Makefile 75 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257
  1. # SPDX-License-Identifier: GPL-2.0+
  2. VERSION = 2020
  3. PATCHLEVEL = 04
  4. SUBLEVEL =
  5. EXTRAVERSION = -rc4
  6. NAME =
  7. # *DOCUMENTATION*
  8. # To see a list of typical targets execute "make help"
  9. # More info can be located in ./README
  10. # Comments in this file are targeted only to the developer, do not
  11. # expect to learn how to build the kernel reading this file.
  12. # o Do not use make's built-in rules and variables
  13. # (this increases performance and avoids hard-to-debug behaviour);
  14. # o Look for make include files relative to root of kernel src
  15. MAKEFLAGS += -rR --include-dir=$(CURDIR)
  16. # Determine host architecture
  17. include include/host_arch.h
  18. MK_ARCH="${shell uname -m}"
  19. unexport HOST_ARCH
  20. ifeq ("x86_64", $(MK_ARCH))
  21. export HOST_ARCH=$(HOST_ARCH_X86_64)
  22. else ifneq (,$(findstring $(MK_ARCH), "i386" "i486" "i586" "i686"))
  23. export HOST_ARCH=$(HOST_ARCH_X86)
  24. else ifneq (,$(findstring $(MK_ARCH), "aarch64" "armv8l"))
  25. export HOST_ARCH=$(HOST_ARCH_AARCH64)
  26. else ifeq ("armv7l", $(MK_ARCH))
  27. export HOST_ARCH=$(HOST_ARCH_ARM)
  28. else ifeq ("riscv32", $(MK_ARCH))
  29. export HOST_ARCH=$(HOST_ARCH_RISCV32)
  30. else ifeq ("riscv64", $(MK_ARCH))
  31. export HOST_ARCH=$(HOST_ARCH_RISCV64)
  32. endif
  33. undefine MK_ARCH
  34. # Avoid funny character set dependencies
  35. unexport LC_ALL
  36. LC_COLLATE=C
  37. LC_NUMERIC=C
  38. export LC_COLLATE LC_NUMERIC
  39. # Avoid interference with shell env settings
  40. unexport GREP_OPTIONS
  41. # We are using a recursive build, so we need to do a little thinking
  42. # to get the ordering right.
  43. #
  44. # Most importantly: sub-Makefiles should only ever modify files in
  45. # their own directory. If in some directory we have a dependency on
  46. # a file in another dir (which doesn't happen often, but it's often
  47. # unavoidable when linking the built-in.o targets which finally
  48. # turn into vmlinux), we will call a sub make in that other dir, and
  49. # after that we are sure that everything which is in that other dir
  50. # is now up to date.
  51. #
  52. # The only cases where we need to modify files which have global
  53. # effects are thus separated out and done before the recursive
  54. # descending is started. They are now explicitly listed as the
  55. # prepare rule.
  56. # Beautify output
  57. # ---------------------------------------------------------------------------
  58. #
  59. # Normally, we echo the whole command before executing it. By making
  60. # that echo $($(quiet)$(cmd)), we now have the possibility to set
  61. # $(quiet) to choose other forms of output instead, e.g.
  62. #
  63. # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  64. # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
  65. #
  66. # If $(quiet) is empty, the whole command will be printed.
  67. # If it is set to "quiet_", only the short version will be printed.
  68. # If it is set to "silent_", nothing will be printed at all, since
  69. # the variable $(silent_cmd_cc_o_c) doesn't exist.
  70. #
  71. # A simple variant is to prefix commands with $(Q) - that's useful
  72. # for commands that shall be hidden in non-verbose mode.
  73. #
  74. # $(Q)ln $@ :<
  75. #
  76. # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  77. # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  78. #
  79. # To put more focus on warnings, be less verbose as default
  80. # Use 'make V=1' to see the full commands
  81. ifeq ("$(origin V)", "command line")
  82. KBUILD_VERBOSE = $(V)
  83. endif
  84. ifndef KBUILD_VERBOSE
  85. KBUILD_VERBOSE = 0
  86. endif
  87. ifeq ($(KBUILD_VERBOSE),1)
  88. quiet =
  89. Q =
  90. else
  91. quiet=quiet_
  92. Q = @
  93. endif
  94. # If the user is running make -s (silent mode), suppress echoing of
  95. # commands
  96. ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
  97. ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  98. quiet=silent_
  99. endif
  100. else # make-3.8x
  101. ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  102. quiet=silent_
  103. endif
  104. endif
  105. export quiet Q KBUILD_VERBOSE
  106. # kbuild supports saving output files in a separate directory.
  107. # To locate output files in a separate directory two syntaxes are supported.
  108. # In both cases the working directory must be the root of the kernel src.
  109. # 1) O=
  110. # Use "make O=dir/to/store/output/files/"
  111. #
  112. # 2) Set KBUILD_OUTPUT
  113. # Set the environment variable KBUILD_OUTPUT to point to the directory
  114. # where the output files shall be placed.
  115. # export KBUILD_OUTPUT=dir/to/store/output/files/
  116. # make
  117. #
  118. # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  119. # variable.
  120. # KBUILD_SRC is set on invocation of make in OBJ directory
  121. # KBUILD_SRC is not intended to be used by the regular user (for now)
  122. ifeq ($(KBUILD_SRC),)
  123. # OK, Make called in directory where kernel src resides
  124. # Do we want to locate output files in a separate directory?
  125. ifeq ("$(origin O)", "command line")
  126. KBUILD_OUTPUT := $(O)
  127. endif
  128. # That's our default target when none is given on the command line
  129. PHONY := _all
  130. _all:
  131. # Cancel implicit rules on top Makefile
  132. $(CURDIR)/Makefile Makefile: ;
  133. ifneq ($(KBUILD_OUTPUT),)
  134. # Invoke a second make in the output directory, passing relevant variables
  135. # check that the output directory actually exists
  136. saved-output := $(KBUILD_OUTPUT)
  137. KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
  138. && /bin/pwd)
  139. $(if $(KBUILD_OUTPUT),, \
  140. $(error failed to create output directory "$(saved-output)"))
  141. PHONY += $(MAKECMDGOALS) sub-make
  142. $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
  143. @:
  144. sub-make: FORCE
  145. $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
  146. -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
  147. # Leave processing to above invocation of make
  148. skip-makefile := 1
  149. endif # ifneq ($(KBUILD_OUTPUT),)
  150. endif # ifeq ($(KBUILD_SRC),)
  151. # We process the rest of the Makefile if this is the final invocation of make
  152. ifeq ($(skip-makefile),)
  153. # Do not print "Entering directory ...",
  154. # but we want to display it when entering to the output directory
  155. # so that IDEs/editors are able to understand relative filenames.
  156. MAKEFLAGS += --no-print-directory
  157. # Call a source code checker (by default, "sparse") as part of the
  158. # C compilation.
  159. #
  160. # Use 'make C=1' to enable checking of only re-compiled files.
  161. # Use 'make C=2' to enable checking of *all* source files, regardless
  162. # of whether they are re-compiled or not.
  163. #
  164. # See the file "doc/sparse.txt" for more details, including
  165. # where to get the "sparse" utility.
  166. ifeq ("$(origin C)", "command line")
  167. KBUILD_CHECKSRC = $(C)
  168. endif
  169. ifndef KBUILD_CHECKSRC
  170. KBUILD_CHECKSRC = 0
  171. endif
  172. # Use make M=dir to specify directory of external module to build
  173. # Old syntax make ... SUBDIRS=$PWD is still supported
  174. # Setting the environment variable KBUILD_EXTMOD take precedence
  175. ifdef SUBDIRS
  176. KBUILD_EXTMOD ?= $(SUBDIRS)
  177. endif
  178. ifeq ("$(origin M)", "command line")
  179. KBUILD_EXTMOD := $(M)
  180. endif
  181. # If building an external module we do not care about the all: rule
  182. # but instead _all depend on modules
  183. PHONY += all
  184. ifeq ($(KBUILD_EXTMOD),)
  185. _all: all
  186. else
  187. _all: modules
  188. endif
  189. ifeq ($(KBUILD_SRC),)
  190. # building in the source tree
  191. srctree := .
  192. else
  193. ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
  194. # building in a subdirectory of the source tree
  195. srctree := ..
  196. else
  197. srctree := $(KBUILD_SRC)
  198. endif
  199. endif
  200. objtree := .
  201. src := $(srctree)
  202. obj := $(objtree)
  203. VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
  204. export srctree objtree VPATH
  205. # Make sure CDPATH settings don't interfere
  206. unexport CDPATH
  207. #########################################################################
  208. HOSTARCH := $(shell uname -m | \
  209. sed -e s/i.86/x86/ \
  210. -e s/sun4u/sparc64/ \
  211. -e s/arm.*/arm/ \
  212. -e s/sa110/arm/ \
  213. -e s/ppc64/powerpc/ \
  214. -e s/ppc/powerpc/ \
  215. -e s/macppc/powerpc/\
  216. -e s/sh.*/sh/)
  217. HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  218. sed -e 's/\(cygwin\).*/cygwin/')
  219. export HOSTARCH HOSTOS
  220. #########################################################################
  221. # set default to nothing for native builds
  222. ifeq ($(HOSTARCH),$(ARCH))
  223. CROSS_COMPILE ?=
  224. endif
  225. KCONFIG_CONFIG ?= .config
  226. export KCONFIG_CONFIG
  227. # SHELL used by kbuild
  228. CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  229. else if [ -x /bin/bash ]; then echo /bin/bash; \
  230. else echo sh; fi ; fi)
  231. HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
  232. HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
  233. HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
  234. HOSTCC = cc
  235. HOSTCXX = c++
  236. KBUILD_HOSTCFLAGS := -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
  237. $(if $(CONFIG_TOOLS_DEBUG),-g) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
  238. KBUILD_HOSTCXXFLAGS := -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
  239. KBUILD_HOSTLDFLAGS := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
  240. KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
  241. # With the move to GCC 6, we have implicitly upgraded our language
  242. # standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
  243. # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
  244. # have older compilers as their default, so we make it explicit for
  245. # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
  246. CSTD_FLAG := -std=gnu11
  247. ifeq ($(HOSTOS),linux)
  248. KBUILD_HOSTCFLAGS += $(CSTD_FLAG)
  249. endif
  250. ifeq ($(HOSTOS),cygwin)
  251. KBUILD_HOSTCFLAGS += -ansi
  252. endif
  253. # Mac OS X / Darwin's C preprocessor is Apple specific. It
  254. # generates numerous errors and warnings. We want to bypass it
  255. # and use GNU C's cpp. To do this we pass the -traditional-cpp
  256. # option to the compiler. Note that the -traditional-cpp flag
  257. # DOES NOT have the same semantics as GNU C's flag, all it does
  258. # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
  259. #
  260. # Apple's linker is similar, thanks to the new 2 stage linking
  261. # multiple symbol definitions are treated as errors, hence the
  262. # -multiply_defined suppress option to turn off this error.
  263. #
  264. ifeq ($(HOSTOS),darwin)
  265. # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
  266. DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
  267. DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
  268. os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
  269. $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  270. os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
  271. $(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
  272. # Snow Leopards build environment has no longer restrictions as described above
  273. HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
  274. KBUILD_HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
  275. KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
  276. # since Lion (10.7) ASLR is on by default, but we use linker generated lists
  277. # in some host tools which is a problem then ... so disable ASLR for these
  278. # tools
  279. KBUILD_HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
  280. # macOS Mojave (10.14.X)
  281. # Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
  282. KBUILD_HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
  283. endif
  284. # Decide whether to build built-in, modular, or both.
  285. # Normally, just do built-in.
  286. KBUILD_MODULES :=
  287. KBUILD_BUILTIN := 1
  288. # If we have only "make modules", don't compile built-in objects.
  289. # When we're building modules with modversions, we need to consider
  290. # the built-in objects during the descend as well, in order to
  291. # make sure the checksums are up to date before we record them.
  292. ifeq ($(MAKECMDGOALS),modules)
  293. KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
  294. endif
  295. # If we have "make <whatever> modules", compile modules
  296. # in addition to whatever we do anyway.
  297. # Just "make" or "make all" shall build modules as well
  298. # U-Boot does not need modules
  299. #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
  300. # KBUILD_MODULES := 1
  301. #endif
  302. #ifeq ($(MAKECMDGOALS),)
  303. # KBUILD_MODULES := 1
  304. #endif
  305. # Check ths size of a binary:
  306. # Args:
  307. # $1: File to check
  308. # #2: Size limit in bytes (decimal or 0xhex)
  309. define size_check
  310. actual=$$( wc -c $1 | awk '{print $$1}'); \
  311. limit=$$( printf "%d" $2 ); \
  312. if test $$actual -gt $$limit; then \
  313. echo "$1 exceeds file size limit:" >&2; \
  314. echo " limit: $$(printf %#x $$limit) bytes" >&2; \
  315. echo " actual: $$(printf %#x $$actual) bytes" >&2; \
  316. echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
  317. exit 1; \
  318. fi
  319. endef
  320. export size_check
  321. export KBUILD_MODULES KBUILD_BUILTIN
  322. export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
  323. # We need some generic definitions (do not try to remake the file).
  324. scripts/Kbuild.include: ;
  325. include scripts/Kbuild.include
  326. # Make variables (CC, etc...)
  327. AS = $(CROSS_COMPILE)as
  328. # Always use GNU ld
  329. ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
  330. LD = $(CROSS_COMPILE)ld.bfd
  331. else
  332. LD = $(CROSS_COMPILE)ld
  333. endif
  334. CC = $(CROSS_COMPILE)gcc
  335. CPP = $(CC) -E
  336. AR = $(CROSS_COMPILE)ar
  337. NM = $(CROSS_COMPILE)nm
  338. LDR = $(CROSS_COMPILE)ldr
  339. STRIP = $(CROSS_COMPILE)strip
  340. OBJCOPY = $(CROSS_COMPILE)objcopy
  341. OBJDUMP = $(CROSS_COMPILE)objdump
  342. LEX = flex
  343. YACC = bison
  344. AWK = awk
  345. PERL = perl
  346. PYTHON ?= python
  347. PYTHON2 = python2
  348. PYTHON3 = python3
  349. DTC ?= $(objtree)/scripts/dtc/dtc
  350. CHECK = sparse
  351. CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
  352. -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
  353. KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
  354. KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
  355. -Wno-format-security \
  356. -fno-builtin -ffreestanding $(CSTD_FLAG)
  357. KBUILD_CFLAGS += -fshort-wchar -fno-strict-aliasing
  358. KBUILD_AFLAGS := -D__ASSEMBLY__
  359. KBUILD_LDFLAGS :=
  360. ifeq ($(cc-name),clang)
  361. ifneq ($(CROSS_COMPILE),)
  362. CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
  363. GCC_TOOLCHAIN_DIR := $(dir $(shell which $(LD)))
  364. CLANG_PREFIX := --prefix=$(GCC_TOOLCHAIN_DIR)
  365. GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
  366. endif
  367. ifneq ($(GCC_TOOLCHAIN),)
  368. CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
  369. endif
  370. KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  371. KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC) $(CLANG_PREFIX)
  372. KBUILD_CFLAGS += $(call cc-option, -no-integrated-as)
  373. KBUILD_AFLAGS += $(call cc-option, -no-integrated-as)
  374. endif
  375. # Don't generate position independent code
  376. KBUILD_CFLAGS += $(call cc-option,-fno-PIE)
  377. KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
  378. # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
  379. UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
  380. UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  381. export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
  382. export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
  383. export CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
  384. export CPP AR NM LDR STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
  385. export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
  386. export HOSTCXX KBUILD_HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
  387. export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
  388. export KBUILD_CFLAGS KBUILD_AFLAGS
  389. export CC_VERSION_TEXT := $(shell $(CC) --version | head -n 1)
  390. # When compiling out-of-tree modules, put MODVERDIR in the module
  391. # tree rather than in the kernel tree. The kernel tree might
  392. # even be read-only.
  393. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
  394. # Files to ignore in find ... statements
  395. export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
  396. -name CVS -o -name .pc -o -name .hg -o -name .git \) \
  397. -prune -o
  398. export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
  399. --exclude CVS --exclude .pc --exclude .hg --exclude .git
  400. # ===========================================================================
  401. # Rules shared between *config targets and build targets
  402. # Basic helpers built in scripts/
  403. PHONY += scripts_basic
  404. scripts_basic:
  405. $(Q)$(MAKE) $(build)=scripts/basic
  406. $(Q)rm -f .tmp_quiet_recordmcount
  407. # To avoid any implicit rule to kick in, define an empty command.
  408. scripts/basic/%: scripts_basic ;
  409. PHONY += outputmakefile
  410. # outputmakefile generates a Makefile in the output directory, if using a
  411. # separate output directory. This allows convenient use of make in the
  412. # output directory.
  413. outputmakefile:
  414. ifneq ($(KBUILD_SRC),)
  415. $(Q)ln -fsn $(srctree) source
  416. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
  417. $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
  418. endif
  419. # To make sure we do not include .config for any of the *config targets
  420. # catch them early, and hand them over to scripts/kconfig/Makefile
  421. # It is allowed to specify more targets when calling make, including
  422. # mixing *config targets and build targets.
  423. # For example 'make oldconfig all'.
  424. # Detect when mixed targets is specified, and make a second invocation
  425. # of make so .config is not included in this case either (for *config).
  426. version_h := include/generated/version_autogenerated.h
  427. timestamp_h := include/generated/timestamp_autogenerated.h
  428. defaultenv_h := include/generated/defaultenv_autogenerated.h
  429. dt_h := include/generated/dt.h
  430. no-dot-config-targets := clean clobber mrproper distclean \
  431. help %docs check% coccicheck \
  432. ubootversion backup tests check qcheck
  433. config-targets := 0
  434. mixed-targets := 0
  435. dot-config := 1
  436. ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
  437. ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
  438. dot-config := 0
  439. endif
  440. endif
  441. ifeq ($(KBUILD_EXTMOD),)
  442. ifneq ($(filter config %config,$(MAKECMDGOALS)),)
  443. config-targets := 1
  444. ifneq ($(words $(MAKECMDGOALS)),1)
  445. mixed-targets := 1
  446. endif
  447. endif
  448. endif
  449. ifeq ($(mixed-targets),1)
  450. # ===========================================================================
  451. # We're called with mixed targets (*config and build targets).
  452. # Handle them one by one.
  453. PHONY += $(MAKECMDGOALS) __build_one_by_one
  454. $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
  455. @:
  456. __build_one_by_one:
  457. $(Q)set -e; \
  458. for i in $(MAKECMDGOALS); do \
  459. $(MAKE) -f $(srctree)/Makefile $$i; \
  460. done
  461. else
  462. ifeq ($(config-targets),1)
  463. # ===========================================================================
  464. # *config targets only - make sure prerequisites are updated, and descend
  465. # in scripts/kconfig to make the *config target
  466. KBUILD_DEFCONFIG := sandbox_defconfig
  467. export KBUILD_DEFCONFIG KBUILD_KCONFIG
  468. config: scripts_basic outputmakefile FORCE
  469. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  470. %config: scripts_basic outputmakefile FORCE
  471. $(Q)$(MAKE) $(build)=scripts/kconfig $@
  472. else
  473. # ===========================================================================
  474. # Build targets only - this includes vmlinux, arch specific targets, clean
  475. # targets and others. In general all targets except *config targets.
  476. # Additional helpers built in scripts/
  477. # Carefully list dependencies so we do not try to build scripts twice
  478. # in parallel
  479. PHONY += scripts
  480. scripts: scripts_basic include/config/auto.conf
  481. $(Q)$(MAKE) $(build)=$(@)
  482. ifeq ($(dot-config),1)
  483. # Read in config
  484. -include include/config/auto.conf
  485. # Read in dependencies to all Kconfig* files, make sure to run
  486. # oldconfig if changes are detected.
  487. -include include/config/auto.conf.cmd
  488. # To avoid any implicit rule to kick in, define an empty command
  489. $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
  490. # If .config is newer than include/config/auto.conf, someone tinkered
  491. # with it and forgot to run make oldconfig.
  492. # if auto.conf.cmd is missing then we are probably in a cleaned tree so
  493. # we execute the config step to be sure to catch updated Kconfig files
  494. include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
  495. $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
  496. @# If the following part fails, include/config/auto.conf should be
  497. @# deleted so "make silentoldconfig" will be re-run on the next build.
  498. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
  499. { rm -f include/config/auto.conf; false; }
  500. @# include/config.h has been updated after "make silentoldconfig".
  501. @# We need to touch include/config/auto.conf so it gets newer
  502. @# than include/config.h.
  503. @# Otherwise, 'make silentoldconfig' would be invoked twice.
  504. $(Q)touch include/config/auto.conf
  505. u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
  506. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
  507. -include include/autoconf.mk
  508. -include include/autoconf.mk.dep
  509. # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
  510. # is up-to-date. When we switch to a different board configuration, old CONFIG
  511. # macros are still remaining in include/config/auto.conf. Without the following
  512. # gimmick, wrong config.mk would be included leading nasty warnings/errors.
  513. ifneq ($(wildcard $(KCONFIG_CONFIG)),)
  514. ifneq ($(wildcard include/config/auto.conf),)
  515. autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
  516. include/config/auto.conf)
  517. ifeq ($(autoconf_is_old),)
  518. include config.mk
  519. include arch/$(ARCH)/Makefile
  520. endif
  521. endif
  522. endif
  523. # These are set by the arch-specific config.mk. Make sure they are exported
  524. # so they can be used when building an EFI application.
  525. export EFI_LDS # Filename of EFI link script in arch/$(ARCH)/lib
  526. export EFI_CRT0 # Filename of EFI CRT0 in arch/$(ARCH)/lib
  527. export EFI_RELOC # Filename of EFU relocation code in arch/$(ARCH)/lib
  528. export CFLAGS_EFI # Compiler flags to add when building EFI app
  529. export CFLAGS_NON_EFI # Compiler flags to remove when building EFI app
  530. export EFI_TARGET # binutils target if EFI is natively supported
  531. # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
  532. # that (or fail if absent). Otherwise, search for a linker script in a
  533. # standard location.
  534. ifndef LDSCRIPT
  535. #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
  536. ifdef CONFIG_SYS_LDSCRIPT
  537. # need to strip off double quotes
  538. LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
  539. endif
  540. endif
  541. # If there is no specified link script, we look in a number of places for it
  542. ifndef LDSCRIPT
  543. ifeq ($(wildcard $(LDSCRIPT)),)
  544. LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
  545. endif
  546. ifeq ($(wildcard $(LDSCRIPT)),)
  547. LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
  548. endif
  549. ifeq ($(wildcard $(LDSCRIPT)),)
  550. LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
  551. endif
  552. endif
  553. else
  554. # Dummy target needed, because used as prerequisite
  555. include/config/auto.conf: ;
  556. endif # $(dot-config)
  557. #
  558. # Xtensa linker script cannot be preprocessed with -ansi because of
  559. # preprocessor operations on strings that don't make C identifiers.
  560. #
  561. ifeq ($(CONFIG_XTENSA),)
  562. LDPPFLAGS += -ansi
  563. endif
  564. ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
  565. KBUILD_CFLAGS += -Os
  566. else
  567. KBUILD_CFLAGS += -O2
  568. endif
  569. KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
  570. KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
  571. # disable stringop warnings in gcc 8+
  572. KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
  573. # change __FILE__ to the relative path from the srctree
  574. KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
  575. KBUILD_CFLAGS += -g
  576. # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
  577. # option to the assembler.
  578. KBUILD_AFLAGS += -g
  579. # Report stack usage if supported
  580. # ARC tools based on GCC 7.1 has an issue with stack usage
  581. # with naked functions, see commit message for more details
  582. ifndef CONFIG_ARC
  583. ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
  584. KBUILD_CFLAGS += -fstack-usage
  585. endif
  586. endif
  587. KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
  588. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  589. ifeq ($(cc-name),clang)
  590. KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
  591. KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
  592. KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
  593. KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
  594. # Quiet clang warning: comparison of unsigned expression < 0 is always false
  595. KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
  596. # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
  597. # source of a reference will be _MergedGlobals and not on of the whitelisted names.
  598. # See modpost pattern 2
  599. KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
  600. KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
  601. else
  602. # These warnings generated too much noise in a regular build.
  603. # Use make W=1 to enable them (see scripts/Makefile.extrawarn)
  604. KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
  605. endif
  606. # turn jbsr into jsr for m68k
  607. ifeq ($(ARCH),m68k)
  608. ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
  609. KBUILD_AFLAGS += -Wa,-gstabs,-S
  610. endif
  611. endif
  612. # Prohibit date/time macros, which would make the build non-deterministic
  613. KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
  614. include scripts/Makefile.extrawarn
  615. # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
  616. KBUILD_CPPFLAGS += $(KCPPFLAGS)
  617. KBUILD_AFLAGS += $(KAFLAGS)
  618. KBUILD_CFLAGS += $(KCFLAGS)
  619. # Use UBOOTINCLUDE when you must reference the include/ directory.
  620. # Needed to be compatible with the O= option
  621. UBOOTINCLUDE := \
  622. -Iinclude \
  623. $(if $(KBUILD_SRC), -I$(srctree)/include) \
  624. $(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
  625. $(if $(CONFIG_HAS_THUMB2),, \
  626. -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
  627. -I$(srctree)/arch/$(ARCH)/include \
  628. -include $(srctree)/include/linux/kconfig.h
  629. NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
  630. # FIX ME
  631. cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  632. $(NOSTDINC_FLAGS)
  633. c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
  634. #########################################################################
  635. # U-Boot objects....order is important (i.e. start must be first)
  636. HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  637. libs-y += lib/
  638. libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  639. libs-$(CONFIG_OF_EMBED) += dts/
  640. libs-y += fs/
  641. libs-y += net/
  642. libs-y += disk/
  643. libs-y += drivers/
  644. libs-y += drivers/dma/
  645. libs-y += drivers/gpio/
  646. libs-y += drivers/i2c/
  647. libs-y += drivers/net/
  648. libs-y += drivers/net/phy/
  649. libs-y += drivers/power/ \
  650. drivers/power/domain/ \
  651. drivers/power/fuel_gauge/ \
  652. drivers/power/mfd/ \
  653. drivers/power/pmic/ \
  654. drivers/power/battery/ \
  655. drivers/power/regulator/
  656. libs-y += drivers/spi/
  657. libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
  658. libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
  659. libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
  660. libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
  661. libs-y += drivers/serial/
  662. libs-y += drivers/usb/cdns3/
  663. libs-y += drivers/usb/dwc3/
  664. libs-y += drivers/usb/common/
  665. libs-y += drivers/usb/emul/
  666. libs-y += drivers/usb/eth/
  667. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
  668. libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
  669. libs-y += drivers/usb/host/
  670. libs-y += drivers/usb/musb/
  671. libs-y += drivers/usb/musb-new/
  672. libs-y += drivers/usb/phy/
  673. libs-y += drivers/usb/ulpi/
  674. libs-y += cmd/
  675. libs-y += common/
  676. libs-y += env/
  677. libs-$(CONFIG_API) += api/
  678. ifdef CONFIG_POST
  679. libs-y += post/
  680. endif
  681. libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
  682. libs-$(CONFIG_UT_ENV) += test/env/
  683. libs-$(CONFIG_UT_OPTEE) += test/optee/
  684. libs-$(CONFIG_UT_OVERLAY) += test/overlay/
  685. libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  686. libs-y := $(sort $(libs-y))
  687. u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
  688. u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
  689. libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  690. u-boot-init := $(head-y)
  691. u-boot-main := $(libs-y)
  692. # Add GCC lib
  693. ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  694. PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  695. else
  696. PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
  697. endif
  698. PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  699. ifdef CONFIG_CC_COVERAGE
  700. KBUILD_CFLAGS += --coverage
  701. PLATFORM_LIBGCC += -lgcov
  702. endif
  703. export PLATFORM_LIBS
  704. export PLATFORM_LIBGCC
  705. # Special flags for CPP when processing the linker script.
  706. # Pass the version down so we can handle backwards compatibility
  707. # on the fly.
  708. LDPPFLAGS += \
  709. -include $(srctree)/include/u-boot/u-boot.lds.h \
  710. -DCPUDIR=$(CPUDIR) \
  711. $(shell $(LD) --version | \
  712. sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
  713. #########################################################################
  714. #########################################################################
  715. ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
  716. BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
  717. else
  718. BOARD_SIZE_CHECK =
  719. endif
  720. ifneq ($(CONFIG_SPL_SIZE_LIMIT),0)
  721. SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
  722. else
  723. SPL_SIZE_CHECK =
  724. endif
  725. ifneq ($(CONFIG_TPL_SIZE_LIMIT),0)
  726. TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
  727. else
  728. TPL_SIZE_CHECK =
  729. endif
  730. # Statically apply RELA-style relocations (currently arm64 only)
  731. # This is useful for arm64 where static relocation needs to be performed on
  732. # the raw binary, but certain simulators only accept an ELF file (but don't
  733. # do the relocation).
  734. ifneq ($(CONFIG_STATIC_RELA),)
  735. # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
  736. DO_STATIC_RELA = \
  737. start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
  738. end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
  739. tools/relocate-rela $(2) $(3) $$start $$end
  740. else
  741. DO_STATIC_RELA =
  742. endif
  743. # Always append ALL so that arch config.mk's can add custom ones
  744. ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
  745. ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
  746. ifeq ($(CONFIG_SPL_FSL_PBL),y)
  747. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
  748. else
  749. ifneq ($(CONFIG_SECURE_BOOT), y)
  750. # For Secure Boot The Image needs to be signed and Header must also
  751. # be included. So The image has to be built explicitly
  752. ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
  753. endif
  754. endif
  755. ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
  756. ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
  757. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  758. else
  759. ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
  760. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
  761. else
  762. ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
  763. endif
  764. endif
  765. ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
  766. ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
  767. ifeq ($(CONFIG_SPL_FRAMEWORK),y)
  768. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
  769. endif
  770. ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
  771. ifneq ($(CONFIG_SPL_TARGET),)
  772. ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
  773. endif
  774. ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
  775. ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
  776. ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
  777. ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
  778. ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
  779. endif
  780. # Build a combined spl + u-boot image for sunxi
  781. ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
  782. ALL-y += u-boot-sunxi-with-spl.bin
  783. endif
  784. # enable combined SPL/u-boot/dtb rules for tegra
  785. ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
  786. ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
  787. ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
  788. endif
  789. ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
  790. # Add optional build target if defined in board/cpu/soc headers
  791. ifneq ($(CONFIG_BUILD_TARGET),)
  792. ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
  793. endif
  794. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  795. ALL-y += init_sp_bss_offset_check
  796. endif
  797. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  798. ALL-y += u-boot-with-dtb.bin
  799. endif
  800. ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
  801. ALL-y += u-boot-rockchip.bin
  802. endif
  803. LDFLAGS_u-boot += $(LDFLAGS_FINAL)
  804. # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
  805. LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
  806. ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
  807. LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
  808. endif
  809. # insure the checker run with the right endianness
  810. CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
  811. # the checker needs the correct machine size
  812. CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
  813. # Normally we fill empty space with 0xff
  814. quiet_cmd_objcopy = OBJCOPY $@
  815. cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
  816. $(OBJCOPYFLAGS_$(@F)) $< $@
  817. # Provide a version which does not do this, for use by EFI
  818. quiet_cmd_zobjcopy = OBJCOPY $@
  819. cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
  820. quiet_cmd_efipayload = OBJCOPY $@
  821. cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
  822. MKIMAGEOUTPUT ?= /dev/null
  823. quiet_cmd_mkimage = MKIMAGE $@
  824. cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
  825. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  826. quiet_cmd_mkfitimage = MKIMAGE $@
  827. cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
  828. >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
  829. quiet_cmd_cat = CAT $@
  830. cmd_cat = cat $(filter-out $(PHONY), $^) > $@
  831. append = cat $(filter-out $< $(PHONY), $^) >> $@
  832. quiet_cmd_pad_cat = CAT $@
  833. cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
  834. cfg: u-boot.cfg
  835. quiet_cmd_cfgcheck = CFGCHK $2
  836. cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
  837. $(srctree)/scripts/config_whitelist.txt $(srctree)
  838. all: $(ALL-y)
  839. ifeq ($(CONFIG_DEPRECATED),y)
  840. $(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
  841. ifeq ($(CONFIG_SPI),y)
  842. ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
  843. $(warning "The relevant config item with associated code will remove in v2019.07 release.")
  844. endif
  845. endif
  846. endif
  847. ifneq ($(CONFIG_DM),y)
  848. @echo >&2 "===================== WARNING ======================"
  849. @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
  850. @echo >&2 "compulsory starting with the v2020.01 release."
  851. @echo >&2 "Failure to update may result in board removal."
  852. @echo >&2 "See doc/driver-model/migration.rst for more info."
  853. @echo >&2 "===================================================="
  854. endif
  855. ifeq ($(CONFIG_MMC),y)
  856. ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
  857. @echo >&2 "===================== WARNING ======================"
  858. @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
  859. @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
  860. @echo >&2 "Failure to update by the deadline may result in board removal."
  861. @echo >&2 "See doc/driver-model/migration.rst for more info."
  862. @echo >&2 "===================================================="
  863. endif
  864. endif
  865. ifeq ($(CONFIG_USB),y)
  866. ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
  867. @echo >&2 "===================== WARNING ======================"
  868. @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
  869. @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
  870. @echo >&2 "Failure to update by the deadline may result in board removal."
  871. @echo >&2 "See doc/driver-model/migration.rst for more info."
  872. @echo >&2 "===================================================="
  873. endif
  874. endif
  875. ifeq ($(CONFIG_MVSATA_IDE),y)
  876. @echo >&2 "===================== WARNING ======================"
  877. @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
  878. @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
  879. @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
  880. @echo >&2 "release."
  881. @echo >&2 "Failure to update by the deadline may result in board removal."
  882. @echo >&2 "See doc/driver-model/migration.rst for more info."
  883. @echo >&2 "===================================================="
  884. endif
  885. ifeq ($(CONFIG_LIBATA),y)
  886. ifneq ($(CONFIG_AHCI),y)
  887. @echo >&2 "===================== WARNING ======================"
  888. @echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
  889. @echo >&2 "enabled. Please update the storage controller driver to use"
  890. @echo >&2 "CONFIG_AHCI before the v2019.07 release."
  891. @echo >&2 "Failure to update by the deadline may result in board removal."
  892. @echo >&2 "See doc/driver-model/migration.rst for more info."
  893. @echo >&2 "===================================================="
  894. endif
  895. endif
  896. ifeq ($(CONFIG_PCI),y)
  897. ifneq ($(CONFIG_DM_PCI),y)
  898. @echo >&2 "===================== WARNING ======================"
  899. @echo >&2 "This board does not use CONFIG_DM_PCI Please update"
  900. @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
  901. @echo >&2 "Failure to update by the deadline may result in board removal."
  902. @echo >&2 "See doc/driver-model/migration.rst for more info."
  903. @echo >&2 "===================================================="
  904. endif
  905. endif
  906. ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
  907. ifneq ($(CONFIG_DM_VIDEO),y)
  908. @echo >&2 "===================== WARNING ======================"
  909. @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
  910. @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
  911. @echo >&2 "Failure to update by the deadline may result in board removal."
  912. @echo >&2 "See doc/driver-model/migration.rst for more info."
  913. @echo >&2 "===================================================="
  914. endif
  915. endif
  916. ifeq ($(CONFIG_OF_EMBED),y)
  917. @echo >&2 "===================== WARNING ======================"
  918. @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
  919. @echo >&2 "be used for debugging purposes. Please use"
  920. @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
  921. @echo >&2 "See doc/README.fdt-control for more info."
  922. @echo >&2 "===================================================="
  923. endif
  924. ifeq ($(CONFIG_SPI_FLASH),y)
  925. ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
  926. @echo >&2 "===================== WARNING ======================"
  927. @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
  928. @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
  929. @echo >&2 "Failure to update by the deadline may result in board removal."
  930. @echo >&2 "See doc/driver-model/migration.rst for more info."
  931. @echo >&2 "===================================================="
  932. endif
  933. endif
  934. ifneq ($(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG),)
  935. ifneq ($(CONFIG_WDT),y)
  936. @echo >&2 "===================== WARNING ======================"
  937. @echo >&2 "This board does not use CONFIG_WDT (DM watchdog support)."
  938. @echo >&2 "Please update the board to use CONFIG_WDT before the"
  939. @echo >&2 "v2019.10 release."
  940. @echo >&2 "Failure to update by the deadline may result in board removal."
  941. @echo >&2 "See doc/driver-model/migration.rst for more info."
  942. @echo >&2 "===================================================="
  943. endif
  944. endif
  945. ifneq ($(CONFIG_NET),)
  946. ifneq ($(CONFIG_DM_ETH),y)
  947. @echo >&2 "===================== WARNING ======================"
  948. @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
  949. @echo >&2 "for Ethernet drivers). Please update the board to use"
  950. @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
  951. @echo >&2 "update by the deadline may result in board removal."
  952. @echo >&2 "See doc/driver-model/migration.rst for more info."
  953. @echo >&2 "===================================================="
  954. endif
  955. endif
  956. @# Check that this build does not use CONFIG options that we do not
  957. @# know about unless they are in Kconfig. All the existing CONFIG
  958. @# options are whitelisted, so new ones should not be added.
  959. $(call cmd,cfgcheck,u-boot.cfg)
  960. PHONY += dtbs
  961. dtbs: dts/dt.dtb
  962. @:
  963. dts/dt.dtb: u-boot
  964. $(Q)$(MAKE) $(build)=dts dtbs
  965. quiet_cmd_copy = COPY $@
  966. cmd_copy = cp $< $@
  967. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  968. ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
  969. FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
  970. else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
  971. FINAL_DTB_CONTAINER = fit-dtb.blob.gz
  972. else
  973. FINAL_DTB_CONTAINER = fit-dtb.blob
  974. endif
  975. fit-dtb.blob.gz: fit-dtb.blob
  976. @gzip -kf9 $< > $@
  977. fit-dtb.blob.lzo: fit-dtb.blob
  978. @lzop -f9 $< > $@
  979. fit-dtb.blob: dts/dt.dtb FORCE
  980. $(call if_changed,mkimage)
  981. ifneq ($(SOURCE_DATE_EPOCH),)
  982. touch -d @$(SOURCE_DATE_EPOCH) fit-dtb.blob
  983. chmod 0600 fit-dtb.blob
  984. endif
  985. MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  986. -a 0 -e 0 -E \
  987. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
  988. ifneq ($(EXT_DTB),)
  989. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
  990. $(call if_changed,cat)
  991. else
  992. u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
  993. $(call if_changed,cat)
  994. endif
  995. u-boot.bin: u-boot-fit-dtb.bin FORCE
  996. $(call if_changed,copy)
  997. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  998. $(call if_changed,cat)
  999. else ifeq ($(CONFIG_OF_SEPARATE),y)
  1000. u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
  1001. $(call if_changed,cat)
  1002. u-boot.bin: u-boot-dtb.bin FORCE
  1003. $(call if_changed,copy)
  1004. else
  1005. u-boot.bin: u-boot-nodtb.bin FORCE
  1006. $(call if_changed,copy)
  1007. endif
  1008. # we call Makefile in arch/arm/mach-imx which
  1009. # has targets which are dependent on targets defined
  1010. # here. make could not resolve them and we must ensure
  1011. # that they are finished before calling imx targets
  1012. ifeq ($(CONFIG_MULTI_DTB_FIT),y)
  1013. IMX_DEPS = u-boot-fit-dtb.bin
  1014. endif
  1015. %.imx: $(IMX_DEPS) %.bin
  1016. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1017. $(BOARD_SIZE_CHECK)
  1018. %.vyb: %.imx
  1019. $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
  1020. quiet_cmd_copy = COPY $@
  1021. cmd_copy = cp $< $@
  1022. u-boot.dtb: dts/dt.dtb
  1023. $(call cmd,copy)
  1024. OBJCOPYFLAGS_u-boot.hex := -O ihex
  1025. OBJCOPYFLAGS_u-boot.srec := -O srec
  1026. u-boot.hex u-boot.srec: u-boot FORCE
  1027. $(call if_changed,objcopy)
  1028. OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
  1029. u-boot-elf.srec: u-boot.elf FORCE
  1030. $(call if_changed,objcopy)
  1031. OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
  1032. spl/u-boot-spl.srec: spl/u-boot-spl FORCE
  1033. $(call if_changed,objcopy)
  1034. %.scif: %.srec
  1035. $(Q)$(MAKE) $(build)=arch/arm/mach-rmobile $@
  1036. OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
  1037. $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
  1038. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
  1039. OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
  1040. spl/u-boot-spl.hex: spl/u-boot-spl FORCE
  1041. $(call if_changed,objcopy)
  1042. binary_size_check: u-boot-nodtb.bin FORCE
  1043. @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
  1044. map_size=$(shell cat u-boot.map | \
  1045. awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
  1046. | sed 's/0X//g' \
  1047. | bc); \
  1048. if [ "" != "$$map_size" ]; then \
  1049. if test $$map_size -ne $$file_size; then \
  1050. echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
  1051. echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \
  1052. exit 1; \
  1053. fi \
  1054. fi
  1055. ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
  1056. ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
  1057. subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
  1058. else
  1059. subtract_sys_malloc_f_len = true
  1060. endif
  1061. # The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
  1062. # so low that the DTB could probably use 90%+ of the available space, for
  1063. # current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
  1064. # safe for now and tweak this later if space becomes tight.
  1065. # A rejected alternative would be to check that some absolute minimum stack
  1066. # space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
  1067. # deliberately build-specific, to take account of build-to-build stack usage
  1068. # differences due to different feature sets, there is no common absolute value
  1069. # to check against.
  1070. init_sp_bss_offset_check: u-boot.dtb FORCE
  1071. @dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
  1072. space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
  1073. $(subtract_sys_malloc_f_len) ; \
  1074. quarter_space=$$(($${space} / 4)) ; \
  1075. if [ $${dtb_size} -gt $${quarter_space} ]; then \
  1076. echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
  1077. echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
  1078. exit 1 ; \
  1079. fi
  1080. endif
  1081. u-boot-nodtb.bin: u-boot FORCE
  1082. $(call if_changed,objcopy)
  1083. $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
  1084. $(BOARD_SIZE_CHECK)
  1085. u-boot.ldr: u-boot
  1086. $(CREATE_LDR_ENV)
  1087. $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
  1088. $(BOARD_SIZE_CHECK)
  1089. # binman
  1090. # ---------------------------------------------------------------------------
  1091. # Use 'make BINMAN_DEBUG=1' to enable debugging
  1092. quiet_cmd_binman = BINMAN $@
  1093. cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
  1094. --toolpath $(objtree)/tools \
  1095. $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
  1096. build -u -d u-boot.dtb -O . -m \
  1097. -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
  1098. $(BINMAN_$(@F))
  1099. OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
  1100. OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
  1101. u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
  1102. $(call if_changed,objcopy)
  1103. #
  1104. # U-Boot entry point, needed for booting of full-blown U-Boot
  1105. # from the SPL U-Boot version.
  1106. #
  1107. ifndef CONFIG_SYS_UBOOT_START
  1108. CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
  1109. endif
  1110. # Boards with more complex image requirements can provide an .its source file
  1111. # or a generator script
  1112. ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
  1113. U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
  1114. else
  1115. ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
  1116. U_BOOT_ITS := u-boot.its
  1117. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
  1118. U_BOOT_ITS_DEPS += u-boot-nodtb.bin
  1119. endif
  1120. ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
  1121. U_BOOT_ITS_DEPS += u-boot
  1122. endif
  1123. $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
  1124. $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
  1125. $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
  1126. endif
  1127. endif
  1128. ifdef CONFIG_SPL_LOAD_FIT
  1129. MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
  1130. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1131. -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
  1132. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
  1133. $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) \
  1134. $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
  1135. else
  1136. MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
  1137. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1138. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1139. MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
  1140. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
  1141. -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
  1142. u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
  1143. endif
  1144. MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
  1145. # Some boards have the kwbimage.cfg file written in advance, while some
  1146. # other boards generate it on the fly during the build in the build tree.
  1147. # Let's check if the file exists in the build tree first, otherwise we
  1148. # fall back to use the one in the source tree.
  1149. KWD_CONFIG_FILE = $(shell \
  1150. if [ -f $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) ]; then \
  1151. echo -n $(objtree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1152. else \
  1153. echo -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%); \
  1154. fi)
  1155. MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
  1156. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
  1157. MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
  1158. -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1159. $(if $(KEYDIR),-k $(KEYDIR))
  1160. MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1161. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
  1162. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1163. UBOOT_BIN := u-boot-with-dtb.bin
  1164. else
  1165. UBOOT_BIN := u-boot.bin
  1166. endif
  1167. u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
  1168. $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
  1169. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1170. ,$(UBOOT_BIN)) FORCE
  1171. $(call if_changed,mkimage)
  1172. $(BOARD_SIZE_CHECK)
  1173. ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
  1174. MKIMAGEFLAGS_u-boot.itb =
  1175. else
  1176. MKIMAGEFLAGS_u-boot.itb = -E
  1177. endif
  1178. u-boot.itb: u-boot-nodtb.bin \
  1179. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
  1180. $(U_BOOT_ITS) FORCE
  1181. $(call if_changed,mkfitimage)
  1182. $(BOARD_SIZE_CHECK)
  1183. u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
  1184. $(call if_changed,mkimage)
  1185. u-boot.sha1: u-boot.bin
  1186. tools/ubsha1 u-boot.bin
  1187. u-boot.dis: u-boot
  1188. $(OBJDUMP) -d $< > $@
  1189. ifneq ($(CONFIG_SPL_PAYLOAD),)
  1190. SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
  1191. else
  1192. SPL_PAYLOAD := u-boot.bin
  1193. endif
  1194. SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
  1195. OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
  1196. --pad-to=$(CONFIG_SPL_PAD_TO)
  1197. u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
  1198. $(call if_changed,pad_cat)
  1199. ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
  1200. # rockchip image type
  1201. ifeq ($(CONFIG_SPL_SPI_LOAD),y)
  1202. ROCKCHIP_IMG_TYPE := rkspi
  1203. else
  1204. ROCKCHIP_IMG_TYPE := rksd
  1205. endif
  1206. # TPL + SPL
  1207. ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
  1208. MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
  1209. tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
  1210. $(call if_changed,mkimage)
  1211. idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
  1212. $(call if_changed,cat)
  1213. else
  1214. MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
  1215. idbloader.img: spl/u-boot-spl.bin FORCE
  1216. $(call if_changed,mkimage)
  1217. endif
  1218. ifeq ($(CONFIG_ARM64),)
  1219. u-boot-rockchip.bin: idbloader.img u-boot.img FORCE
  1220. $(call if_changed,binman)
  1221. else
  1222. OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \
  1223. --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
  1224. u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE
  1225. $(call if_changed,pad_cat)
  1226. endif # CONFIG_ARM64
  1227. endif # CONFIG_ARCH_ROCKCHIP
  1228. ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
  1229. MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
  1230. lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
  1231. $(call if_changed,mkimage)
  1232. OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1233. lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
  1234. $(call if_changed,objcopy)
  1235. OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1236. lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
  1237. $(call if_changed,objcopy)
  1238. lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
  1239. $(call if_changed,cat)
  1240. endif
  1241. OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
  1242. --pad-to=$(CONFIG_TPL_PAD_TO)
  1243. tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
  1244. $(call if_changed,pad_cat)
  1245. SPL: spl/u-boot-spl.bin FORCE
  1246. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1247. ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
  1248. ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
  1249. u-boot.cnt: u-boot.bin FORCE
  1250. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1251. flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
  1252. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1253. else
  1254. flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
  1255. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1256. endif
  1257. endif
  1258. u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
  1259. $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
  1260. MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
  1261. u-boot.ubl: u-boot-with-spl.bin FORCE
  1262. $(call if_changed,mkimage)
  1263. MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
  1264. $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
  1265. -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
  1266. spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
  1267. $(call if_changed,mkimage)
  1268. OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
  1269. u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
  1270. $(call if_changed,pad_cat)
  1271. u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
  1272. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
  1273. u-boot.sb: u-boot.bin spl/u-boot-spl.bin
  1274. $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
  1275. # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
  1276. # Both images are created using mkimage (crc etc), so that the ROM
  1277. # bootloader can check its integrity. Padding needs to be done to the
  1278. # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
  1279. # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
  1280. # The resulting image containing both U-Boot images is called u-boot.spr
  1281. MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
  1282. -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
  1283. spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
  1284. $(call if_changed,mkimage)
  1285. OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1286. --gap-fill=0xff
  1287. u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
  1288. $(call if_changed,pad_cat)
  1289. ifneq ($(CONFIG_ARCH_SOCFPGA),)
  1290. quiet_cmd_socboot = SOCBOOT $@
  1291. cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1292. spl/u-boot-spl.sfp spl/u-boot-spl.sfp \
  1293. u-boot.img > $@ || rm -f $@
  1294. u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
  1295. $(call if_changed,socboot)
  1296. quiet_cmd_socnandboot = SOCNANDBOOT $@
  1297. cmd_socnandboot = dd if=/dev/zero of=spl/u-boot-spl.pad bs=64 count=1024 ; \
  1298. cat spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1299. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1300. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1301. spl/u-boot-spl.sfp spl/u-boot-spl.pad \
  1302. u-boot.img > $@ || rm -f $@ spl/u-boot-spl.pad
  1303. u-boot-with-nand-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
  1304. $(call if_changed,socnandboot)
  1305. endif
  1306. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1307. u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
  1308. $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
  1309. $(call if_changed,binman)
  1310. ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
  1311. OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
  1312. u-boot-br.bin: u-boot FORCE
  1313. $(call if_changed,objcopy)
  1314. endif
  1315. endif
  1316. # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
  1317. # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
  1318. # the middle. This is handled by binman based on an image description in the
  1319. # board's device tree.
  1320. ifneq ($(CONFIG_X86_RESET_VECTOR),)
  1321. rom: u-boot.rom FORCE
  1322. refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
  1323. $(call if_changed,copy)
  1324. quiet_cmd_ldr = LD $@
  1325. cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
  1326. $(filter-out FORCE,$^) -o $@
  1327. u-boot.rom: u-boot-x86-start16.bin u-boot-x86-reset16.bin u-boot.bin \
  1328. $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
  1329. $(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
  1330. $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
  1331. $(call if_changed,binman)
  1332. OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
  1333. u-boot-x86-start16.bin: u-boot FORCE
  1334. $(call if_changed,objcopy)
  1335. OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
  1336. u-boot-x86-reset16.bin: u-boot FORCE
  1337. $(call if_changed,objcopy)
  1338. endif
  1339. ifneq ($(CONFIG_ARCH_SUNXI),)
  1340. ifeq ($(CONFIG_ARM64),)
  1341. u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
  1342. $(call if_changed,binman)
  1343. else
  1344. u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
  1345. $(call if_changed,cat)
  1346. endif
  1347. endif
  1348. ifneq ($(CONFIG_TEGRA),)
  1349. ifneq ($(CONFIG_BINMAN),)
  1350. # Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
  1351. %-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
  1352. spl/%-spl %.bin FORCE
  1353. $(call if_changed,binman)
  1354. else
  1355. OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  1356. u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
  1357. $(call if_changed,pad_cat)
  1358. OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
  1359. u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
  1360. $(call if_changed,pad_cat)
  1361. u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
  1362. $(call if_changed,copy)
  1363. endif # binman
  1364. endif
  1365. OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
  1366. u-boot-app.efi: u-boot FORCE
  1367. $(call if_changed,zobjcopy)
  1368. u-boot.bin.o: u-boot.bin FORCE
  1369. $(call if_changed,efipayload)
  1370. u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
  1371. $(call if_changed_dep,cpp_lds)
  1372. # Rule to link the EFI payload which contains a stub and a U-Boot binary
  1373. quiet_cmd_u-boot_payload ?= LD $@
  1374. cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
  1375. -T u-boot-payload.lds arch/x86/cpu/call32.o \
  1376. lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
  1377. $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
  1378. u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
  1379. $(call if_changed,u-boot_payload)
  1380. OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
  1381. u-boot-payload.efi: u-boot-payload FORCE
  1382. $(call if_changed,zobjcopy)
  1383. u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
  1384. $(call if_changed,cat)
  1385. #Add a target to create boot binary having SPL binary in PBI format
  1386. #concatenated with u-boot binary. It is need by PowerPC SoC having
  1387. #internal SRAM <= 512KB.
  1388. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
  1389. -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
  1390. -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
  1391. spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
  1392. $(call if_changed,mkimage)
  1393. ifeq ($(ARCH),arm)
  1394. UBOOT_BINLOAD := u-boot.img
  1395. else
  1396. ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
  1397. UBOOT_BINLOAD := u-boot-with-dtb.bin
  1398. else
  1399. UBOOT_BINLOAD := u-boot.bin
  1400. endif
  1401. endif
  1402. OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
  1403. --gap-fill=0xff
  1404. u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
  1405. $(call if_changed,pad_cat)
  1406. # PPC4xx needs the SPL at the end of the image, since the reset vector
  1407. # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
  1408. # and need to introduce a new build target with the full blown U-Boot
  1409. # at the start padded up to the start of the SPL image. And then concat
  1410. # the SPL image to the end.
  1411. OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
  1412. --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
  1413. u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
  1414. $(call if_changed,pad_cat)
  1415. quiet_cmd_u-boot-elf ?= LD $@
  1416. cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
  1417. -T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
  1418. -Ttext=$(CONFIG_SYS_TEXT_BASE)
  1419. u-boot.elf: u-boot.bin u-boot-elf.lds
  1420. $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
  1421. $(call if_changed,u-boot-elf)
  1422. u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
  1423. $(call if_changed_dep,cpp_lds)
  1424. # MediaTek's ARM-based u-boot needs a header to contains its load address
  1425. # which is parsed by the BootROM.
  1426. # If the SPL build is enabled, the header will be added to the spl binary,
  1427. # and the spl binary and the u-boot.img will be combined into one file.
  1428. # Otherwise the header will be added to the u-boot.bin directly.
  1429. ifeq ($(CONFIG_SPL),y)
  1430. spl/u-boot-spl-mtk.bin: spl/u-boot-spl
  1431. u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
  1432. $(call if_changed,binman)
  1433. else
  1434. MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
  1435. -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
  1436. -n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
  1437. u-boot-mtk.bin: u-boot.bin FORCE
  1438. $(call if_changed,mkimage)
  1439. endif
  1440. ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
  1441. # Rule to link u-boot
  1442. # May be overridden by arch/$(ARCH)/config.mk
  1443. quiet_cmd_u-boot__ ?= LD $@
  1444. cmd_u-boot__ ?= $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
  1445. -T u-boot.lds $(u-boot-init) \
  1446. --start-group $(u-boot-main) --end-group \
  1447. $(PLATFORM_LIBS) -Map u-boot.map; \
  1448. $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
  1449. quiet_cmd_smap = GEN common/system_map.o
  1450. cmd_smap = \
  1451. smap=`$(call SYSTEM_MAP,u-boot) | \
  1452. awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  1453. $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
  1454. -c $(srctree)/common/system_map.c -o common/system_map.o
  1455. u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE
  1456. +$(call if_changed,u-boot__)
  1457. ifeq ($(CONFIG_KALLSYMS),y)
  1458. $(call cmd,smap)
  1459. $(call cmd,u-boot__) common/system_map.o
  1460. endif
  1461. ifeq ($(CONFIG_RISCV),y)
  1462. @tools/prelink-riscv $@ 0
  1463. endif
  1464. quiet_cmd_sym ?= SYM $@
  1465. cmd_sym ?= $(OBJDUMP) -t $< > $@
  1466. u-boot.sym: u-boot FORCE
  1467. $(call if_changed,sym)
  1468. # The actual objects are generated when descending,
  1469. # make sure no implicit rule kicks in
  1470. $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
  1471. # Handle descending into subdirectories listed in $(u-boot-dirs)
  1472. # Preset locale variables to speed up the build process. Limit locale
  1473. # tweaks to this spot to avoid wrong language settings when running
  1474. # make menuconfig etc.
  1475. # Error messages still appears in the original language
  1476. PHONY += $(u-boot-dirs)
  1477. $(u-boot-dirs): prepare scripts
  1478. $(Q)$(MAKE) $(build)=$@
  1479. tools: prepare
  1480. # The "tools" are needed early
  1481. $(filter-out tools, $(u-boot-dirs)): tools
  1482. # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
  1483. # is "yes"), so compile examples after U-Boot is compiled.
  1484. examples: $(filter-out examples, $(u-boot-dirs))
  1485. define filechk_uboot.release
  1486. echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1487. endef
  1488. # Store (new) UBOOTRELEASE string in include/config/uboot.release
  1489. include/config/uboot.release: include/config/auto.conf FORCE
  1490. $(call filechk,uboot.release)
  1491. # Things we need to do before we recursively start building the kernel
  1492. # or the modules are listed in "prepare".
  1493. # A multi level approach is used. prepareN is processed before prepareN-1.
  1494. # archprepare is used in arch Makefiles and when processed asm symlink,
  1495. # version.h and scripts_basic is processed / created.
  1496. # Listed in dependency order
  1497. PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
  1498. # prepare3 is used to check if we are building in a separate output directory,
  1499. # and if so do:
  1500. # 1) Check that make has not been executed in the kernel src $(srctree)
  1501. prepare3: include/config/uboot.release
  1502. ifneq ($(KBUILD_SRC),)
  1503. @$(kecho) ' Using $(srctree) as source for U-Boot'
  1504. $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
  1505. echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
  1506. echo >&2 " in the '$(srctree)' directory.";\
  1507. /bin/false; \
  1508. fi;
  1509. endif
  1510. # prepare2 creates a makefile if using a separate output directory
  1511. prepare2: prepare3 outputmakefile cfg
  1512. prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \
  1513. include/config/auto.conf
  1514. ifeq ($(wildcard $(LDSCRIPT)),)
  1515. @echo >&2 " Could not find linker script."
  1516. @/bin/false
  1517. endif
  1518. ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
  1519. prepare1: $(defaultenv_h)
  1520. endif
  1521. archprepare: prepare1 scripts_basic
  1522. prepare0: archprepare FORCE
  1523. $(Q)$(MAKE) $(build)=.
  1524. # All the preparing..
  1525. prepare: prepare0
  1526. # Generate some files
  1527. # ---------------------------------------------------------------------------
  1528. define filechk_version.h
  1529. (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
  1530. echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
  1531. echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
  1532. echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
  1533. endef
  1534. # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
  1535. # The BSD date on the other hand behaves different and would produce errors
  1536. # with the misused '-d' switch. Respect that and search a working date with
  1537. # well known pre- and suffixes for the GNU variant of date.
  1538. define filechk_timestamp.h
  1539. (if test -n "$${SOURCE_DATE_EPOCH}"; then \
  1540. SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
  1541. DATE=""; \
  1542. for date in gdate date.gnu date; do \
  1543. $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
  1544. done; \
  1545. if test -n "$${DATE}"; then \
  1546. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1547. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
  1548. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
  1549. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1550. LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1551. else \
  1552. return 42; \
  1553. fi; \
  1554. else \
  1555. LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
  1556. LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
  1557. LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
  1558. LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
  1559. LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
  1560. fi)
  1561. endef
  1562. define filechk_defaultenv.h
  1563. (grep -v '^#' | \
  1564. grep -v '^$$' | \
  1565. tr '\n' '\0' | \
  1566. sed -e 's/\\\x0\s*//g' | \
  1567. xxd -i ; echo ", 0x00" ; )
  1568. endef
  1569. define filechk_dt.h
  1570. (if test -n "$${DEVICE_TREE}"; then \
  1571. echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
  1572. else \
  1573. echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
  1574. fi)
  1575. endef
  1576. $(version_h): include/config/uboot.release FORCE
  1577. $(call filechk,version.h)
  1578. $(timestamp_h): $(srctree)/Makefile FORCE
  1579. $(call filechk,timestamp.h)
  1580. $(dt_h): $(srctree)/Makefile FORCE
  1581. $(call filechk,dt.h)
  1582. $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
  1583. $(call filechk,defaultenv.h)
  1584. # ---------------------------------------------------------------------------
  1585. quiet_cmd_cpp_lds = LDS $@
  1586. cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
  1587. -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
  1588. u-boot.lds: $(LDSCRIPT) prepare FORCE
  1589. $(call if_changed_dep,cpp_lds)
  1590. spl/u-boot-spl.bin: spl/u-boot-spl
  1591. @:
  1592. $(SPL_SIZE_CHECK)
  1593. spl/u-boot-spl: tools prepare \
  1594. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
  1595. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
  1596. $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
  1597. spl/sunxi-spl.bin: spl/u-boot-spl
  1598. @:
  1599. spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
  1600. @:
  1601. spl/u-boot-spl.sfp: spl/u-boot-spl
  1602. @:
  1603. spl/boot.bin: spl/u-boot-spl
  1604. @:
  1605. tpl/u-boot-tpl.bin: tools prepare \
  1606. $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
  1607. $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
  1608. $(TPL_SIZE_CHECK)
  1609. TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
  1610. FIND := find
  1611. FINDFLAGS := -L
  1612. tags ctags:
  1613. ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1614. -name '*.[chS]' -print`
  1615. ln -s ctags tags
  1616. etags:
  1617. etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
  1618. -name '*.[chS]' -print`
  1619. cscope:
  1620. $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
  1621. cscope.files
  1622. @find $(TAG_SUBDIRS) -name '*.[chS]' -type l -print | \
  1623. grep -xvf - cscope.files > cscope.files.no-symlinks; \
  1624. mv cscope.files.no-symlinks cscope.files
  1625. cscope -b -q -k
  1626. SYSTEM_MAP = \
  1627. $(NM) $1 | \
  1628. grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
  1629. LC_ALL=C sort
  1630. System.map: u-boot
  1631. @$(call SYSTEM_MAP,$<) > $@
  1632. #########################################################################
  1633. # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
  1634. # R_AARCH64_RELATIVE (64-bit).
  1635. checkarmreloc: u-boot
  1636. @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
  1637. grep R_A | sort -u`"; \
  1638. if test "$$RELOC" != "R_ARM_RELATIVE" -a \
  1639. "$$RELOC" != "R_AARCH64_RELATIVE"; then \
  1640. echo "$< contains unexpected relocations: $$RELOC"; \
  1641. false; \
  1642. fi
  1643. tools/version.h: include/version.h
  1644. $(Q)mkdir -p $(dir $@)
  1645. $(call if_changed,copy)
  1646. envtools: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1647. $(Q)$(MAKE) $(build)=tools/env
  1648. tools-only: export TOOLS_ONLY=y
  1649. tools-only: scripts_basic $(version_h) $(timestamp_h) tools/version.h
  1650. $(Q)$(MAKE) $(build)=tools
  1651. tools-all: export HOST_TOOLS_ALL=y
  1652. tools-all: envtools tools ;
  1653. cross_tools: export CROSS_BUILD_TOOLS=y
  1654. cross_tools: tools ;
  1655. .PHONY : CHANGELOG
  1656. CHANGELOG:
  1657. git log --no-merges U-Boot-1_1_5.. | \
  1658. unexpand -a | sed -e 's/\s\s*$$//' > $@
  1659. #########################################################################
  1660. ###
  1661. # Cleaning is done on three levels.
  1662. # make clean Delete most generated files
  1663. # Leave enough to build external modules
  1664. # make mrproper Delete the current configuration, and all generated files
  1665. # make distclean Remove editor backup files, patch leftover files and the like
  1666. # Directories & files removed with 'make clean'
  1667. CLEAN_DIRS += $(MODVERDIR) \
  1668. $(foreach d, spl tpl, $(patsubst %,$d/%, \
  1669. $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
  1670. CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h tools/version.h \
  1671. boot* u-boot* MLO* SPL System.map fit-dtb.blob* \
  1672. u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log \
  1673. lpc32xx-* bl31.c bl31.elf bl31_*.bin image.map tispl.bin* \
  1674. idbloader.img flash.bin flash.log
  1675. # Directories & files removed with 'make mrproper'
  1676. MRPROPER_DIRS += include/config include/generated spl tpl \
  1677. .tmp_objdiff
  1678. MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
  1679. ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
  1680. drivers/video/fonts/*.S
  1681. # clean - Delete most, but leave enough to build external modules
  1682. #
  1683. clean: rm-dirs := $(CLEAN_DIRS)
  1684. clean: rm-files := $(CLEAN_FILES)
  1685. clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
  1686. clean-dirs := $(addprefix _clean_, $(clean-dirs))
  1687. PHONY += $(clean-dirs) clean archclean
  1688. $(clean-dirs):
  1689. $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
  1690. clean: $(clean-dirs)
  1691. $(call cmd,rmdirs)
  1692. $(call cmd,rmfiles)
  1693. @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
  1694. \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
  1695. -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
  1696. -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
  1697. -o -name '*.lex.c' -o -name '*.tab.[ch]' \
  1698. -o -name '*.asn1.[ch]' \
  1699. -o -name '*.symtypes' -o -name 'modules.order' \
  1700. -o -name modules.builtin -o -name '.tmp_*.o.*' \
  1701. -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
  1702. -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
  1703. -type f -print | xargs rm -f
  1704. # mrproper - Delete all generated files, including .config
  1705. #
  1706. mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
  1707. mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
  1708. mrproper-dirs := $(addprefix _mrproper_,scripts)
  1709. PHONY += $(mrproper-dirs) mrproper archmrproper
  1710. $(mrproper-dirs):
  1711. $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
  1712. mrproper: clean $(mrproper-dirs)
  1713. $(call cmd,rmdirs)
  1714. $(call cmd,rmfiles)
  1715. @rm -f arch/*/include/asm/arch
  1716. # distclean
  1717. #
  1718. PHONY += distclean
  1719. distclean: mrproper
  1720. @find $(srctree) $(RCS_FIND_IGNORE) \
  1721. \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
  1722. -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
  1723. -o -name '.*.rej' -o -name '*%' -o -name 'core' \
  1724. -o -name '*.pyc' \) \
  1725. -type f -print | xargs rm -f
  1726. @rm -f boards.cfg CHANGELOG
  1727. backup:
  1728. F=`basename $(srctree)` ; cd .. ; \
  1729. gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
  1730. help:
  1731. @echo 'Cleaning targets:'
  1732. @echo ' clean - Remove most generated files but keep the config'
  1733. @echo ' mrproper - Remove all generated files + config + various backup files'
  1734. @echo ' distclean - mrproper + remove editor backup and patch files'
  1735. @echo ''
  1736. @echo 'Configuration targets:'
  1737. @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
  1738. @echo ''
  1739. @echo 'Test targets:'
  1740. @echo ''
  1741. @echo ' check - Run all automated tests that use sandbox'
  1742. @echo ' qcheck - Run quick automated tests that use sandbox'
  1743. @echo ''
  1744. @echo 'Other generic targets:'
  1745. @echo ' all - Build all necessary images depending on configuration'
  1746. @echo ' tests - Build U-Boot for sandbox and run tests'
  1747. @echo '* u-boot - Build the bare u-boot'
  1748. @echo ' dir/ - Build all files in dir and below'
  1749. @echo ' dir/file.[oisS] - Build specified target only'
  1750. @echo ' dir/file.lst - Build specified mixed source/assembly target only'
  1751. @echo ' (requires a recent binutils and recent build (System.map))'
  1752. @echo ' tags/ctags - Generate ctags file for editors'
  1753. @echo ' etags - Generate etags file for editors'
  1754. @echo ' cscope - Generate cscope index'
  1755. @echo ' ubootrelease - Output the release version string (use with make -s)'
  1756. @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
  1757. @echo " cfg - Don't build, just create the .cfg files"
  1758. @echo " envtools - Build only the target-side environment tools"
  1759. @echo ''
  1760. @echo 'Static analysers'
  1761. @echo ' checkstack - Generate a list of stack hogs'
  1762. @echo ' coccicheck - Execute static code analysis with Coccinelle'
  1763. @echo ''
  1764. @echo 'Documentation targets:'
  1765. @$(MAKE) -f $(srctree)/doc/Makefile dochelp
  1766. @echo ''
  1767. @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
  1768. @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
  1769. @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
  1770. @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
  1771. @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
  1772. @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
  1773. @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
  1774. @echo ' 1: warnings which may be relevant and do not occur too often'
  1775. @echo ' 2: warnings which occur quite often but may still be relevant'
  1776. @echo ' 3: more obscure warnings, can most likely be ignored'
  1777. @echo ' Multiple levels can be combined with W=12 or W=123'
  1778. @echo ''
  1779. @echo 'Execute "make" or "make all" to build all targets marked with [*] '
  1780. @echo 'For further info see the ./README file'
  1781. tests check:
  1782. $(srctree)/test/run
  1783. qcheck:
  1784. $(srctree)/test/run quick
  1785. # Documentation targets
  1786. # ---------------------------------------------------------------------------
  1787. DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
  1788. linkcheckdocs dochelp refcheckdocs
  1789. PHONY += $(DOC_TARGETS)
  1790. $(DOC_TARGETS): scripts_basic FORCE
  1791. $(Q)$(MAKE) $(build)=doc $@
  1792. endif #ifeq ($(config-targets),1)
  1793. endif #ifeq ($(mixed-targets),1)
  1794. PHONY += checkstack ubootrelease ubootversion
  1795. checkstack:
  1796. $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
  1797. $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
  1798. ubootrelease:
  1799. @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
  1800. ubootversion:
  1801. @echo $(UBOOTVERSION)
  1802. # Single targets
  1803. # ---------------------------------------------------------------------------
  1804. # Single targets are compatible with:
  1805. # - build with mixed source and output
  1806. # - build with separate output dir 'make O=...'
  1807. # - external modules
  1808. #
  1809. # target-dir => where to store outputfile
  1810. # build-dir => directory in kernel source tree to use
  1811. ifeq ($(KBUILD_EXTMOD),)
  1812. build-dir = $(patsubst %/,%,$(dir $@))
  1813. target-dir = $(dir $@)
  1814. else
  1815. zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
  1816. build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
  1817. target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
  1818. endif
  1819. %.s: %.c prepare scripts FORCE
  1820. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1821. %.i: %.c prepare scripts FORCE
  1822. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1823. %.o: %.c prepare scripts FORCE
  1824. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1825. %.lst: %.c prepare scripts FORCE
  1826. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1827. %.s: %.S prepare scripts FORCE
  1828. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1829. %.o: %.S prepare scripts FORCE
  1830. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1831. %.symtypes: %.c prepare scripts FORCE
  1832. $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
  1833. # Modules
  1834. /: prepare scripts FORCE
  1835. $(cmd_crmodverdir)
  1836. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1837. $(build)=$(build-dir)
  1838. %/: prepare scripts FORCE
  1839. $(cmd_crmodverdir)
  1840. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1841. $(build)=$(build-dir)
  1842. %.ko: prepare scripts FORCE
  1843. $(cmd_crmodverdir)
  1844. $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
  1845. $(build)=$(build-dir) $(@:.ko=.o)
  1846. $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  1847. quiet_cmd_genenv = GENENV $@
  1848. cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
  1849. sed --in-place -e 's/\x00/\x0A/g' $@
  1850. u-boot-initial-env: u-boot.bin
  1851. $(call if_changed,genenv)
  1852. # Consistency checks
  1853. # ---------------------------------------------------------------------------
  1854. PHONY += coccicheck
  1855. coccicheck:
  1856. $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
  1857. # FIXME Should go into a make.lib or something
  1858. # ===========================================================================
  1859. quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
  1860. cmd_rmdirs = rm -rf $(rm-dirs)
  1861. quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
  1862. cmd_rmfiles = rm -f $(rm-files)
  1863. # read all saved command lines
  1864. targets := $(wildcard $(sort $(targets)))
  1865. cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
  1866. ifneq ($(cmd_files),)
  1867. $(cmd_files): ; # Do not try to update included dependency files
  1868. include $(cmd_files)
  1869. endif
  1870. endif # skip-makefile
  1871. PHONY += FORCE
  1872. FORCE:
  1873. # Declare the contents of the PHONY variable as phony. We keep that
  1874. # information in a variable so we can use it in if_changed and friends.
  1875. .PHONY: $(PHONY)