  1157. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1158. $(if $(KEYDIR),-k $(KEYDIR))
  1159. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1160. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  1161. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1162. UBOOT_BIN := u-boot-with-dtb.bin
  1163. else
  1164. UBOOT_BIN := u-boot.bin
  1165. endif
  1166. MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
  1167. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1168. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1169. u-boot.bin.lzma: u-boot.bin FORCE
  1170. $(call if_changed,lzma)
  1171. u-boot-lzma.img: u-boot.bin.lzma FORCE
  1172. $(call if_changed,mkimage)
  1173. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
  1174. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
  1175. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE)$(CONFIG_BINMAN_STANDALONE_FDT),dts/dt.dtb) \
  1176. ,$(UBOOT_BIN)) FORCE
  1177. $(call if_changed,mkimage)
  1178. $(BOARD_SIZE_CHECK)
  1179. ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
  1180. MKIMAGEFLAGS_u-boot.itb =
  1181. else
  1182. MKIMAGEFLAGS_u-boot.itb = -E
  1183. endif
  1184. MKIMAGEFLAGS_u-boot.itb += -B 0x8
  1185. ifdef U_BOOT_ITS
  1186. u-boot.itb: u-boot-nodtb.bin \
  1187. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1188. $(U_BOOT_ITS) FORCE
  1189. $(call if_changed,mkfitimage)
  1190. $(BOARD_SIZE_CHECK)
  1191. endif
  1192. u-boot-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
  1193. $(call if_changed,mkimage)
  1194. u-boot.sha1: u-boot.bin
  1195. tools/ubsha1 u-boot.bin
  1196. u-boot.dis: u-boot
  1197. $(OBJDUMP) -d $< > $@
  1198. ifneq ($(CONFIG_SPL_PAYLOAD),)
  1199. SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
  1200. else
  1201. SPL_PAYLOAD := u-boot.bin
  1202. endif
  1203. SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
  1204. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  1205. --pad-to=$(CONFIG_SPL_PAD_TO)
  1206. u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
  1207. $(call if_changed,pad_cat)
  1208. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  1209. # TPL + SPL
  1210. ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
  1211. MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
  1212. tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
  1213. $(call if_changed,mkimage)
  1214. idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
  1215. $(call if_changed,cat)
  1216. else
  1217. MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
  1218. idbloader.img: spl/u-boot-spl.bin FORCE
  1219. $(call if_changed,mkimage)
  1220. endif
  1221. ifeq ($(CONFIG_ARM64),y)
  1222. OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
  1223. --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
  1224. u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
  1225. $(call if_changed,pad_cat)
  1226. endif # CONFIG_ARM64
  1227. endif # CONFIG_ARCH_ROCKCHIP
  1228. ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
  1229. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  1230. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  1231. $(call if_changed,mkimage)
  1232. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1233. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  1234. $(call if_changed,objcopy)
  1235. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1236. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  1237. $(call if_changed,objcopy)
  1238. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  1239. $(call if_changed,cat)
  1240. endif
  1241. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  1242. --pad-to=$(CONFIG_TPL_PAD_TO)
  1243. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  1244. $(call if_changed,pad_cat)
  1245. SPL: spl/u-boot-spl.bin FORCE
  1246. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1247. ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
  1248. ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
  1249. u-boot.cnt: u-boot.bin FORCE
  1250. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1251. flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
  1252. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1253. else
  1254. ifeq ($(CONFIG_BINMAN),y)
  1255. flash.bin: spl/u-boot-spl.bin $(INPUTS-y) FORCE
  1256. $(call if_changed,binman)
  1257. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1258. else
  1259. flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
  1260. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1261. endif
  1262. endif
  1263. endif
  1264. u-boot.uim: u-boot.bin FORCE
  1265. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1266. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
  1267. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1268. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  1269. u-boot.ubl: u-boot-with-spl.bin FORCE
  1270. $(call if_changed,mkimage)
  1271. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  1272. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  1273. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  1274. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  1275. $(call if_changed,mkimage)
  1276. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1277. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  1278. $(call if_changed,pad_cat)
  1279. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  1280. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  1281. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  1282. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  1283. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  1284. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  1285. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  1286. $(call if_changed,mkimage)
  1287. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  1288. quiet_cmd_gensplx4 = GENSPLX4 $@
  1289. cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \
  1290. --pad-to=$(CONFIG_SPL_PAD_TO) \
  1291. spl/u-boot-spl.sfp spl/u-boot-spl.sfp && \
  1292. cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1293. spl/u-boot-spl.sfp spl/u-boot-spl.sfp > $@ || { rm -f $@; false; }
  1294. spl/u-boot-splx4.sfp: spl/u-boot-spl.sfp FORCE
  1295. $(call if_changed,gensplx4)
  1296. quiet_cmd_socboot = SOCBOOT $@
  1297. cmd_socboot = cat spl/u-boot-splx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1298. u-boot-with-spl.sfp: spl/u-boot-splx4.sfp u-boot.img FORCE
  1299. $(call if_changed,socboot)
  1300. quiet_cmd_gensplpadx4 = GENSPLPADX4 $@
  1301. cmd_gensplpadx4 = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
  1302. cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1303. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1304. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1305. spl/u-boot-spl.sfp spl/u-boot-spl.pad > $@ || \
  1306. { rm -f $@ spl/u-boot-spl.pad; false; }
  1307. u-boot-spl-padx4.sfp: spl/u-boot-spl.sfp FORCE
  1308. $(call if_changed,gensplpadx4)
  1309. quiet_cmd_socnandboot = SOCNANDBOOT $@
  1310. cmd_socnandboot = cat u-boot-spl-padx4.sfp u-boot.img > $@ || { rm -f $@; false; }
  1311. u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
  1312. $(call if_changed,socnandboot)
  1313. endif
  1314. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1315. u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
  1316. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
  1317. $(call if_changed,binman)
  1318. ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
  1319. OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
  1320. u-boot-br.bin: u-boot FORCE
  1321. $(call if_changed,objcopy)
  1322. endif
  1323. endif
  1324. quiet_cmd_ldr = LD $@
  1325. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  1326. $(filter-out FORCE,$^) -o $@
  1327. ifdef CONFIG_X86
  1328. OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
  1329. u-boot-x86-start16.bin: u-boot FORCE
  1330. $(call if_changed,objcopy)
  1331. OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
  1332. u-boot-x86-reset16.bin: u-boot FORCE
  1333. $(call if_changed,objcopy)
  1334. endif # CONFIG_X86
  1335. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  1336. u-boot-app.efi: u-boot FORCE
  1337. $(call if_changed,zobjcopy)
  1338. u-boot.bin.o: u-boot.bin FORCE
  1339. $(call if_changed,efipayload)
  1340. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  1341. $(call if_changed_dep,cpp_lds)
  1342. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  1343. quiet_cmd_u-boot_payload ?= LD $@
  1344. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  1345. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  1346. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  1347. $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
  1348. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  1349. $(call if_changed,u-boot_payload)
  1350. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  1351. u-boot-payload.efi: u-boot-payload FORCE
  1352. $(call if_changed,zobjcopy)
  1353. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  1354. $(call if_changed,cat)
  1355. #Add a target to create boot binary having SPL binary in PBI format
  1356. #concatenated with u-boot binary. It is need by PowerPC SoC having
  1357. #internal SRAM <= 512KB.
  1358. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1359. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  1360. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  1361. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  1362. $(call if_changed,mkimage)
  1363. ifeq ($(ARCH),arm)
  1364. UBOOT_BINLOAD := u-boot.img
  1365. else
  1366. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1367. UBOOT_BINLOAD := u-boot-with-dtb.bin
  1368. else
  1369. UBOOT_BINLOAD := u-boot.bin
  1370. endif
  1371. endif
  1372. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1373. --gap-fill=0xff
  1374. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  1375. $(call if_changed,pad_cat)
  1376. # PPC4xx needs the SPL at the end of the image, since the reset vector
  1377. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  1378. # and need to introduce a new build target with the full blown U-Boot
  1379. # at the start padded up to the start of the SPL image. And then concat
  1380. # the SPL image to the end.
  1381. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  1382. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  1383. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  1384. $(call if_changed,pad_cat)
  1385. quiet_cmd_u-boot-elf ?= LD $@
  1386. cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
  1387. -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
  1388. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  1389. u-boot.elf: u-boot.bin u-boot-elf.lds
  1390. $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
  1391. $(call if_changed,u-boot-elf)
  1392. u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
  1393. $(call if_changed_dep,cpp_lds)
  1394. # MediaTek's ARM-based u-boot needs a header to contains its load address
  1395. # which is parsed by the BootROM.
  1396. # If the SPL build is enabled, the header will be added to the spl binary,
  1397. # and the spl binary and the u-boot.img will be combined into one file.
  1398. # Otherwise the header will be added to the u-boot.bin directly.
  1399. ifeq ($(CONFIG_SPL),y)
  1400. spl/u-boot-spl-mtk.bin: spl/u-boot-spl
  1401. u-boot-mtk.bin: u-boot-with-spl.bin
  1402. $(call if_changed,copy)
  1403. else
  1404. MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
  1405. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1406. -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
  1407. u-boot-mtk.bin: u-boot.bin FORCE
  1408. $(call if_changed,mkimage)
  1409. endif
  1410. quiet_cmd_endian_swap = SWAP $@
  1411. cmd_endian_swap = $(srctree)/tools/endian-swap.py $< $@
  1412. u-boot-swap.bin: u-boot.bin FORCE
  1413. $(call if_changed,endian_swap)
  1414. ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
  1415. # Generate linker list symbols references to force compiler to not optimize
  1416. # them away when compiling with LTO
  1417. ifdef CONFIG_LTO
  1418. u-boot-keep-syms-lto := keep-syms-lto.o
  1419. u-boot-keep-syms-lto_c := $(patsubst %.o,%.c,$(u-boot-keep-syms-lto))
  1420. quiet_cmd_keep_syms_lto = KSL $@
  1421. cmd_keep_syms_lto = \
  1422. $(srctree)/scripts/gen_ll_addressable_symbols.sh $(NM) $^ > $@
  1423. quiet_cmd_keep_syms_lto_cc = KSLCC $@
  1424. cmd_keep_syms_lto_cc = \
  1425. $(CC) $(filter-out $(LTO_CFLAGS),$(c_flags)) -c -o $@ $<
  1426. $(u-boot-keep-syms-lto_c): $(u-boot-main)
  1427. $(call if_changed,keep_syms_lto)
  1428. $(u-boot-keep-syms-lto): $(u-boot-keep-syms-lto_c)
  1429. $(call if_changed,keep_syms_lto_cc)
  1430. else
  1431. u-boot-keep-syms-lto :=
  1432. endif
  1433. # Rule to link u-boot
  1434. # May be overridden by arch/$(ARCH)/config.mk
  1435. ifdef CONFIG_LTO
  1436. quiet_cmd_u-boot__ ?= LTO $@
  1437. cmd_u-boot__ ?= \
  1438. $(CC) -nostdlib -nostartfiles \
  1439. $(LTO_FINAL_LDFLAGS) $(c_flags) \
  1440. $(KBUILD_LDFLAGS:%=-Wl,%) $(LDFLAGS_u-boot:%=-Wl,%) -o $@ \
  1441. -T u-boot.lds $(u-boot-init) \
  1442. -Wl,--whole-archive \
  1443. $(u-boot-main) \
  1444. $(u-boot-keep-syms-lto) \
  1445. $(PLATFORM_LIBS) \
  1446. -Wl,--no-whole-archive \
  1447. -Wl,-Map,u-boot.map; \
  1448. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1449. else
  1450. quiet_cmd_u-boot__ ?= LD $@
  1451. cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  1452. -T u-boot.lds $(u-boot-init) \
  1453. --whole-archive \
  1454. $(u-boot-main) \
  1455. --no-whole-archive \
  1456. $(PLATFORM_LIBS) -Map u-boot.map; \
  1457. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1458. endif
  1459. quiet_cmd_smap = GEN common/system_map.o
  1460. cmd_smap = \
  1461. smap=`$(call SYSTEM_MAP,u-boot) | \
  1462. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  1463. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  1464. -c $(srctree)/common/system_map.c -o common/system_map.o
  1465. u-boot: $(u-boot-init) $(u-boot-main) $(u-boot-keep-syms-lto) u-boot.lds FORCE
  1466. +$(call if_changed,u-boot__)
  1467. ifeq ($(CONFIG_KALLSYMS),y)
  1468. $(call cmd,smap)
  1469. $(call cmd,u-boot__) common/system_map.o
  1470. endif
  1471. ifeq ($(CONFIG_RISCV),y)
  1472. @tools/prelink-riscv $@ 0
  1473. endif
  1474. quiet_cmd_sym ?= SYM $@
  1475. cmd_sym ?= $(OBJDUMP) -t $< > $@
  1476. u-boot.sym: u-boot FORCE
  1477. $(call if_changed,sym)
  1478. # The actual objects are generated when descending,
  1479. # make sure no implicit rule kicks in
  1480. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  1481. # Handle descending into subdirectories listed in $(u-boot-dirs)
  1482. # Preset locale variables to speed up the build process. Limit locale
  1483. # tweaks to this spot to avoid wrong language settings when running
  1484. # make menuconfig etc.
  1485. # Error messages still appears in the original language
  1486. PHONY += $(u-boot-dirs)
  1487. $(u-boot-dirs): prepare scripts
  1488. $(Q)$(MAKE) $(build)=$@
  1489. tools: prepare
  1490. # The "tools" are needed early
  1491. $(filter-out tools, $(u-boot-dirs)): tools
  1492. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  1493. # is "yes"), so compile examples after U-Boot is compiled.
  1494. examples: $(filter-out examples, $(u-boot-dirs))
  1495. define filechk_uboot.release
  1496. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1497. endef
  1498. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  1499. include/config/uboot.release: include/config/auto.conf FORCE
  1500. $(call filechk,uboot.release)
  1501. # Things we need to do before we recursively start building the kernel
  1502. # or the modules are listed in "prepare".
  1503. # A multi level approach is used. prepareN is processed before prepareN-1.
  1504. # archprepare is used in arch Makefiles and when processed asm symlink,
  1505. # version.h and scripts_basic is processed / created.
  1506. # Listed in dependency order
  1507. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1508. # prepare3 is used to check if we are building in a separate output directory,
  1509. # and if so do:
  1510. # 1) Check that make has not been executed in the kernel src $(srctree)
  1511. prepare3: include/config/uboot.release
  1512. ifneq ($(KBUILD_SRC),)
  1513. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1514. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1515. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1516. echo >&2 " in the '$(srctree)' directory.";\
  1517. /bin/false; \
  1518. fi;
  1519. endif
  1520. # prepare2 creates a makefile if using a separate output directory
  1521. prepare2: prepare3 outputmakefile cfg
  1522. prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \
  1523. include/config/auto.conf
  1524. ifeq ($(wildcard $(LDSCRIPT)),)
  1525. @echo >&2 " Could not find linker script."
  1526. @/bin/false
  1527. endif
  1528. ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
  1529. prepare1: $(defaultenv_h)
  1530. envtools: $(defaultenv_h)
  1531. endif
  1532. archprepare: prepare1 scripts_basic
  1533. prepare0: archprepare FORCE
  1534. $(Q)$(MAKE) $(build)=.
  1535. # All the preparing..
  1536. prepare: prepare0
  1537. # Generate some files
  1538. # ---------------------------------------------------------------------------
  1539. # Use sed to remove leading zeros from PATCHLEVEL to avoid using octal numbers
  1540. define filechk_version.h
  1541. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1542. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1543. echo \#define U_BOOT_VERSION_NUM $(VERSION); \
  1544. echo \#define U_BOOT_VERSION_NUM_PATCH $$(echo $(PATCHLEVEL) | \
  1545. sed -e "s/^0*//"); \
  1546. echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
  1547. echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
  1548. endef
  1549. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1550. # The BSD date on the other hand behaves different and would produce errors
  1551. # with the misused '-d' switch. Respect that and search a working date with
  1552. # well known pre- and suffixes for the GNU variant of date.
  1553. define filechk_timestamp.h
  1554. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1555. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1556. DATE=""; \
  1557. for date in gdate date.gnu date; do \
  1558. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1559. done; \
  1560. if test -n "$${DATE}"; then \
  1561. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1562. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1563. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1564. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_EPOCH %s'; \
  1565. else \
  1566. return 42; \
  1567. fi; \
  1568. else \
  1569. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1570. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1571. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1572. LC_ALL=C date +'#define U_BOOT_EPOCH %s'; \
  1573. fi)
  1574. endef
  1575. define filechk_defaultenv.h
  1576. ( { grep -v '^#' | grep -v '^$$' || true ; echo '' ; } | \
  1577. tr '\n' '\0' | \
  1578. sed -e 's/\\\x0\s*//g' | \
  1579. xxd -i ; )
  1580. endef
  1581. define filechk_dt.h
  1582. (if test -n "$${DEVICE_TREE}"; then \
  1583. echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
  1584. else \
  1585. echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
  1586. fi)
  1587. endef
  1588. $(version_h): include/config/uboot.release FORCE
  1589. $(call filechk,version.h)
  1590. $(timestamp_h): $(srctree)/Makefile FORCE
  1591. $(call filechk,timestamp.h)
  1592. $(dt_h): $(srctree)/Makefile FORCE
  1593. $(call filechk,dt.h)
  1594. $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
  1595. $(call filechk,defaultenv.h)
  1596. # ---------------------------------------------------------------------------
  1597. # Devicetree files
  1598. ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
  1599. dtstree := arch/$(SRCARCH)/boot/dts
  1600. endif
  1601. ifneq ($(dtstree),)
  1602. %.dtb: prepare3 scripts_dtc
  1603. $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
  1604. PHONY += dtbs dtbs_install
  1605. dtbs: prepare3 scripts_dtc
  1606. $(Q)$(MAKE) $(build)=$(dtstree)
  1607. dtbs_install:
  1608. $(Q)$(MAKE) $(dtbinst)=$(dtstree)
  1609. ifdef CONFIG_OF_EARLY_FLATTREE
  1610. all: dtbs
  1611. endif
  1612. endif
  1613. # Check dtc and pylibfdt, if DTC is provided, else build them
  1614. PHONY += scripts_dtc
  1615. scripts_dtc: scripts_basic
  1616. $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
  1617. $(MAKE) $(build)=scripts/dtc; \
  1618. else \
  1619. if ! $(DTC) -v >/dev/null; then \
  1620. echo '*** Failed to check dtc version: $(DTC)'; \
  1621. false; \
  1622. else \
  1623. if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
  1624. echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
  1625. false; \
  1626. else \
  1627. if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
  1628. if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
  1629. echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
  1630. false; \
  1631. fi; \
  1632. fi; \
  1633. fi; \
  1634. fi; \
  1635. fi
  1636. # ---------------------------------------------------------------------------
  1637. quiet_cmd_cpp_lds = LDS $@
  1638. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
  1639. -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
  1640. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1641. $(call if_changed_dep,cpp_lds)
  1642. spl/u-boot-spl.bin: spl/u-boot-spl
  1643. @:
  1644. $(SPL_SIZE_CHECK)
  1645. spl/u-boot-spl-dtb.bin: spl/u-boot-spl
  1646. @:
  1647. spl/u-boot-spl-dtb.hex: spl/u-boot-spl
  1648. @:
  1649. spl/u-boot-spl: tools prepare \
  1650. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
  1651. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
  1652. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1653. spl/sunxi-spl.bin: spl/u-boot-spl
  1654. @:
  1655. spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
  1656. @:
  1657. spl/u-boot-spl.sfp: spl/u-boot-spl
  1658. @:
  1659. spl/boot.bin: spl/u-boot-spl
  1660. @:
  1661. tpl/u-boot-tpl.bin: tools prepare \
  1662. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
  1663. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1664. $(TPL_SIZE_CHECK)
  1665. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1666. FIND := find
  1667. FINDFLAGS := -L
  1668. tags ctags:
  1669. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1670. -name '*.[chS]' -print`
  1671. ln -s ctags tags
  1672. etags:
  1673. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1674. -name '*.[chS]' -print`
  1675. cscope:
  1676. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1677. cscope.files
  1678. @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
  1679. grep -xvf - cscope.files > cscope.files.no-symlinks; \
  1680. mv cscope.files.no-symlinks cscope.files
  1681. cscope -b -q -k
  1682. SYSTEM_MAP = \
  1683. $(NM) $1 | \
  1684. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1685. LC_ALL=C sort
  1686. System.map: u-boot
  1687. @$(call SYSTEM_MAP,$<) > $@
  1688. #########################################################################
  1689. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1690. # R_AARCH64_RELATIVE (64-bit).
  1691. checkarmreloc: u-boot
  1692. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1693. grep R_A | sort -u`"; \
  1694. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1695. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1696. echo "$< contains unexpected relocations: $$RELOC"; \
  1697. false; \
  1698. fi
  1699. tools/version.h: include/version.h
  1700. $(Q)mkdir -p $(dir $@)
  1701. $(call if_changed,copy)
  1702. envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1703. $(Q)$(MAKE) $(build)=tools/env
  1704. tools-only: export TOOLS_ONLY=y
  1705. tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1706. $(Q)$(MAKE) $(build)=tools
  1707. tools-all: export HOST_TOOLS_ALL=y
  1708. tools-all: envtools tools ;
  1709. cross_tools: export CROSS_BUILD_TOOLS=y
  1710. cross_tools: tools ;
  1711. .PHONY : CHANGELOG
  1712. CHANGELOG:
  1713. git log --no-merges U-Boot-1_1_5.. | \
  1714. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1715. #########################################################################
  1716. ###
  1717. # Cleaning is done on three levels.
  1718. # make clean Delete most generated files
  1719. # Leave enough to build external modules
  1720. # make mrproper Delete the current configuration, and all generated files
  1721. # make distclean Remove editor backup files, patch leftover files and the like
  1722. # Directories & files removed with 'make clean'
  1723. CLEAN_DIRS += $(MODVERDIR) \
  1724. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1725. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1726. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
  1727. boot* u-boot* MLO* SPL System.map fit-dtb.blob* \
  1728. u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
  1729. lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
  1730. idbloader.img flash.bin flash.log defconfig keep-syms-lto.c
  1731. # Directories & files removed with 'make mrproper'
  1732. MRPROPER_DIRS += include/config include/generated spl tpl \
  1733. .tmp_objdiff doc/output include/asm
  1734. # Remove include/asm symlink created by U-Boot before v2014.01
  1735. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1736. ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
  1737. drivers/video/fonts/*.S include/asm
  1738. # clean - Delete most, but leave enough to build external modules
  1739. #
  1740. clean: rm-dirs := $(CLEAN_DIRS)
  1741. clean: rm-files := $(CLEAN_FILES)
  1742. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1743. clean-dirs := $(addprefix _clean_, $(clean-dirs))
  1744. PHONY += $(clean-dirs) clean archclean
  1745. $(clean-dirs):
  1746. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1747. clean: $(clean-dirs)
  1748. $(call cmd,rmdirs)
  1749. $(call cmd,rmfiles)
  1750. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1751. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1752. -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
  1753. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1754. -o -name '*.lex.c' -o -name '*.tab.[ch]' \
  1755. -o -name '*.asn1.[ch]' \
  1756. -o -name '*.symtypes' -o -name 'modules.order' \
  1757. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1758. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1759. -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
  1760. -type f -print | xargs rm -f
  1761. # mrproper - Delete all generated files, including .config
  1762. #
  1763. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1764. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1765. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1766. PHONY += $(mrproper-dirs) mrproper archmrproper
  1767. $(mrproper-dirs):
  1768. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1769. mrproper: clean $(mrproper-dirs)
  1770. $(call cmd,rmdirs)
  1771. $(call cmd,rmfiles)
  1772. @rm -f arch/*/include/asm/arch
  1773. # distclean
  1774. #
  1775. PHONY += distclean
  1776. distclean: mrproper
  1777. @find $(srctree) $(RCS_FIND_IGNORE) \
  1778. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1779. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1780. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1781. -o -name '*.pyc' \) \
  1782. -type f -print | xargs rm -f
  1783. @rm -f boards.cfg CHANGELOG
  1784. backup:
  1785. F=`basename $(srctree)` ; cd .. ; \
  1786. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1787. help:
  1788. @echo 'Cleaning targets:'
  1789. @echo ' clean - Remove most generated files but keep the config'
  1790. @echo ' mrproper - Remove all generated files + config + various backup files'
  1791. @echo ' distclean - mrproper + remove editor backup and patch files'
  1792. @echo ''
  1793. @echo 'Configuration targets:'
  1794. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1795. @echo ''
  1796. @echo 'Test targets:'
  1797. @echo ''
  1798. @echo ' check - Run all automated tests that use sandbox'
  1799. @echo ' qcheck - Run quick automated tests that use sandbox'
  1800. @echo ' tcheck - Run quick automated tests on tools'
  1801. @echo ''
  1802. @echo 'Other generic targets:'
  1803. @echo ' all - Build all necessary images depending on configuration'
  1804. @echo ' tests - Build U-Boot for sandbox and run tests'
  1805. @echo '* u-boot - Build the bare u-boot'
  1806. @echo ' dir/ - Build all files in dir and below'
  1807. @echo ' dir/file.[oisS] - Build specified target only'
  1808. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1809. @echo ' (requires a recent binutils and recent build (System.map))'
  1810. @echo ' tags/ctags - Generate ctags file for editors'
  1811. @echo ' etags - Generate etags file for editors'
  1812. @echo ' cscope - Generate cscope index'
  1813. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1814. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1815. @echo " cfg - Don't build, just create the .cfg files"
  1816. @echo " envtools - Build only the target-side environment tools"
  1817. @echo ''
  1818. @echo 'Static analysers'
  1819. @echo ' checkstack - Generate a list of stack hogs'
  1820. @echo ' coccicheck - Execute static code analysis with Coccinelle'
  1821. @echo ''
  1822. @echo 'Documentation targets:'
  1823. @$(MAKE) -f $(srctree)/doc/Makefile dochelp
  1824. @echo ''
  1825. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1826. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1827. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1828. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1829. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1830. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1831. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1832. @echo ' 1: warnings which may be relevant and do not occur too often'
  1833. @echo ' 2: warnings which occur quite often but may still be relevant'
  1834. @echo ' 3: more obscure warnings, can most likely be ignored'
  1835. @echo ' Multiple levels can be combined with W=12 or W=123'
  1836. @echo ''
  1837. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1838. @echo 'For further info see the ./README file'
  1839. tests check:
  1840. $(srctree)/test/run
  1841. qcheck:
  1842. $(srctree)/test/run quick
  1843. tcheck:
  1844. $(srctree)/test/run tools
  1845. # Documentation targets
  1846. # ---------------------------------------------------------------------------
  1847. DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
  1848. linkcheckdocs dochelp refcheckdocs
  1849. PHONY += $(DOC_TARGETS)
  1850. $(DOC_TARGETS): scripts_basic FORCE
  1851. $(Q)$(MAKE) $(build)=doc $@
  1852. PHONY += checkstack ubootrelease ubootversion
  1853. checkstack:
  1854. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1855. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1856. ubootrelease:
  1857. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1858. ubootversion:
  1859. @echo $(UBOOTVERSION)
  1860. # Single targets
  1861. # ---------------------------------------------------------------------------
  1862. # Single targets are compatible with:
  1863. # - build with mixed source and output
  1864. # - build with separate output dir 'make O=...'
  1865. # - external modules
  1866. #
  1867. # target-dir => where to store outputfile
  1868. # build-dir => directory in kernel source tree to use
  1869. ifeq ($(KBUILD_EXTMOD),)
  1870. build-dir = $(patsubst %/,%,$(dir $@))
  1871. target-dir = $(dir $@)
  1872. else
  1873. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1874. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1875. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1876. endif
  1877. %.s: %.c prepare scripts FORCE
  1878. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1879. %.i: %.c prepare scripts FORCE
  1880. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1881. %.o: %.c prepare scripts FORCE
  1882. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1883. %.lst: %.c prepare scripts FORCE
  1884. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1885. %.s: %.S prepare scripts FORCE
  1886. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1887. %.o: %.S prepare scripts FORCE
  1888. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1889. %.symtypes: %.c prepare scripts FORCE
  1890. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1891. # Modules
  1892. /: prepare scripts FORCE
  1893. $(cmd_crmodverdir)
  1894. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1895. $(build)=$(build-dir)
  1896. %/: prepare scripts FORCE
  1897. $(cmd_crmodverdir)
  1898. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1899. $(build)=$(build-dir)
  1900. %.ko: prepare scripts FORCE
  1901. $(cmd_crmodverdir)
  1902. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1903. $(build)=$(build-dir) $(@:.ko=.o)
  1904. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1905. quiet_cmd_genenv = GENENV $@
  1906. cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
  1907. sed --in-place -e 's/\x00/\x0A/g' $@
  1908. u-boot-initial-env: u-boot.bin
  1909. $(call if_changed,genenv)
  1910. # Consistency checks
  1911. # ---------------------------------------------------------------------------
  1912. PHONY += coccicheck
  1913. coccicheck:
  1914. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
  1915. # FIXME Should go into a make.lib or something
  1916. # ===========================================================================
  1917. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1918. cmd_rmdirs = rm -rf $(rm-dirs)
  1919. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1920. cmd_rmfiles = rm -f $(rm-files)
  1921. # read all saved command lines
  1922. cmd_files := $(wildcard .*.cmd)
  1923. ifneq ($(cmd_files),)
  1924. $(cmd_files): ; # Do not try to update included dependency files
  1925. include $(cmd_files)
  1926. endif
  1927. endif #ifeq ($(config-targets),1)
  1928. endif #ifeq ($(mixed-targets),1)
  1929. endif # skip-makefile
  1930. PHONY += FORCE
  1931. FORCE:
  1932. # Declare the contents of the PHONY variable as phony. We keep that
  1933. # information in a variable so we can use it in if_changed and friends.
  1934. .PHONY: $(PHONY)