Makefile 70 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134
  1. # SPDX-License-Identifier: GPL-2.0+
  2. VERSION = 2020
  3. PATCHLEVEL = 01
  4. SUBLEVEL =
  5. EXTRAVERSION = -rc1
  6. NAME =
  7. # *DOCUMENTATION*
  8. # To see a list of typical targets execute "make help"
  9. # More info can be located in ./README
  10. # Comments in this file are targeted only to the developer, do not
  11. # expect to learn how to build the kernel reading this file.
  12. # o Do not use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour);
  14. # o Look for make include files relative to root of kernel src
  15. MAKEFLAGS += -rR --include-dir=$(CURDIR)
  16. # Avoid funny character set dependencies
  17. unexport LC_ALL
  18. LC_COLLATE=C
  19. LC_NUMERIC=C
  20. export LC_COLLATE LC_NUMERIC
  21. # Avoid interference with shell env settings
  22. unexport GREP_OPTIONS
  23. # We are using a recursive build, so we need to do a little thinking
  24. # to get the ordering right.
  25. #
  26. # Most importantly: sub-Makefiles should only ever modify files in
  27. # their own directory. If in some directory we have a dependency on
  28. # a file in another dir (which doesn't happen often, but it's often
  29. # unavoidable when linking the built-in.o targets which finally
  30. # turn into vmlinux), we will call a sub make in that other dir, and
  31. # after that we are sure that everything which is in that other dir
  32. # is now up to date.
  33. #
  34. # The only cases where we need to modify files which have global
  35. # effects are thus separated out and done before the recursive
  36. # descending is started. They are now explicitly listed as the
  37. # prepare rule.
  38. # Beautify output
  39. # ---------------------------------------------------------------------------
  40. #
  41. # Normally, we echo the whole command before executing it. By making
  42. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  43. # $(quiet) to choose other forms of output instead, e.g.
  44. #
  45. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  46. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  47. #
  48. # If $(quiet) is empty, the whole command will be printed.
  49. # If it is set to "quiet_", only the short version will be printed.
  50. # If it is set to "silent_", nothing will be printed at all, since
  51. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  52. #
  53. # A simple variant is to prefix commands with $(Q) - that's useful
  54. # for commands that shall be hidden in non-verbose mode.
  55. #
  56. # $(Q)ln $@ :<
  57. #
  58. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  59. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  60. #
  61. # To put more focus on warnings, be less verbose as default
  62. # Use 'make V=1' to see the full commands
  63. ifeq ("$(origin V)", "command line")
  64. KBUILD_VERBOSE = $(V)
  65. endif
  66. ifndef KBUILD_VERBOSE
  67. KBUILD_VERBOSE = 0
  68. endif
  69. ifeq ($(KBUILD_VERBOSE),1)
  70. quiet =
  71. Q =
  72. else
  73. quiet=quiet_
  74. Q = @
  75. endif
  76. # If the user is running make -s (silent mode), suppress echoing of
  77. # commands
  78. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  79. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  80. quiet=silent_
  81. endif
  82. else # make-3.8x
  83. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  84. quiet=silent_
  85. endif
  86. endif
  87. export quiet Q KBUILD_VERBOSE
  88. # kbuild supports saving output files in a separate directory.
  89. # To locate output files in a separate directory two syntaxes are supported.
  90. # In both cases the working directory must be the root of the kernel src.
  91. # 1) O=
  92. # Use "make O=dir/to/store/output/files/"
  93. #
  94. # 2) Set KBUILD_OUTPUT
  95. # Set the environment variable KBUILD_OUTPUT to point to the directory
  96. # where the output files shall be placed.
  97. # export KBUILD_OUTPUT=dir/to/store/output/files/
  98. # make
  99. #
  100. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  101. # variable.
  102. # KBUILD_SRC is set on invocation of make in OBJ directory
  103. # KBUILD_SRC is not intended to be used by the regular user (for now)
  104. ifeq ($(KBUILD_SRC),)
  105. # OK, Make called in directory where kernel src resides
  106. # Do we want to locate output files in a separate directory?
  107. ifeq ("$(origin O)", "command line")
  108. KBUILD_OUTPUT := $(O)
  109. endif
  110. # That's our default target when none is given on the command line
  111. PHONY := _all
  112. _all:
  113. # Cancel implicit rules on top Makefile
  114. $(CURDIR)/Makefile Makefile: ;
  115. ifneq ($(KBUILD_OUTPUT),)
  116. # Invoke a second make in the output directory, passing relevant variables
  117. # check that the output directory actually exists
  118. saved-output := $(KBUILD_OUTPUT)
  119. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  120. && /bin/pwd)
  121. $(if $(KBUILD_OUTPUT),, \
  122. $(error failed to create output directory "$(saved-output)"))
  123. PHONY += $(MAKECMDGOALS) sub-make
  124. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  125. @:
  126. sub-make: FORCE
  127. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  128. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  129. # Leave processing to above invocation of make
  130. skip-makefile := 1
  131. endif # ifneq ($(KBUILD_OUTPUT),)
  132. endif # ifeq ($(KBUILD_SRC),)
  133. # We process the rest of the Makefile if this is the final invocation of make
  134. ifeq ($(skip-makefile),)
  135. # Do not print "Entering directory ...",
  136. # but we want to display it when entering to the output directory
  137. # so that IDEs/editors are able to understand relative filenames.
  138. MAKEFLAGS += --no-print-directory
  139. # Call a source code checker (by default, "sparse") as part of the
  140. # C compilation.
  141. #
  142. # Use 'make C=1' to enable checking of only re-compiled files.
  143. # Use 'make C=2' to enable checking of *all* source files, regardless
  144. # of whether they are re-compiled or not.
  145. #
  146. # See the file "doc/sparse.txt" for more details, including
  147. # where to get the "sparse" utility.
  148. ifeq ("$(origin C)", "command line")
  149. KBUILD_CHECKSRC = $(C)
  150. endif
  151. ifndef KBUILD_CHECKSRC
  152. KBUILD_CHECKSRC = 0
  153. endif
  154. # Use make M=dir to specify directory of external module to build
  155. # Old syntax make ... SUBDIRS=$PWD is still supported
  156. # Setting the environment variable KBUILD_EXTMOD take precedence
  157. ifdef SUBDIRS
  158. KBUILD_EXTMOD ?= $(SUBDIRS)
  159. endif
  160. ifeq ("$(origin M)", "command line")
  161. KBUILD_EXTMOD := $(M)
  162. endif
  163. # If building an external module we do not care about the all: rule
  164. # but instead _all depend on modules
  165. PHONY += all
  166. ifeq ($(KBUILD_EXTMOD),)
  167. _all: all
  168. else
  169. _all: modules
  170. endif
  171. ifeq ($(KBUILD_SRC),)
  172. # building in the source tree
  173. srctree := .
  174. else
  175. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  176. # building in a subdirectory of the source tree
  177. srctree := ..
  178. else
  179. srctree := $(KBUILD_SRC)
  180. endif
  181. endif
  182. objtree := .
  183. src := $(srctree)
  184. obj := $(objtree)
  185. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  186. export srctree objtree VPATH
  187. # Make sure CDPATH settings don't interfere
  188. unexport CDPATH
  189. #########################################################################
  190. HOSTARCH := $(shell uname -m | \
  191. sed -e s/i.86/x86/ \
  192. -e s/sun4u/sparc64/ \
  193. -e s/arm.*/arm/ \
  194. -e s/sa110/arm/ \
  195. -e s/ppc64/powerpc/ \
  196. -e s/ppc/powerpc/ \
  197. -e s/macppc/powerpc/\
  198. -e s/sh.*/sh/)
  199. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  200. sed -e 's/\(cygwin\).*/cygwin/')
  201. export HOSTARCH HOSTOS
  202. #########################################################################
  203. # set default to nothing for native builds
  204. ifeq ($(HOSTARCH),$(ARCH))
  205. CROSS_COMPILE ?=
  206. endif
  207. KCONFIG_CONFIG ?= .config
  208. export KCONFIG_CONFIG
  209. # SHELL used by kbuild
  210. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  211. else if [ -x /bin/bash ]; then echo /bin/bash; \
  212. else echo sh; fi ; fi)
  213. HOSTCC = cc
  214. HOSTCXX = c++
  215. HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
  216. $(if $(CONFIG_TOOLS_DEBUG),-g)
  217. HOSTCXXFLAGS = -O2
  218. # With the move to GCC 6, we have implicitly upgraded our language
  219. # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
  220. # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
  221. # have older compilers as their default, so we make it explicit for
  222. # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
  223. CSTD_FLAG := -std=gnu11
  224. ifeq ($(HOSTOS),linux)
  225. HOSTCFLAGS += $(CSTD_FLAG)
  226. endif
  227. ifeq ($(HOSTOS),cygwin)
  228. HOSTCFLAGS += -ansi
  229. endif
  230. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  231. # generates numerous errors and warnings. We want to bypass it
  232. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  233. # option to the compiler. Note that the -traditional-cpp flag
  234. # DOES NOT have the same semantics as GNU C's flag, all it does
  235. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  236. #
  237. # Apple's linker is similar, thanks to the new 2 stage linking
  238. # multiple symbol definitions are treated as errors, hence the
  239. # -multiply_defined suppress option to turn off this error.
  240. #
  241. ifeq ($(HOSTOS),darwin)
  242. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  243. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  244. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  245. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  246. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  247. os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
  248. $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  249. # Snow Leopards build environment has no longer restrictions as described above
  250. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  251. HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  252. HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  253. # since Lion (10.7) ASLR is on by default, but we use linker generated lists
  254. # in some host tools which is a problem then ... so disable ASLR for these
  255. # tools
  256. HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
  257. # macOS Mojave (10.14.X)
  258. # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
  259. HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
  260. endif
  261. # Decide whether to build built-in, modular, or both.
  262. # Normally, just do built-in.
  263. KBUILD_MODULES :=
  264. KBUILD_BUILTIN := 1
  265. # If we have only "make modules", don't compile built-in objects.
  266. # When we're building modules with modversions, we need to consider
  267. # the built-in objects during the descend as well, in order to
  268. # make sure the checksums are up to date before we record them.
  269. ifeq ($(MAKECMDGOALS),modules)
  270. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  271. endif
  272. # If we have "make <whatever> modules", compile modules
  273. # in addition to whatever we do anyway.
  274. # Just "make" or "make all" shall build modules as well
  275. # U-Boot does not need modules
  276. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  277. # KBUILD_MODULES := 1
  278. #endif
  279. #ifeq ($(MAKECMDGOALS),)
  280. # KBUILD_MODULES := 1
  281. #endif
  282. # Check ths size of a binary:
  283. # Args:
  284. # $1: File to check
  285. # #2: Size limit in bytes (decimal or 0xhex)
  286. define size_check
  287. actual=$$( wc -c $1 | awk '{print $$1}'); \
  288. limit=$$( printf "%d" $2 ); \
  289. if test $$actual -gt $$limit; then \
  290. echo "$1 exceeds file size limit:" >&2; \
  291. echo " limit: $$(printf %#x $$limit) bytes" >&2; \
  292. echo " actual: $$(printf %#x $$actual) bytes" >&2; \
  293. echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
  294. exit 1; \
  295. fi
  296. endef
  297. export size_check
  298. export KBUILD_MODULES KBUILD_BUILTIN
  299. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  300. # We need some generic definitions (do not try to remake the file).
  301. scripts/Kbuild.include: ;
  302. include scripts/Kbuild.include
  303. # Make variables (CC, etc...)
  304. AS = $(CROSS_COMPILE)as
  305. # Always use GNU ld
  306. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  307. LD = $(CROSS_COMPILE)ld.bfd
  308. else
  309. LD = $(CROSS_COMPILE)ld
  310. endif
  311. CC = $(CROSS_COMPILE)gcc
  312. CPP = $(CC) -E
  313. AR = $(CROSS_COMPILE)ar
  314. NM = $(CROSS_COMPILE)nm
  315. LDR = $(CROSS_COMPILE)ldr
  316. STRIP = $(CROSS_COMPILE)strip
  317. OBJCOPY = $(CROSS_COMPILE)objcopy
  318. OBJDUMP = $(CROSS_COMPILE)objdump
  319. LEX = flex
  320. YACC = bison
  321. AWK = awk
  322. PERL = perl
  323. PYTHON ?= python
  324. PYTHON2 = python2
  325. PYTHON3 = python3
  326. DTC ?= $(objtree)/scripts/dtc/dtc
  327. CHECK = sparse
  328. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  329. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  330. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  331. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  332. -Wno-format-security \
  333. -fno-builtin -ffreestanding $(CSTD_FLAG)
  334. KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
  335. KBUILD_AFLAGS := -D__ASSEMBLY__
  336. # Don't generate position independent code
  337. KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
  338. KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
  339. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  340. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  341. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  342. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  343. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  344. export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
  345. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
  346. export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
  347. export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
  348. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
  349. export KBUILD_CFLAGS KBUILD_AFLAGS
  350. # When compiling out-of-tree modules, put MODVERDIR in the module
  351. # tree rather than in the kernel tree. The kernel tree might
  352. # even be read-only.
  353. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  354. # Files to ignore in find ... statements
  355. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  356. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  357. -prune -o
  358. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  359. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  360. # ===========================================================================
  361. # Rules shared between *config targets and build targets
  362. # Basic helpers built in scripts/
  363. PHONY += scripts_basic
  364. scripts_basic:
  365. $(Q)$(MAKE) $(build)=scripts/basic
  366. $(Q)rm -f .tmp_quiet_recordmcount
  367. # To avoid any implicit rule to kick in, define an empty command.
  368. scripts/basic/%: scripts_basic ;
  369. PHONY += outputmakefile
  370. # outputmakefile generates a Makefile in the output directory, if using a
  371. # separate output directory. This allows convenient use of make in the
  372. # output directory.
  373. outputmakefile:
  374. ifneq ($(KBUILD_SRC),)
  375. $(Q)ln -fsn $(srctree) source
  376. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
  377. $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
  378. endif
  379. # To make sure we do not include .config for any of the *config targets
  380. # catch them early, and hand them over to scripts/kconfig/Makefile
  381. # It is allowed to specify more targets when calling make, including
  382. # mixing *config targets and build targets.
  383. # For example 'make oldconfig all'.
  384. # Detect when mixed targets is specified, and make a second invocation
  385. # of make so .config is not included in this case either (for *config).
  386. version_h := include/generated/version_autogenerated.h
  387. timestamp_h := include/generated/timestamp_autogenerated.h
  388. defaultenv_h := include/generated/defaultenv_autogenerated.h
  389. no-dot-config-targets := clean clobber mrproper distclean \
  390. help %docs check% coccicheck \
  391. ubootversion backup tests check qcheck
  392. config-targets := 0
  393. mixed-targets := 0
  394. dot-config := 1
  395. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  396. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  397. dot-config := 0
  398. endif
  399. endif
  400. ifeq ($(KBUILD_EXTMOD),)
  401. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  402. config-targets := 1
  403. ifneq ($(words $(MAKECMDGOALS)),1)
  404. mixed-targets := 1
  405. endif
  406. endif
  407. endif
  408. ifeq ($(mixed-targets),1)
  409. # ===========================================================================
  410. # We're called with mixed targets (*config and build targets).
  411. # Handle them one by one.
  412. PHONY += $(MAKECMDGOALS) __build_one_by_one
  413. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  414. @:
  415. __build_one_by_one:
  416. $(Q)set -e; \
  417. for i in $(MAKECMDGOALS); do \
  418. $(MAKE) -f $(srctree)/Makefile $$i; \
  419. done
  420. else
  421. ifeq ($(config-targets),1)
  422. # ===========================================================================
  423. # *config targets only - make sure prerequisites are updated, and descend
  424. # in scripts/kconfig to make the *config target
  425. KBUILD_DEFCONFIG := sandbox_defconfig
  426. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  427. config: scripts_basic outputmakefile FORCE
  428. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  429. %config: scripts_basic outputmakefile FORCE
  430. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  431. else
  432. # ===========================================================================
  433. # Build targets only - this includes vmlinux, arch specific targets, clean
  434. # targets and others. In general all targets except *config targets.
  435. # Additional helpers built in scripts/
  436. # Carefully list dependencies so we do not try to build scripts twice
  437. # in parallel
  438. PHONY += scripts
  439. scripts: scripts_basic include/config/auto.conf
  440. $(Q)$(MAKE) $(build)=$(@)
  441. ifeq ($(dot-config),1)
  442. # Read in config
  443. -include include/config/auto.conf
  444. # Read in dependencies to all Kconfig* files, make sure to run
  445. # oldconfig if changes are detected.
  446. -include include/config/auto.conf.cmd
  447. # To avoid any implicit rule to kick in, define an empty command
  448. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  449. # If .config is newer than include/config/auto.conf, someone tinkered
  450. # with it and forgot to run make oldconfig.
  451. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  452. # we execute the config step to be sure to catch updated Kconfig files
  453. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  454. $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
  455. @# If the following part fails, include/config/auto.conf should be
  456. @# deleted so "make silentoldconfig" will be re-run on the next build.
  457. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  458. { rm -f include/config/auto.conf; false; }
  459. @# include/config.h has been updated after "make silentoldconfig".
  460. @# We need to touch include/config/auto.conf so it gets newer
  461. @# than include/config.h.
  462. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  463. $(Q)touch include/config/auto.conf
  464. u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
  465. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
  466. -include include/autoconf.mk
  467. -include include/autoconf.mk.dep
  468. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  469. # is up-to-date. When we switch to a different board configuration, old CONFIG
  470. # macros are still remaining in include/config/auto.conf. Without the following
  471. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  472. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  473. ifneq ($(wildcard include/config/auto.conf),)
  474. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  475. include/config/auto.conf)
  476. ifeq ($(autoconf_is_old),)
  477. include config.mk
  478. include arch/$(ARCH)/Makefile
  479. endif
  480. endif
  481. endif
  482. # These are set by the arch-specific config.mk. Make sure they are exported
  483. # so they can be used when building an EFI application.
  484. export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
  485. export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
  486. export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
  487. export CFLAGS_EFI # Compiler flags to add when building EFI app
  488. export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
  489. export EFI_TARGET # binutils target if EFI is natively supported
  490. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  491. # that (or fail if absent). Otherwise, search for a linker script in a
  492. # standard location.
  493. ifndef LDSCRIPT
  494. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  495. ifdef CONFIG_SYS_LDSCRIPT
  496. # need to strip off double quotes
  497. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  498. endif
  499. endif
  500. # If there is no specified link script, we look in a number of places for it
  501. ifndef LDSCRIPT
  502. ifeq ($(wildcard $(LDSCRIPT)),)
  503. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  504. endif
  505. ifeq ($(wildcard $(LDSCRIPT)),)
  506. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  507. endif
  508. ifeq ($(wildcard $(LDSCRIPT)),)
  509. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  510. endif
  511. endif
  512. else
  513. # Dummy target needed, because used as prerequisite
  514. include/config/auto.conf: ;
  515. endif # $(dot-config)
  516. #
  517. # Xtensa linker script cannot be preprocessed with -ansi because of
  518. # preprocessor operations on strings that don't make C identifiers.
  519. #
  520. ifeq ($(CONFIG_XTENSA),)
  521. LDPPFLAGS += -ansi
  522. endif
  523. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  524. KBUILD_CFLAGS += -Os
  525. else
  526. KBUILD_CFLAGS += -O2
  527. endif
  528. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  529. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  530. # change __FILE__ to the relative path from the srctree
  531. KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
  532. KBUILD_CFLAGS += -g
  533. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  534. # option to the assembler.
  535. KBUILD_AFLAGS += -g
  536. # Report stack usage if supported
  537. # ARC tools based on GCC 7.1 has an issue with stack usage
  538. # with naked functions, see commit message for more details
  539. ifndef CONFIG_ARC
  540. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  541. KBUILD_CFLAGS += -fstack-usage
  542. endif
  543. endif
  544. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  545. ifeq ($(cc-name),clang)
  546. KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
  547. KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
  548. KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
  549. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  550. KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
  551. endif
  552. # turn jbsr into jsr for m68k
  553. ifeq ($(ARCH),m68k)
  554. ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
  555. KBUILD_AFLAGS += -Wa,-gstabs,-S
  556. endif
  557. endif
  558. # Prohibit date/time macros, which would make the build non-deterministic
  559. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  560. include scripts/Makefile.extrawarn
  561. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  562. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  563. KBUILD_AFLAGS += $(KAFLAGS)
  564. KBUILD_CFLAGS += $(KCFLAGS)
  565. # Use UBOOTINCLUDE when you must reference the include/ directory.
  566. # Needed to be compatible with the O= option
  567. UBOOTINCLUDE := \
  568. -Iinclude \
  569. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  570. $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
  571. $(if $(CONFIG_HAS_THUMB2),, \
  572. -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
  573. -I$(srctree)/arch/$(ARCH)/include \
  574. -include $(srctree)/include/linux/kconfig.h
  575. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  576. CHECKFLAGS += $(NOSTDINC_FLAGS)
  577. # FIX ME
  578. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  579. $(NOSTDINC_FLAGS)
  580. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  581. #########################################################################
  582. # U-Boot objects....order is important (i.e. start must be first)
  583. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  584. libs-y += lib/
  585. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  586. libs-$(CONFIG_OF_EMBED) += dts/
  587. libs-y += fs/
  588. libs-y += net/
  589. libs-y += disk/
  590. libs-y += drivers/
  591. libs-y += drivers/dma/
  592. libs-y += drivers/gpio/
  593. libs-y += drivers/i2c/
  594. libs-y += drivers/mtd/
  595. libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
  596. libs-y += drivers/mtd/onenand/
  597. libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
  598. libs-y += drivers/mtd/spi/
  599. libs-y += drivers/net/
  600. libs-y += drivers/net/phy/
  601. libs-y += drivers/power/ \
  602. drivers/power/domain/ \
  603. drivers/power/fuel_gauge/ \
  604. drivers/power/mfd/ \
  605. drivers/power/pmic/ \
  606. drivers/power/battery/ \
  607. drivers/power/regulator/
  608. libs-y += drivers/spi/
  609. libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
  610. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  611. libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
  612. libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
  613. libs-y += drivers/serial/
  614. libs-y += drivers/usb/dwc3/
  615. libs-y += drivers/usb/common/
  616. libs-y += drivers/usb/emul/
  617. libs-y += drivers/usb/eth/
  618. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
  619. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
  620. libs-y += drivers/usb/host/
  621. libs-y += drivers/usb/musb/
  622. libs-y += drivers/usb/musb-new/
  623. libs-y += drivers/usb/phy/
  624. libs-y += drivers/usb/ulpi/
  625. libs-y += cmd/
  626. libs-y += common/
  627. libs-y += env/
  628. libs-$(CONFIG_API) += api/
  629. libs-$(CONFIG_HAS_POST) += post/
  630. libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
  631. libs-$(CONFIG_UT_ENV) += test/env/
  632. libs-$(CONFIG_UT_OVERLAY) += test/overlay/
  633. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  634. libs-y := $(sort $(libs-y))
  635. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  636. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  637. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  638. u-boot-init := $(head-y)
  639. u-boot-main := $(libs-y)
  640. # Add GCC lib
  641. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  642. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  643. else
  644. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  645. endif
  646. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  647. ifdef CONFIG_CC_COVERAGE
  648. KBUILD_CFLAGS += --coverage
  649. PLATFORM_LIBGCC += -lgcov
  650. endif
  651. export PLATFORM_LIBS
  652. export PLATFORM_LIBGCC
  653. # Special flags for CPP when processing the linker script.
  654. # Pass the version down so we can handle backwards compatibility
  655. # on the fly.
  656. LDPPFLAGS += \
  657. -include $(srctree)/include/u-boot/u-boot.lds.h \
  658. -DCPUDIR=$(CPUDIR) \
  659. $(shell $(LD) --version | \
  660. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  661. #########################################################################
  662. #########################################################################
  663. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  664. BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
  665. else
  666. BOARD_SIZE_CHECK =
  667. endif
  668. ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
  669. SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
  670. else
  671. SPL_SIZE_CHECK =
  672. endif
  673. ifneq ($(CONFIG_TPL_SIZE_LIMIT),0)
  674. TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
  675. else
  676. TPL_SIZE_CHECK =
  677. endif
  678. # Statically apply RELA-style relocations (currently arm64 only)
  679. # This is useful for arm64 where static relocation needs to be performed on
  680. # the raw binary, but certain simulators only accept an ELF file (but don't
  681. # do the relocation).
  682. ifneq ($(CONFIG_STATIC_RELA),)
  683. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  684. DO_STATIC_RELA = \
  685. start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  686. end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  687. tools/relocate-rela $(2) $(3) $$start $$end
  688. else
  689. DO_STATIC_RELA =
  690. endif
  691. # Always append ALL so that arch config.mk's can add custom ones
  692. ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
  693. ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  694. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  695. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  696. else
  697. ifneq ($(CONFIG_SECURE_BOOT), y)
  698. # For Secure Boot The Image needs to be signed and Header must also
  699. # be included. So The image has to be built explicitly
  700. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  701. endif
  702. endif
  703. ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
  704. ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
  705. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  706. else
  707. ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
  708. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  709. else
  710. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  711. endif
  712. endif
  713. ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  714. ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  715. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  716. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  717. endif
  718. ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  719. ifneq ($(CONFIG_SPL_TARGET),)
  720. ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  721. endif
  722. ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
  723. ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
  724. ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  725. ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
  726. ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
  727. endif
  728. # Build a combined spl + u-boot image for sunxi
  729. ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
  730. ALL-y += u-boot-sunxi-with-spl.bin
  731. endif
  732. # enable combined SPL/u-boot/dtb rules for tegra
  733. ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
  734. ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
  735. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
  736. endif
  737. ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
  738. # Add optional build target if defined in board/cpu/soc headers
  739. ifneq ($(CONFIG_BUILD_TARGET),)
  740. ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
  741. endif
  742. ifdef CONFIG_INIT_SP_RELATIVE
  743. ALL-y += init_sp_bss_offset_check
  744. endif
  745. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  746. ALL-y += u-boot-with-dtb.bin
  747. endif
  748. ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
  749. ALL-y += idbloader.img
  750. endif
  751. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  752. # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
  753. LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
  754. ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
  755. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  756. endif
  757. # Normally we fill empty space with 0xff
  758. quiet_cmd_objcopy = OBJCOPY $@
  759. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  760. $(OBJCOPYFLAGS_$(@F)) $< $@
  761. # Provide a version which does not do this, for use by EFI
  762. quiet_cmd_zobjcopy = OBJCOPY $@
  763. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  764. quiet_cmd_efipayload = OBJCOPY $@
  765. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  766. MKIMAGEOUTPUT ?= /dev/null
  767. quiet_cmd_mkimage = MKIMAGE $@
  768. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  769. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  770. quiet_cmd_mkfitimage = MKIMAGE $@
  771. cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
  772. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  773. quiet_cmd_cat = CAT $@
  774. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  775. append = cat $(filter-out $< $(PHONY), $^) >> $@
  776. quiet_cmd_pad_cat = CAT $@
  777. cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
  778. cfg: u-boot.cfg
  779. quiet_cmd_cfgcheck = CFGCHK $2
  780. cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
  781. $(srctree)/scripts/config_whitelist.txt $(srctree)
  782. all: $(ALL-y)
  783. ifeq ($(CONFIG_DEPRECATED),y)
  784. $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
  785. ifeq ($(CONFIG_SPI),y)
  786. ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
  787. $(warning "The relevant config item with associated code will remove in v2019.07 release.")
  788. endif
  789. endif
  790. endif
  791. ifneq ($(CONFIG_DM),y)
  792. @echo >&2 "===================== WARNING ======================"
  793. @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
  794. @echo >&2 "compulsory starting with the v2020.01 release."
  795. @echo >&2 "Failure to update may result in board removal."
  796. @echo >&2 "See doc/driver-model/migration.rst for more info."
  797. @echo >&2 "===================================================="
  798. endif
  799. ifeq ($(CONFIG_MMC),y)
  800. ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
  801. @echo >&2 "===================== WARNING ======================"
  802. @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
  803. @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
  804. @echo >&2 "Failure to update by the deadline may result in board removal."
  805. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  806. @echo >&2 "===================================================="
  807. endif
  808. endif
  809. ifeq ($(CONFIG_USB),y)
  810. ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
  811. @echo >&2 "===================== WARNING ======================"
  812. @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
  813. @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
  814. @echo >&2 "Failure to update by the deadline may result in board removal."
  815. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  816. @echo >&2 "===================================================="
  817. endif
  818. endif
  819. ifeq ($(CONFIG_MVSATA_IDE),y)
  820. @echo >&2 "===================== WARNING ======================"
  821. @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
  822. @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
  823. @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
  824. @echo >&2 "release."
  825. @echo >&2 "Failure to update by the deadline may result in board removal."
  826. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  827. @echo >&2 "===================================================="
  828. endif
  829. ifeq ($(CONFIG_LIBATA),y)
  830. ifneq ($(CONFIG_AHCI),y)
  831. @echo >&2 "===================== WARNING ======================"
  832. @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
  833. @echo >&2 "enabled. Please update the storage controller driver to use"
  834. @echo >&2 "CONFIG_AHCI before the v2019.07 release."
  835. @echo >&2 "Failure to update by the deadline may result in board removal."
  836. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  837. @echo >&2 "===================================================="
  838. endif
  839. endif
  840. ifeq ($(CONFIG_PCI),y)
  841. ifneq ($(CONFIG_DM_PCI),y)
  842. @echo >&2 "===================== WARNING ======================"
  843. @echo >&2 "This board does not use CONFIG_DM_PCI Please update"
  844. @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
  845. @echo >&2 "Failure to update by the deadline may result in board removal."
  846. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  847. @echo >&2 "===================================================="
  848. endif
  849. endif
  850. ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
  851. ifneq ($(CONFIG_DM_VIDEO),y)
  852. @echo >&2 "===================== WARNING ======================"
  853. @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
  854. @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
  855. @echo >&2 "Failure to update by the deadline may result in board removal."
  856. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  857. @echo >&2 "===================================================="
  858. endif
  859. endif
  860. ifeq ($(CONFIG_OF_EMBED),y)
  861. @echo >&2 "===================== WARNING ======================"
  862. @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
  863. @echo >&2 "be used for debugging purposes. Please use"
  864. @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
  865. @echo >&2 "See doc/README.fdt-control for more info."
  866. @echo >&2 "===================================================="
  867. endif
  868. ifeq ($(CONFIG_SPI_FLASH),y)
  869. ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
  870. @echo >&2 "===================== WARNING ======================"
  871. @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
  872. @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
  873. @echo >&2 "Failure to update by the deadline may result in board removal."
  874. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  875. @echo >&2 "===================================================="
  876. endif
  877. endif
  878. ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
  879. ifneq ($(CONFIG_WDT),y)
  880. @echo >&2 "===================== WARNING ======================"
  881. @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
  882. @echo >&2 "Please update the board to use CONFIG_WDT before the"
  883. @echo >&2 "v2019.10 release."
  884. @echo >&2 "Failure to update by the deadline may result in board removal."
  885. @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
  886. @echo >&2 "===================================================="
  887. endif
  888. endif
  889. ifneq ($(CONFIG_NET),)
  890. ifneq ($(CONFIG_DM_ETH),y)
  891. @echo >&2 "===================== WARNING ======================"
  892. @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
  893. @echo >&2 "for Ethernet drivers). Please update the board to use"
  894. @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
  895. @echo >&2 "update by the deadline may result in board removal."
  896. @echo >&2 "See doc/driver-model/migration.rst for more info."
  897. @echo >&2 "===================================================="
  898. endif
  899. endif
  900. @# Check that this build does not use CONFIG options that we do not
  901. @# know about unless they are in Kconfig. All the existing CONFIG
  902. @# options are whitelisted, so new ones should not be added.
  903. $(call cmd,cfgcheck,u-boot.cfg)
  904. PHONY += dtbs
  905. dtbs: dts/dt.dtb
  906. @:
  907. dts/dt.dtb: u-boot
  908. $(Q)$(MAKE) $(build)=dts dtbs
  909. quiet_cmd_copy = COPY $@
  910. cmd_copy = cp $< $@
  911. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  912. ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
  913. FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
  914. else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
  915. FINAL_DTB_CONTAINER = fit-dtb.blob.gz
  916. else
  917. FINAL_DTB_CONTAINER = fit-dtb.blob
  918. endif
  919. fit-dtb.blob.gz: fit-dtb.blob
  920. @gzip -kf9 $< > $@
  921. fit-dtb.blob.lzo: fit-dtb.blob
  922. @lzop -f9 $< > $@
  923. fit-dtb.blob: dts/dt.dtb FORCE
  924. $(call if_changed,mkimage)
  925. ifneq ($(SOURCE_DATE_EPOCH),)
  926. touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
  927. chmod 0600 fit-dtb.blob
  928. endif
  929. MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  930. -a 0 -e 0 -E \
  931. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
  932. ifneq ($(EXT_DTB),)
  933. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
  934. $(call if_changed,cat)
  935. else
  936. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
  937. $(call if_changed,cat)
  938. endif
  939. u-boot.bin: u-boot-fit-dtb.bin FORCE
  940. $(call if_changed,copy)
  941. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  942. $(call if_changed,cat)
  943. else ifeq ($(CONFIG_OF_SEPARATE),y)
  944. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  945. $(call if_changed,cat)
  946. u-boot.bin: u-boot-dtb.bin FORCE
  947. $(call if_changed,copy)
  948. else
  949. u-boot.bin: u-boot-nodtb.bin FORCE
  950. $(call if_changed,copy)
  951. endif
  952. %.imx: %.bin
  953. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  954. $(BOARD_SIZE_CHECK)
  955. %.vyb: %.imx
  956. $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
  957. quiet_cmd_copy = COPY $@
  958. cmd_copy = cp $< $@
  959. u-boot.dtb: dts/dt.dtb
  960. $(call cmd,copy)
  961. OBJCOPYFLAGS_u-boot.hex := -O ihex
  962. OBJCOPYFLAGS_u-boot.srec := -O srec
  963. u-boot.hex u-boot.srec: u-boot FORCE
  964. $(call if_changed,objcopy)
  965. OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
  966. u-boot-elf.srec: u-boot.elf FORCE
  967. $(call if_changed,objcopy)
  968. OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
  969. spl/u-boot-spl.srec: spl/u-boot-spl FORCE
  970. $(call if_changed,objcopy)
  971. %.scif: %.srec
  972. $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
  973. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  974. $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
  975. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
  976. OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
  977. spl/u-boot-spl.hex: spl/u-boot-spl FORCE
  978. $(call if_changed,objcopy)
  979. binary_size_check: u-boot-nodtb.bin FORCE
  980. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  981. map_size=$(shell cat u-boot.map | \
  982. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  983. | sed 's/0X//g' \
  984. | bc); \
  985. if [ "" != "$$map_size" ]; then \
  986. if test $$map_size -ne $$file_size; then \
  987. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  988. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  989. exit 1; \
  990. fi \
  991. fi
  992. ifdef CONFIG_INIT_SP_RELATIVE
  993. ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
  994. subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
  995. else
  996. subtract_sys_malloc_f_len = true
  997. endif
  998. # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
  999. # so low that the DTB could probably use 90%+ of the available space, for
  1000. # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
  1001. # safe for now and tweak this later if space becomes tight.
  1002. # A rejected alternative would be to check that some absolute minimum stack
  1003. # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
  1004. # deliberately build-specific, to take account of build-to-build stack usage
  1005. # differences due to different feature sets, there is no common absolute value
  1006. # to check against.
  1007. init_sp_bss_offset_check: u-boot.dtb FORCE
  1008. @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
  1009. space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
  1010. $(subtract_sys_malloc_f_len) ; \
  1011. quarter_space=$$(($${space} / 4)) ; \
  1012. if [ $${dtb_size} -gt $${quarter_space} ]; then \
  1013. echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
  1014. echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
  1015. exit 1 ; \
  1016. fi
  1017. endif
  1018. u-boot-nodtb.bin: u-boot FORCE
  1019. $(call if_changed,objcopy)
  1020. $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
  1021. $(BOARD_SIZE_CHECK)
  1022. u-boot.ldr: u-boot
  1023. $(CREATE_LDR_ENV)
  1024. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  1025. $(BOARD_SIZE_CHECK)
  1026. # binman
  1027. # ---------------------------------------------------------------------------
  1028. # Use 'make BINMAN_DEBUG=1' to enable debugging
  1029. quiet_cmd_binman = BINMAN $@
  1030. cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
  1031. --toolpath $(objtree)/tools \
  1032. $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
  1033. build -u -d u-boot.dtb -O . -m \
  1034. -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
  1035. $(BINMAN_$(@F))
  1036. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  1037. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  1038. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  1039. $(call if_changed,objcopy)
  1040. #
  1041. # U-Boot entry point, needed for booting of full-blown U-Boot
  1042. # from the SPL U-Boot version.
  1043. #
  1044. ifndef CONFIG_SYS_UBOOT_START
  1045. CONFIG_SYS_UBOOT_START := 0
  1046. endif
  1047. # Boards with more complex image requirements can provide an .its source file
  1048. # or a generator script
  1049. ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
  1050. U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
  1051. else
  1052. ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
  1053. U_BOOT_ITS := u-boot.its
  1054. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
  1055. U_BOOT_ITS_DEPS += u-boot-nodtb.bin
  1056. endif
  1057. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
  1058. U_BOOT_ITS_DEPS += u-boot
  1059. endif
  1060. $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
  1061. $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
  1062. $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
  1063. endif
  1064. endif
  1065. ifdef CONFIG_SPL_LOAD_FIT
  1066. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1067. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1068. -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
  1069. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  1070. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
  1071. else
  1072. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  1073. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1074. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1075. MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
  1076. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1077. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1078. u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
  1079. CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
  1080. endif
  1081. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  1082. # Some boards have the kwbimage.cfg file written in advance, while some
  1083. # other boards generate it on the fly during the build in the build tree.
  1084. # Let's check if the file exists in the build tree first, otherwise we
  1085. # fall back to use the one in the source tree.
  1086. KWD_CONFIG_FILE = $(shell \
  1087. if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
  1088. echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1089. else \
  1090. echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1091. fi)
  1092. MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
  1093. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  1094. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
  1095. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1096. $(if $(KEYDIR),-k $(KEYDIR))
  1097. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1098. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  1099. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1100. UBOOT_BIN := u-boot-with-dtb.bin
  1101. else
  1102. UBOOT_BIN := u-boot.bin
  1103. endif
  1104. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
  1105. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
  1106. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1107. ,$(UBOOT_BIN)) FORCE
  1108. $(call if_changed,mkimage)
  1109. $(BOARD_SIZE_CHECK)
  1110. ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
  1111. MKIMAGEFLAGS_u-boot.itb =
  1112. else
  1113. MKIMAGEFLAGS_u-boot.itb = -E
  1114. endif
  1115. u-boot.itb: u-boot-nodtb.bin \
  1116. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1117. $(U_BOOT_ITS) FORCE
  1118. $(call if_changed,mkfitimage)
  1119. $(BOARD_SIZE_CHECK)
  1120. u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
  1121. $(call if_changed,mkimage)
  1122. u-boot.sha1: u-boot.bin
  1123. tools/ubsha1 u-boot.bin
  1124. u-boot.dis: u-boot
  1125. $(OBJDUMP) -d $< > $@
  1126. ifneq ($(CONFIG_SPL_PAYLOAD),)
  1127. SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
  1128. else
  1129. SPL_PAYLOAD := u-boot.bin
  1130. endif
  1131. SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
  1132. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  1133. --pad-to=$(CONFIG_SPL_PAD_TO)
  1134. u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
  1135. $(call if_changed,pad_cat)
  1136. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  1137. MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd
  1138. tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
  1139. $(call if_changed,mkimage)
  1140. idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
  1141. $(call if_changed,cat)
  1142. endif
  1143. ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
  1144. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  1145. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  1146. $(call if_changed,mkimage)
  1147. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1148. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  1149. $(call if_changed,objcopy)
  1150. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1151. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  1152. $(call if_changed,objcopy)
  1153. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  1154. $(call if_changed,cat)
  1155. CLEAN_FILES += lpc32xx-*
  1156. endif
  1157. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  1158. --pad-to=$(CONFIG_TPL_PAD_TO)
  1159. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  1160. $(call if_changed,pad_cat)
  1161. SPL: spl/u-boot-spl.bin FORCE
  1162. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1163. ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
  1164. ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
  1165. u-boot.cnt: u-boot.bin FORCE
  1166. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1167. flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
  1168. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1169. else
  1170. flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
  1171. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1172. endif
  1173. endif
  1174. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
  1175. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1176. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  1177. u-boot.ubl: u-boot-with-spl.bin FORCE
  1178. $(call if_changed,mkimage)
  1179. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  1180. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  1181. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  1182. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  1183. $(call if_changed,mkimage)
  1184. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1185. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  1186. $(call if_changed,pad_cat)
  1187. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  1188. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  1189. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  1190. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  1191. # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
  1192. # Both images are created using mkimage (crc etc), so that the ROM
  1193. # bootloader can check its integrity. Padding needs to be done to the
  1194. # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
  1195. # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
  1196. # The resulting image containing both U-Boot images is called u-boot.spr
  1197. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  1198. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  1199. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  1200. $(call if_changed,mkimage)
  1201. OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1202. --gap-fill=0xff
  1203. u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
  1204. $(call if_changed,pad_cat)
  1205. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  1206. quiet_cmd_socboot = SOCBOOT $@
  1207. cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1208. spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1209. u-boot.img > $@ || rm -f $@
  1210. u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
  1211. $(call if_changed,socboot)
  1212. endif
  1213. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1214. u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
  1215. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
  1216. $(call if_changed,binman)
  1217. ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
  1218. OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
  1219. u-boot-br.bin: u-boot FORCE
  1220. $(call if_changed,objcopy)
  1221. endif
  1222. endif
  1223. # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
  1224. # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
  1225. # the middle. This is handled by binman based on an image description in the
  1226. # board's device tree.
  1227. ifneq ($(CONFIG_X86_RESET_VECTOR),)
  1228. rom: u-boot.rom FORCE
  1229. refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
  1230. $(call if_changed,copy)
  1231. quiet_cmd_ldr = LD $@
  1232. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  1233. $(filter-out FORCE,$^) -o $@
  1234. u-boot.rom: u-boot-x86-start16.bin u-boot-x86-reset16.bin u-boot.bin \
  1235. $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
  1236. $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
  1237. $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
  1238. $(call if_changed,binman)
  1239. OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
  1240. u-boot-x86-start16.bin: u-boot FORCE
  1241. $(call if_changed,objcopy)
  1242. OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
  1243. u-boot-x86-reset16.bin: u-boot FORCE
  1244. $(call if_changed,objcopy)
  1245. endif
  1246. ifneq ($(CONFIG_ARCH_SUNXI),)
  1247. ifeq ($(CONFIG_ARM64),)
  1248. u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
  1249. $(call if_changed,binman)
  1250. else
  1251. u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
  1252. $(call if_changed,cat)
  1253. endif
  1254. endif
  1255. ifneq ($(CONFIG_TEGRA),)
  1256. ifneq ($(CONFIG_BINMAN),)
  1257. # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
  1258. %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
  1259. spl/%-spl %.bin FORCE
  1260. $(call if_changed,binman)
  1261. else
  1262. OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  1263. u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
  1264. $(call if_changed,pad_cat)
  1265. OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  1266. u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
  1267. $(call if_changed,pad_cat)
  1268. u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
  1269. $(call if_changed,copy)
  1270. endif # binman
  1271. endif
  1272. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  1273. u-boot-app.efi: u-boot FORCE
  1274. $(call if_changed,zobjcopy)
  1275. u-boot.bin.o: u-boot.bin FORCE
  1276. $(call if_changed,efipayload)
  1277. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  1278. $(call if_changed_dep,cpp_lds)
  1279. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  1280. quiet_cmd_u-boot_payload ?= LD $@
  1281. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  1282. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  1283. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  1284. $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
  1285. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  1286. $(call if_changed,u-boot_payload)
  1287. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  1288. u-boot-payload.efi: u-boot-payload FORCE
  1289. $(call if_changed,zobjcopy)
  1290. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  1291. $(call if_changed,cat)
  1292. #Add a target to create boot binary having SPL binary in PBI format
  1293. #concatenated with u-boot binary. It is need by PowerPC SoC having
  1294. #internal SRAM <= 512KB.
  1295. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1296. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  1297. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  1298. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  1299. $(call if_changed,mkimage)
  1300. ifeq ($(ARCH),arm)
  1301. UBOOT_BINLOAD := u-boot.img
  1302. else
  1303. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1304. UBOOT_BINLOAD := u-boot-with-dtb.bin
  1305. else
  1306. UBOOT_BINLOAD := u-boot.bin
  1307. endif
  1308. endif
  1309. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1310. --gap-fill=0xff
  1311. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  1312. $(call if_changed,pad_cat)
  1313. # PPC4xx needs the SPL at the end of the image, since the reset vector
  1314. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  1315. # and need to introduce a new build target with the full blown U-Boot
  1316. # at the start padded up to the start of the SPL image. And then concat
  1317. # the SPL image to the end.
  1318. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  1319. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  1320. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  1321. $(call if_changed,pad_cat)
  1322. # Create a new ELF from a raw binary file.
  1323. ifndef PLATFORM_ELFENTRY
  1324. PLATFORM_ELFENTRY = "_start"
  1325. endif
  1326. quiet_cmd_u-boot-elf ?= LD $@
  1327. cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
  1328. --defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
  1329. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  1330. u-boot.elf: u-boot.bin
  1331. $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
  1332. $(call if_changed,u-boot-elf)
  1333. # MediaTek's ARM-based u-boot needs a header to contains its load address
  1334. # which is parsed by the BootROM.
  1335. # If the SPL build is enabled, the header will be added to the spl binary,
  1336. # and the spl binary and the u-boot.img will be combined into one file.
  1337. # Otherwise the header will be added to the u-boot.bin directly.
  1338. ifeq ($(CONFIG_SPL),y)
  1339. spl/u-boot-spl-mtk.bin: spl/u-boot-spl
  1340. u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
  1341. $(call if_changed,binman)
  1342. else
  1343. MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
  1344. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1345. -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
  1346. u-boot-mtk.bin: u-boot.bin FORCE
  1347. $(call if_changed,mkimage)
  1348. endif
  1349. ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
  1350. # Rule to link u-boot
  1351. # May be overridden by arch/$(ARCH)/config.mk
  1352. quiet_cmd_u-boot__ ?= LD $@
  1353. cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  1354. -T u-boot.lds $(u-boot-init) \
  1355. --start-group $(u-boot-main) --end-group \
  1356. $(PLATFORM_LIBS) -Map u-boot.map; \
  1357. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1358. quiet_cmd_smap = GEN common/system_map.o
  1359. cmd_smap = \
  1360. smap=`$(call SYSTEM_MAP,u-boot) | \
  1361. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  1362. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  1363. -c $(srctree)/common/system_map.c -o common/system_map.o
  1364. u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
  1365. +$(call if_changed,u-boot__)
  1366. ifeq ($(CONFIG_KALLSYMS),y)
  1367. $(call cmd,smap)
  1368. $(call cmd,u-boot__) common/system_map.o
  1369. endif
  1370. ifeq ($(CONFIG_RISCV),y)
  1371. @tools/prelink-riscv $@ 0
  1372. endif
  1373. quiet_cmd_sym ?= SYM $@
  1374. cmd_sym ?= $(OBJDUMP) -t $< > $@
  1375. u-boot.sym: u-boot FORCE
  1376. $(call if_changed,sym)
  1377. # The actual objects are generated when descending,
  1378. # make sure no implicit rule kicks in
  1379. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  1380. # Handle descending into subdirectories listed in $(vmlinux-dirs)
  1381. # Preset locale variables to speed up the build process. Limit locale
  1382. # tweaks to this spot to avoid wrong language settings when running
  1383. # make menuconfig etc.
  1384. # Error messages still appears in the original language
  1385. PHONY += $(u-boot-dirs)
  1386. $(u-boot-dirs): prepare scripts
  1387. $(Q)$(MAKE) $(build)=$@
  1388. tools: prepare
  1389. # The "tools" are needed early
  1390. $(filter-out tools, $(u-boot-dirs)): tools
  1391. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  1392. # is "yes"), so compile examples after U-Boot is compiled.
  1393. examples: $(filter-out examples, $(u-boot-dirs))
  1394. define filechk_uboot.release
  1395. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1396. endef
  1397. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  1398. include/config/uboot.release: include/config/auto.conf FORCE
  1399. $(call filechk,uboot.release)
  1400. # Things we need to do before we recursively start building the kernel
  1401. # or the modules are listed in "prepare".
  1402. # A multi level approach is used. prepareN is processed before prepareN-1.
  1403. # archprepare is used in arch Makefiles and when processed asm symlink,
  1404. # version.h and scripts_basic is processed / created.
  1405. # Listed in dependency order
  1406. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1407. # prepare3 is used to check if we are building in a separate output directory,
  1408. # and if so do:
  1409. # 1) Check that make has not been executed in the kernel src $(srctree)
  1410. prepare3: include/config/uboot.release
  1411. ifneq ($(KBUILD_SRC),)
  1412. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1413. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1414. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1415. echo >&2 " in the '$(srctree)' directory.";\
  1416. /bin/false; \
  1417. fi;
  1418. endif
  1419. # prepare2 creates a makefile if using a separate output directory
  1420. prepare2: prepare3 outputmakefile cfg
  1421. prepare1: prepare2 $(version_h) $(timestamp_h) \
  1422. include/config/auto.conf
  1423. ifeq ($(wildcard $(LDSCRIPT)),)
  1424. @echo >&2 " Could not find linker script."
  1425. @/bin/false
  1426. endif
  1427. ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
  1428. prepare1: $(defaultenv_h)
  1429. endif
  1430. archprepare: prepare1 scripts_basic
  1431. prepare0: archprepare FORCE
  1432. $(Q)$(MAKE) $(build)=.
  1433. # All the preparing..
  1434. prepare: prepare0
  1435. # Generate some files
  1436. # ---------------------------------------------------------------------------
  1437. define filechk_version.h
  1438. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1439. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1440. echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
  1441. echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
  1442. endef
  1443. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1444. # The BSD date on the other hand behaves different and would produce errors
  1445. # with the misused '-d' switch. Respect that and search a working date with
  1446. # well known pre- and suffixes for the GNU variant of date.
  1447. define filechk_timestamp.h
  1448. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1449. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1450. DATE=""; \
  1451. for date in gdate date.gnu date; do \
  1452. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1453. done; \
  1454. if test -n "$${DATE}"; then \
  1455. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1456. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1457. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1458. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1459. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1460. else \
  1461. return 42; \
  1462. fi; \
  1463. else \
  1464. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1465. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1466. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1467. LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1468. LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1469. fi)
  1470. endef
  1471. define filechk_defaultenv.h
  1472. (grep -v '^#' | \
  1473. grep -v '^$$' | \
  1474. tr '\n' '\0' | \
  1475. sed -e 's/\\\x0/\n/g' | \
  1476. xxd -i ; echo ", 0x00" ; )
  1477. endef
  1478. $(version_h): include/config/uboot.release FORCE
  1479. $(call filechk,version.h)
  1480. $(timestamp_h): $(srctree)/Makefile FORCE
  1481. $(call filechk,timestamp.h)
  1482. $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
  1483. $(call filechk,defaultenv.h)
  1484. # ---------------------------------------------------------------------------
  1485. quiet_cmd_cpp_lds = LDS $@
  1486. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
  1487. -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
  1488. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1489. $(call if_changed_dep,cpp_lds)
  1490. spl/u-boot-spl.bin: spl/u-boot-spl
  1491. @:
  1492. $(SPL_SIZE_CHECK)
  1493. spl/u-boot-spl: tools prepare \
  1494. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
  1495. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
  1496. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1497. spl/sunxi-spl.bin: spl/u-boot-spl
  1498. @:
  1499. spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
  1500. @:
  1501. spl/u-boot-spl.sfp: spl/u-boot-spl
  1502. @:
  1503. spl/boot.bin: spl/u-boot-spl
  1504. @:
  1505. tpl/u-boot-tpl.bin: tools prepare \
  1506. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
  1507. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1508. $(TPL_SIZE_CHECK)
  1509. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1510. FIND := find
  1511. FINDFLAGS := -L
  1512. tags ctags:
  1513. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1514. -name '*.[chS]' -print`
  1515. ln -s ctags tags
  1516. etags:
  1517. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1518. -name '*.[chS]' -print`
  1519. cscope:
  1520. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1521. cscope.files
  1522. @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
  1523. grep -xvf - cscope.files > cscope.files.no-symlinks; \
  1524. mv cscope.files.no-symlinks cscope.files
  1525. cscope -b -q -k
  1526. SYSTEM_MAP = \
  1527. $(NM) $1 | \
  1528. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1529. LC_ALL=C sort
  1530. System.map: u-boot
  1531. @$(call SYSTEM_MAP,$<) > $@
  1532. #########################################################################
  1533. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1534. # R_AARCH64_RELATIVE (64-bit).
  1535. checkarmreloc: u-boot
  1536. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1537. grep R_A | sort -u`"; \
  1538. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1539. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1540. echo "$< contains unexpected relocations: $$RELOC"; \
  1541. false; \
  1542. fi
  1543. tools/version.h: include/version.h
  1544. $(call if_changed,copy)
  1545. envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1546. $(Q)$(MAKE) $(build)=tools/env
  1547. tools-only: export TOOLS_ONLY=y
  1548. tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1549. $(Q)$(MAKE) $(build)=tools
  1550. tools-all: export HOST_TOOLS_ALL=y
  1551. tools-all: envtools tools ;
  1552. cross_tools: export CROSS_BUILD_TOOLS=y
  1553. cross_tools: tools ;
  1554. .PHONY : CHANGELOG
  1555. CHANGELOG:
  1556. git log --no-merges U-Boot-1_1_5.. | \
  1557. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1558. #########################################################################
  1559. ###
  1560. # Cleaning is done on three levels.
  1561. # make clean Delete most generated files
  1562. # Leave enough to build external modules
  1563. # make mrproper Delete the current configuration, and all generated files
  1564. # make distclean Remove editor backup files, patch leftover files and the like
  1565. # Directories & files removed with 'make clean'
  1566. CLEAN_DIRS += $(MODVERDIR) \
  1567. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1568. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1569. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
  1570. boot* u-boot* MLO* SPL System.map fit-dtb.blob*
  1571. # Directories & files removed with 'make mrproper'
  1572. MRPROPER_DIRS += include/config include/generated spl tpl \
  1573. .tmp_objdiff
  1574. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1575. ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
  1576. drivers/video/fonts/*.S
  1577. # clean - Delete most, but leave enough to build external modules
  1578. #
  1579. clean: rm-dirs := $(CLEAN_DIRS)
  1580. clean: rm-files := $(CLEAN_FILES)
  1581. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1582. clean-dirs := $(addprefix _clean_, $(clean-dirs))
  1583. PHONY += $(clean-dirs) clean archclean
  1584. $(clean-dirs):
  1585. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1586. clean: $(clean-dirs)
  1587. $(call cmd,rmdirs)
  1588. $(call cmd,rmfiles)
  1589. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1590. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1591. -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
  1592. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1593. -o -name '*.lex.c' -o -name '*.tab.[ch]' \
  1594. -o -name '*.symtypes' -o -name 'modules.order' \
  1595. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1596. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1597. -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
  1598. -type f -print | xargs rm -f \
  1599. bl31.c bl31.elf bl31_*.bin image.map tispl.bin*
  1600. # mrproper - Delete all generated files, including .config
  1601. #
  1602. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1603. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1604. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1605. PHONY += $(mrproper-dirs) mrproper archmrproper
  1606. $(mrproper-dirs):
  1607. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1608. mrproper: clean $(mrproper-dirs)
  1609. $(call cmd,rmdirs)
  1610. $(call cmd,rmfiles)
  1611. @rm -f arch/*/include/asm/arch
  1612. # distclean
  1613. #
  1614. PHONY += distclean
  1615. distclean: mrproper
  1616. @find $(srctree) $(RCS_FIND_IGNORE) \
  1617. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1618. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1619. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1620. -o -name '*.pyc' \) \
  1621. -type f -print | xargs rm -f
  1622. @rm -f boards.cfg CHANGELOG
  1623. backup:
  1624. F=`basename $(srctree)` ; cd .. ; \
  1625. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1626. help:
  1627. @echo 'Cleaning targets:'
  1628. @echo ' clean - Remove most generated files but keep the config'
  1629. @echo ' mrproper - Remove all generated files + config + various backup files'
  1630. @echo ' distclean - mrproper + remove editor backup and patch files'
  1631. @echo ''
  1632. @echo 'Configuration targets:'
  1633. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1634. @echo ''
  1635. @echo 'Test targets:'
  1636. @echo ''
  1637. @echo ' check - Run all automated tests that use sandbox'
  1638. @echo ' qcheck - Run quick automated tests that use sandbox'
  1639. @echo ''
  1640. @echo 'Other generic targets:'
  1641. @echo ' all - Build all necessary images depending on configuration'
  1642. @echo ' tests - Build U-Boot for sandbox and run tests'
  1643. @echo '* u-boot - Build the bare u-boot'
  1644. @echo ' dir/ - Build all files in dir and below'
  1645. @echo ' dir/file.[oisS] - Build specified target only'
  1646. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1647. @echo ' (requires a recent binutils and recent build (System.map))'
  1648. @echo ' tags/ctags - Generate ctags file for editors'
  1649. @echo ' etags - Generate etags file for editors'
  1650. @echo ' cscope - Generate cscope index'
  1651. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1652. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1653. @echo " cfg - Don't build, just create the .cfg files"
  1654. @echo " envtools - Build only the target-side environment tools"
  1655. @echo ''
  1656. @echo 'Static analysers'
  1657. @echo ' checkstack - Generate a list of stack hogs'
  1658. @echo ' coccicheck - Execute static code analysis with Coccinelle'
  1659. @echo ''
  1660. @echo 'Documentation targets:'
  1661. @$(MAKE) -f $(srctree)/doc/Makefile dochelp
  1662. @echo ''
  1663. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1664. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1665. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1666. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1667. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1668. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1669. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1670. @echo ' 1: warnings which may be relevant and do not occur too often'
  1671. @echo ' 2: warnings which occur quite often but may still be relevant'
  1672. @echo ' 3: more obscure warnings, can most likely be ignored'
  1673. @echo ' Multiple levels can be combined with W=12 or W=123'
  1674. @echo ''
  1675. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1676. @echo 'For further info see the ./README file'
  1677. tests check:
  1678. $(srctree)/test/run
  1679. qcheck:
  1680. $(srctree)/test/run quick
  1681. # Documentation targets
  1682. # ---------------------------------------------------------------------------
  1683. DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
  1684. linkcheckdocs dochelp refcheckdocs
  1685. PHONY += $(DOC_TARGETS)
  1686. $(DOC_TARGETS): scripts_basic FORCE
  1687. $(Q)$(MAKE) $(build)=doc $@
  1688. endif #ifeq ($(config-targets),1)
  1689. endif #ifeq ($(mixed-targets),1)
  1690. PHONY += checkstack ubootrelease ubootversion
  1691. checkstack:
  1692. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1693. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1694. ubootrelease:
  1695. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1696. ubootversion:
  1697. @echo $(UBOOTVERSION)
  1698. # Single targets
  1699. # ---------------------------------------------------------------------------
  1700. # Single targets are compatible with:
  1701. # - build with mixed source and output
  1702. # - build with separate output dir 'make O=...'
  1703. # - external modules
  1704. #
  1705. # target-dir => where to store outputfile
  1706. # build-dir => directory in kernel source tree to use
  1707. ifeq ($(KBUILD_EXTMOD),)
  1708. build-dir = $(patsubst %/,%,$(dir $@))
  1709. target-dir = $(dir $@)
  1710. else
  1711. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1712. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1713. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1714. endif
  1715. %.s: %.c prepare scripts FORCE
  1716. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1717. %.i: %.c prepare scripts FORCE
  1718. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1719. %.o: %.c prepare scripts FORCE
  1720. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1721. %.lst: %.c prepare scripts FORCE
  1722. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1723. %.s: %.S prepare scripts FORCE
  1724. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1725. %.o: %.S prepare scripts FORCE
  1726. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1727. %.symtypes: %.c prepare scripts FORCE
  1728. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1729. # Modules
  1730. /: prepare scripts FORCE
  1731. $(cmd_crmodverdir)
  1732. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1733. $(build)=$(build-dir)
  1734. %/: prepare scripts FORCE
  1735. $(cmd_crmodverdir)
  1736. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1737. $(build)=$(build-dir)
  1738. %.ko: prepare scripts FORCE
  1739. $(cmd_crmodverdir)
  1740. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1741. $(build)=$(build-dir) $(@:.ko=.o)
  1742. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1743. quiet_cmd_genenv = GENENV $@
  1744. cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
  1745. sed --in-place -e 's/\x00/\x0A/g' $@
  1746. u-boot-initial-env: u-boot.bin
  1747. $(call if_changed,genenv)
  1748. # Consistency checks
  1749. # ---------------------------------------------------------------------------
  1750. PHONY += coccicheck
  1751. coccicheck:
  1752. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
  1753. # FIXME Should go into a make.lib or something
  1754. # ===========================================================================
  1755. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1756. cmd_rmdirs = rm -rf $(rm-dirs)
  1757. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1758. cmd_rmfiles = rm -f $(rm-files)
  1759. # read all saved command lines
  1760. targets := $(wildcard $(sort $(targets)))
  1761. cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
  1762. ifneq ($(cmd_files),)
  1763. $(cmd_files): ; # Do not try to update included dependency files
  1764. include $(cmd_files)
  1765. endif
  1766. endif # skip-makefile
  1767. PHONY += FORCE
  1768. FORCE:
  1769. # Declare the contents of the .PHONY variable as phony. We keep that
  1770. # information in a variable so we can use it in if_changed and friends.
  1771. .PHONY: $(PHONY)