dreamplug.h 2.0 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283
  1. /* SPDX-License-Identifier: GPL-2.0+ */
  2. /*
  3. * (C) Copyright 2011
  4. * Jason Cooper <u-boot@lakedaemon.net>
  5. *
  6. * Based on work by:
  7. * Marvell Semiconductor <www.marvell.com>
  8. * Written-by: Siddarth Gore <gores@marvell.com>
  9. */
  10. #ifndef _CONFIG_DREAMPLUG_H
  11. #define _CONFIG_DREAMPLUG_H
  12. /*
  13. * High Level Configuration Options (easy to change)
  14. */
  15. #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
  16. #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
  17. /*
  18. * Commands configuration
  19. */
  20. /*
  21. * mv-plug-common.h should be defined after CMD configs since it used them
  22. * to enable certain macros
  23. */
  24. #include "mv-plug-common.h"
  25. /*
  26. * Environment variables configurations
  27. */
  28. #ifdef CONFIG_SPI_FLASH
  29. #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
  30. #endif
  31. #ifdef CONFIG_CMD_SF
  32. #define CONFIG_HARD_SPI 1
  33. #define CONFIG_ENV_SPI_BUS 0
  34. #define CONFIG_ENV_SPI_CS 0
  35. #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
  36. #endif
  37. /*
  38. * max 4k env size is enough, but in case of nand
  39. * it has to be rounded to sector size
  40. */
  41. #define CONFIG_ENV_SIZE 0x1000 /* 4k */
  42. #define CONFIG_ENV_ADDR 0x100000
  43. #define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
  44. /*
  45. * Default environment variables
  46. */
  47. #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
  48. "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
  49. "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  50. "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
  51. "bootm 0x6400000;"
  52. #define CONFIG_EXTRA_ENV_SETTINGS \
  53. "x_bootcmd_ethernet=ping 192.168.2.1\0" \
  54. "x_bootcmd_usb=usb start\0" \
  55. "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  56. "x_bootargs=console=ttyS0,115200\0" \
  57. "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
  58. /*
  59. * Ethernet Driver configuration
  60. */
  61. #ifdef CONFIG_CMD_NET
  62. #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
  63. #define CONFIG_PHY_BASE_ADR 0
  64. #endif /* CONFIG_CMD_NET */
  65. /*
  66. * SATA Driver configuration
  67. */
  68. #ifdef CONFIG_MVSATA_IDE
  69. #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
  70. #endif /*CONFIG_MVSATA_IDE*/
  71. #endif /* _CONFIG_DREAMPLUG_H */