MPC8548CDS.h 18 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579
  1. /*
  2. * Copyright 2004, 2007 Freescale Semiconductor.
  3. *
  4. * See file CREDITS for list of people who contributed to this
  5. * project.
  6. *
  7. * This program is free software; you can redistribute it and/or
  8. * modify it under the terms of the GNU General Public License as
  9. * published by the Free Software Foundation; either version 2 of
  10. * the License, or (at your option) any later version.
  11. *
  12. * This program is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15. * GNU General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software
  19. * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20. * MA 02111-1307 USA
  21. */
  22. /*
  23. * mpc8548cds board configuration file
  24. *
  25. * Please refer to doc/README.mpc85xxcds for more info.
  26. *
  27. */
  28. #ifndef __CONFIG_H
  29. #define __CONFIG_H
  30. /* High Level Configuration Options */
  31. #define CONFIG_BOOKE 1 /* BOOKE */
  32. #define CONFIG_E500 1 /* BOOKE e500 family */
  33. #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
  34. #define CONFIG_MPC8548 1 /* MPC8548 specific */
  35. #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */
  36. #define CONFIG_PCI /* enable any pci type devices */
  37. #define CONFIG_PCI1 /* PCI controller 1 */
  38. #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
  39. #undef CONFIG_RIO
  40. #undef CONFIG_PCI2
  41. #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
  42. #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
  43. #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
  44. #define CONFIG_TSEC_ENET /* tsec ethernet support */
  45. #define CONFIG_ENV_OVERWRITE
  46. #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
  47. #define CONFIG_FSL_LAW 1 /* Use common FSL init code */
  48. #define CONFIG_FSL_VIA
  49. #ifndef __ASSEMBLY__
  50. extern unsigned long get_clock_freq(void);
  51. #endif
  52. #define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */
  53. /*
  54. * These can be toggled for performance analysis, otherwise use default.
  55. */
  56. #define CONFIG_L2_CACHE /* toggle L2 cache */
  57. #define CONFIG_BTB /* toggle branch predition */
  58. /*
  59. * Only possible on E500 Version 2 or newer cores.
  60. */
  61. #define CONFIG_ENABLE_36BIT_PHYS 1
  62. #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
  63. #define CONFIG_SYS_MEMTEST_END 0x00400000
  64. /*
  65. * Base addresses -- Note these are effective addresses where the
  66. * actual resources get mapped (not physical addresses)
  67. */
  68. #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
  69. #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
  70. #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
  71. #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
  72. #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
  73. #define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000)
  74. #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
  75. /* DDR Setup */
  76. #define CONFIG_FSL_DDR2
  77. #undef CONFIG_FSL_DDR_INTERACTIVE
  78. #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
  79. #define CONFIG_DDR_SPD
  80. #define CONFIG_DDR_DLL /* possible DLL fix needed */
  81. #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
  82. #define CONFIG_MEM_INIT_VALUE 0xDeadBeef
  83. #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
  84. #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
  85. #define CONFIG_NUM_DDR_CONTROLLERS 1
  86. #define CONFIG_DIMM_SLOTS_PER_CTLR 1
  87. #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  88. /* I2C addresses of SPD EEPROMs */
  89. #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
  90. /* Make sure required options are set */
  91. #ifndef CONFIG_SPD_EEPROM
  92. #error ("CONFIG_SPD_EEPROM is required")
  93. #endif
  94. #undef CONFIG_CLOCKS_IN_MHZ
  95. /*
  96. * Local Bus Definitions
  97. */
  98. /*
  99. * FLASH on the Local Bus
  100. * Two banks, 8M each, using the CFI driver.
  101. * Boot from BR0/OR0 bank at 0xff00_0000
  102. * Alternate BR1/OR1 bank at 0xff80_0000
  103. *
  104. * BR0, BR1:
  105. * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
  106. * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
  107. * Port Size = 16 bits = BRx[19:20] = 10
  108. * Use GPCM = BRx[24:26] = 000
  109. * Valid = BRx[31] = 1
  110. *
  111. * 0 4 8 12 16 20 24 28
  112. * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
  113. * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
  114. *
  115. * OR0, OR1:
  116. * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
  117. * Reserved ORx[17:18] = 11, confusion here?
  118. * CSNT = ORx[20] = 1
  119. * ACS = half cycle delay = ORx[21:22] = 11
  120. * SCY = 6 = ORx[24:27] = 0110
  121. * TRLX = use relaxed timing = ORx[29] = 1
  122. * EAD = use external address latch delay = OR[31] = 1
  123. *
  124. * 0 4 8 12 16 20 24 28
  125. * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
  126. */
  127. #define CONFIG_SYS_BOOT_BLOCK 0xff000000 /* boot TLB block */
  128. #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 16M */
  129. #define CONFIG_SYS_BR0_PRELIM 0xff801001
  130. #define CONFIG_SYS_BR1_PRELIM 0xff001001
  131. #define CONFIG_SYS_OR0_PRELIM 0xff806e65
  132. #define CONFIG_SYS_OR1_PRELIM 0xff806e65
  133. #define CONFIG_SYS_FLASH_BANKS_LIST {0xff800000, CONFIG_SYS_FLASH_BASE}
  134. #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
  135. #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
  136. #undef CONFIG_SYS_FLASH_CHECKSUM
  137. #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
  138. #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
  139. #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
  140. #define CONFIG_FLASH_CFI_DRIVER
  141. #define CONFIG_SYS_FLASH_CFI
  142. #define CONFIG_SYS_FLASH_EMPTY_INFO
  143. /*
  144. * SDRAM on the Local Bus
  145. */
  146. #define CONFIG_SYS_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
  147. #define CONFIG_SYS_LBC_CACHE_SIZE 64
  148. #define CONFIG_SYS_LBC_NONCACHE_BASE 0xf8000000 /* Localbus non-cacheable */
  149. #define CONFIG_SYS_LBC_NONCACHE_SIZE 64
  150. #define CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_CACHE_BASE /* Localbus SDRAM */
  151. #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
  152. /*
  153. * Base Register 2 and Option Register 2 configure SDRAM.
  154. * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  155. *
  156. * For BR2, need:
  157. * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
  158. * port-size = 32-bits = BR2[19:20] = 11
  159. * no parity checking = BR2[21:22] = 00
  160. * SDRAM for MSEL = BR2[24:26] = 011
  161. * Valid = BR[31] = 1
  162. *
  163. * 0 4 8 12 16 20 24 28
  164. * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  165. *
  166. * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
  167. * FIXME: the top 17 bits of BR2.
  168. */
  169. #define CONFIG_SYS_BR2_PRELIM 0xf0001861
  170. /*
  171. * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  172. *
  173. * For OR2, need:
  174. * 64MB mask for AM, OR2[0:7] = 1111 1100
  175. * XAM, OR2[17:18] = 11
  176. * 9 columns OR2[19-21] = 010
  177. * 13 rows OR2[23-25] = 100
  178. * EAD set for extra time OR[31] = 1
  179. *
  180. * 0 4 8 12 16 20 24 28
  181. * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  182. */
  183. #define CONFIG_SYS_OR2_PRELIM 0xfc006901
  184. #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
  185. #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
  186. #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
  187. #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
  188. /*
  189. * Common settings for all Local Bus SDRAM commands.
  190. * At run time, either BSMA1516 (for CPU 1.1)
  191. * or BSMA1617 (for CPU 1.0) (old)
  192. * is OR'ed in too.
  193. */
  194. #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \
  195. | LSDMR_PRETOACT7 \
  196. | LSDMR_ACTTORW7 \
  197. | LSDMR_BL8 \
  198. | LSDMR_WRC4 \
  199. | LSDMR_CL3 \
  200. | LSDMR_RFEN \
  201. )
  202. /*
  203. * The CADMUS registers are connected to CS3 on CDS.
  204. * The new memory map places CADMUS at 0xf8000000.
  205. *
  206. * For BR3, need:
  207. * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
  208. * port-size = 8-bits = BR[19:20] = 01
  209. * no parity checking = BR[21:22] = 00
  210. * GPMC for MSEL = BR[24:26] = 000
  211. * Valid = BR[31] = 1
  212. *
  213. * 0 4 8 12 16 20 24 28
  214. * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
  215. *
  216. * For OR3, need:
  217. * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
  218. * disable buffer ctrl OR[19] = 0
  219. * CSNT OR[20] = 1
  220. * ACS OR[21:22] = 11
  221. * XACS OR[23] = 1
  222. * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
  223. * SETA OR[28] = 0
  224. * TRLX OR[29] = 1
  225. * EHTR OR[30] = 1
  226. * EAD extra time OR[31] = 1
  227. *
  228. * 0 4 8 12 16 20 24 28
  229. * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
  230. */
  231. #define CONFIG_FSL_CADMUS
  232. #define CADMUS_BASE_ADDR 0xf8000000
  233. #define CONFIG_SYS_BR3_PRELIM 0xf8000801
  234. #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7
  235. #define CONFIG_SYS_INIT_RAM_LOCK 1
  236. #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
  237. #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */
  238. #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
  239. #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
  240. #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
  241. #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
  242. #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
  243. #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
  244. /* Serial Port */
  245. #define CONFIG_CONS_INDEX 2
  246. #undef CONFIG_SERIAL_SOFTWARE_FIFO
  247. #define CONFIG_SYS_NS16550
  248. #define CONFIG_SYS_NS16550_SERIAL
  249. #define CONFIG_SYS_NS16550_REG_SIZE 1
  250. #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
  251. #define CONFIG_SYS_BAUDRATE_TABLE \
  252. {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
  253. #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
  254. #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
  255. /* Use the HUSH parser */
  256. #define CONFIG_SYS_HUSH_PARSER
  257. #ifdef CONFIG_SYS_HUSH_PARSER
  258. #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
  259. #endif
  260. /* pass open firmware flat tree */
  261. #define CONFIG_OF_LIBFDT 1
  262. #define CONFIG_OF_BOARD_SETUP 1
  263. #define CONFIG_OF_STDOUT_VIA_ALIAS 1
  264. /*
  265. * I2C
  266. */
  267. #define CONFIG_FSL_I2C /* Use FSL common I2C driver */
  268. #define CONFIG_HARD_I2C /* I2C with hardware support*/
  269. #undef CONFIG_SOFT_I2C /* I2C bit-banged */
  270. #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
  271. #define CONFIG_SYS_I2C_SLAVE 0x7F
  272. #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
  273. #define CONFIG_SYS_I2C_OFFSET 0x3000
  274. /* EEPROM */
  275. #define CONFIG_ID_EEPROM
  276. #define CONFIG_SYS_I2C_EEPROM_CCID
  277. #define CONFIG_SYS_ID_EEPROM
  278. #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
  279. #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
  280. /*
  281. * General PCI
  282. * Memory space is mapped 1-1, but I/O space must start from 0.
  283. */
  284. #define CONFIG_SYS_PCI_VIRT 0x80000000 /* 1G PCI TLB */
  285. #define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */
  286. #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
  287. #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
  288. #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
  289. #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
  290. #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
  291. #define CONFIG_SYS_PCI1_IO_BUS 0x00000000
  292. #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
  293. #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
  294. #ifdef CONFIG_PCI2
  295. #define CONFIG_SYS_PCI2_MEM_VIRT 0xa0000000
  296. #define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
  297. #define CONFIG_SYS_PCI2_MEM_PHYS 0xa0000000
  298. #define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
  299. #define CONFIG_SYS_PCI2_IO_VIRT 0xe2800000
  300. #define CONFIG_SYS_PCI2_IO_BUS 0x00000000
  301. #define CONFIG_SYS_PCI2_IO_PHYS 0xe2800000
  302. #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
  303. #endif
  304. #ifdef CONFIG_PCIE1
  305. #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000
  306. #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000
  307. #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000
  308. #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
  309. #define CONFIG_SYS_PCIE1_IO_VIRT 0xe3000000
  310. #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
  311. #define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000
  312. #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */
  313. #endif
  314. #ifdef CONFIG_RIO
  315. /*
  316. * RapidIO MMU
  317. */
  318. #define CONFIG_SYS_RIO_MEM_VIRT 0xC0000000
  319. #define CONFIG_SYS_RIO_MEM_BUS 0xC0000000
  320. #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */
  321. #endif
  322. #ifdef CONFIG_LEGACY
  323. #define BRIDGE_ID 17
  324. #define VIA_ID 2
  325. #else
  326. #define BRIDGE_ID 28
  327. #define VIA_ID 4
  328. #endif
  329. #if defined(CONFIG_PCI)
  330. #define CONFIG_NET_MULTI
  331. #define CONFIG_PCI_PNP /* do pci plug-and-play */
  332. #undef CONFIG_EEPRO100
  333. #undef CONFIG_TULIP
  334. #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
  335. #endif /* CONFIG_PCI */
  336. #if defined(CONFIG_TSEC_ENET)
  337. #ifndef CONFIG_NET_MULTI
  338. #define CONFIG_NET_MULTI 1
  339. #endif
  340. #define CONFIG_MII 1 /* MII PHY management */
  341. #define CONFIG_TSEC1 1
  342. #define CONFIG_TSEC1_NAME "eTSEC0"
  343. #define CONFIG_TSEC2 1
  344. #define CONFIG_TSEC2_NAME "eTSEC1"
  345. #define CONFIG_TSEC3 1
  346. #define CONFIG_TSEC3_NAME "eTSEC2"
  347. #define CONFIG_TSEC4
  348. #define CONFIG_TSEC4_NAME "eTSEC3"
  349. #undef CONFIG_MPC85XX_FEC
  350. #define TSEC1_PHY_ADDR 0
  351. #define TSEC2_PHY_ADDR 1
  352. #define TSEC3_PHY_ADDR 2
  353. #define TSEC4_PHY_ADDR 3
  354. #define TSEC1_PHYIDX 0
  355. #define TSEC2_PHYIDX 0
  356. #define TSEC3_PHYIDX 0
  357. #define TSEC4_PHYIDX 0
  358. #define TSEC1_FLAGS TSEC_GIGABIT
  359. #define TSEC2_FLAGS TSEC_GIGABIT
  360. #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
  361. #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
  362. /* Options are: eTSEC[0-3] */
  363. #define CONFIG_ETHPRIME "eTSEC0"
  364. #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
  365. #endif /* CONFIG_TSEC_ENET */
  366. /*
  367. * Environment
  368. */
  369. #define CONFIG_ENV_IS_IN_FLASH 1
  370. #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
  371. #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
  372. #define CONFIG_ENV_SIZE 0x2000
  373. #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
  374. #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
  375. /*
  376. * BOOTP options
  377. */
  378. #define CONFIG_BOOTP_BOOTFILESIZE
  379. #define CONFIG_BOOTP_BOOTPATH
  380. #define CONFIG_BOOTP_GATEWAY
  381. #define CONFIG_BOOTP_HOSTNAME
  382. /*
  383. * Command line configuration.
  384. */
  385. #include <config_cmd_default.h>
  386. #define CONFIG_CMD_PING
  387. #define CONFIG_CMD_I2C
  388. #define CONFIG_CMD_MII
  389. #define CONFIG_CMD_ELF
  390. #define CONFIG_CMD_IRQ
  391. #define CONFIG_CMD_SETEXPR
  392. #if defined(CONFIG_PCI)
  393. #define CONFIG_CMD_PCI
  394. #endif
  395. #undef CONFIG_WATCHDOG /* watchdog disabled */
  396. /*
  397. * Miscellaneous configurable options
  398. */
  399. #define CONFIG_SYS_LONGHELP /* undef to save memory */
  400. #define CONFIG_CMDLINE_EDITING /* Command-line editing */
  401. #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
  402. #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
  403. #if defined(CONFIG_CMD_KGDB)
  404. #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
  405. #else
  406. #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
  407. #endif
  408. #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
  409. #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
  410. #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
  411. #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
  412. /*
  413. * For booting Linux, the board info and command line data
  414. * have to be in the first 16 MB of memory, since this is
  415. * the maximum mapped by the Linux kernel during initialization.
  416. */
  417. #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
  418. /*
  419. * Internal Definitions
  420. *
  421. * Boot Flags
  422. */
  423. #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
  424. #define BOOTFLAG_WARM 0x02 /* Software reboot */
  425. #if defined(CONFIG_CMD_KGDB)
  426. #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
  427. #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
  428. #endif
  429. /*
  430. * Environment Configuration
  431. */
  432. /* The mac addresses for all ethernet interface */
  433. #if defined(CONFIG_TSEC_ENET)
  434. #define CONFIG_HAS_ETH0
  435. #define CONFIG_ETHADDR 00:E0:0C:00:00:FD
  436. #define CONFIG_HAS_ETH1
  437. #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
  438. #define CONFIG_HAS_ETH2
  439. #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
  440. #define CONFIG_HAS_ETH3
  441. #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
  442. #endif
  443. #define CONFIG_IPADDR 192.168.1.253
  444. #define CONFIG_HOSTNAME unknown
  445. #define CONFIG_ROOTPATH /nfsroot
  446. #define CONFIG_BOOTFILE 8548cds/uImage.uboot
  447. #define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */
  448. #define CONFIG_SERVERIP 192.168.1.1
  449. #define CONFIG_GATEWAYIP 192.168.1.1
  450. #define CONFIG_NETMASK 255.255.255.0
  451. #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
  452. #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
  453. #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
  454. #define CONFIG_BAUDRATE 115200
  455. #define CONFIG_EXTRA_ENV_SETTINGS \
  456. "netdev=eth0\0" \
  457. "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
  458. "tftpflash=tftpboot $loadaddr $uboot; " \
  459. "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
  460. "erase " MK_STR(TEXT_BASE) " +$filesize; " \
  461. "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
  462. "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
  463. "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
  464. "consoledev=ttyS1\0" \
  465. "ramdiskaddr=2000000\0" \
  466. "ramdiskfile=ramdisk.uboot\0" \
  467. "fdtaddr=c00000\0" \
  468. "fdtfile=mpc8548cds.dtb\0"
  469. #define CONFIG_NFSBOOTCOMMAND \
  470. "setenv bootargs root=/dev/nfs rw " \
  471. "nfsroot=$serverip:$rootpath " \
  472. "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
  473. "console=$consoledev,$baudrate $othbootargs;" \
  474. "tftp $loadaddr $bootfile;" \
  475. "tftp $fdtaddr $fdtfile;" \
  476. "bootm $loadaddr - $fdtaddr"
  477. #define CONFIG_RAMBOOTCOMMAND \
  478. "setenv bootargs root=/dev/ram rw " \
  479. "console=$consoledev,$baudrate $othbootargs;" \
  480. "tftp $ramdiskaddr $ramdiskfile;" \
  481. "tftp $loadaddr $bootfile;" \
  482. "tftp $fdtaddr $fdtfile;" \
  483. "bootm $loadaddr $ramdiskaddr $fdtaddr"
  484. #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
  485. #endif /* __CONFIG_H */